We have several Flash objects included in our project. We call each one a specific type of widget... For readability/debugging purposes I'd like to rename Main.mxml to something else.
At first this seemed easy, as it would be just a setting in our maven configuration (we're using flex mojos to build our swf).
However; changing the sourceFile from Main.mxml to MyWidget.mxml doesn't seem to do it.
Any thoughts?
Yes you can change the name, just be sure the HTML wrapper references the correct name.
We are using Flex Mojos and to change the name we just needed to update the sourceFile parameter.
Related
Sorry - I'm a total newbie with InstallShield. I've inherited an InstallShield 2013 project that presents the user with a dialog that let's the user select a SQL Server and based on their selection sets a value in a config file. That's not working, so I opened the project in IS and looked in the Text File Changes under System Configuration and there's nothing there that would do this. So how do I figure out where this is happening (or not happening in my case), and then how do I get it to work? I need to set both data source and initial catalog in a file called server.config.
So how do I determine what the user selected and then save that in this file? It looks like I can set up a Text File Change, but how do I access the values selected by the user? And how can I figure out where the "code" is that is supposed to be doing this?
Thanks,
Ben
I would try to track this from the dialog and controls in question, or by following the value through a verbose log. Since you say it doesn't work today, there will probably be an interruption in the flow I describe below, and since you don't know the full state of the installation project, it may be hard to identify. So search from what you know.
Top down: what gets configured
First, find the dialog that you fill out as a user making the selection. Then figure out the property that the particular control is associated with. Now you've got a thread; pull on it.
Search in the direct editor for references to the property. If the property is named MYCONFIG search for just that: MYCONFIG. You'll probably find some sort of use that looks like [MYCONFIG] instead, which is typically a format string specifying to use the value of MYCONFIG. You may also have to search all the files related to your project, as Custom Action implementations can be code stored outside of your InstallShield project.
The use may be in a ControlEvent, CustomAction, or some other table. If it's in a ControlEvent, it may be used to set another property. Ditto if it's in a CustomAction that sets properties (type 51) which may be easier to understand in the Custom Actions and Sequences view. In that case, also search for the property that gets set.
If you find it in a table like ISSearchReplace* or ISXml*, or IniFile, it's probably part of the Text Files Changes, XML File Changes, or INI File Changes, and that view should make it easier to understand.
Maybe that thread dead-ends somewhere. A property gets set, but never referenced. So try to search from the other end.
Bottom up: what gets written
If there are text file changes, xml file changes, ini file changes, or custom actions that reference the file you need updated, see where they get their information. Try to follow it back. If they're well written, you should be able to identify the property (noting that one called CustomActionData comes from a property matching the name of the custom action it's used in), and then trace that further back using the same ideas as above, but in the other direction.
Where's the problem?
If the threads don't connect, that's probably the problem. It's also possible that a custom action lacks permissions but doesn't reports a failure, or that the file name or path got misconfigured somewhere along the way. Look for small things like that if things look like they should work but don't.
It turns out that I misunderstood the problem and the project was never set up to change that value, so all I had to do was set up a Text File Change and it works perfectly. Thanks #Michael Urman for the thorough response - I really appreciate it!
I have a project containing a big package "global" of classes which is designed for Web, I need to share these classes with a new mobile project, but when i add them with :
Properties -> Flex Build Path -> Source path -> Add Folder
they start appearing with index [source path] before the package name, and since them Flash Builder start trowing error messages :
"A file found in a source-path must have the same package structure '', as the definition's package, 'global'."
How can i fix this issue ?
As we've discussed in the comments, I think it would be a better approach to compile your "global" classes into a library (.swc).
You were concerned about loading unnecessary classes: when you link to a library as 'merged', only the classes you use are actually compiled into the main application (and any classes they depend on), so there's no need to worry about that.
As a last argument I also think this is a more flexible approach. A compiled library is easier to reuse and version, so the code can more easily be distributed to other developers on your team.
Rename one of the packages with right click->refactor. Than is should work.
If not you can also try to have your two codes available at the same project, and then you can select which to run in Flash Builder, by right-clicking to that .as or .mxml file, and selecting set as ... (or something like that)
I guess if you will include 'src' fonder instead of 'src/global' that problem will disappear.
I renamed a folder and updated my namespace declarations, but ReSharper 6 claims that the namespace should be a reflection of how it was before the rename. Where is it storing the file location data?
Check to make sure your assembly name matches your new namespace. If you've changed your folder structure to match your new namespace, you may still see the ReSharper alert until you update the project properties.
As delliottg's comment says, in Visual Studio, go to
Project > [project name] Properties > Application
and change "Assembly name" as well as "Default namespace".
I also had this problem with a folder/namespace and none of the above steps fixed it.
In my case I had to do this in Visual Studio:
Right-click the "problem" folder in the solution explorer to open the properties
Ensure the "Namespace Provider" is set to true
This fixed the ReSharper issue for me and I was able to adjust namespaces as normal.
Root namespace is needed to be changed as following.
I use Resharper 2019.3.2 in VS 2019 vs 16.5.2 and I had similar issues.
When developing, I first work out my namespace hierarchy in a single project, then split the project in seperate class libraries. In the first stage, it is convenient to always let the subdirectory correspond to the namespace.
For example, my prototype MeshTools.dll project currently contains:
Meshtools ........................ 3 cs-files in \MeshTools
MeshTools.HeightField .......... 2 cs-files in \MeshTools\HeightField
MeshTools.VectorTools .......... 3 cs-files in \MeshTools\VectorTools
The above answers all assume one single namespace per project. Renaming directories manually may confuse Resharper and that can be repaired by setting the default assembly in the .csproj file to the proper namespace. Thanks for the tip.
However in my case, I have several namespaces in a single project, with each namespace in a Solution directory corresponding to a real directory. Setting the default assembly "Meshtools" does not affect ReSharper behaviour for HeightField and VectorTools, when things have gone wrong with the renaming.
I googled this issue and came by https://www.jetbrains.com/help/resharper/Refactorings__Adjust_Namespaces.html#
It turns out there is a right-click option on a Solution Directory -> Properties. You will find an option to decide, if the Solution Directory is a NameSpace provider or not. When something has gone wrong, Visual studio will reset the field to False. Set it back to True and Resharper will correctly refactor namespace or file location when needed..
If you're using JetBrains Rider, go to the Solution Explorer and right click on the csproj file, then properties in the context menu. In my case the Assembly Name was already updated but "Root Namespace" wasn't, updating Root Namespace allowed JetBrains to automatically update all namespaces.
I need to call navigator.pushView from an .as file in an AIR mobile project. But since I'm in an .as file and not in the .mxml file, how do I get access to the ViewNavigator?
EDIT: I don't have this set up as a tabbed navigation project; my root is ViewNavigatorApplication. I found this as a suggested solution:
parent.parentApplication.vn.pushView(MyViewClass)
But there are two problems with this. First, it assumes there's a ViewNavigator named vn. I don't see how to name the ViewNavigator, or even where it can be found. Second, I introspected the parents of my .as class and in order to get to parentApplication I would have to do:
this.parent.parent.parent.parentApplication.vn.pushView(MyViewClass);
Note that 'this' is also not the view I want to push. I just want to push a View.mxml class from my .as class.
Thanks for any insights.
You should be able to use
FlexGlobals.topLevelApplication.navigator.pushView(NewView)
I got an entity called Proveedor on my Data Context.
A property called Proveedors is generated for the Data Context to represent a collection of Proveedor.
I rename it to Proveedores which is the correct spelling in Spanish.
But as soon as I do anything on the model (not related to the Proveedor Entity) and rebuild it renames it back to Proveedors again.
I don't want to turn off pluralization just want it to stop renaming my renames :)
Thanks
When you make a change to the data model dbml file, the Linq to SQL classes are generated completely from scratch. Any modifications you make to the class files will be overwritten.
Changing the pluralization rules would have to be done by changing the code generation, but I do not know if this is possible.
You can change the generated name by right-clicking the table in the dbml designer window and selecting properties. There is a field called 'name' with which you should be able to define a custom name.
Also: this is not directly relevant to this particular issue, but if you want to add modifications to the generated classes, they are defined as partial classes. So you could add methods to the classes by creating a separate partial class.
Where are you renaming it? If you change the generated C# code, it will be overwritten just as you've seen.
You need to change it in the dbml file. Open that file. Select the property, and then open the property panel and change it there.