According to http://www.michael-whelan.net/replacing-appdomain-in-dotnet-core/ some AppDomain functionality were replaced in .NETCore.
But I can't find the way to be notified about every unhandled exception occurred in my application. Is there any way to do that?
Unfortunately, you need to wait for .NET Core 1.2
... AppDomain.UnhandledException came back with dotnet/corefx#11275.
Related
We are developing an application in salesforce which would be available soon in app-exchange.Is there any best way to get detailed error/exception from apex code of package org to owner of managed package so that in next version we can resolve this issue?
P.S. --> I know there is a setup to get unhandled exception but is there any way to get other errors/exception than unhandled exceptions?
I have a problem in catching the exceptions in my spring integration application.
Flow of operations in my application.
Http:inbound gateway which receives the request (error-channel defined to my custom error channel)
Service Activator for basic validations (Exceptions which are thrown from here are handled by error-channel defined on the GW)
splitter
Aggregator
Exceptions on my splitter or Aggregator are not handled by my error channel. why?
Steps taken:
I added a chain and included a header enricher and specified an error channel just before the splitter.
After this, any exception on my splitter is handled by my error channel mentioned in the header enricher.
<chain input-channel="invitations">
<header-enricher>
<error-channel ref="failed-invitations" />
</header-enricher>
<int:splitter ref="payloadSplitter" />
</chain>
But the same doesnt work when do the same on my Aggregator. why?
Whenever there is an exception in my code, it retries and gets executed more than one time. why?
I have a "errorChannel" defined which logs the exceptions. it doesnt work.
I know the thread is too old, but I was also facing a similar issue and found I declared error-channel in header-enricher but not provide 'overwrite="true"' as a parameter. And after providing 'overwrite="true"'it is working as needed. I am surprised why spring integration does not provide an overwrite=true by default.
Let us know this is what solution you did in your old code? So everyone can find out the solution for such a scenario.
I’m struggling fully understanding when/how exceptions are thrown in JSF 2.0. I’ve looked for a solution longer than I care to admit. Ultimately, the goal I want to achieve is “handle” an unhandled exceptions. When an exception is thrown, I want to be able to capture information of interest about the exception, and email that to the appropriate site administrators. I’m forcing an error by throwing a new FacesException() in the constructor of one of my backing beans. I had this working great in JSF 1.1 using MyFaces implementation. I was able to get this working by wrapping the Default Lifecycle and simply overriding the execute() and render() methods. I followed this awesome post by Hanspeter to get that working:
"http://insights2jsf.wordpress.com/2009/07/20/using-a-custom-lifecycle-implementation-to-handle-exceptions-in-jsf-1-2/#comment-103"
I am now undergoing a site upgrade to JSF 2.0 using Mojarra’s. And things work great still as long as the exception is thrown/caught in the execute() method, however; the moment I enter the render(), the HttpServletResponse.isCommitted() equals true, and the phase is PhaseId RENDER_RESPONSE which of course means I can’t perform a redirect or forward. I don’t understand what has changed between JSF 1.1 and 2.0 in regards to when/how the response is committed. As I indicated, I had this working perfectly in the 1.1 framework.
After much searching I found that JSF 2.0 provides a great option for exception handling via a Custom ExceptionHandler. I followed Ed Burns’ blog, Dealing Gracefully with ViewExpiredException in JSF2:
"http://weblogs.java.net/blog/edburns/archive/2009/09/03/dealing-gracefully-viewexpiredexception-jsf2"
As Ed indicates there is always the web.xml way by defining the tag and what type of exception/server error code and to what page one wants sent to for the error. This approach works great as long as I’m catching 404 errors. One interesting thing to note about that however, is if I force a 404 error by typing a non-exsitant URL like /myApp/9er the error handler works great, but as soon as I add “.xhtml” extension (i.e. /myApp/9er.xhtml) then the web.xml definition doesn’t handle it.
One thing I noticed Ed was doing that I hadn’t tried was instead of trying to do a HttpServletRespone.sendRedirect(), he is utilizing the Navigationhandler.handleNavigation() to forward the user to the custom error page. Unfortunately, this method didn’t do anything different than what Faclets does with the error by default. Along with that of course, I was unable to do HttpServletResponse.sendRedirect() due to the same problems as mentioned above; response.isCommitted() equals true.
I know this post is getting long so I will make a quick note about trying to use a PhaseListener for the same purposes. I used the following posts as a guide with this route still being unsuccessful:
"http://ovaraksin.blogspot.com/2010/10/global-handling-of-all-unchecked.html" "http://ovaraksin.blogspot.com/2010/10/jsf-ajax-redirect-after-session-timeout.html"
All and all I have the same issues as already mentioned. When this exception is thrown, the response is already in the committed phase, and I’m unable to redirect/forward the user to a standard error page.
I apologize for such a long post, I’m just trying to give as much information as possible to help eliminate ambiguity. Anyone have any ideas/thoughts to a work around, and I’m curious what might be different between JSF 1.1 and 2.0 that would cause the response to be committed as soon as I enter the render() phase of the Lifecycle.
Thanks a ton for any help with this!!!
So this question is actually not just about a custom exception handler (for which JSF 2 has the powerful ExceptionHandlerFactory mechanism), but more about showing the user a custom error page when the response has already been committed.
One universal way to always be able to redirect the user even if the last bit has already been written to the response is using a HttpServletResponse wrapper that buffers headers and content being written to it.
This does have the adverse effect that the user doesn't see the page being build up gradually.
Maybe you can use this technique to only capture the very early response commit that JSF 2.0 seems to do. As soon as render response starts, you emit the headers you buffered till so far and write out the response content directly.
This way you might still be able to redirect the user to a custom error page if the exception occurs before render response.
I have successfully implemented a filter using response wrapper as described above which avoids the response being commited and allows redirection to a custom page even on an exception in the middle of rendering the page.
The response wrapper sets up its own internal PrintWriter on a StringWriter, which is returned by the getWriter method so that the faces output is buffered. In the happy path, the filter subsequently writes the internal StringWriter contents to the actual response. On an exception, the filter redirects to an error jsp which writes to the (as yet uncommitted) response.
For me, the key to avoiding the response getting committed was to intercept the flushBuffer() method (from ServletResponse, not HttpServletResponse), and avoid calling super.flushBuffer(). I suspect that depending on circumstances and as noted above, it might also be necessary to also override some of the other methods, eg the ones that set headers.
How can we handle exceptions in Struts? Please share the sample code.
The following URL should help http://www.objectsource.com/j2eechapters/Ch18-Exception_Handling.htm
Use log4j to log the exceptions,
Never use System.out.println in struts application to catch exceptions, as it is expensive ,
Tutorials for log4j> http://logging.apache.org/log4j/1.2/manual.html
to handle the errors:
in struts project to handle the error objet by using ActionError object and to handle the errors by using ActionErrors object.
for suppose
ActionError ae1=new ActionError("err.one");
ActionError ae2=new ActionError("err.two");
Action Errors aes=new ActionErrors();
aes.add(ae1);
aes.add(ae2);
saveErrors(request,aes);//store the errors object in request object
to handle exception:
1)using try and cach blocks
2)using declarative exception handling technique
to handle the exceptions by using global exceptons tag in struts-config.xml
whenever that exception will be came it executes the gen.jsp page.
I am trying to figure out a clean way to intercept uncaught exceptions that occur in my application.
I have log4j configured for logging the normal application flow and caught exceptions, so that is taken care of. Right now, I have a class that takes all error-level messages and adds them to a queue to be emailed in batches.
Ideally, I'm hoping that there is a way I can go about intercepting the uncaught exceptions, so that I may pass them to the same 'email batch' queue, but if this is not posible, I'm certainly open to suggestion.
I'm familiar with LogInterceptors on JBoss, but this project is using Tomcat. Is there any way that I might go about this? Is there a LogInterceptor equivelant for Tomcat? Should I try to redirect the Tomcat logging to a custom appender? (If so - any hints on that?) Some other ideas?
I figured that this has to be a solved problem by now, so I am hoping to tap some collective wisdom. Thanks, everyone, in advance.
Per the J2EE 1.4 spec, uncaught exceptions within a servlet may be forwarded to an error page as defined in the deployment descriptor. When this happens, the page implementation will receive the original request and response objects, with the addition of a request attribute named javax.servlet.error.exception that contains the exception object.
That said, I have not actually done this with Tomcat, and most of the web applications that I've worked on forward to a generic error page at the webserver level.
Edit: just tried it out on my local server, after adding the following to my web.xml, and it works as advertised:
<error-page>
<exception-type>java.lang.Exception</exception-type>
<location>/dumpRequest.jsp</location>
</error-page>
It's not Tomcat-specific, but you can set uncaught exception handlers on a per-thread basis.
Depending on the setup of your application, you could set this at the top of your method that handles a request. You might have to do it every time, as you may get a thread per request.
A good place to set it would be in some sort of front controller.