I closed a public branch inside Tortoise and want to push the change but I get this error:
abort: push creates new remote head 2756e9fac9ea on branch '4.4.72'!
As you can see on screenshot, you had two heads in this branch (see red arrows for local revs 186 + 187). Closing one head of branch you just add one more "closing" changeset 188 (see blue arrow) as descendant of 186, but:
not decreased amount of heads
not closed branch for Mercurial (in milti-headed branch all heads must have closing commit in order to close branch)
If you want really close branch and push it, you have 2 choices:
Close second head and perform push -f - got both heads (== branch 4.4.72) on remote in closed state
Merge heads locally (into one head), close single-head branch and push it in the usual way
Related
So, i made some work on the default branch, then i pushed those changes to my fork and after that i created a pull request from the fork to the parent repo (default branch at fork -> default branch at parent).
After this i created a new branch, made some changes, pushed them and again created a pull request from new branch on fork to new branch on parent.
In this pull request (new branch -> new branch) a see commits that are made in default->default pull request. But i expected to see only commits that i made in the new branch.
So, i want to see commits that i made to default in pull request to default and commits to new branch in the pull request made to this new branch. How do i make it?
I apologize for my awfull english. I tried my best to explain myself.
You can try something like this:
hg log -r 'ancestor(default,pull_request_default)::pull_request_default'
replacing pull_request_default with the last revision of your pull request. It will only show the changesets of the pull request.
I cloned a Mercurial repo and did a bunch of local work, and forgot to make a feature branch for said work.
The normal flow is:
Clone
Create a branch
Switch to that branch
Do your work in that branch
Push that branch
Code review
If code review passes, merge branch w/ default (locally)
Push merged changes to default
Close the feature branch
So I need to create a new branch, port all my unstaged/uncommitted code changes (made to default) over to this branch (so that default is now clean and the new branch contains my changes), and then push my feature branch.
I created the new branch via hg branch new_feature. But after pouring over the Merucrial docs, I can't figure out the next step.
So I ask: How do I move (not just copy) all my unstaged/uncommitted changes from default to my new_feature branch)?
You shouldn't have to do anything in particular.
Your uncommitted working folder changes are fluid, and you can set the branch name before you commit, without losing your changes.
If you're on the command line, simply do this:
hg branch feature-X
hg commit -m "Added feature X"
If you're using TortoiseHg simply click the "Branch: default" button just above the commit message input field and select "Open a new named branch" and give it a name, then click OK, then commit as normal.
Setting the branch name to use during commit does not in fact change your working folder, it doesn't do an update, it doesn't do anything, except record in metadata what the branch name is supposed to be.
Also note that this will only allow you to create a new branch to commit to. If you want to continue on an existing branch you first need to update to the head of that branch and this may cause changes to your working folder. You should not need to do this, however, if you want to create a new branch.
I can't push using mercurial, it states I have to merge. If I do hg merge, will it merge my branch with the main trunk, I really want to avoid that.
I created and modified some files. I did hg add to add them all. I did some commits but it won't let me push them to my branch.
I posted my output of hg commands below:
C:\Users\kacalica\Desktop\Projects\hydroinformatics>hg incoming
comparing with https://stcalica#bitbucket.org/nickrsan/hydroinformatics
searching for changes
no changes found
C:\Users\kacalica\Desktop\Projects\hydroinformatics>hg status
M hydro\forms.py
? graph_test.py
? hydro\mlgraph\__init__.py
? hydro\mlgraph\test.py
? hydro\plugins\__init__.py.orig
? hydro\urls.py.orig
? hydro\views.py.orig
? public\Hydroinformatics\media\test.txt
? public\Hydroinformatics\media\test_EPALM1I.txt
? public\Hydroinformatics\media\test_OIWsXcC.txt
? public\Hydroinformatics\media\test_v5s6RmF.txt
C:\Users\kacalica\Desktop\Projects\hydroinformatics>hg add
adding graph_test.py
adding hydro\mlgraph\__init__.py
adding hydro\mlgraph\test.py
adding hydro\plugins\__init__.py.orig
adding hydro\urls.py.orig
adding hydro\views.py.orig
adding public\Hydroinformatics\media\test.txt
adding public\Hydroinformatics\media\test_EPALM1I.txt
adding public\Hydroinformatics\media\test_OIWsXcC.txt
adding public\Hydroinformatics\media\test_v5s6RmF.txt
C:\Users\kacalica\Desktop\Projects\hydroinformatics>hg push
pushing to https://stcalica#bitbucket.org/nickrsan/hydroinformatics
searching for changes
abort: push creates new remote head b54ae56acf07 on branch 'WITHOUTPLUGINSGRAPHS'!
(merge or see "hg help push" for details about pushing new heads)
C:\Users\kacalica\Desktop\Projects\hydroinformatics>hg commit -m "added files"
abort: last update was interrupted
(use 'hg update' to get a consistent checkout)
C:\Users\kacalica\Desktop\Projects\hydroinformatics>hg update
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
C:\Users\kacalica\Desktop\Projects\hydroinformatics>hg branch
WITHOUTPLUGINSGRAPHS
C:\Users\kacalica\Desktop\Projects\hydroinformatics>hg status
M hydro\forms.py
A graph_test.py
A hydro\mlgraph\__init__.py
A hydro\mlgraph\test.py
A hydro\plugins\__init__.py.orig
A hydro\urls.py.orig
A hydro\views.py.orig
A public\Hydroinformatics\media\test.txt
A public\Hydroinformatics\media\test_EPALM1I.txt
A public\Hydroinformatics\media\test_OIWsXcC.txt
A public\Hydroinformatics\media\test_v5s6RmF.txt
C:\Users\kacalica\Desktop\Projects\hydroinformatics>hg summary
parent: 36:b54ae56acf07 tip
actually added template
branch: WITHOUTPLUGINSGRAPHS
commit: 1 modified, 10 added
update: 10 new changesets, 2 branch heads (merge)
C:\Users\kacalica\Desktop\Projects\hydroinformatics>
OK, first of all, let's sort out our terminology here. In Mercurial, a "head" is a changeset with no child changesets (https://www.mercurial-scm.org/wiki/Head). Let's say you're working in default branch. If you're being told that pushing would create new remote heads, it means there's a different head revision in default on the remote repository (the one you're pushing to). If you pushed, default would have two head revisions!
How does this happen? Well, it might be another developer did a push in the meantime, or you pushed from another repository/computer by mistake. You don't want to push a branch with multiple heads, otherwise you end up with some crazy hydra with loads of heads, none of which has all the code.
First you need to pull from the remote repository. Next, you need to run "hg merge" - if you're using Hg-Workbench or similar, you might not see the other head immediately, so scroll down and find it. If you have conflicts, now's the time to resolve them. Make sure you commit your merge, and then you should be able to push.
If you're on a verison of Mercurial that's not more than a couple year's old do: hg push --new-branch which the hg help push shows lets you push a new branch:
--new-branch allow pushing a new branch
That'll only be necessary the first time you push a new branch -- it's just there to make sure you don't accidentally push something you didn't mean to share.
Is it possible to detect if a commit creates a new bookmark or branch via hooks in .hgrc?
I've tried to see if I can find out using hg log, but it just shows on what branch/bookmark the commit has been created: http://hgbook.red-bean.com/read/customizing-the-output-of-mercurial.html
There don't seem to be hooks for it: http://hgbook.red-bean.com/read/handling-repository-events-with-hooks.html
It would make sense I suppose that there isn't a hook for it, because it is also not possible to make a commit which is 'just' the creation of the branch indicating branches/bookmarks only exists when added to a specific commit.
I figured I could check hg branches and hg bookmarks before and after each commit and determine which are removed and added, but is there a cleaner way for detecting branch/bookmark adds/removes?
The pushkey and prepushkey hooks can detect the addition, deletion, and moves of bookmarks.
In hgrc:
[hooks]
prepushkey=echo %HG_NAMESPACE% %HG_KEY% %HG_OLD% %HG_NEW%\n >> out.txt
HG_NAMESPACE will contain "bookmark" and HG_KEY will contain the name of the bookmark.
HG_OLD will contain the hash of the commit the bookmark was before the operation. It won't be set if the bookmark is being created.
HG_NEW will contain the hash of the commit the bookmark will be after the operation. It won't be set if the bookmark is being deleted.
Bookmarks
Bookmarks-handling does not require commit
Bookmark can be created|modified for any changeset in history, not only for current
Bookmark(s) can appear as result of data-exchange (pull|push), not local user's actions
Only part of all possible cases can be covered by hook
Branches
Changing branch always reflected in commit
Branch in changeset may differ from parent's branch not only as result of hg branch (see "merge branches" and "mergesets") - and I haven't nice and easy and ready to use solution for this case
Common notes
You can use standard precommit hook (executed before commit and can enable|disable commit) for testing different conditions in commit or or pretxncommit
Mercurial template-engine has keywords for branch and bookmark for using in hg log -T
In pretxncommit hook commit already exist, but not finalized - it means you can manipulate with commit's data using -r tip and tip's parent in any Mercurial command
Dirty skeleton for hook's body
hg log -T "{KEYWORD}\n" -r "tip + tip^" | ....
where KEYWORD may be branch or bookmarks. Result of log is two-strings output, which can be identical of different (not sure for bookmark, TBT!!), which you have to compare (as you want and can)
PS: Idea inspired by EnsureCommitPolicy Wiki and Mercurial pre commit hook topic here
Before, when I was using perforce, I could work on multiple bugs at once as long as the code did not affect the same files, by having multiple change sets open at once.
Changeset 1:
A.txt
B.txt
C.txt
Changeset 2:
D.txt
E.txt
F.txt
I could submit changeset 2 to the repository without submitting changeset 1 (because it's still in progress)
Is this possible with Mercurial? other than doing each file as a separate commit?
You can always just do: hg commit D.txt E.txt F.txt to commit just those files which will leave A.txt, B.txt, and C.txt uncommited. Using the -I option to commit lets you do those with patterns if they're, for example, in a common directory: hg commit -I 'dir1/**'
You can have two separate branches (working copies) and make one change in and the other in the other. That's one way.
Another is to use Mercurial Queues. You can use qpush --move to change the order of changesets if they have no dependencies on one another, so you can then use qfinish to 'commit' the first changeset that's ready.
You don't actually hold changesets "open" in Mercurial.
Either you've committed your changes, or you haven't.
You can, however, have multiple files with uncommitted changes, and only commit a few of them. It is even possible to commit parts of files, chunks, instead of the whole file.
If I was to do what you're asking I would simply make another clone locally from my first one, and work on the two different fixes in two different working folders. Then I have all the freedom I need to combine the two (push/pull locally), push to the server, etc.
In Mercurial, cloning is a cheap operation when done locally. Just clone the repository for each thing you are working on. Push back to the main repository as each thing is ready:
hg clone http://project project
hg clone project project-bugfix // uses hardlinks and is inexpensive.
hg clone project project-feature
<edit bugfix and feature as needed>
But remember that the default push location is the project cloned from, so you'll either need to edit .hg\hgrc's default push path for the "project" clones, or make sure to hg push http://project from "project-bugfix" and "project-feature" when complete.
Even if your modifications touches the same file you can select what to include (hunk by hunk). You just have to activate the record extension (it's installed by not activated by default).
To activate the record extension, put this in the [extensions] section of your .hgrc:
[extensions]
hgext.record=
Then to commit, replace hg commit by hg record. Let's assume your example change sets with a G.txt file that have changes for both change sets. Commit with:
hg record D.txt E.txt F.txt G.txt
Answer questions, for example:
2 hunks, 6 lines changed
examine changes to 'D.txt'? [Ynsfdaq?] f # f for full file (help with ?)
... skipped file E and F
6 hunks, 35 lines changed
examine changes to 'G.txt'? [Ynsfdaq?] y
## ... (patch hunk here)
record change 6/16 to 'G.txt'? [Ynsfdaq?] y # y to include the hunk, n to skip