I am developing a small project using freeradius 3.0.20 on linux ubuntu 20.04 machine..
installed freeradius, configured mysql on default.conf... loaded virtual servers.. and my device can connect ok..
On init i can see NAS information being loaded from MYSQL table, info is stored everything ok..
client data stored in radcheck, radgroupgcheck,radgroupreply,radipool storing the cgnat ip table etc..
client device logs in with username and password all ok i can navigate on the internet with client logged in, but its not storing clients data on the accounting radacct table on the mysql... no history logs stored at all .. only thing i can see is radpostauth storing username, password xored md5 and authdate which contains the login date only.. attached below full log init from freeradius -x
if anyone can comment, or knows how to fix this configuration issue..
root#PSI-DEV:~# sudo freeradius -X
FreeRADIUS Version 3.0.20
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/sql
including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/sqlippool
including configuration file /etc/freeradius/3.0/mods-config/sql/ippool/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
Debugger not attached
systemd watchdog is disabled
# Creating Auth-Type = mschap
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_exec
# Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_sql
# Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = 3306
login = "radius"
password = <<< secret >>>
radius_db = "radius"
read_groups = yes
read_profiles = yes
read_clients = yes
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
logfile = "/var/log/freeradius/radacct/sql.log"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
safe_characters = "#abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
auto_escape = no
accounting {
reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
}
start {
query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime,acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid, delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}')"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime = (#acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(#acctupdatetime_old), acctstoptime = NULL, framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
stop {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
}
}
post-auth {
reference = ".query"
logfile = "/var/log/freeradius/post-auth.sql"
query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
}
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "#"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
# Loaded module rlm_detail
# Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
detail {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
# Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters = "#abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
# Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_sqlippool
recreate radacct table with auto increment. it will fix it.
import the radacct table from freeradius github link.
Such a problem, there is a server (cluster) on which smb is used, the server is entered into the AD domain, sometimes it is necessary to restart the smbd service (reload won't fit), but at the same time there is some copying of the file on the client (windows), then the load is interrupted, and after the klick "Retry" button, the download starts from the very beginning. Is it possible to do something like that so that the load continues to go from the moment where it was interrupted, maybe you need to configure the client like that. client connects as SMBv3 or SMBv2
server on ubuntu 18.04.
smb created at zfs
smb.conf:
[global]
workgroup = TEST247
realm = test247.ru
security = ads
auth methods = winbind
interfaces = 172.16.11.170/24
bind interfaces only = yes
netbios name = SERVER
encrypt passwords = true
map to guest = Bad User
max log size = 300
dns proxy = no
socket options = TCP_NODELAY
domain master = no
local master = no
preferred master = no
os level = 0
domain logons = no
load printers = no
show add printer wizard = no
log level = 0 vfs:2
max log size = 0
syslog = 0
printcap name = /dev/null
disable spoolss = yes
name resolve order = lmhosts wins host bcast
machine password timeout = 604800
name cache timeout = 660
idmap config TEST247 : backend = rid
idmap config TEST247 : base_rid = 0
idmap config TEST247 : range = 100000 - 200000
idmap config * : range = 200001-300000
idmap config * : backend = tdb
idmap cache time = 604800
idmap negative cache time = 60
winbind rpc only = yes
winbind cache time = 120
winbind enum groups = yes
winbind enum users = yes
winbind max domain connections = 10
winbind use default domain = yes
winbind refresh tickets = yes
winbind reconnect delay = 15
winbind request timeout = 25
winbind separator = ^
private dir = /var/lib/samba/private
lock directory = /run/samba
state directory = /var/lib/samba
cache directory = /var/cache/samba
pid directory = /run/samba
log file = /var/log/samba/smb.%m
include = /etc/samba/smb-res.conf
testparm:
testparm -s /etc/samba/smb.conf
Load smb config files from /etc/samba/smb.conf
WARNING: The "auth methods" option is deprecated
WARNING: The "syslog" option is deprecated
Loaded services file OK.
Server role: ROLE_DOMAIN_MEMBER
smb-res.conf:
[test109_smb]
comment = test109_smb share
path = /config/pool/test109/smb
browseable = yes
writable = yes
inherit acls = yes
inherit owner = no
inherit permissions = yes
map acl inherit = yes
nt acl support = yes
create mask = 0777
force create mode = 0777
force directory mode = 0777
store dos attributes = yes
public = no
admin users =
valid users =
write list =
read list =
invalid users =
vfs objects = acl_xattr
full_audit:prefix = %S|%u|%I
full_audit:facility = local5
full_audit:priority = notice
full_audit:success = none
full_audit:failure = none
shadow: snapdir = .zfs/snapshot
shadow: sort = desc
shadow: localtime = yes
shadow: format = shadow_%d.%m.%Y-%H:%M:%S
worm: grace_period = 30
cryptfile: method = grasshopper
Resuming a copy operation doesn't depend on the smb client or server, but on the application which is doing the copying.
The standard Windows copy doesn't know to resume.
Other (third party) apps (maybe Total Commander?) can be more intelligent about it. You could even write your own app to do a smart copy.
My producer isnt throwing any errors but data is not being sent to the destination topic. Can you recommend any techniques to debug this situation.
I have call to a Confluent Python Avro Producer inside a synchronous loop to send data to a topic like so:
self.producer.produce(topic=test2, value=msg_dict)
After this call I have a piece of code like so to flush the queue:
num_messages_in_queue = self.producer.flush(timeout = 2.0)
print(f"flushed {num_messages_in_queue} messages from producer queue in iteration {num_iterations} ")
this executes without any error. But also there is no callback fired after this code executes. My producer is initiated as follows:
def __init__(self,broker_url=None,topic=None,schema_registry_url=None,schema_path=None):
try:
with open(schema_path, 'r') as content_file:
schema = avro.loads(content_file.read())
except Exception as e:
print(f"Error when trying to read avro schema file : {schema_path}")
self.conf = {
'bootstrap.servers': broker_url,
'on_delivery': self.delivery_report,
'schema.registry.url': schema_registry_url,
'acks': -1, #This guarantees that the record will not be lost as long as at least one in-sync replica remains alive.
'enable.idempotence': False, #
"error_cb":self.error_cb
}
self.topic = topic
self.schema_path = schema_path
self.producer = AvroProducer(self.conf,default_key_schema=schema, default_value_schema=schema)
My callback method is as follows:
def delivery_report(self, err, msg):
print(f"began delivery_report")
if err is None:
print(f"delivery_report --> Delivered msg.value = {msg.value()} to topic= {msg.topic()} offset = {msg.offset} without err.")
else:
print(f"conf_worker AvroProducer failed to deliver message {msg.value()} to topic {self.topic}. got error= {err}")
After this code is executed, I look at my topic on the schema registry container like so:
docker exec schema_registry_container kafka-avro-console-consumer --bootstrap-server kafka:29092 --topic test2 --from-beginning
I see this output:
[2020-04-03 15:48:38,064] INFO Registered kafka:type=kafka.Log4jController MBean
(kafka.utils.Log4jControllerRegistration$)
[2020-04-03 15:48:38,742]
INFO ConsumerConfig values:
auto.commit.interval.ms = 5000
auto.offset.reset = earliest
bootstrap.servers = [kafka:29092]
check.crcs = true
client.dns.lookup = default
client.id =
connections.max.idle.ms = 540000
default.api.timeout.ms = 60000
enable.auto.commit = false
exclude.internal.topics = true
fetch.max.bytes = 52428800
fetch.max.wait.ms = 500
fetch.min.bytes = 1
group.id = console-consumer-49056
heartbeat.interval.ms = 3000
interceptor.classes = []
internal.leave.group.on.close = true
isolation.level = read_uncommitted
key.deserializer = class >> org.apache.kafka.common.serialization.ByteArrayDeserializer
max.partition.fetch.bytes = 1048576
max.poll.interval.ms = 300000
max.poll.records = 500
metadata.max.age.ms = 300000
metric.reporters = []
metrics.num.samples = 2
metrics.recording.level = INFO
metrics.sample.window.ms = 30000
partition.assignment.strategy = [class org.apache.kafka.clients.consumer.RangeAssignor]
receive.buffer.bytes = 65536
reconnect.backoff.max.ms = 1000
reconnect.backoff.ms = 50
request.timeout.ms = 30000
retry.backoff.ms = 100
sasl.client.callback.handler.class = null
sasl.jaas.config = null
sasl.kerberos.kinit.cmd = /usr/bin/kinit
sasl.kerberos.min.time.before.relogin = 60000
sasl.kerberos.service.name = null
sasl.kerberos.ticket.renew.jitter = 0.05
sasl.kerberos.ticket.renew.window.factor = 0.8
sasl.login.callback.handler.class = null
sasl.login.class = null
sasl.login.refresh.buffer.seconds = 300
sasl.login.refresh.min.period.seconds = 60
sasl.login.refresh.window.factor = 0.8
sasl.login.refresh.window.jitter = 0.05
sasl.mechanism = GSSAPI
security.protocol = PLAINTEXT
send.buffer.bytes = 131072
session.timeout.ms = 10000
ssl.cipher.suites = null
ssl.enabled.protocols = [TLSv1.2, TLSv1.1, TLSv1]
ssl.endpoint.identification.algorithm = https
ssl.key.password = null
ssl.keymanager.algorithm = SunX509
ssl.keystore.location = null
ssl.keystore.password = null
ssl.keystore.type = JKS
ssl.protocol = TLS
ssl.provider = null
ssl.secure.random.implementation = null
ssl.trustmanager.algorithm = PKIX
ssl.truststore.location = null
ssl.truststore.password = null
ssl.truststore.type = JKS
value.deserializer = class >>org.apache.kafka.common.serialization.ByteArrayDeserializer
(org.apache.kafka.clients.consumer.ConsumerConfig)
[2020-04-03 15:48:38,887] INFO Kafka version : 2.1.0-cp1 (org.apache.kafka.common.utils.AppInfoParser)
[2020-04-03 15:48:38,887] INFO Kafka commitId : bda8715f42a1a3db (org.apache.kafka.common.utils.AppInfoParser)
[2020-04-03 15:48:39,221] INFO Cluster ID: KHKziPBvRKiozobbwvP1Fw (org.apache.kafka.clients.Metadata)
[2020-04-03 15:48:39,224] INFO [Consumer clientId=consumer-1, groupId=console-consumer-49056] Discovered group coordinator kafka:29092 (id: 2147483646 rack: null) (org.apache.kafka.clients.consumer.internals.AbstractCoordinator)
[2020-04-03 15:48:39,231] INFO [Consumer clientId=consumer-1, groupId=console-consumer-49056] Revoking previously assigned partitions []
(org.apache.kafka.clients.consumer.internals.ConsumerCoordinator)
[2020-04-03 15:48:39,231] INFO [Consumer clientId=consumer-1, groupId=console-consumer-49056] (Re-)joining group >(org.apache.kafka.clients.consumer.internals.AbstractCoordinator)
[2020-04-03 15:48:42,264] INFO [Consumer clientId=consumer-1, groupId=console-consumer-49056] Successfully joined group with generation 1
(org.apache.kafka.clients.consumer.internals.AbstractCoordinator)
[2020-04-03 15:48:42,267] INFO [Consumer clientId=consumer-1, groupId=console-consumer-49056] Setting newly assigned partitions [test2-0] >(org.apache.kafka.clients.consumer.internals.ConsumerCoordinator)
[2020-04-03 15:48:42,293] INFO [Consumer clientId=consumer-1, groupId=console-consumer-49056] Resetting offset for partition test2-0 to offset 0. >(org.apache.kafka.clients.consumer.internals.Fetcher)
So the answer is so trivial that its embarassing!
But it does point to the fact that in a multilayered infrastructure, a single value incorrectly set, can result in a silent failure which can be very tedious to track down.
So the issue came from incorrect param setting my in my docker-compose.yml file, where the env variable for broker_url was not set.
The application code needed this variable to reference the kafka broker.
However there was no exception thrown for this missing param and it was silently failing.
I bought and installed PhpStorm. Next I decided configure xdebug. I set up and saw this info
"Waiting for incoming connection with ide key 'PHPSTORM'"
I so much did and nothing didn't help me. Please help me.
[Xdebug]
zend_extension="%sprogdir%/modules/php/%phpdriver%/ext/php_xdebug.dll"
;xdebug.default_enable = 1
xdebug.auto_trace = 0
xdebug.collect_includes = 1
;xdebug.collect_params = 4
;xdebug.collect_return = 1
;xdebug.collect_assignments = 1
;xdebug.collect_vars = 1
xdebug.dump.REQUEST = *
xdebug.dump.SESSION = *
xdebug.dump.SERVER = REMOTE_ADDR,REQUEST_METHOD
;xdebug.dump.COOKIE =
;xdebug.dump.FILES =
;xdebug.dump.GET =
;xdebug.dump.POST =
xdebug.dump_globals = 1
xdebug.dump_once = 1
xdebug.dump_undefined = 1
xdebug.extended_info = 1
;xdebug.file_link_format = ""
xdebug.idekey = "PHPSTORM"
;xdebug.manual_url = "http://www.php.net"
xdebug.max_nesting_level = 256
xdebug.overload_var_dump = 1
;xdebug.profiler_append = 1
xdebug.profiler_enable = 0
xdebug.profiler_enable_trigger = 1
xdebug.profiler_output_dir="%sprogdir%/userdata/temp/xdebug/"
xdebug.profiler_output_name = "cachegrind.out.%H%R"
xdebug.remote_autostart = on
xdebug.remote_enable = on
xdebug.remote_connect_back = on
;xdebug.remote_autostart = 0
;xdebug.remote_enable = 0
xdebug.remote_handler = "dbgp"
xdebug.remote_host = "localhost"
;xdebug.remote_log = "none"
xdebug.remote_mode = "req"
xdebug.remote_port = 9000
;xdebug.scream = 1
;xdebug.show_exception_trace = 0
;xdebug.show_local_vars = 1
;xdebug.show_mem_delta = 1
;xdebug.trace_format = 1
;xdebug.trace_options = 1
xdebug.trace_output_dir = "%sprogdir%/userdata/temp/xdebug/"
;xdebug.trace_output_name = "trace.%H%R"
xdebug.var_display_max_children = 256
;xdebug.var_display_max_data = 1024
xdebug.var_display_max_depth = 16
;xdebug.remote_cookie_expire_time = 3600
Did you enable 'Can accept external connections' in Preferences -> Build, Execution, etc. -> Debugger ?
Also try adding the remote log path
xdebug.remote_log = E:/Server/tmp/xdebug.log
so that you can collect xdebug logs and see what it has to say about it.
See this So thread for additional help
You can try chrome XDEBUG extension with simple xdebug configs. It works fine for me.
here are my configs
zend_extension = E:\wamp64\bin\php\php7.0.0\ext\php_xdebug-2.4.0-7.0-vc14-x86_64.dll
xdebug.remote_enable = 1
xdebug.var_display_max_depth = 16
xdebug.remote_port=9000
xdebug.var_display_max_data = 4096
xdebug.overload_var_dump = 1
xdebug.remote_cookie_expire_time=10800
xdebug.remote_host = "127.0.0.1"
xdebug.scream = 1
I ran into the same problem yesterday. I rummaged all the answers to this question on the Internet Unluckily, nothing works for me. However, I accidentally found a solution this morning.
OS: macOS Catalina 10.15.4
Xdebug: v2.9.6
Phpstorm: 2019.3.4 (don't reinstall your Phpstorm, this won't work.)
Step 1:
[Xdebug]
zend_extension = "/usr/local/Cellar/php#7.3/7.3.13/pecl/20180731/xdebug.so"
xdebug.remote_enable = on
xdebug.remote_host = localhost
xdebug.remote_port = 9000
xdebug.idekey= PHPSTORM
xdebug.remote_autostart = 1
Step 2:
Phpstorm -> Preferences -> Languages & Frameworks -> PHP -> Debug -> Debug port : 9000
Step 3:
Phpstorm -> Preferences -> Languages & Frameworks -> PHP -> Servers -> [delete all of configurations] Like below：
Step 4:
start listening for PHP debug connections. like below:
Step 5:
Start your PHP project by "php artisan serve" on your terminal.
Don't forget to add a breakpoint or turn on "Break at the first line in PHP script"
It works...wow!!!
If you don't want to enable debug mode, just turn off "listening for PHP debug connections"
Hope you have solved this problem now.
I'm trying to get a samba to work with a windows AD. And i can't use my shares through samba.
My smb.conf
#GLOBAL PARAMETERS
[global]
workgroup = MY_DOMAIN
realm = MY_DOMAIN.COM
preferred master = no
server string = Linux Test Machine
security = ADS
encrypt passwords = yes
password server = MY_MASTER_DOMAIN_CONTROLLER
log level = 3
log file = /var/log/samba/%m
max log size = 50
printcap name = cups
printing = cups
winbind enum users = Yes
winbind enum groups = Yes
winbind use default domain = Yes
winbind nested groups = Yes
winbind separator = +
idmap uid = 1100-20000
idmap gid = 1100-20000
;template primary group = "Domain Users"
template shell = /bin/bash
[homes]
comment = Home Direcotries
valid users = %S
read only = No
browseable = No
[tmp]
comment = Directory for storing pictures by jims users
path= /var/tmp
Valid Users = #"MY_DOMAIN+group name" MY_DOMAIN+MY_ACCOUNT
; public=no
writable=yes
browseable=yes
read only = no
guest ok = no
create mask = 0777
directory mask = 0777
wbinfo -u and wbinfo -g work as expected. kinit MY_ACCOUNT#MY_DOMAIN.COM works too.
But i can't connect to samba. I'm using debian 5, samba 3.2.5 and kerberos 5. My /var/www is 777. Any ideas ?
You are missing a backend to connect to AD.
idmap config MY_DOMAIN:default = true
idmap config MY_DOMAIN:schema-mode = rfc2307
idmap config MY_DOMAIN:range = 10000-49999
idmap config MY_DOMAIN:backend = ad
idmap config * : backend = tdb
idmap config * : range = 50000-99999
winbind nss info = rfc2307