I work in google colab, I've got an error with this code...
I have so many rar files, and I need to unpack them, those are in different path and I made a function in to simplify my work. I made variables those are changeable so I can replace the path to something else, unfortunately the result says No file extracted or asking me a password even I have true password it doesn't wanna stop asking
type hereaddress = "/content/temporary/myfile.rar"
foldestny = "/content/hasilekstrak"
ps ="pass2345"
def rara(adrs, fdstn, pswrd):
!unrar x "$adrs" "$dstn" "-p$psward"
rara(address, foldestny, ps)
however if I type the code in singgle line, it will work.
why does this happen?
I hope I can make a function to extract anything when I need, so simple by typing variables
Related
I'm trying to add some lua functionality to my existing conky setup so that repetitive "code" in my conky text can be cleaned up. For example, I have information for each mounted FS, each core, etc. where each row displayed in my panel differs ONLY by one parameter.
My first skeletal, attempt at using lua functions for this seems to run but displays nothing in my panel. I've only found very simple examples to base this on, so I may have made a simple error, but I don't even know how to diagnose it. My code here is modeled after what I HAVE been able to find regarding writing functions, such as this How to implement a basic Lua function in Conky? , but that's about all the depth I've found on the topic except for drawing and cairo examples.
Here's the code added to my conky config, as well as the contents of my functions.lua file
conky.config = {
...
lua_load = '/home/conky-manager/MyConky/functions.lua',
};
conky.text = [[
...
${voffset 5}${lua conky_test 'test'}
...
]]
file - functions.lua
function conky_test(parm1)
return 'result text'
end
What I would expect is to see is "result text" displayed in my panel at the location where that function call appears, but nothing shows.
Is there a log created by conky as it runs, or a way to provide some debug output? Even if I'd made a simple error here, I'd still like to have the ability to diagnose things as my code gets more complex.
Success!
After cobbling info from several articles together, I figured out my basic flaws -
1. Missing a 'conky_main' function,
2. Missing a 'lua_draw_hook_post' to invoke it, and
3. Realizing that if I invoke conky from a terminal, print statements in lua would appear there.
So, for anyone who sees this question and has the same issues, here's the corrected code.
conky.config = {
...
lua_load = '/home/conky-manager/MyConky/functions.lua',
lua_draw_hook_post = "main",
};
conky.text = [[
...
${lua conky_test 'test'}
...
]]
and the proper basics in my functions.lua file
function conky_test(parm1)
return 'result text'
end
function conky_main()
if conky_window == nil then
return
end
end
A few notes:
I still haven't determined if using 'lua_draw_hook_pre' instead of 'lua_draw_hook_post' makes any difference, but it doesn't seem to in this example.
Also, some examples showed actually calling this 'test' function instead of writing a 'main', but the 'main' seemed to have value in checking to see if conky_window existed.
Some examples seemed to state that naming functions with the prefix 'conky_' was required, but then showed examples of calling those functions without the prefix, so I assume the prefix is inferred during the call.
a major note: you should run conky from the directory containing the lua scripts.
First, here the way i'm calling the function :
eval([functionName '(''stringArg'')']); % functionName = 'someStringForTheFunctionName'
Now, I have two functionName functions in my path, one that take the stringArg and another one that takes something else. I'm getting some errors because right now the first one it finds is the function that doesn't take the stringArg. Considering the way i'm calling the functionName function, how is it possible to call the correct function?
Edit:
I tried the function which :
which -all someStringForTheFunctionName
The result :
C:\........\x\someStringForTheFunctionName
C:\........\y\someStringForTheFunctionName % Shadowed
The shadowed function is the one i want to call.
Function names must be unique in MATLAB. If they are not, so there are duplicate names, then MATLAB uses the first one it finds on your search path.
Having said that, there are a few options open to you.
Option 1. Use # directories, putting each version in a separate directory. Essentially you are using the ability of MATLAB to apply a function to specific classes. So, you might set up a pair of directories:
#char
#double
Put your copies of myfun.m in the respective directories. Now when MATLAB sees a double input to myfun, it will direct the call to the double version. When MATLAB gets char input, it goes to the char version.
BE CAREFUL. Do not put these # directories explicitly on your search path. DO put them INSIDE a directory that is on your search path.
A problem with this scheme is if you call the function with a SINGLE precision input, MATLAB will probably have a fit, so you would need separate versions for single, uint8, int8, int32, etc. You cannot just have one version for all numeric types.
Option 2. Have only one version of the function, that tests the first argument to see if it is numeric or char, then branches to perform either task as appropriate. Both pieces of code will most simply be in one file then. The simple scheme will have subfunctions or nested functions to do the work.
Option 3. Name the functions differently. Hey, its not the end of the world.
Option 4: As Shaun points out, one can simply change the current directory. MATLAB always looks first in your current directory, so it will find the function in that directory as needed. One problem is this is time consuming. Any time you touch a directory, things slow down, because there is now disk input needed.
The worst part of changing directories is in how you use MATLAB. It is (IMHO) a poor programming style to force the user to always be in a specific directory based on what code inputs they wish to run. Better is a data driven scheme. If you will be reading in or writing out data, then be in THAT directory. Use the MATLAB search path to categorize all of your functions, as functions tend not to change much. This is a far cleaner way to work than requiring the user to migrate to specific directories based on how they will be calling a given function.
Personally, I'd tend to suggest option 2 as the best. It is clean. It has only ONE main function that you need to work with. If you want to keep the functions district, put them as separate nested or sub functions inside the main function body. Inside of course, they will have distinct names, based on how they are driven.
OK, so a messy answer, but it should do it. My test function was 'echo'
funcstr='echo'; % string representation of function
Fs=which('-all',funcstr);
for v=1:length(Fs)
if (strcmp(Fs{v}(end-1:end),'.m')) % Don''t move built-ins, they will be shadowed anyway
movefile(Fs{v},[Fs{v} '_BK']);
end
end
for v=1:length(Fs)
if (strcmp(Fs{v}(end-1:end),'.m'))
movefile([Fs{v} '_BK'],Fs{v});
end
try
eval([funcstr '(''stringArg'')']);
break;
catch
if (strcmp(Fs{v}(end-1:end),'.m'))
movefile(Fs{v},[Fs{v} '_BK']);
end
end
end
for w=1:v
if (strcmp(Fs{v}(end-1:end),'.m'))
movefile([Fs{v} '_BK'],Fs{v});
end
end
You can also create a function handle for the shadowed function. The problem is that the first function is higher on the matlab path, but you can circumvent that by (temporarily) changing the current directory.
Although it is not nice imo to change that current directory (actually I'd rather never change it while executing code), it will solve the problem quite easily; especially if you use it in the configuration part of your function with a persistent function handle:
function outputpars = myMainExecFunction(inputpars)
% configuration
persistent shadowfun;
if isempty(shadowfun)
funpath1 = 'C:\........\x\fun';
funpath2 = 'C:\........\y\fun'; % Shadowed
curcd = cd;
cd(funpath2);
shadowfun = #fun;
cd(curcd); % and go back to the original cd
end
outputpars{1} = shadowfun(inputpars); % will use the shadowed function
oupputpars{2} = fun(inputparts); % will use the function highest on the matlab path
end
This problem was also discussed here as a possible solution to this problem.
I believe it actually is the only way to overload a builtin function outside the source directory of the overloading function (eg. you want to run your own sum.m in a directory other than where your sum.m is located.)
EDIT: Old answer no longer good
The run command won't work because its a function, not a script.
Instead, your best approach would be honestly just figure out which of the functions need to be run, get the current dir, change it to the one your function is in, run it, and then change back to your start dir.
This approach, while not perfect, seems MUCH easier to code, to read, and less prone to breaking. And it requires no changing of names or creating extra files or function handles.
I'm having a problem with my code and I don't know what's up, I've searched online and the _Gx method was suggested as the best way over ones like loadstring(x)... although I would be happy with either, can't get either one to work. What I want to do is, in ComputerCraft, send a function name and argument to a turtle, which I'm doing by saving both values to a table and sending across the table, and then on the turtle's program, have a big list of functions, and using a command, call them from the string sent and insert the arg as well. My error is "attempt to call nil", which I don't quite understand why it's saying that... Thanks in Advance!
EDIT
I've edited my code down, as asked, to show that even stripping all else away, this still fails. I could even strip it down even more by taking the variable completely out, and putting the string straight into the _G. This still fails even doing it like that. I've decided to keep it in because that's how I am actually going to be using it later. Calling the function normally works fine. I'm using version Luaj-jse 2.0.3
function foo ()
print ("HI!")
end
print (_VERSION)
I don't know what rednet is, but it seems like you passes name of function to another Lua VM, which doesn't know anything about this function (this function is absent in that VM's globals table).
So, passing function definition as string and executing it by receiver with loadstring is the only solution.
This question already has answers here:
How do I retrieve the names of function parameters in matlab?
(6 answers)
Closed 8 years ago.
I'm trying to write a general function in MATLAB that takes a function handle as one argument and a path as a second, with optional filters defining which files in the specified folder should be used. The idea is that the inputted function is then applied to all the matching files. However, I want to make sure that there's no uncontrolled crashing of this function, so I'd like to be able to check if the inputted function even takes files as input arguments.
So to sum up, I'd like to know if there's a way to find out if certain input is compatible with a certain function, with only the function handle to go on. I know MATLAB is very loose in these things but if there is a way, please do share it with me.
EDIT: I'm aware that there might be similar functions already built-in to MATLAB, I'm just looking to increase my knowledge and skill in MATLAB-coding.
I don't think you can check if a function treats an input as a filehandle. I agree on the try/catch approach:
function foo(input_func, path)
% for testing
if nargin==0
input_func = #(s) fprintf('Filename: %s\n', s.name);
path = pwd;
end
% check function handle
assert(isa(input_func, 'function_handle'), 'input_func is not a valid function handle!')
% get folder contents
listing = dir(path);
for i_item = 1:length(listing)
item = listing(i_item);
if ~item.isdir
try
input_func(item)
catch E
warning('Function threw error for %s', item.name)
end
end
end
If you try replacing the 'fprintf' with eg. sin(), you should get a bunch of warnings and no nasty crashes.
Something you might want to look into is try/catch:
http://www.mathworks.com/help/matlab/ref/try.html
This way you could try evaluating your function with your file(s), and if it doesn't like it, catch should capture the errors and perhaps execute a corresponding error message
I have been searching an entire afternoon and have found no solution to call in matlab a function by specifying its path and not adding its directory to the path.
This question is quite similar to Is it possible to call a function that is not in the path in MATLAB?, but in my case, I do not want to call a built-in function, but just a normal function as defined in an m-file.
I think handles might be a solution (because apparently they can refer to functions not on the path), but I again found no way to create a handle without cd-ing to the directory, creating it there and the cd-ing back. Trying to 'explore' what a function handle object is and how to make one with a reference to a specific function not on the path has led me nowhere.
So the solution might come from two angles:
1) You know how to create a handle for an m-file in a specific directory.
2) You know a way to call a function not on the matlab path.
EDIT: I have just discovered the function functions(myhandle) which actually lets you see the filepath to which the handle is referring. But still no way to modify it though...
This is doable, but requires a bit of parsing, and a call to evalin.
I added (many years ago!) a function to the MATLAB Central File Exchange called externalFcn
http://www.mathworks.com/matlabcentral/fileexchange/4361-externalfcn
that manages calls to off-path functions. For instance, I have a function called offpathFcn that simply returns a structure with a success message, and the value of an input. Storing that function off my MATLAB path, I can call it using:
externalfcn('out = C:\MFILES_OffPath\offpathFcn(''this is a test'')');
This returns:
out =
success: 1
input: 'this is a test'
(Note that my implementation is limited, and improvable; you have to include an output with an equal sign for this to work. But it should show you how to achieve what you want.)
(MathWorks application engineer)
The solution as noted in the comment 1 to create a function handle before calling the function is nicely implemented by #Rody Oldenhuis' FEX Contribution:
http://www.mathworks.com/matlabcentral/fileexchange/45941-constructor-for-functionhandles
function [varargout]=funeval(fun,varargin)
% INPUT:
% fun: (char) full path to function file
curdir=cd;
[fundir,funname]=fileparts(fun);
cd(fundir);
[varargout{1:nargout}] =feval(funname,varargin{:})
cd(curdir);
I've modified Thierry Dalon's code to avoid the use of feval, which I always feel uncomfortable with. Note this still doesn't get around cd-ing to the directory in question, but well, it happens behind the scenes, so pretend it doesn't happen :-)
Also note what Ben Voigt pointed out above: calls to helper functions off the path will fail.
function [varargout]=funeval(FunctionHandle, FunctionPath, varargin)
% INPUT:
% FunctionHandle: handle to the function to be called; eg #MyFunction
% FunctionPath: the path to that function
% varargin: the arguments to be passed to Myfunction
curdir=cd;
cd(FunctionPath)
[varargout{1:nargout}] = FunctionHandle(varargin{:});
cd(curdir);
end
and calling it would look like
Output = funeval(#MyFunction, 'c:\SomeDirOffMatlabsPath\', InputArgToMyFunc)
The run command can run a script file from any directory, but it can't call a function (with input and output arguments).
Neither feval nor str2func permit directory information in the function string.
I suggest writing your own wrapper for str2func that:
saves the working directory
changes directory to the script directory
creates a function handle
restores the original working directory
Beware, however, that a handle to a function not in the path is likely to break, because the function will be unable to invoke any helper code stored in other files in its directory.