CakePHP 3 - populate select dropdown with data from custom table - cakephp-3.0

So I started looking at CakePHP, and I'm just doing a few test cases to see if CakePHP will cater for all my needs.
I have a custom table (Table name: roles):
id role sub_site
1 Role 1 0
2 Role 2 0
3 Role 3 0
4 Role 4 0
5 Role 1 1
In my controller (User controler) I have the following code based on all the feedback here.
$this->loadModel("roles");
$rolesList = $this->roles->find('list', array(
'conditions' => array('sub_site' => '0'),
'fields' => array('id', 'role')
));
$this->set(compact('rolesList'));
I have the following in the view
$this->Form->input('role', array('label'=>false,
'div'=>false,
'type'=>'select',
'empty'=>'-- select one --',
'options'=>$rolesList));
Yet the output looks like this:
<select name="role" required="required" id="role">
<option value="">-- select one --</option>
<option value="1">1</option>
<option value="2">2</option>
<option value="3">3</option>
<option value="4">4</option>
</select>
All I want is the output as follows:
<select name="role" required="required" id="role">
<option value="">-- select one --</option>
<option value="1">Role 1</option>
<option value="2">Role 2</option>
<option value="3">Role 3</option>
<option value="4">Role 4</option>
</select>
Please indicate what is wrong here as this is suppose to be simple to just populate?

I am getting results using this method. In my controller:
$articles = TableRegistry::get('Transfers');
$make=$articles->find('list', ['keyField' => 'id','valueField' => 'make']);
$this->set('make',$make);
and then in view:
echo $this->Form->input('make',['type'=>'select','options'=>$make ,'empty'=>'-Select Make-','class'=>'form-control','templateVars'=>['class'=>'col-md-4']]);
Hope you will get results.

Related

Can you not select option by assigning value attribute to select element?

I've select element like this
<select name='type'>
<option value='1'> 1 </option>
<option value='2'> 2 </option>
<option value='3'> 3 </option>
</select>
on backend I want to select a value, like so.
<select name='type' value='2'>
<option value='1'> 1 </option>
<option value='2'> 2 </option>
<option value='3'> 3 </option>
</select>
This should have selected 2nd option, but it doesn't.
Does this not happen or is something else is wrong.
Chrome/windows
Edit
Had to go with boolean route, i was using pug/jade so it ended up like this
select#expiry(name="days")
option(value="7" selected=days=="7") 7 Days
option(value="14" selected=days=="14") 1 week
option(value="30" selected=days=="30") 1 Month
option(value="90" selected=days=="90") 3 Months
option(value="180" selected=days=="180") 6 Months
You're looking for this:
<select name='type'>
<option value='1'> 1 </option>
<option value='2' selected> 2 </option>
<option value='3'> 3 </option>
</select>
No you cannot: there is no value attribute on the select element.
The value of a select control is determined by the selected option child element's value attribute.
You can select an option by adding a selected boolean attribute to an option element is the source code.
<select name="type">
<option value="1" selected="selected"> 1 </option>
<option value="2"> 2 </option>
<option value="3"> 3 </option>
</select>
This can also be done dynamically via JavaScript.
var selectElement = document.getElementById('my-select');
selectElement.value = 2; // selects the second option
// even though the first one
// is selected in the HTML
<select name="type" id="my-select">
<option value="1" selected="selected"> 1 </option>
<option value="2"> 2 </option>
<option value="3"> 3 </option>
</select>

Selecting an option in drop down menu one determines list available in the second drop down menu

I want to make the contains of a second drop down menu dependent on what is selected in the the first. In my case wish to do it for a car selection option. i.e when the car make is selected this then populates the model drop down menu with the relevant models.
As there are a lot of makes of car I would like to keep it concise if possible I presume arrays of models for each make is the solution but how do implement this.
I have look at various solutions and cannot find a suitable answer to this, any suggestions/examples would be gratefully appreciated.
I am using jsp.
Make:<select>
<option value="audi">Audi</option>
<option value="bmw">BMW</option>
<option value="ford">Ford</option>
<option value="toyota">Toyota</option>
</select>
You could do it with some simple JS and css ( here is a JSFiddle: http://jsfiddle.net/N7Q57/1/)
Make:
<select name="cars" id="cars">
<option selected value="Choose">Choose</option>
<option value="Audi">Audi</option>
<option value="BMW">BMW</option>
<option value="Ford">Ford</option>
<option value="Toyota">Toyota</option>
</select>
<div id="brands">
<select class="audi">
<option value="1">1</option>
<option value="2">2</option>
</select>
<select class="bmw">
<option value="3">3</option>
<option value="4">4</option>
</select>
</div
the jQuery
$("#cars").change(function () {
var string = "";
string = $("select#cars option:selected").text();
if (string == "Audi"){
$("#brands .bmw").hide();
$("#brands .audi").show();
$("#brands").show();
} else if (string == "BMW"){
$("#brands .audi").hide();
$("#brands .bmw").show();
$("#brands").show();
}
})
and the CSS:
#brands{
display: none;
}

html multi <select> array in PHP post

<form>
<input class="date-pick" type="text" value="2010/08/02" name="date" />
<table id="events_selection">
<tr>
<td>
<img src="/admin/ajax/image.php?filename=/media/immagini/danieledaniela/1.jpg&maxw=200" />
<select name="1">
<option value="0"> NESSUN EVENTO </option>
<option value="5">anelli</option>
<option value="8">ballo</option>
<option value="6">cerimonia in chiesa</option>
<option value="13">dettagli</option>
<option value="9" selected="selected"><strong>festa</strong></option>
<option value="4">gli sposi</option>
<option value="1">la sposa</option>
<option value="3">lancio del riso</option>
<option value="2">lo sposo</option>
<option value="11">preparazione sposa</option>
<option value="10">preparazione sposo</option>
<option value="7">ristorante</option>
<option value="12">varie</option>
</select>
</td>
<td>
<img src="/admin/ajax/image.php?filename=/media/immagini/danieledaniela/30.jpg&maxw=200" />
<select name="31">
<option value="0"> NESSUN EVENTO </option>
<option value="5">anelli</option>
<option value="8">ballo</option>
<option value="6">cerimonia in chiesa</option>
<option value="13">dettagli</option>
<option value="9">festa</option>
<option value="4">gli sposi</option>
<option value="1">la sposa</option>
<option value="3">lancio del riso</option>
<option value="2">lo sposo</option>
<option value="11">preparazione sposa</option>
<option value="10">preparazione sposo</option>
<option value="7">ristorante</option>
<option value="12">varie</option>
</select>
</td>
</tr>
</table>
</form>​​​​​​​​
HI, in a situation like this (which is an example, there are many selects and other inputs) posting this form would give a $_POST like this
array {
date => "2010/08/09"
input1 => "bla"
input3 => "bla2"
//list of selection
1 => 2
2 => 4
3 => 5
//ends list of selection
input 4 => "bla4"
}
Can I directly from the HTML form put the <select>s in seperate array since they represent a grouped array?
array {
date => "2010/08/09"
input1 => "bla"
input3 => "bla2"
//list of selection
array {
1 => 2
2 => 4
3 => 5
}
//ends list of selection
input 4 => "bla4"
}
Thanks!
This:
<select name="selection[1]">
<option>1</option>
<option>2</option>
<option>3</option>
</select>
<select name="selection[2]">
<option>1</option>
<option>2</option>
<option>3</option>
</select>
Would return:
'selection' => array(1 => 1, 2 => 1)
Guess that's what you're looking for? :-)

How can I set the default value for an HTML <select> element?

I thought that adding a "value" attribute set on the <select> element below would cause the <option> containing my provided "value" to be selected by default:
<select name="hall" id="hall" value="3">
<option>1</option>
<option>2</option>
<option>3</option>
<option>4</option>
<option>5</option>
</select>
However, this did not work as I had expected. How can I set which <option> element is selected by default?
Set selected="selected" for the option you want to be the default.
<option selected="selected">
3
</option>
In case you want to have a default text as a sort of placeholder/hint but not considered a valid value (something like "complete here", "select your nation" ecc.) you can do something like this:
<select>
<option value="" selected disabled hidden>Choose here</option>
<option value="1">One</option>
<option value="2">Two</option>
<option value="3">Three</option>
<option value="4">Four</option>
<option value="5">Five</option>
</select>
Complete example:
<select name="hall" id="hall">
<option>1</option>
<option>2</option>
<option selected>3</option>
<option>4</option>
<option>5</option>
</select>
I came across this question, but the accepted and highly upvoted answer didn't work for me. It turns out that if you are using React, then setting selected doesn't work.
Instead you have to set a value in the <select> tag directly as shown below:
<select value="B">
<option value="A">Apple</option>
<option value="B">Banana</option>
<option value="C">Cranberry</option>
</select>
Read more about why here on the React page.
You can do it like this:
<select name="hall" id="hall">
<option> 1 </option>
<option> 2 </option>
<option selected> 3 </option>
<option> 4 </option>
<option> 5 </option>
</select>
Provide "selected" keyword inside the option tag, which you want to appear by default in your drop down list.
Or you can also provide attribute to the option tag i.e.
<option selected="selected">3</option>
if you want to use the values from a Form and keep it dynamic try this with php
<form action="../<SamePage>/" method="post">
<?php
$selected = $_POST['select'];
?>
<select name="select" size="1">
<option <?php if($selected == '1'){echo("selected");}?>>1</option>
<option <?php if($selected == '2'){echo("selected");}?>>2</option>
</select>
</form>
Best way in my opinion:
<select>
<option value="" selected="selected" hidden="hidden">Choose here</option>
<option value="1">One</option>
<option value="2">Two</option>
<option value="3">Three</option>
<option value="4">Four</option>
<option value="5">Five</option>
</select>
Why not disabled?
When you use disabled attribute together with <button type="reset">Reset</button> value is not reset to original placeholder. Instead browser choose first not disabled option which may cause user mistakes.
Default empty value
Every production form has validation, then empty value should not be a problem. This way we may have empty not required select.
XHTML syntax attributes
selected="selected" syntax is the only way to be compatible with both XHTML and HTML 5. It is correct XML syntax and some editors may be happy about this. It is more backward compatible. If XML compliance is important you should follow the full syntax.
I prefer this:
<select>
<option selected hidden>Choose here</option>
<option value="1">One</option>
<option value="2">Two</option>
<option value="3">Three</option>
<option value="4">Four</option>
<option value="5">Five</option>
</select>
'Choose here' disappears after an option has been selected.
An improvement for nobita's answer. Also you can improve the visual view of the drop down list, by hiding the element 'Choose here'.
<select>
<option selected disabled hidden>Choose here</option>
<option value="1">One</option>
<option value="2">Two</option>
<option value="3">Three</option>
<option value="4">Four</option>
<option value="5">Five</option>
</select>
Another example; using JavaScript to set a selected option.
(You could use this example to for loop an array of values into a drop down component)
<select id="yourDropDownElementId"><select/>
// Get the select element
var select = document.getElementById("yourDropDownElementId");
// Create a new option element
var el = document.createElement("option");
// Add our value to the option
el.textContent = "Example Value";
el.value = "Example Value";
// Set the option to selected
el.selected = true;
// Add the new option element to the select element
select.appendChild(el);
The selected attribute is a boolean attribute.
When present, it specifies that an option should be pre-selected when the page loads.
The pre-selected option will be displayed first in the drop-down list.
<select>
<option value="volvo">Volvo</option>
<option value="saab">Saab</option>
<option value="vw">VW</option>
<option value="audi" selected>Audi</option>
</select>
If you are in react you can use defaultValue as attribute instead of value in the select tag.
If you are using select with angular 1, then you need to use ng-init, otherwise, second option will not be selected since, ng-model overrides the defaul selected value
<select ng-model="sortVar" ng-init='sortVar="stargazers_count"'>
<option value="name">Name</option>
<option selected="selected" value="stargazers_count">Stars</option>
<option value="language">Language</option>
</select>
I would just simply make the first select option value the default and just hide that value in the dropdown with HTML5's new "hidden" feature. Like this:
<select name="" id="">
<option hidden value="default">Select An Option</option>
<option value="1">One</option>
<option value="2">Two</option>
<option value="3">Three</option>
<option value="4">Four</option>
</select>
value attribute of tag is missing, so it doesn't show as u desired selected. By default first option show on dropdown page load, if value attribute is set on tag.... I got solved my problem this way
This example has been tested to work with multiple <select> elements on the page, and can also work with normal text elements. It has not been tested for setting the value to more than one selection when <select multiple="true">, however you can probably modify this sample to support that.
Add an attribute data-selected to each <select> element and set the value(s) to the value of the option you wish to have selected.
Use javascript's querySelectorAll() to select all elements that have the custom attribute you just added.
In the following example, when run, the first <select> should show option with the value user as selected, and the second <select> should show the option with the value admin as selected.
document.querySelectorAll('[data-selected]').forEach(e => {
e.value = e.dataset.selected
});
<select data-selected="user" class="form-control" name="role">
<option value="public">
Pubblica
</option>
<option value="user">
Utenti
</option>
<option value="admin">
Admin
</option>
</select>
<select data-selected="admin" class="form-control" name="role2">
<option value="public">
Pubblica
</option>
<option value="user">
Utenti
</option>
<option value="admin">
Admin
</option>
</select>
I used this php function to generate the options, and insert it into my HTML
<?php
# code to output a set of options for a numeric drop down list
# parameters: (start, end, step, format, default)
function numericoptions($start, $end, $step, $formatstring, $default)
{
$retstring = "";
for($i = $start; $i <= $end; $i = $i + $step)
{
$retstring = $retstring . '<OPTION ';
$retstring = $retstring . 'value="' . sprintf($formatstring,$i) . '"';
if($default == $i)
{
$retstring = $retstring . ' selected="selected"';
}
$retstring = $retstring . '>' . sprintf($formatstring,$i) . '</OPTION> ';
}
return $retstring;
}
?>
And then in my webpage code I use it as below;
<select id="endmin" name="endmin">
<?php echo numericoptions(0,55,5,'%02d',$endmin); ?>
</select>
If $endmin is created from a _POST variable every time the page is loaded (and this code is inside a form which posts) then the previously selected value is selected by default.
This code sets the default value for the HTML select element with PHP.
<select name="hall" id="hall">
<?php
$default = 3;
$nr = 1;
while($nr < 10){
if($nr == $default){
echo "<option selected=\"selected\">". $nr ."</option>";
}
else{
echo "<option>". $nr ."</option>";
}
$nr++;
}
?>
</select>
You can use:
<option value="someValue" selected>Some Value</option>
instead of,
<option value="someValue" selected = "selected">Some Value</option>
both are equally correct.
Set selected="selected" where is option value is 3
please see below example
<option selected="selected" value="3" >3</option>
I myself use it
<select selected=''>
<option value=''></option>
<option value='1'>ccc</option>
<option value='2'>xxx</option>
<option value='3'>zzz</option>
<option value='4'>aaa</option>
<option value='5'>qqq</option>
<option value='6'>wwww</option>
</select>
You just need to put attribute "selected" on a particular option instead direct to select element.
Here is snippet for same and multiple working example with different values.
Select Option 3 :-
<select name="hall" id="hall">
<option>1</option>
<option>2</option>
<option selected="selected">3</option>
<option>4</option>
<option>5</option>
</select>
<br/>
<br/>
<br/>
Select Option 5 :-
<select name="hall" id="hall">
<option>1</option>
<option>2</option>
<option>3</option>
<option>4</option>
<option selected="selected">5</option>
</select>
<br/>
<br/>
<br/>
Select Option 2 :-
<select name="hall" id="hall">
<option>1</option>
<option selected="selected">2</option>
<option>3</option>
<option>4</option>
<option>5</option>
</select>
Default selected value is Option-4
<html:select property="status" value="OPTION_4" styleClass="form-control">
<html:option value="">Select</html:option>
<html:option value="OPTION_1" >Option-1</html:option>
<html:option value="OPTION_2" >Option-2</html:option>
<html:option value="OPTION_3" >Option-3</html:option>
<html:option value="OPTION_4" >Option-4</html:option>
<html:option value="OPTION_5" >Option-5</html:option>
</html:select>
You will need an "id" attribute in each option for this solution to work:
<script>
function select_option (id,value_selected) {
var select;
select = document.getElementById(id);
if (select == null) return 0;
var option;
option = select.options.namedItem(value_selected);
if (option == null) return 0;
option.selected = "selected";
return true;
}
</script>
<select name="hall" id="hall">
<option id="1">1</option>
<option id="2">2</option>
<option id="3">3</option>
<option id="4">4</option>
<option id="5">5</option>
</select>
<script>select_option ("hall","3");</script>
The function first tries to find the <select> with the id, then it will search for the value_selected in the <select> options and if it finds it, it will set the selected attribute returning true. False otherwise
The problem with <select> is, it's sometimes disconnected with the state of what's currently rendered and unless something has changed in the option list, no change value is returned. This can be a problem when trying to select the first option from a list. The following code can get the first-option the first-time selected, but onchange="changeFontSize(this)" by its self would not. There are methods described above using a dummy option to force a user to make a change value to pickup the actual first value, such as starting the list with an empty value. Note: onclick would call the function twice, the following code does not, but solves the first-time problem.
<label>Font Size</label>
<select name="fontSize" id="fontSize" onfocus="changeFontSize(this)" onchange="changeFontSize(this)">
<option value="small">Small</option>
<option value="medium">Medium</option>
<option value="large">Large</option>
<option value="extraLarge">Extra large</option>
</select>
<script>
function changeFontSize(x){
body=document.getElementById('body');
if (x.value=="extraLarge") {
body.style.fontSize="25px";
} else {
body.style.fontSize=x.value;
}
}
</script>
I use Angular and i set the default option by
HTML Template
<select #selectConnection [(ngModel)]="selectedVal" class="form-control col-sm-6 " max-width="100px" title="Select"
data-size="10">
<option >test1</option>
<option >test2</option>
</select>
Script:
sselectedVal:any="test1";
You can try like this
<select name="hall" id="hall">
<option>1</option>
<option>2</option>
<option selected="selected">3</option>
<option>4</option>
<option>5</option>
</select>
To set the default using PHP and JavaScript:
State: <select id="State">
<option value="" selected disabled hidden></option>
<option value="Andhra Pradesh">Andhra Pradesh</option>
<option value="Andaman and Nicobar Islands">Andaman and Nicobar Islands</option>
.
.
<option value="West Bengal">West Bengal</option>
</select>
<?php
if(isset($_GET['State'])){
echo <<<heredoc
<script>
document.getElementById("State").querySelector('option[value="{$_GET['State']}"]').selected = true;
</script>
heredoc;
}
?>
This is simple method to make default option selected.
Can be used for multiple selects on an HTML page.
The method:
Find every select
Read the id and value of that select
Make the option selected
Note:
Every select must have ID to avoid conflict
$(document).ready(function() {
// Loop for every select in page
$('select').each(function(index, id) {
// Get the value
var theValue = $(this).attr('value');
// Get the ID
var theID = $(this).attr('id');
// Make option selected
$('select#' + theID + ' option[value=' + theValue + ']').attr('selected', true);
});
});
<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/2.0.0/jquery.min.js"></script>
<select id="sport" name="sport" class="autoselect" value="golf">
<option value="basket">Basket Ball</option>
<option value="tennis">Tennis</option>
<option value="golf">Golf</option>
<option value="bowling">Bowling</option>
</select>
<hr>
<select id="tools" name="tools" class="autoselect" value="saw">
<option value="hammer">Hammer</option>
<option value="drill">Drill</option>
<option value="screwdriver">Screwdriver</option>
<option value="saw">Saw</option>
<option value="wrench">Wrench</option>
</select>
I was having some troubles with it because I need some way to choose the option dynamically accordingly to the value that I have in the database. The script bellow works like a charm to me:
<?php
//pick the value of database
$selected_sexo = $query['s_sexo'];
?>
<select name="s_sexo" id="s_sexo" required>
<option <?php if($selected_sexo == 'M'){echo("selected");}?> value="M">M</option>
<option <?php if($selected_sexo == 'F'){echo("selected");}?> value="F">F</option>
</select>

Multiple selection problem in a list box

Is there any way through which we can get all the selected values in a list box?
do you mean
<select name="foo" MULTIPLE>
<option value="bar1" >Option 1</option>
<option value="bar2" >Option 2</option>
<option value="bar3" >Option 3</option>
</select>
so that the end user can select multiple items in a form?
If you're using PHP, you can give the select an array-style name:
<select name="items[]" multiple>
<option value="option-1">Option 1</option>
<option value="option-2">Option 2</option>
<option value="option-3">Option 3</option>
</select>
Accessing these values from the server-side is rather simple:
<?php
foreach ($_POST["items"] as $value) {
echo $value . "<br/>";
}
?>