Problems with a prebuilt code for a skr-pro-v1.2 - json

Question

I did not create this code nor am i affiliated in any way. Bought a skr-pro-v1.2 for my cr10s by accident but I'm trying to make it work. Found this https://github.com/mommel/Skr-pro-CR10s-TCM2209-TFT while searching for anything related to flashing the board.
Followed the instructions from the github and opened the btt.cod-workspace in visual as well as installing the recommended extensions.
The code is as follows
{
"settings": {
"git.ignoreSubmodules": true,
"git.detectSubmodulesLimit": 15,
"update.mode": "none",
"platformio-ide.disablePIOHomeStartup": true,
"platformio-ide.activateOnlyOnPlatformIOProject": false,
"platformio-ide.autoPreloadEnvTasks": true,
"window.zoomLevel": 0.3,
"editor.detectIndentation": true,
"editor.insertSpaces": true,
"editor.tabSize": 2,
"explorer.openEditors.visible": 0,
"explorer.compactFolders": true,
"workbench.editor.enablePreviewFromQuickOpen": false,
"editor.minimap.renderCharacters": false,
"editor.minimap.maxColumn": 200,
"editor.minimap.showSlider": "always",
"workbench.editor.labelFormat": "short",
"workbench.editor.showIcons": false,
"window.title": "BTT Skr Pro v1.2 CR-10 ${dirty}",
"editor.renderWhitespace": "all",
"workbench.settings.enableNaturalLanguageSearch": false,
"editor.smoothScrolling": true,
"editor.cursorBlinking": "phase",
"editor.cursorSmoothCaretAnimation": true,
"files.autoSave": "onFocusChange",
"files.insertFinalNewline": true,
"files.trimTrailingWhitespace": true,
//"git.detectSubmodules": true,
//"task.autoDetect": "off",
"grunt.autoDetect": "off",
"jake.autoDetect": "off",
"gulp.autoDetect": "off",
"npm.autoDetect": "on",
//"platformio-ide.buildTask": null,
"workbench.iconTheme": "material-icon-theme",
"workbench.activityBar.visible": true,
"task.saveBeforeRun": "always",
"task.problemMatchers.neverPrompt": true,
"typescript.tsc.autoDetect": "off",
"files.exclude": {
"**/.git": true,
"**/.DS_Store": true
}
},
"extensions": {
"recommendations": [
"platformio.platformio-ide",
"Tyriar.sort-lines"
],
"unwantedRecommendations": []
},
"folders": [
{
"name": "Generated Firmware",
"path": "dist"
},
{
"name": "Build",
"path": "build"
},
{
"name": "----------------------------------------------",
"uri": "/:2spacer"
},
{
"name": "Board Marlin Firmware",
"path": "Firmware/Board/Marlin/Marlin_2.0.x-bugfix"
},
{
"name": "Display BTT TouchScreen Firmware",
"path": "Firmware/Display/BIGTREETECH/TouchScreenFirmware"
},
{
"name": "WIFI ESP3D Firmware",
"path": "Firmware/Wifi_ESP-1s/ESP3D"
},
{
"name": "WIFI ESP3D WebUI",
"path": "Firmware/Wifi_ESP-1s/ESP3D-WEBUI"
},
{
"name": "----------------------------------------------",
"uri": "/:02"
},
{
"name": "Information - Board BTT SKR PRO v1.2",
"path": "Informations/Board/BIGTREETECH-SKR-PRO-V1.1"
},
{
"name": "Information - Marlin Configurations",
"path": "Firmware/Board/Marlin/Configurations_2.0x-bugfix"
},
{
"name": "Information - Display BTT Hardware",
"path": "Informations/Display/BIGTREETECH-TouchScreenHardware"
},
{
"name": "Information - Driver BTT TMC2209 v1.2",
"path": "Informations/Driver/BIGTREETECH-TMC2209-V1.2"
},
{
"name": "Information - Driver BTT TMC2209 Stepper-Driver Jumper Configuration Manual",
"path": "Informations/Driver/SKR-PRO-V1.2-Stepper-Driver-Jumper-Configuration-Manual"
},
{
"name": "Information - Relay BTT v1.2",
"path": "Informations/Relay/BTT-Relay-V1.2"
},
{
"name": "Display BTT TouchScreen Plugin Suit",
"path": "Software/Display/Addon/Bigtree3DPluginSuit"
}
]
}
It is the only relative code i can find that puts together specifically the cr10s, skr prov1.2, wifi module, and the 2209 drivers... the tft screen is not the same (BTT 3.5 inch 3.0) but i was hoping to find out how to change that later if a conflict happens...
When running with debugging i receive an error "You don't have an extension for debugging 'JSON with Comments" which i also found is normal from other links on this site...
tl;dr found this code to flash the board i bought which fits all my needs minus the tft screen... is there anyway to fix/bypass or rescript? to make it write the files i need for flashing..
New to coding please be gentle sorry if any rules are broken for any of the request/tags i thank everyone for their time.