I am sending a simple GET request via the API
http://myhudson/job/jobname/lastBuild/delete
however, hudson seems to require delete confirmation button to be pressed. How can I disable this ?
would (not tested)
http://myhudson/job/jobname/lastBuild/doDelete
works better?
Related
I have CAS 6.2.x running in Kubernetes building the image from this repo. I am passing in the cas.properties file via configmap.I have it wired up against Active Directory and am able to login with the Username/Password. I am now working to enable MFA with the Google Authenticator plugin. I have this working as well if I force the flow globally with the following:
cas.authn.mfa.global-provider-id=mfa-gauth
When I try to use the values described here for Multifactor Authentication: Principal Attribute Trigger it doesn't send me to the MFA flow. These are the settings that I have set:
cas.authn.ldap[0].principalAttributeList=userPrincipalName,cn,givenName,sAMAccountName,memberOf
cas.authn.mfa.global-principal-attribute-name-triggers=memberOf
cas.authn.mfa.global-principal-attribute-value-regex=ForceMfa
When I log in these are the values returned back for memberOf:
memberOf
[CN=Group2,OU=MyOu,DC=subdomain,DC=domain,DC=local, CN=Group1,OU=MyOu,DC=subdomain,DC=domain,DC=local, CN=ForceMfa,OU=MyOu,DC=subdomain,DC=domain,DC=local]
Principal
I used Misagh blog post as a guide.
If I change the trigger and regex to sAMAccountName and my username it then works as expected. Not sure if I need to change the regex format to find the group name or if I just have something else wrong. It just seems like the regex is not finding a match for some reason as the settings seem to be working for me, just not with memberOf.
Thank you
Consider switching this to:
cas.authn.mfa.global-principal-attribute-value-regex=.*ForceMfa.+
Then, attach/review your logs for org.apereo.cas under either DEBUG/TRACE so you can see what's happening.
I need to receive a notification when authentication on the client happens.
I have an item with key:
log[/var/log/auth.log,(sshd.*)?(Accepted)]
Also I have trigger with key:
{test.test.ru:log[/var/log/auth.log,(sshd.*)?(Accepted)].str(Accepted,#1)}=1
I need that there will be only notification without raising a problem. With my config I always should deactivate the problem and I receive a second notification I don't need. How can I make notification without an obligation to close the problem or to receive second notification?
Suppose that this is impossible... What meets my requirements most is to make a specific action for this trigger and do not make a recovery step for it.
In the trigger configuration, you can select "Problem Event Generation Mode" = "Multiple" to have multiple problem / notification.
An Action can have no Recovery Operation and works just fine.
https://www.zabbix.com/documentation/current/manual/config/triggers/trigger
A number of my tests use a DeleteCookies method which does this:
chromeDriver.Manage().Cookies.DeleteAllCookies();
This was great until today, when one of the tests made the app take exception:
The required anti-forgery cookie "__RequestVerificationToken" is not present.
So I decided to delete the specific cookie in question, rather than all of them:
chromeDriver.Manage().Cookies.DeleteCookieNamed("user%40user.com");
The specified cookie was not deleted.
To verify DeleteCookieNamed actually worked at all, I deleted two of the other cookies the app creates and it worked.
When a user logs in, the app sets the name of the cookie to their username (in this case, user#user.com) ...but presumably due to URL encoding, changes # to %40.
The cookies that did delete didn't contain %40.
If it was the case that you can't delete cookies where the name contains %40, then DeleteAllCookies wouldn't have worked. Therefore I suspect my targeted cookie has dependencies, similar to how foreign key constraints work in relational databases, such that I need to delete one or more other cookies in a specific order before I can delete the specified one.
A cursory glance at Google provides me with instructions on how to delete cookies in Chrome, rather than how Chrome deletes cookies. Joy. I've run out of time today, please do you have any insights?
The way I got round this issue when I had it was to create the cookie through selenium, and then I was able to delete it. I did find it easier though not to use the # in the cookie names. Hope that helps.
This seems an appropriate work-around for my particular situation - run the CanLogIn test last, using a Playlist:
https://stackoverflow.com/a/29039261/1875540
Use Chrome DevTools:
https://chromedevtools.github.io/devtools-protocol/tot/Network/#method-deleteCookies
The code will be like this:
ChromeDriver driver;
var parameters = new Dictionary<string, object>
{
["name"] = "user%40user.com";
};
driver.ExecuteChromeCommand("Network.deleteCookies", parameters);
You can do this by Selenium DevTools as well. But since they have some problems with integrations, and you may need to upgrade the library after every google update, using the above code can be more efficient and easier.
I want to speed up my Selenium tests and noticed that a lot of time is being spent on login procedure.
Login on web application is implemented via localStorage session token (probably OAuth 2.0). I know how to set it once a browser starts and login page loads:
localStorage.setItem(key, value)
It works great. But is it possible to make the browser to pick up custom localStorage using Selenium (Java).
Is it profile?
Well this works for me in python
driver.excute_script('javascript:localStorage.(funtion of localStorage)')
so I suppose well you can set up a validation token like I use for test, and of course I get my auth_token from the database first, but it works like this
driver.excuteScript('javascript:localStorage.token="your validation token";');
should work
I have been looking for a way to alter a XHR request made in my browser and then replay it again.
Say I have a complete POST request done in my browser, and the only thing I want to change is a small value and then play it again.
This would be a lot easier and faster to do directly in the browser.
I have googled a bit around, and haven't found a way to do this in Chrome or Firefox.
Is there some way to do it in either one of those browsers, or maybe another one?
Chrome :
In the Network panel of devtools, right-click and select Copy as cURL
Paste / Edit the request, and then send it from a terminal, assuming you have the curl command
See capture :
Alternatively, and in case you need to send the request in the context of a webpage, select "Copy as fetch" and edit-send the content from the javascript console panel.
Firefox :
Firefox allows to edit and resend XHR right from the Network panel. Capture below is from Firefox 36:
Chrome now has Copy as fetch in version 67:
Copy as fetch
Right-click a network request then select Copy > Copy As Fetch to copy the fetch()-equivalent code for that request to your clipboard.
https://developers.google.com/web/updates/2018/04/devtools#fetch
Sample output:
fetch("https://stackoverflow.com/posts/validate-body", {
credentials: "include",
headers: {},
referrer: "https://stackoverflow.com/",
referrerPolicy: "origin",
body:
"body=Chrome+now+has+_Copy+as+fetch_+in+version+67%3A%0A%0A%3E+Copy+as+fetch%0ARight-click+a+network+request+then+select+**Copy+%3E+Copy+As+Fetch**+to+copy+the+%60fetch()%60-equivalent+code+for+that+request+to+your+clipboard.%0A%0A&oldBody=&isQuestion=false",
method: "POST",
mode: "cors"
});
The difference is that Copy as cURL will also include all the request headers (such as Cookie and Accept) and is suitable for replaying the request outside of Chrome. The fetch() code is suitable for replaying inside of the same browser.
Updating/completing zszep answer:
After copying the request as cUrl (bash), simply import it in the Postman App:
My two suggestions:
Chrome's Postman plugin + the Postman Interceptor Plugin. More Info: Postman Capturing Requests Docs
If you're on Windows then Telerik's Fiddler is an option. It has a composer option to replay http requests, and it's free.
Microsoft Chromium-based Edge supports "Edit and Replay" requests in the Network Tab as an experimental feature:
In order to enable the option you have to "Enable Experimental Features".
Control+Shift+I (Windows, Linux) or Command+Option+I (macOS)
and tick the checkbox next to "Enable Network Console".
More details about how to Enable Experimental Tools and the feature can be found here
For Firefox the problem solved itself. It has the "Edit and Resend" feature implemented.
For Chrome Tamper extension seems to do the trick.
Awesome Requestly
Intercept & Modify HTTP Requests
https://chrome.google.com/webstore/detail/requestly-modify-headers/mdnleldcmiljblolnjhpnblkcekpdkpa
https://requestly.io/
5 years have passed and this essential requirement didn't get ignored by the Chrome devs.
While they offer no method to edit the data like in Firefox, they offer a full XHR replay.
This allows to debug ajax calls.
"Replay XHR" will repeat the entire transmission.
There are a few ways to do this, as mentioned above, but in my experience the best way to manipulate an XHR request and resend is to use chrome dev tools to copy the request as cURL request (right click on the request in the network tab) and to simply import into the Postman app (giant import button in the top left).
No need to install 3rd party extensions!
There exists the javascript-snippet, which you can add as browser-bookmark and then activate on any site to track & modify the requests. It looks like:
For further instructions, review the github page.