I updated from ST2 to ST3 and transferred all my packages over to ST3. All of my packages seem to work but when I try to view my packages through Tools>Packages I don't see anything. I'm also given an error message of "“Emmet” can’t be found." when trying to list any of my installed packages. Has anyone come across this? I found a patch on Github but it didn't work.
I followed this guide when I originally migrated and all my packages worked fine. I ended doing this process again and transferred all my ST2 packages over again. Everything looks good so far and I can list and view packages.
Instead of transferring you might need to reinstall all of the packages. I'm not sure, but this could be caused by differences between the versions.
Related
I'm trying to initiate astro. When i don't choose a framework i get this error although i have git installed and fully working. Any help will be highly appreciated.
√ Which frameworks would you like to use? »
> Copying project files...
could not find commit hash for latest
This seems to be an issue with degit. Please check if you have 'git' installed on your system, and install it if you don't have (https://git-scm.com).
If you do have 'git' installed, please file a new issue here: https://github.com/withastro/astro/issues
It depends on your OS and environment.
For instance, withastro/astro issue 2144 reports the exact same error message, but on Windows, using Linux on WSL2 (Ubuntu 20.04.3 LTS).
Double-check your %PATH%/$PATH in your execution environment.
Update Oct. 2022, ten month later: withastro/astro issue 2144 is reported closed with the workaround by Matej Bunček:
As I was researching this seems to be a general issue with NPM for those who uses SSH.
There's an open issue here: npm/cli#2610 which is still far from being resolved and it's a huge thread.
Some folks might be interested in these workarounds to get it working.
git config --global url."https://github.com/".insteadOf git#github.com:
git config --global url."https://".insteadOf git://
Also I've tried yarn, npm and pnpm, all of them seems to have same problem so I believe it's core problem of node.
Also both npm 6 and 7 are not working.
Not a direct solution to your error message, but a general solution for those kinds of errors:
I would recommend doing the development inside docker containers, so called devcontainers.
Since you will develop in separate and isolated environments containing only the project's minimum dependencies and tools, it is a lot less likely to face OS specific issues in general.
Here are some resources to get started:
https://code.visualstudio.com/docs/remote/containers
https://microsoft.github.io/code-with-engineering-playbook/developer-experience/devcontainers/
https://github.com/microsoft/vscode-dev-containers
I notice that the mosaic package was updated a few days ago (1.8.3). Since then, I keep getting an error message that mosaic can't load.
> library(mosaic)
Error: package or namespace load failed for ‘mosaic’:
object ‘compare’ is not exported by 'namespace:mosaicCore'
The package installed, and it works on a PC. I've tried reinstalling R and R studio to be sure but I keep getting the same error. Anyone who has had the same problem or figured out how to fix it?
It works fine on a Mac (it was developed on a Mac).
I'm not sure how you did your installation, but you also need to have an updated version of mosaicCore. Looks like that didn't happen for some reason.
I'd suggest updating mosaicData and ggformula as well, if your update method didn't trigger those already. All four packages went to CRAN last week. If it has been awhile, you might do update.packages().
My daughter met the same problem today.
As per the suggestion here, we install the newest mosaicData, and the problem remains.
Then quit Rstudio, restart Rstudio, after running library(mosaic) again, it mentions that several packages are missing,
After installing the missing packages, everything is ok.
I had other people in my class that had the same issue. Similar to the above answer, i had to:
Uninstall/delete the package ggformula
Update the package mosaicCore
Reinstall ggformula
Reinstall mosaic
That is how i was able to resolve the issue.
I'm having problems with using fluent in Silverstripe 4. So I tested to install different versions of fluent to see if I was able to get it working. The version of Silverstripe is 4.1.1.
After uninstalling fluent again, I get "server error" and I can't see anything in the php logs and when trying to run in dev mode, I don't see any difference.
One puzzling thing is that a folder named "themes" appeared in the root folder. I think that it was added by composer during the module installation, but I'm not sure. But I do know that git listed the themes folder as an untracked file. Which suggests that it was automatically added. So I removed that folder when uninstalling the module.
Now I'm not sure what to do. I would want to restore the database as it was before installing fluent (I've tried to add language to see if fluent was working). Or at least get back to square one.
How do people usually do when working with Silverstripe and testing modules?
What I've done so far:
Checked the php logs. No errors found.
Added "Director::set_environment_type("dev");" to _config.php, without seeing any difference when loading the page.
Tested to load the page with ?dev=1 without any difference.
I ran composer update and now the site is working. Might be one thing to test for silverstripe noobs (like me).
This issue has been reported on GitHub here -
https://github.com/TorbenK/TK.CustomMap/issues/325
Has anyone else has struggled with this? I was stoked to find this nuget package because it does exactly what I'm looking for but it needs Places and some other GooglePlayServices installed and I can't install them because of this conflict.
I'm also not sure if uninstalling TK.CustomMap and then installing the Play Services would even help because the person who reported the issue on GitHub said-
I converted my app to .net 2.0 and had to use the newest Google play services
60.1142.1 for AdMob to work. It wouldn't install until I uninstalled TK.CustomMap, and now TK.CustomMap won't reinstall because it only want to use GooglePlayServices 42.1021.1
Severity Code Description Project File Line Suppression State
Error NU1107 Version conflict detected for Xamarin.GooglePlayServices.Tasks. Reference the package directly from the project to resolve this issue.
HunterTracker.Android -> Xamarin.GooglePlayServices.Base 60.1142.1 -> Xamarin.GooglePlayServices.Tasks (= 60.1142.1)
HunterTracker.Android -> HunterTracker -> TK.CustomMap 2.0.1 -> Xamarin.GooglePlayServices.Location 42.1021.1 -> Xamarin.GooglePlayServices.Tasks (= 42.1021.1).
That's pretty much the exact error I'm getting trying to install the other packages. There's no resolution on github.
Anybody found a work around? Or does anyone know how to "Reference the package directly from the project"?
Thanks to SushiHangover's comments above pointing me in the right direction I was able to discover what I needed to do here. I had an error updating the nuget packages of TK.CustomMap at first because v26 Xamarin.Android.Support.Vector.Drawable was targeting MonoAndroid8.0 and the update to v27 must target MonoAndroid8.1 So it took quite a bit just to be able to update the nuget packages in order to get the assemblies with later versions so I could use TK.CustomMap in my solution. But I was eventually able to get there. Here were the steps I followed (as best I can remember). I am unable to compile ios right now because I don't have a MAC so that fix will have to come later. This fix is for the shared project and Android project only
Download the TK.CustomMap-master from github
Extract it and delete the Sample project completely (I also deleted the UWP project as I'm not really interested in that at this time)
Opened and built then closed. Deleted packages folder, vs folder, bin and obj from Android and Shared Project (this step is probably not necessary but I did it so...)
In the packages.config in Android changed all targets from monoandroid80 to monoandroid81 save file
In the TK.CustomMap.Android.csproj for every v26.0.1 of any Xamarin.Android.Support or other Xamarin.Android util package changed 26.0.1\lib\MonoAndroid80 to 27.0.2.1\lib\MonoAndroid81 - save file
In the nuget folder in TK.CustomMap.nuspec changed the target framework in this section
<group targetFramework="lib\MonoAndroid7.0">
<dependency id="Xamarin.GooglePlayServices.Location" version="42.1021.1" />
<dependency id="Xamarin.GooglePlayServices.Places" version="42.1021.1" />
<dependency id="Xamarin.Android.Maps.Utils" version="0.5.0" />
<dependency id="Xamarin.Forms" version="2.5.0.91635" />
<dependency id="Newtonsoft.Json" version="10.0.3" />
</group>
to
<group targetFramework="lib\MonoAndroid">
so it could target any version
Opened and updated all nuget packages using package manager (not console). Built debug and release builds
At this point opened solution I had tried to implement TK.CustomMap in previously to attempt the fix. Remember the original issues was that the latest frameworks could not be used and 42.1021.1 frameworks were unable to locate com.google.gms.location and com.google.gms.places.ui files so they had to be updated or no TK.CustomMap
In the problem solution uninstalled TK.CustomMap from all projects
In the problem solution Android project added reference to all the dlls in the release folder of the Android bin file from TK.CustomMap project.
Installed updates for all Xamarin.Android frameworks in problem solution through Package Manager (not console)
Installed updates of all other nuget packages for all projects using Package Manager (not console)
Installed TK.CustomMap to Shared project using Package Manager (not console)
Added the References to the android project a second time. May or may not have helped.
Installed TK.CustomMap Nuget Package using Package Manager (not console)
Built and ran on Live Player successfully!!
Thanks to Sushi Hangover for the advice. I haven't seen any comprehensive tutorials anywhere on how to accomplish this so I figured I would post my own answer in case anyone else was looking. Definitely if you are new to VS all this stuff is no walk in the park in the beginning.
Thanks to #Travis Fleenor. This is my solution. I change a bit your sequence in order to work on mine.
1. Make sure the original proyect from github (https://github.com/TorbenK/TK.CustomMap) works and you can run it.
2. Update the nugets where you get the conflict. In my case I got conflicted in googleplay library version. I updated it in the original proyect and then assure it could run it.
3. Compile entire solution in release mode. Then, copied the generated dll from bin/release and pasted them in a folder in my desktop.
4. I referenced those dll to shared proyect and android proyect. I only used nuget package manager to install some missing packages needed for the tk.custom. Notice that you only will reference some dll that the proyect accept. For the mayority Visual will prompt ' dll already referenced' something.
5. first reference your shared proyect, later your android one. That's all. make sure the you ca recompile solution.
Hope this helps
So I thought I would install Lazarus/Free pascal -latest version from the sourceforge website.
Downloaded the win32 version and install on my XP machine couple of nights ago.
Problem is, it can't seem to find any of its own files.
From the first and every subsequent run it comes up with an error which says it can't find its system.ppu file relating to win32.
I just ignore that error and it seems to still run.
I tried to make a simple calculator application and it couldn't even seem to find the system files or files in the project directory. After battling these problems and setting every single path I could find in all the setups to every directory I could find it eventually compiled and run the program - once, not been able to make it do it again.
I also tried to make a user component library following the instructions on the web and that won't work either because, you guessed it, it can't the files. This time it gives an error saying it can't find a Ttreeview component, despite not even using that component in the library.
Being able to follow search paths is pretty fundamental stuff that they don't seem to have mastered.
Anybody managed to get a working system going, or any tips to sort these problems out?
Did you install in the default directory c:\lazarus? I thought there was an issue with installing to another directory, especially if the path contains spaces.
Nine times out of ten, its the old config of an earlier Lazarus attempt, that still lingers somewhere in the "local app" part of the profile.
If nothing else helps uninstall Lazarus, download Lazarus CodeTyphon edition, and run install as admin.