I downloaded and installed the NuGet Package: Select.Pdf. At runtime, when I click on the button that utilizes the code using the Select.Pdf namespace, I get the following exception:
The package is in the proper file directory and is properly installed, as you can see via the packages.config file:
<?xml version="1.0" encoding="utf-8"?>
<packages>
<package id="Select.Pdf" version="16.4.0.1" targetFramework="net452" />
</packages>
I've been fighting with this for 2 weeks and I'm pretty much over it. Has anyone ever encountered this? Does anyone know how to fix this?
Possible fixes for this issue:
Please check whether Nuget package restore is enabled and the
packages are restored properly.
A folder called packages will be added to the folder where the solution file (.sln) exists when you build the solution or restore NuGet packages.
Please check the reference path to the assembly in your project file
and the actual location of the assembly is same.
If both project (.csproj) and solution(.sln) files are in the same folder then it will be packages/select.pdf in your project file
The version you are using in code and referencing can also cause the
mismatch.
Ensure the assembly version restored and referred in the project file are same.
Related
This issue has been reported on GitHub here -
https://github.com/TorbenK/TK.CustomMap/issues/325
Has anyone else has struggled with this? I was stoked to find this nuget package because it does exactly what I'm looking for but it needs Places and some other GooglePlayServices installed and I can't install them because of this conflict.
I'm also not sure if uninstalling TK.CustomMap and then installing the Play Services would even help because the person who reported the issue on GitHub said-
I converted my app to .net 2.0 and had to use the newest Google play services
60.1142.1 for AdMob to work. It wouldn't install until I uninstalled TK.CustomMap, and now TK.CustomMap won't reinstall because it only want to use GooglePlayServices 42.1021.1
Severity Code Description Project File Line Suppression State
Error NU1107 Version conflict detected for Xamarin.GooglePlayServices.Tasks. Reference the package directly from the project to resolve this issue.
HunterTracker.Android -> Xamarin.GooglePlayServices.Base 60.1142.1 -> Xamarin.GooglePlayServices.Tasks (= 60.1142.1)
HunterTracker.Android -> HunterTracker -> TK.CustomMap 2.0.1 -> Xamarin.GooglePlayServices.Location 42.1021.1 -> Xamarin.GooglePlayServices.Tasks (= 42.1021.1).
That's pretty much the exact error I'm getting trying to install the other packages. There's no resolution on github.
Anybody found a work around? Or does anyone know how to "Reference the package directly from the project"?
Thanks to SushiHangover's comments above pointing me in the right direction I was able to discover what I needed to do here. I had an error updating the nuget packages of TK.CustomMap at first because v26 Xamarin.Android.Support.Vector.Drawable was targeting MonoAndroid8.0 and the update to v27 must target MonoAndroid8.1 So it took quite a bit just to be able to update the nuget packages in order to get the assemblies with later versions so I could use TK.CustomMap in my solution. But I was eventually able to get there. Here were the steps I followed (as best I can remember). I am unable to compile ios right now because I don't have a MAC so that fix will have to come later. This fix is for the shared project and Android project only
Download the TK.CustomMap-master from github
Extract it and delete the Sample project completely (I also deleted the UWP project as I'm not really interested in that at this time)
Opened and built then closed. Deleted packages folder, vs folder, bin and obj from Android and Shared Project (this step is probably not necessary but I did it so...)
In the packages.config in Android changed all targets from monoandroid80 to monoandroid81 save file
In the TK.CustomMap.Android.csproj for every v26.0.1 of any Xamarin.Android.Support or other Xamarin.Android util package changed 26.0.1\lib\MonoAndroid80 to 27.0.2.1\lib\MonoAndroid81 - save file
In the nuget folder in TK.CustomMap.nuspec changed the target framework in this section
<group targetFramework="lib\MonoAndroid7.0">
<dependency id="Xamarin.GooglePlayServices.Location" version="42.1021.1" />
<dependency id="Xamarin.GooglePlayServices.Places" version="42.1021.1" />
<dependency id="Xamarin.Android.Maps.Utils" version="0.5.0" />
<dependency id="Xamarin.Forms" version="2.5.0.91635" />
<dependency id="Newtonsoft.Json" version="10.0.3" />
</group>
to
<group targetFramework="lib\MonoAndroid">
so it could target any version
Opened and updated all nuget packages using package manager (not console). Built debug and release builds
At this point opened solution I had tried to implement TK.CustomMap in previously to attempt the fix. Remember the original issues was that the latest frameworks could not be used and 42.1021.1 frameworks were unable to locate com.google.gms.location and com.google.gms.places.ui files so they had to be updated or no TK.CustomMap
In the problem solution uninstalled TK.CustomMap from all projects
In the problem solution Android project added reference to all the dlls in the release folder of the Android bin file from TK.CustomMap project.
Installed updates for all Xamarin.Android frameworks in problem solution through Package Manager (not console)
Installed updates of all other nuget packages for all projects using Package Manager (not console)
Installed TK.CustomMap to Shared project using Package Manager (not console)
Added the References to the android project a second time. May or may not have helped.
Installed TK.CustomMap Nuget Package using Package Manager (not console)
Built and ran on Live Player successfully!!
Thanks to Sushi Hangover for the advice. I haven't seen any comprehensive tutorials anywhere on how to accomplish this so I figured I would post my own answer in case anyone else was looking. Definitely if you are new to VS all this stuff is no walk in the park in the beginning.
Thanks to #Travis Fleenor. This is my solution. I change a bit your sequence in order to work on mine.
1. Make sure the original proyect from github (https://github.com/TorbenK/TK.CustomMap) works and you can run it.
2. Update the nugets where you get the conflict. In my case I got conflicted in googleplay library version. I updated it in the original proyect and then assure it could run it.
3. Compile entire solution in release mode. Then, copied the generated dll from bin/release and pasted them in a folder in my desktop.
4. I referenced those dll to shared proyect and android proyect. I only used nuget package manager to install some missing packages needed for the tk.custom. Notice that you only will reference some dll that the proyect accept. For the mayority Visual will prompt ' dll already referenced' something.
5. first reference your shared proyect, later your android one. That's all. make sure the you ca recompile solution.
Hope this helps
I ran into a error in visual studio 2017, I'm searching over the net but I don't find anything usefull, so my question is, how can I solve this:
Severity Code Description Project File Line Suppression State
Error Your project.json doesn't have a runtimes section. You should add '"runtimes": { "win": { } }' to your project.json and then re-run NuGet restore.
I was seaching for file where is located in my project but with no succsess.
Thanks
I got rid of this problem by manually deleting Visual Studio obj folder of the project that it's complaining about (the 'Clean Solution' command wasn't getting rid of it).
I found the answer through this and this threads.
I had the same issue after trying to migrate all my projects to the new .csproj format manually. I had an issue with one projet in the new format, so I reverted from git, and this message started to show up.
What I did:
Closed VS
Removed the .vs folder
Removed the packages folder
Restarted VS
Tried to build
Had issues with namespaces not found, as if packages were not installed
Opened NuGet package manager console
Ran Update-Package -reinstall -ProjectName <project>
Problem gone!
Hope it helps someone with the same issue :)
I upgraded a NuGet Package.
Then I undid some changes for the project, but the NuGet Packege had created a json file called project inside the project folder.
Inside this file, I could find runtimes.
But I just deleted this json file and built again.
I'm using the CodePlex-hosted Microsoft.SqlServer.IntegrationServices.Build project to build a DLL that contains the MSBuild tasks for building SSIS packages via MSBuild.exe.
I also am using an MSBuild proj file that's floating around the web.
More here:
https://speaksql.wordpress.com/2013/06/07/a-journey-to-db-deployment-automaton-ssis-build-using-msbuild/
I've opened the CodePlex project, disabled signing, switched it to 4.6.1 and built the DLL and corrected paths etc. and go it semi-working. However MSBuild spits this error:
Could not load file or assembly 'Microsoft.SqlServer.DTSRuntimeWrap, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
I've installed SSDT latest for Visual Studio 2015. I have various SQL Server editions installed on my dev PC. The DLL seems to be present; I've copied all I need into one folder for the moment.
Open the CodePlex project again and remove the reference to Microsoft.SqlServer.ManagedDTS.
Look on your local disk for the missing Microsoft.SqlServer.DTSRuntimeWrap.dll and note the version(s) you have available.
Now look on your disk for Microsoft.SqlServer.ManagedDTS.dll and note the version(s).
Re-add the reference but make sure you pick a DLL for which you also have the version of the 'wrap' available.
Now make sure those DLLs are (re)copied over into your working folder or whatever.
If you're still having problems, you may need to copy some files around so that MSBuild.exe can find them or edit/create a config file for MSBuild.
How to solve: Custom MSBuild task requires assembly outside of AppBase
We've got a project using Ormlite.MySql built for .NET 4.0.
Ormlite and its dependencies are loaded via NuGet (it's ServiceStack.Ormlite.MySql 3.9.54), including MySql.Data 6.6.5.
When we try to run the code, however, we get a dependency error:
Could not load file or assembly 'MySql.Data, Version=6.6.4.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d' or one of its dependencies. The system cannot find the file specified.
The ServiceStack.OrmLite.MySql package in NuGet lists MySql.Data as a dependency, but doesn't list any specific version. In reflector, I can see that ServiceStack.OrmLite.MySql.dll is, in fact, referencing 6.6.4.0 of MySql.Data.dll.
Has anyone encountered this issue? I hate to hack the config file to redirect assmbly binding in general (always feels like a kludge).
I've just encountered the same problem. I solved it by downloading the Mysql.data.dll version 6.6.4.0 from servicestack on github: https://github.com/ServiceStack/ServiceStack.OrmLite/blob/master/lib/MySql.Data.dll
I had the same error. Just install with nuget : Mysql.data (it work for me)
nuget install the right version : "6.6.4"
(you could verify the version number in the nuget description)
I'm trying to call a MySQL database located on another server, from Azure.
I'm referencing .Net MySql.Data, and it works when running it in a test application.
However when I deploy the code to the Azure server I get the following exception:
Could not load file or assembly 'MySql.Data, Version=6.5.4.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d' or one of its dependencies. The system cannot find the file specified.
Since it's part of .Net I would expect it to work on Azure so I suspect I may be doing something wrong.
I also tried adding the MySql.Data.dll to the project and installing it to the CAG with no luck. (However I'm not certain it was installed successfully)
Any help or advice would be much appreciated.
Why are you assuming MySql.Data is part of .NET? The connector was written in .NET, it's not part of .NET. You will need to make sure the assembly is available in your instances. Since copy local didn't work (it should work...), try the following:
Add both gacutil.exe and MySql.Data.dll in a folder (mysql for example) in your project and set Copy to Output Directory to always.
Then create a startup task that calls gacutil.exe and installs the assembly, something like: mysql\gacutil.exe /i mysql\MySql.Data.dll
Note: I'm assuming you're using a Web Role.