We are facing an issue when we are importing a bacpac file to azure SQL Datatbase. When we digged into the issue we have found out that the bacpac file which we are receving from past 5 days has the script which has "Execute ssisdb" related things in the model xml file of bacpac. However the older bacpac files does not have the script which has ssisdb in the model xml file. I think this is due to the fact that the bacpac which we started receiving contatins the ssis integration catalogue due to which the ssisdb script was generated. Can some one explain this error?
We have no clue on what this error means. So would be great if some one can assist on this
Error Screenshot
Previous bacpac file which does not have ssisdb in script
New Bacpac which contatins ssisdb in the script
Related
I have an SSIS package to load data from multiple CSV files into an SQL staging table, then aggregate the rows of the staging table and insert those records into a destination table and finally delete the staging table rows.
The Package works fine when run manually.
When run using the windows task scheduler(using a .bat file), the package manages to load data from CSV into staging but doesn't do the aggregation ,insert and delete steps.
There are no errors seen in the Task scheduler post execution.
In the SSIS logs however, the following error was seen: Executing the query "" failed with the following error: "Retrieving the COM class factory for component with CLSID {32E37890-EC10-4F89-8D74-1B8CAA4C95F2} failed due to the following error: 8007007e The specified module could not be found. (Exception from HRESULT: 0x8007007E).". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly .
I am not very savvy with the tool so wasn't able to understand what the error meant or how to resolve this.
I have not found the need to use any parameters in this package as the operations are quite straight forward and did not require any.
The .bat file contains
"C:\Program Files (x86)\Microsoft SQL Server\130\DTS\Binn\DTExec.exe" /f "E:\Third Party Supply Performance\CNMA_DATA_EXTRACTION\CNMA_3RDPARTY_SUPPLY_DATA_EXTRACT\CNMA_3RDPARTY_SUPPLY_DATA_EXTRACT\CNMA_DATA_EXTRACTION.dtsx"
Could someone share some guidance on this issue or what I may be missing in terms of package design?
I am attempting to open a .pprt file with Pentaho report designer but it keeps returning the error of unable to open the file as valid report definition. I also went far to extract the file locally (I use a Linux Ubuntu) then tried to open the different .XML files but is of no use if I can get my specific MySQL queries. I'd appreciate some help on how to attack this error.
Find the screenshot below
I am currently migrating a database from an old SQL Server 2012 to a new system running SQL Server 2019. In addition to the database I am also migrating several SQL Server Agent Jobs.
One of these jobs consists of multiple different steps, one that just runs a PowerShell script and two other steps that are implemented as an SSIS package. When I execute one of the steps that are implemented as SSIS package, I get the following error:
The process could not be created for step 2 of job <long hexadecimal number> (reason: The system cannot find the file specified). The step failed.
How am I supposed to diagnose this error? I have no idea which file cannot be found and why. Is there no way to get any additional information about this error? I already checked all files involved in the SSIS package such as the package file itself, the configuration file and all files that are accessed during the execution of the step but I cannot find the reason for this error.
Could there be a compatibility issue since the packages are executed in a new SQL Server 2019 instead of the older SQL Server 2012? If so, how can I check if this is actually the case?
Thanks a lot in advance!
Having the exact same issue.
Found a workaround, don't like it, but it did get the package run.
Change "Type" from SQL Server Integration Services Package" to "Transact-SQL script (T-SQL)"
Make your SQL Statement something like:
EXEC xp_cmdshell '""C:\Program Files\Microsoft SQL Server\150\DTS\Binn\DTExec.exe" /FILE "\"<Path To Package>\<PackageName>.dtsx\"" /WARNASERROR /X86 /CHECKPOINTING OFF /REPORTING E'
Note that the start of the command '"" is NOT a type-o, neither is the \"" right after the .dtsx package name.
Don't like this answer, but until the correct solution comes along... it is working.
I am using SSIS to export a CSV file to a folder location that needs credentials for access so we can SFTP it to a client.
What permissions do I need to set? I don't see any way to set username and passwords in the Flat File Destination.
Currently I get a error when trying to export the file:
Warning: 0x80070005 at Data Flow Task, Flat File Destination [2]: Access is denied.
Error: 0xC020200E at Data Flow Task, Flat File Destination [2]: Cannot open the datafile "\\SERVER\FOLDER\Dropoff\ELIGIBILITY.CSV".
Error: 0xC004701A at Data Flow Task, SSIS.Pipeline: Flat File Destination failed the pre-execute phase and returned error code 0xC020200E.
I thought I had generated a file in a folder with permissions before but I don't do a lot with SSIS and don't remember what I did.
SSIS simply executes as the user running the package. So if you are running from your dev machine it is your Windows credentials which will need access.
If you are running from a SQL Agent Job then the SQL Agent Service Account user will need permissions (or use a proxy)
Just in case this helps anyone, I was also getting this error and could not figure out why it would execute when running the package directly (in my case through VS) but not from SQL Server Agent. All the permissions seemed correct. I finally tried deleting the existing file (I had it set up to overwrite the data in the existing file in that directory) and re-ran the job and it worked. After that, it has worked fine. So there seems to have been some permission issue (maybe?) or conflict with the file I originally created through VS and the file created through the SQL Server Agent job.
I've created an Excel connection. When I create a data flow with an Excel destination and click 'Name of Excel Sheet' I get an "Unspecified Error". When I look under 'Show Advanced Editor' of the destination I see the following error:
Error at blah [Connection manager "DestinationConnectionExcel"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
Error at Insert blah [Destination - blah [199]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "DestinationConnectionExcel" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
I've read through a tons of other post and nothing seems to help. I've tried setting the 'DelayValidation=True' on all the Jet Engine related task. While this allows me to run the package without any errors, I can't edit or change anything. I also can't create new tasks with Excel.
I've already tried to set 'Run64BitRuntime = false" and that also isn't helping.
Another note, The problem is intermittent. I've been able to work with Excel tasks fine one time after a reboot, then another time its all failing as I described.
Any help would be appreciated. Thanks all
I encountered a similar issue, and the resolution was two-fold for me. First, make sure certain dlls are properly registered on your dev machine:
Paraphrased from SSIS 2005: Using Execute SQL Task to work with Excel Connection Manager
Please check whether the following files exist:
C:\windows\system32\odbcjt32.dll
C:\windows\system32\msjet40.dll
C:\windows\system32\msexcl40.dll
C:\Program Files\Common Files\System\Ole DB\oledb32.dll
C:\Program Files\Common Files\System\ado\msado15.dll
If they are, please manually register them. Run each of the following commands from command prompt:
Regsvr32 "C:\Program Files\Common Files\system\Ole DB\oledb32.dll"
Regsvr32 "C:\Program Files\Common Files\system\ado\msado15.dll"
Regsvr32 "C:\windows\system32\msjet40.dll"
Regsvr32 "C:\windows\system32\msexcl40.dll"
Then, update any folder/file paths referenced in the SSIS package. I kept changing the Excel Connection Manager object to point to the correct file, but the change would never "stick." Another developer directed me to look at the list of Variables in the SSIS package. Right-click anywhere in the package designer and choose "Variables" (based on the 2008 version). In the list of variables, check if there are any paths that are being used. If you find any, verify that they exist on your machine or change them to use your own local paths.
After following these two suggestions, I was able to open the Excel file and choose the target sheet in the Excel Connection Manager window. And, the SSIS package runs successfully in my local environment.
I take it the path to the excel workbook is correct? I also had problems when I had opened and saved the excel workbook I was using as my destination in excel. I think if you create the workbook from within SSIS it might use office web tools. Perhaps you could try to recreate the workbook within SSIS.
I got similar problem,make sure connection manager is connected to MicrosoftExcel-64 bit which is same as SQL SSIS version.
Otherwise add Microsoft.ACE.OLEDB.12.0 provider in your linked server, not in your local machine.
And also check if you have Microsoft excel present in your server again not on your local machine
If local machine and SQL Server installed on the same machine then its fine.