Is there a way to convert a string such as "-1 week" or "-5 minutes" into a datetime value in MySQL similar to php's extremely convenient strtotime() function?
I have a table that stores a human-readable time interval (such as "2 minutes") in one column and a datetime in another column.
I would like to select the rows where more than the amount of time specified in interval has elapsed since datetime.
MySQL doesn't have an equivalent of PHP's strtotime() in the sense that there is nothing that will automatically attempt to parse and determine the format of a date string using by assuming multiple formats.
What it does have is STR_TO_DATE(str,format) which requires you specify the format of your date, time or date + time string. It is the equivalent of PHP's date_create_from_format(format, str) function (though the format of the format parameter are different).
Here are some examples given from the MySQL documentation. They show a date being passed along with the format string that lets it know how the date string is to be interpreted:
SELECT STR_TO_DATE('01,5,2013','%d,%m,%Y');
SELECT STR_TO_DATE('May 1, 2013','%M %d,%Y');
Alternatively, you can cast a string to a date, time or datetime type, but they require a specific format (YYYY-MM-DD hh:mm:ss.fraction) for it to work:
SELECT CAST("2019-11-21" AS DATE);
If you deviate too far from that format it will make a few assumptions but could produce an incorrect date.
I'm using the America/New York timezone. In the Fall we "fall back" an hour -- effectively "gaining" one hour at 2am. At the transition point the following happens:
it's 01:59:00 -04:00
then 1 minute later it becomes:
01:00:00 -05:00
So if you simply say "1:30am" it's ambiguous as to whether or not you're referring to the first time 1:30 rolls around or the second. I'm trying to save scheduling data to a MySQL database and can't determine how to save the times properly.
Here's the problem:
"2009-11-01 00:30:00" is stored internally as 2009-11-01 00:30:00 -04:00
"2009-11-01 01:30:00" is stored internally as 2009-11-01 01:30:00 -05:00
This is fine and fairly expected. But how do I save anything to 01:30:00 -04:00? The documentation does not show any support for specifying the offset and, accordingly, when I've tried specifying the offset it's been duly ignored.
The only solutions I've thought of involve setting the server to a timezone that doesn't use daylight savings time and doing the necessary transformations in my scripts (I'm using PHP for this). But that doesn't seem like it should be necessary.
Many thanks for any suggestions.
I've got it figured out for my purposes. I'll summarize what I learned (sorry, these notes are verbose; they're as much for my future referral as anything else).
Contrary to what I said in one of my previous comments, DATETIME and TIMESTAMP fields do behave differently. TIMESTAMP fields (as the docs indicate) take whatever you send them in "YYYY-MM-DD hh:mm:ss" format and convert it from your current timezone to UTC time. The reverse happens transparently whenever you retrieve the data. DATETIME fields do not make this conversion. They take whatever you send them and just store it directly.
Neither the DATETIME nor the TIMESTAMP field types can accurately store data in a timezone that observes DST. If you store "2009-11-01 01:30:00" the fields have no way to distinguish which version of 1:30am you wanted -- the -04:00 or -05:00 version.
Ok, so we must store our data in a non DST timezone (such as UTC). TIMESTAMP fields are unable to handle this data accurately for reasons I'll explain: if your system is set to a DST timezone then what you put into TIMESTAMP may not be what you get back out. Even if you send it data that you've already converted to UTC, it will still assume the data's in your local timezone and do yet another conversion to UTC. This TIMESTAMP-enforced local-to-UTC-back-to-local roundtrip is lossy when your local timezone observes DST (since "2009-11-01 01:30:00" maps to 2 different possible times).
With DATETIME you can store your data in any timezone you want and be confident that you'll get back whatever you send it (you don't get forced into the lossy roundtrip conversions that TIMESTAMP fields foist on you). So the solution is to use a DATETIME field and before saving to the field convert from your system time zone into whatever non-DST zone you want to save it in (I think UTC is probably the best option). This allows you to build the conversion logic into your scripting language so that you can explicitly save the UTC equivalent of "2009-11-01 01:30:00 -04:00" or ""2009-11-01 01:30:00 -05:00".
Another important thing to note is that MySQL's date/time math functions don't work properly around DST boundaries if you store your dates in a DST TZ. So all the more reason to save in UTC.
In a nutshell I now do this:
When retrieving the data from the database:
Explicitly interpret the data from the database as UTC outside of MySQL in order to get an accurate Unix timestamp. I use PHP's strtotime() function or its DateTime class for this. It can not be reliably done inside of MySQL using MySQL's CONVERT_TZ() or UNIX_TIMESTAMP() functions because CONVERT_TZ will only output a 'YYYY-MM-DD hh:mm:ss' value which suffers from ambiguity problems, and UNIX_TIMESTAMP() assumes its input is in the system timezone, not the timezone the data was ACTUALLY stored in (UTC).
When storing the data to the database:
Convert your date to the precise UTC time that you desire outside of MySQL. For example: with PHP's DateTime class you can specify "2009-11-01 1:30:00 EST" distinctly from "2009-11-01 1:30:00 EDT", then convert it to UTC and save the correct UTC time to your DATETIME field.
Phew. Thanks so much for everyone's input and help. Hopefully this saves someone else some headaches down the road.
BTW, I am seeing this on MySQL 5.0.22 and 5.0.27
MySQL's date types are, frankly, broken and cannot store all times correctly unless your system is set to a constant offset timezone, like UTC or GMT-5. (I'm using MySQL 5.0.45)
This is because you can't store any time during the hour before Daylight Saving Time ends. No matter how you input dates, every date function will treat these times as if they are during the hour after the switch.
My system's timezone is America/New_York. Let's try storing 1257051600 (Sun, 01 Nov 2009 06:00:00 +0100).
Here's using the proprietary INTERVAL syntax:
SELECT UNIX_TIMESTAMP('2009-11-01 00:00:00' + INTERVAL 3599 SECOND); # 1257051599
SELECT UNIX_TIMESTAMP('2009-11-01 00:00:00' + INTERVAL 3600 SECOND); # 1257055200
SELECT UNIX_TIMESTAMP('2009-11-01 01:00:00' - INTERVAL 1 SECOND); # 1257051599
SELECT UNIX_TIMESTAMP('2009-11-01 01:00:00' - INTERVAL 0 SECOND); # 1257055200
Even FROM_UNIXTIME() won't return the accurate time.
SELECT UNIX_TIMESTAMP(FROM_UNIXTIME(1257051599)); # 1257051599
SELECT UNIX_TIMESTAMP(FROM_UNIXTIME(1257051600)); # 1257055200
Oddly enough, DATETIME will still store and return (in string form only!) times within the "lost" hour when DST starts (e.g. 2009-03-08 02:59:59). But using these dates in any MySQL function is risky:
SELECT UNIX_TIMESTAMP('2009-03-08 01:59:59'); # 1236495599
SELECT UNIX_TIMESTAMP('2009-03-08 02:00:00'); # 1236495600
# ...
SELECT UNIX_TIMESTAMP('2009-03-08 02:59:59'); # 1236495600
SELECT UNIX_TIMESTAMP('2009-03-08 03:00:00'); # 1236495600
The takeaway: If you need to store and retrieve every time in the year, you have a few undesirable options:
Set system timezone to GMT + some constant offset. E.g. UTC
Store dates as INTs (as Aaron discovered, TIMESTAMP isn't even reliable)
Pretend the DATETIME type has some constant offset timezone. E.g. If you're in America/New_York, convert your date to GMT-5 outside of MySQL, then store as a DATETIME (this turns out to be essential: see Aaron's answer). Then you must take great care using MySQL's date/time functions, because some assume your values are of the system timezone, others (esp. time arithmetic functions) are "timezone agnostic" (they may behave as if the times are UTC).
Aaron and I suspect that auto-generating TIMESTAMP columns are also broken. Both 2009-11-01 01:30 -0400 and 2009-11-01 01:30 -0500 will be stored as the ambiguous 2009-11-01 01:30.
I think micahwittman's link has the best practical solution to these MySQL limitations: Set the session timezone to UTC when you connect:
SET SESSION time_zone = '+0:00'
Then you just send it Unix timestamps and everything should be fine.
But how do I save anything to 01:30:00
-04:00?
You can convert to UTC like:
SELECT CONVERT_TZ('2009-11-29 01:30:00','-04:00','+00:00');
Even better, save the dates as a TIMESTAMP field. That's always stored in UTC, and UTC doesn't know about summer/winter time.
You can convert from UTC to localtime using CONVERT_TZ:
SELECT CONVERT_TZ(UTC_TIMESTAMP(),'+00:00','SYSTEM');
Where '+00:00' is UTC, the from timezone , and 'SYSTEM' is the local timezone of the OS where MySQL runs.
Mysql inherently solves this problem using time_zone_name table from mysql db.
Use CONVERT_TZ while CRUD to update the datetime without worrying about daylight savings time.
SELECT
CONVERT_TZ('2019-04-01 00:00:00','Europe/London','UTC') AS time1,
CONVERT_TZ('2019-03-01 00:00:00','Europe/London','UTC') AS time2;
This thread made me freak since we use TIMESTAMP columns with On UPDATE CURRENT_TIMESTAMP (ie: recordTimestamp timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP) to track changed records and ETL to a datawarehouse.
In case someone wonder, in this case, TIMESTAMP behave correctly and you can differentiate between the two similar dates by converting the TIMESTAMP to unix timestamp:
select TestFact.*, UNIX_TIMESTAMP(recordTimestamp) from TestFact;
id recordTimestamp UNIX_TIMESTAMP(recordTimestamp)
1 2012-11-04 01:00:10.0 1352005210
2 2012-11-04 01:00:10.0 1352008810
I was working on logging counts of visits of pages and displaying the counts in graph (using Flot jQuery plugin). I filled the table with test data and everything looked fine, but I noticed that at the end of the graph the points were one day off according to labels on x-axis. After examination I noticed that the view count for day 2015-10-25 was retrieved twice from the database and passed to Flot, so every day after this date was moved by one day to right.
After looking for a bug in my code for a while I realized that this date is when the DST takes place. Then I came to this SO page...
...but the suggested solutions was an overkill for what I needed or they had other disadvantages. I am not very worried about not being able to distinguish between ambiguous timestamps. I just need to count and display records per days.
First, I retrieve the date range:
SELECT
DATE(MIN(created_timestamp)) AS min_date,
DATE(MAX(created_timestamp)) AS max_date
FROM page_display_log
WHERE item_id = :item_id
Then, in a for loop, starting with min_date, ending with max_date, by step of one day (60*60*24), I'm retrieving the counts:
for( $day = $min_date_timestamp; $day <= $max_date_timestamp; $day += 60 * 60 * 24 ) {
$query = "
SELECT COUNT(*) AS count_per_day
FROM page_display_log
WHERE
item_id = :item_id AND
(
created_timestamp BETWEEN
'" . date( "Y-m-d 00:00:00", $day ) . "' AND
'" . date( "Y-m-d 23:59:59", $day ) . "'
)
";
//execute query and do stuff with the result
}
My final and quick solution to my problem was this:
$min_date_timestamp += 60 * 60 * 2; // To avoid DST problems
for( $day = $min_date_timestamp; $day <= $max_da.....
So I am not staring the loop in the beginning of the day, but two hours later. The day is still the same, and I am still retrieving correct counts, since I explicitly ask the database for records between 00:00:00 and 23:59:59 of the day, regardless of the actual time of the timestamp. And when the time jumps by one hour, I am still in the correct day.
Note: I know this is 5 year old thread, and I know this is not an answer to OPs question, but it might help people like me who encountered this page looking for solution to the problem I described.
I am trying to built a attendance app for my college where in I am fetching data for a web time-table application which has a sql backend and there the lecture start time and end time is in format 1518427800. I am not even sure what format is this.
I am using node.js to fetch from mysql and push it in firebase database, but before i pushing it in firebase. i want to convert the datetime format into something that is understandable.
I am not allowed to alter anything in the web application or its database.
It is a unix time stamp and represents the number of seconds since 1970-01-01.
You can just convert it to a number of milliseconds and pass it to the Date constructor:
var datetime = new Date(1518427800 * 1000);
As mentioned in the above answer, it is a UNIX timestamp
Using moment it is very easy to convert into a readable format
const moment = require('moment')
moment(1553939271155).format("DD/MM/YYYY") // outputs "30/03/2019"
moment(1553939271155).format("DD/MMM/YYYY") // outputs "30/Mar/2019"
moment(1553939037562).format("YYYY/MM/DD") // outputs "2019/03/30"
1518427800 is an epoch timestamp. It is the number of seconds since jan 1 1970.
you can simply convert it into the number of milliseconds
ex. 1518427800*1000
then , pass it to the DATE constructor
ex. var datetime = new Date(1518427800 * 1000);
Hi I'm writing queries for MySQL, and now my database has a column containing the timestamp in this format: 7/14/2015 7:57:49 AM, but I need to use the DATEDIFF function, so how can I convert the timestamp into the format like: 2015-7-14 (or 2015-07-14, I'm not sure which one is correct; just the date)?
This should convert your string to just the date in a date format, then you can use DATEDIFF on the date fields in question:
SELECT STR_TO_DATE(LEFT(t,LOCATE(' ',t) - 1), '%m/%d/%Y') FROM my_table;
The LEFT function will take the substring to the left of the space, which is just your date, then STR_TO_DATE will convert that substring to a date the system can use.
(Not knowing your field and table names, I used t and my_table.)
You don't need to. The way MySQL displays timestamps has nothing to do with the way they're stored internally; as long as it's TYPE TIMESTAMP or some compatible type, the DATEDIFF() function will know what to do with it.
TIMESTAMPs are actually stored as a really huge integer representing (I think) milliseconds from Midnight UTC, January 1st, 1970. The display format is determined by a system global variable, and has nothing to do with the actual value.
Converting from a string to a DATETIME or TIMESTAMP is actually also fairly straightforward using the STR_TO_DATE() function; in your case the format string would be something like
STR_TO_DATE('%c/%e/%Y %l:%i:%s %p', datecol)
although you might have to experiment a bit to make it work reliably.
In postgres database (9.4) i have data saved as JSON object. Including some datetime elements. In order to do time comparision in sql query I have to convert this string to timestamp. I have tried this query:
SELECT to_timestamp('2015-05-22T10:56:04.949Z','YYYY-MM-DD HH:MI:SS.MS');
-- dummy query just to test converting
OUTPUT: 2015-05-22 10:56:04.949+03
It works basically fine, except, I cant figure out how to include timezone parameter there. This string is in UTC time 10:56AM, if I run this query, I'll get 10:56 in +03 timezone (+03 is my local timezone). According to Postgres documentation, TZ should be added to format string to get timezone as well, but it does not work.
How to format this string so that it includes also timezone from initial date-time string ?
As far as I know it's not possible to parse timezone from string.
However if you know your timestamp is always in UTC timezone you can use:
SELECT to_timestamp('2015-05-22T10:56:04.949Z','YYYY-MM-DD HH:MI:SS.MS')::timestamp at time zone '00:00'