update fare_strategy set sales_date_to = ’07-SEP-22’
where dep_date_to is not null
and market_id in
(select market_id
from fare_strategy_markets
where set_type = ‘STANDARD’
);
In the following query, I'm getting error as SQL command not properly ended.
try to change like this because in your query you used ’ this is not valid so i just change it to ' so it's works fine
update fare_strategy set sales_date_to = '07-SEP-22' where dep_date_to is
not null and market_id in (select market_id from
fare_strategy_markets where set_type = 'STANDARD');
Related
I'm new to MySQL and I'm trying to make the following pseudocode work:
SELECT IF(
EXISTS(SELECT * FROM users WHERE `email`="admin" AND `token`="blablabla"),
(UPDATE * FROM sometable WHERE `var`="notimportant"),
"NOT_AUTHORIZED");
What I'm trying to achieve is running code based on the presence of a row, and if it doesn't exists return a message, or something usable. If it does exists, run another SQL command instead, and return those results.
Is this possible?
Your intent is a bit hard to follow from the invalid syntax. But the gist of your question is that you can use a where clause:
UPDATE sometable
SET . . .
WHERE var = 'notimportant' AND
EXISTS (SELECT 1 FROM users WHERE email = 'admin' AND token = 'blablabla');
You can also represent this as a JOIN. Assuming the subquery returns at most one row:
UPDATE sometable t CROSS JOIN
(SELECT 1
FROM users
WHERE email = 'admin' AND token = 'blablabla'
LIMIT 1
) x
SET . . .
WHERE var = 'notimportant' ;
Hello I have this query that i am trying to execute and i keep getting this error "Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.", Kindly help please.
DECLARE #NUMCOUNT BIT
Select #NUMCOUNT = (SELECT
CASE WHEN
(SELECT COUNT(R5REQUISLINES.RQL_REQ)
WHERE R5REQUISLINES.RQL_STATUS IN ('A')
) IN
(SELECT COUNT(R5REQUISLINES.RQL_REQ)
WHERE R5REQUISLINES.RQL_STATUS IN ( 'A','C') ) THEN 1 else 0 END AS NUMCOUNT1
FROM R5REQUISLINES JOIN
R5REQUISITIONS ON R5REQUISLINES.RQL_REQ = R5REQUISITIONS.REQ_CODE
GROUP BY R5REQUISLINES.RQL_REQ, R5REQUISITIONS.REQ_CODE,R5REQUISLINES.RQL_STATUS
)
IF #NUMCOUNT = '1'
begin
UPDATE R5REQUISITIONS
SET R5REQUISITIONS.REQ_STATUS = 'CP'
end
Ok, it sounds like what you actually want to do is update R5REQUISITIONS when there is no RQL_STATUS = 'C' in R5REQUISLINES, since you said you want to count the records where the RQL_STATUS is A and where it's A or C, and then do the update if the counts are the same.. You can greatly simplify this task with the following query:
UPDATE r5
SET r5.REQ_STATUS = 'CP'
FROM R5REQUISITIONS r5
WHERE NOT EXISTS (SELECT 1 FROM R5REQUISLINES r5q WHERE r5q.RQL_REQ = r5.REQ_CODE AND r5q.RQL_STATUS = 'C')
Your 'SELECT CASE' is returning more than 1 record, so it can't be assigned to #NUMBER. Either fix the sub-query to only return the record your looking for or hack it to return only 1 with a 'LIMIT 1' qualification.
I don't know what your data looks like so I can't tell you why your case subquery returns more records than you think it should.
Try running this and see what it returns, that will probably tell you wall you need to know:
SELECT
CASE WHEN
(SELECT COUNT(R5REQUISLINES.RQL_REQ)
WHERE R5REQUISLINES.RQL_STATUS IN ('A')
) IN
(SELECT COUNT(R5REQUISLINES.RQL_REQ)
WHERE R5REQUISLINES.RQL_STATUS IN ( 'A','C')
)
THEN 1
ELSE 0
END AS NUMCOUNT1
FROM R5REQUISLINES JOIN
R5REQUISITIONS ON R5REQUISLINES.RQL_REQ = R5REQUISITIONS.REQ_CODE
GROUP BY R5REQUISLINES.RQL_REQ, R5REQUISITIONS.REQ_CODE,R5REQUISLINES.RQL_STATUS
If there is more than 1 row returned, that's where your problem is.
Hi I'm trying to write a cursor in powerbuilder 12 to fetch some records . Here this is my query.
I'm trying to fetch some records from the trninvhdr table which are not in the second table.
SELECT
INV_DATE,
INV_NO,
INV_TYPE,
CUR_CODE,
EXCH_RATE,
usd_rate,
CR_TERM,
DUE_DATE,
bl_date,
TOT_AMT
FROM trninvhdr
WHERE
COMP_CODE ='NFL1' AND
CUST_CODE = 'NLML' AND
INV_TYPE ='F' AND
INV_DATE <= '2016-03-25' AND
NOT EXISTS
(SELECT * FROM trninvoiceavailability WHERE trninvoiceavailability.COMP_CODE = trninvhdr.COMP_CODE
AND trninvoiceavailability.INV_TYPE = trninvhdr.INV_TYPE AND trninvoiceavailability.INV_NO = trninvhdr.INV_NO);
Here how I use it in the program.
DECLARE lc_retrieve CURSOR FOR
SELECT
trninvhdr.INV_DATE,
trninvhdr.INV_NO,
trninvhdr.INV_TYPE,
trninvhdr.CUR_CODE,
trninvhdr.EXCH_RATE,
trninvhdr.usd_rate,
trninvhdr.CR_TERM,
trninvhdr.DUE_DATE,
trninvhdr.bl_date,
trninvhdr.TOT_AMT
FROM trninvhdr
WHERE
COMP_CODE = :as_comp_code AND
CUST_CODE = :as_cust_code AND
INV_TYPE ='F' AND
INV_DATE <= :as_inv_date )AND
NOT EXISTS (SELECT * FROM trninvoiceavailability
WHERE trninvoiceavailability.COMP_CODE = trninvhdr.COMP_CODE
AND trninvoiceavailability.INV_TYPE = trninvhdr.INV_TYPE AND
trninvoiceavailability.INV_NO = trninvhdr.INV_NO);
open lc_retrieve ;
The query works fine in the mysql server but in the progra it gives me the following error .
Database c0038 SQLSTATE = 3700 MySQL ODBC 5.2 a Driver mysql id 5.5.25 You have an error in your syntax. check the manual that corresponds to your mysql version for the right syntax to use near NOT EXISTS (SELECT * FROM trninvoiceavailability.... at line 1.
What is the correct Syntax that I should use to work this query.
I can see a bracket in this code... where did it come from and where is it's friend?
INV_DATE <= :as_inv_date )AND
You need to remove ) from your query as per below-
INV_DATE <= :as_inv_date )AND
sholuld be INV_DATE <= :as_inv_date AND
I have the following sql that I run in C:
snprintf(sql, 200, "update rec set name = (select name from pers where id = %d )
where id = %d",rec_id , emp_id );
mysql_query(conn, sql) returns a successful result but it's putting 1 in the "rec" table in the "name" field instead of the name, but when I printf the output and use it in MySQL it's working fine.
update rec set name = (select name from pers where id = 104 ) where id = 43
Is there something wrong with my sprintf? Or something has to be added?
I also tried static sql command like this
snprintf(sql,"update rec set name = (select name from pers where id = 104 ) where id = 43");
and it also put 1 in the rec.name
Is that due to count of record returned by the sub query? Can you verify by putting a condition which returns e.g. 2 records so that the name is set to 2? if this is the reason then (though less performing approach) try splitting the queries and see if it works this time.
I am trying to use the following query in SQL Server
SELECT [AL].[Subscriptions].Id,
[AL].[Subscriptions].name,
[AL].[Subscriptions].description,
[AL].[Subscriptions].price,
[AL].[Subscriptions].iconFileName,
IIf(a.expiryDate > Now(), 'TRUE', 'FALSE') AS isSubsByUser
FROM [AL].[Subscriptions]
LEFT JOIN (SELECT *
FROM [AL].[UserSubscriptions]
WHERE userId = 13259) AS a
ON Subscriptions.Id = a.itemid;
but always get the error
Error in list of function arguments: '>' not recognized.
Unable to parse query text.
How do I resolve it?
Like Martin Smith said you need to use a case statement. Also it looks like you are only using a couple of fields in the derived table therefor I would suggest not using *. I put a example below.
SELECT [AL].[Subscriptions].Id,
[AL].[Subscriptions].name,
[AL].[Subscriptions].description,
[AL].[Subscriptions].price,
[AL].[Subscriptions].iconFileName,
case when a.expiryDate > GetDate() then 'TRUE' else 'FALSE' end AS isSubsByUser
FROM [AL].[Subscriptions]
LEFT JOIN (SELECT expiryDate, itemid
FROM [AL].[UserSubscriptions]
WHERE userId = 13259) AS a
ON Subscriptions.Id = a.itemid;