I am a complete novice at this so please bear with me.
I have written an SSIS package that takes Excel data, does Data conversion and then inserts into an Iseries table using an ODBC Connection.
When I select Table - row by row as the destination mode, the package works fine, but is extremely slow writing to the iSeries. All records are written. So there is no issue with the Excel data, or the Data Conversions.
However, if I change the ODBC Destination Data Access Mode to Table Name - batch mode the package fails with the following 3 errors:
[ODBC Destination FileName [160]] Error: SQLSTATE: HYC00, Message: [IBM][System i Access ODBC Driver]Driver not capable.;
[ODBC Destination FileName [160]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "ODBC Destination FileName.Inputs[ODBC Destination Input]" failed because error code 0xC020F453 occurred, and the error row disposition on "ODBC Destination FileName.Inputs[ODBC Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "ODBC Destination FileName" (160) failed with error code 0xC0209029 while processing input "ODBC Destination Input" (171). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I cannot work out whether it is a configuration issue within my iSeries ODBC driver configuration or a flag or something within the SSIS that I need to change?
As I say, I'm a complete novice so if you need any additional information please ask, and if I need to do any debugging or tracing, please explain to me how to do this.
I am running Windows 11 and the package and Excel file are on my laptop with a VPN connection to the iSeries.
Related
I have a query that executed fine in SSMS but gives error when I run it as a task in ssis package DTS_E _INDUCEDTRANSFORMFAILUREERROR
My query is something like this
Select t1.*
From t1
Inner join t2
On t1.c1 = t2.c1
And t1.date between ? And ?
Inner join t3
on t3.c2 = t2.c2
Where
Date between ? And ?
and c4 like ‘%name%’
I am using execute sql task, data access mode is sql command and passing 4 parameters.
SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "OLE DB
Destination.Inputs[OLE DB Destination Input]" failed because error
code 0xC020907B occurred, and the error row disposition on "OLE DB
Destination.Inputs[OLE DB Destination Input]" specifies failure on
error. An error occurred on the specified object of the specified
component. There may be error messages posted before this with more
information about the failure.
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on
component "OLE DB Destination" (2) failed with error code 0xC0209029
while processing input "OLE DB Destination Input" (15). The identified
component returned an error from the ProcessInput method. The error is
specific to the component, but the error is fatal and will cause the
Data Flow task to stop running. There may be error messages posted
before this with more information about the failure.
The attempt to add a row to the Data Flow task buffer failed with
error code 0xC0047020.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE
DB Source returned error code 0xC02020C4. The component returned a
failure code when the pipeline engine called PrimeOutput(). The
meaning of the failure code is defined by the component, but the error
is fatal and the pipeline stopped executing. There may be error
messages posted before this with more information about the failure.
These are my detailed error messages
Even I thought it’s something to do with truncation but my columns are exactly same as I am just syncing data from one table to exactly the same table in another server. I created exactly the same table in server 2 from server 1
Sorry about that, I thought I posted my comments but looks like I did not. Apparently there were duplicate rows in my select query, I was able to find this in SSDT after locally running the package, went to view and output, there was a detailed error message saying that there are duplicate rows and cannot insert. Thank you all for your help
I tried to import a Microsoft Access file into SQL Server 2012.
Error:
Copying to [dbo].[Placements] (Error)
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid date format".
(SQL Server Import and Export Wizard)
Error 0xc020901c: Data Flow Task 1: There was an error with Destination - Placements.Inputs[Destination Input].Columns[LastTimeDate] on Destination - Placements.Inputs[Destination Input]. The column status returned was: "Conversion failed because the data value overflowed the specified type.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Placements.Inputs[Destination Input]" failed because error code 0xC020907A occurred, and the error row disposition on "Destination - Placements.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Placements" (97) failed with error code 0xC0209029 while processing input "Destination Input" (110). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Placements returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Check the [LastTimeDate] column in the Access table to see if it contains any dates prior to January 1, 1753. If so, then you'll either have to fix those dates (if they are incorrect) our you'll have to tweak the column type mapping during the import to ëdit mapping for that column [LastTimeDate] with Datatype as datetime2 (instead of a datetime column) in the SQL Server table column mapping.
Also another thing i had come across during a DB migration from Access to SQL is if the date Column was having a wrong format example :Instead of date value it was '00:00:00' so i checked through the entire Access DB for that Column containing Date values if the value was just '00:00:00' and replaced it with blank. and then migrated the DB from access to SQL .
Successful migration . It did work. try it out.
Sort your table by the date field from the oldest to newest by date.
I'm trying to migrate data from MS Sql server 2012 to MySql server (5.1) using SSIS packages
Here is my data flow task which retrieves data using query from SQL Server and pumps to Mysql (one of its columns contains blob type)
and properties
Tried with ODBC connection manager and ADO.net(odbc driver) manager for destination.
The following is the error I'm facing, it is failing after inserting some records into MySql which I'm not able figure out the reason/ solution:
Error: 0xC020844B at DFT Finding Attachment, ADO NET Destination 2: An exception has occurred during data insertion, the message returned from the provider is: The connection has been disabled.
Error: 0xC0047022 at DFT Finding Attachment, SSIS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "ADO NET Destination" (2) failed with error code 0xC020844B while processing input "ADO NET Destination Input" (9). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
The issue is with MySql max_allowed_packet, it set to 1MB so it's failing while iserting large blobs, so the answer is icreate it to 64MB
set global max_allowed_packet=64M
I'd suggest to add a Data Conversion task into the Data Flow, between Source and Destination and make sure all the data types are converted properly, before inserting into the MySQL table.
I often experienced that SSIS cannot convert the datatypes by default.
I am trying to implement a Lookup Transformation in SSIS 2014 to load "no match output" into "SQL Server Destination", but I got errors at runtime:
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Test dataflow" (58) failed with error code 0xC02020C7 while processing input "SQL Server Destination Input" (74). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
As source task the "OLE DB Source" is used.
The Lookup Transformation uses the no cache mode.
In "SQL Server Destination"-Task: "Table lock" and "Check constraints" are checked and the timeout is set to 30.
What am I doing wrong? Could please someone help to solve this error?
Per my knowledge you cannot use SQL Server Destination while loading data, coming from Lookup Transformation.
You need to use OLE DB Destination.
I'm creating an SSIS package, which will read through a user's SQL database and populate the tables in an Access database. However, for the largest user databases, I start getting errors around the time the Access file reaches approx. 2 GB.
Has anyone run into this problem? Is this a size limitation for this operation?
More information: I'm getting the error code 0xC020907B, but no additional information that I can see.
Error: 0xC0209029 at ,
[733]: SSIS Error Code
DTS_E_INDUCEDTRANSFORMFAILUREONERROR.
The "input "OLE DB Destination Input"
(746)" failed because error code
0xC020907B occurred, and the error row
disposition on "input "OLE DB
Destination Input" (746)" specifies
failure on error. An error occurred on
the specified object of the specified
component. There may be error
messages posted before this with more
information about the failure.
The maximum size of an Access database is 2 GB.