I'm looking to train a word2vec 2.0 model from scratch, but I am a bit new to the field. Crucially, I would like to train it using a large dataset of non-human speech (i.e. cetacean sounds) in order to capture the underlying structure.
Once the pre-training is performed, is it possible to visualize the embeddings the model creates, in a similar way to how latent features are visualized in image processing when using e.g. CNNs? Or are the representations too abstract to be mapped to a spectrogram?
What I would like to do is to see what features the network is learning as the units of speech.
Thanks in advance for the help!
Related
pretty new to deep learning, but couldn't seem to find/figure out what are backend weights such as
full_yolo_backend.h5
squeezenet_backend.h5
From what I have found and experimented, these backend weights have fundamentally different model architectures such as
yolov2 model has 40+ layers but the backend only 20+ layers (?)
you can build on top of the backend model with your own networks (?)
using backend models tend to yield poorer results (?)
I was hoping to seek some explanation on backend weights vs actual models for learning purposes. Thank you so much!
I'm note sure which implementation you are using but in many applications, you can consider a deep model as a feature extractor whose output is more or less task-agnostic, followed by a number of task-specific heads.
The choice of backend depends on your specific constraints in terms of tradeoff between accuracy and computational complexity. Examples of classical but time-consuming choices for backends are resnet-101, resnet-50 or VGG that can be coupled with FPN (feature pyramid networks) to yield multiscale features. However, if speed is your main concern then you can use smaller backends such as different MobileNet architectures or even the vanilla networks such as the ones used in the original Yolov1/v2 papers (tinyYolo is an extreme case).
Once you have chosen your backend (you can use a pretrained one), you can load its weights (that is what your *h5 files are). On top of that, you will add a small head that will carry the tasks that you need: this can be classification, bbox regression, or like in MaskRCNN forground/background segmentation. For Yolov2, you can just add very few, for example 3 convolutional layers (with non-linearities of course) that will output a tensor of size
BxC1xC2xAxP
#B==batch size
#C1==number vertical of cells
#C2==number of horizontal cells
#C3==number of anchors
#C4==number of parameters (i.e. bbx parameters, class prediction, confidence)
Then, you can just save/load the weights of this head separately. When you are happy with your results though, training jointly (end-to-end) will usually give you a small boost in accuracy.
Finally, to come back to your last questions, I assume that you are getting poor results with the backends because you are only loading backend weights but not the weights of the heads. Another possibility is that you are using a head trained with a backends X but that you are switching the backend to Y. In that case since the head expects different features, it's natural to see a drop in performance.
I'm very new in deep learning, and I'm targeting to use GAN (Generative Adversarial Network) to recognize emotional speech. I've only known images being as inputs to most deep learning algorithms, such as GAN. but I'm curious as to how audio data can be an input into it, besides of using images of the spectrograms as the input. also, i'd appreciate it if you can explain it in laymen terms.
Audio data can be be represented in form of numpy arrays but before moving to that you must understand what audio really is. If you give a thought on what an audio looks like, it is nothing but a wave like format of data, where the amplitude of audio change with respect to time.
Assuming that our audio is represented in time domain, we can extract the values at every half-second(arbitrary). This is called sampling rate.
Converting the data into frequency domain can reduce the amount of computation requires as the sampling rate is less.
Now, let's load the data. We'll use a library called librosa , which can be installed using pip.
data, sampling_rate = librosa.load('audio.wav')
Now, you have both the data and the sampling rate. We can plot the waveform now.
librosa.display.waveplot(data, sr=sampling_rate)
Now, you have the audio data in form of numpy array. You can now study the features of the data and extract the ones you find interesting to train your models.
Further to Ayush’s discussion, for information on the challenges and work arounds of dealing with large amounts of data at different time scales in audio data I suggest this post on WaveNet: https://deepmind.com/blog/article/wavenet-generative-model-raw-audio
After that it sounds like you want to do classification. In that case a GAN on it’s own is not suitable. If you have plenty of data you could use a straight LSTM (or another type of RNN) which is designed to model time series, or you can take set sized chunks of input and use a 1-d CNN (similar to WaveNet). If you have lots of unlabelled data from the same or similar domain and limited training data you could use a GAN to learn to generate new samples, then use the discriminator from the GAN as pre-trained weights for a CNN classifier.
Since you are trying to perform Speech Emotion Recognition (SER) using deep learning, you can go for a recurrent architecture (LSTM or GRU) or a combination of CNN and recurrent network architecture (CRNN) instead of GANs since GANs are complicated and difficult to train.
In a CRNN, the CNN layers will extract features of varying details and complexity, whereas the recurrent layers will take care of the temporal dependencies. You can then finally use a fully connected layer for regression or classification output, depending on whether your output label is discrete (for categorical emotions like angry, sad, neutral etc) or continuous (arousal and valence space).
Regarding the choice of input, you can use either a spectrogram input (2D) or raw speech signal (1D) as input. For spectrogram input, you have to use a 2D CNN whereas for a raw speech signal you can use a 1D CNN. Mel scale spectrograms are usually preferred over linear spectrograms since our ears hear frequencies in log scale and not linearly.
I have used a CRNN architecture to estimate the level of verbal conflict arising from conversational speech. Even though it is not SER, it is a very similar task.
You can find more details in the paper
http://www.eecs.qmul.ac.uk/~andrea/papers/2019_SPL_ConflictNET_Rajan_Brutti_Cavallaro.pdf
Also, check my github code for the same paper
https://github.com/smartcameras/ConflictNET
and a SER paper whose code I reproduced in Python
https://github.com/vandana-rajan/1D-Speech-Emotion-Recognition
And finally as Ayush mentioned, Librosa is one of the best Python libraries for audio processing. You have functions to create spectrograms in Librosa.
I am a beginner, and I am very confused about how we can choose a pre-trained model that will improve my model.
I am trying to create a cat breed classifier using pre-trained weights of a model, lets say VGG16 trained on digits dataset, will that improve the performance of the model? or if I train my model just on the database without using any other weights will be better, or will both be the same as those pre-trained weights will be just a starting point.
Also if I use weights of the VGG16 trained for cat vs dog data as a starting point of my cat breed classification model will that help me in improving the model?
Since you've mentioned that you are a beginner I'll try to be a bit more verbose than normal so please bear with me.
How neural models recognise images
The layers in a pre-trained model store multiple aspects of the images they were trained on like patterns(lines, curves), colours within the image which it uses to decide if an image is of a specific class or not
With each layer the complexity of what it can store increases initially it captures lines or dots or simple curves but with each layer, the representation power increases and it starts capturing features like cat ears, dog face, curves in a number etc.
The image below from Keras blog shows how initial layers learn to represent simple things like dots and lines and as we go deeper they start to learn to represent more complex patterns.
Read more about Conv net Filters at keras's blog here
How does using a pretrained model give better results ?
When we train a model we waste a lot of compute and time initially creating these representations and in order to get to those representations we need quite a lot of data too else we might not be able to capture all relevant features and our model might not be as accurate.
So when we say we want to use a pre-trained model we want to use these representations so if we use a model trained on imagenet which has lots of cat pics we can be sure that the model already has representations to identify important features required to identify a cat and will converge to a better point than if we used random weights.
How to use pre-trained weights
So when we say to use pre-trained weights we mean use the layers which hold the representations to identify cats but discard the last layer (dense and output) and instead add fresh dense and output layers with random weights. So our predictions can make use of the representations already learned.
In real life we freeze our pretrained weights during the initial training as we do not want our random weights at the bottom to ruin the learned representations. we only unfreeze the representations in the end after we have a good classification accuracy to fine-tune them, and that too with a very small learning rate.
Which kind of pre-trained model to use
Always choose those pretrained weights that you know has the most amount of representations which can help you in identifying the class you are interested in.
So will using a mnist digits trained weights give relatively bad results when compared with one trained on image net?
Yes, but given that the initial layers have already learned simple patterns like lines and curves for digits using these weights will still put you at an advantage when compared to starting from scratch in most of the cases.
Sane weight initialization
The pre-trained weights to choose depends upon the type of classes you wish to classify. Since, you wish to classify Cat Breeds, use pre-trained weights from a classifier that is trained on similar task. As mentioned by the above answers the initial layers learn things like edges, horizontal or vertical lines, blobs, etc. As you go deeper, the model starts learning problem specific features. So for generic tasks you can use say imagenet & then fine-tune it for the problem at hand.
However, having a pre-trained model which closely resembles your training data helps immensely. A while ago, I had participated in Scene Classification Challenge where we initialized our model with the ResNet50 weights trained on Places365 dataset. Since, the classes in the above challenge were all present in the Places365 dataset, we used the weights available here and fine-tuned our model. This gave us a great boost in our accuracy & we ended up at top positions on the leaderboard.
You can find some more details about it in this blog
Also, understand that the one of the advantages of transfer learning is saving computations. Using a model with randomly initialized weights is like training a neural net from scratch. If you use VGG16 weights trained on digits dataset, then it might have already learned something, so it will definitely save some training time. If you train a model from scratch then it will eventually learn all the patterns which using a pre-trained digits classifier weights would have learnt.
On the other hand using weights from a Dog-vs-Cat classifier should give you better performance as it already has learned features to detect say paws, ears, nose or whiskers.
Could you provide more information, what do you want to classify exactly? I see you wish to classify images, which type of images (containing what?) and in which classes?
As a general remark : If you use a trained model, it must fit your need, of course. Keep in mind that a model which was trained on a given dataset, learned only the information contained in that dataset and can classify / indentify information analogous to the one in the training dataset.
If you want to classify an image containing an animal with a Y/N (binary) classifier, (cat or not cat) you should use a model trained on different animals, cats among them.
If you want to classify an image of a cat into classes corresponding to cat races, let's say, you should use a model trained only on cats images.
I should say you should use a pipeline, containing steps 1. followed by 2.
it really depends on the size of the dataset you have at hand and how related the task and data that the model was pretrained on to your task and data. Read more about Transfer Learning http://cs231n.github.io/transfer-learning/ or Domain Adaptation if your task is the same.
I am trying to create a cat breed classifier using pre-trained weights of a model, lets say VGG16 trained on digits dataset, will that improve the performance of the model?
There are general characteristics that are still learned from digits like edge detection that could be useful for your target task, so the answer here is maybe. You can here try just training the top layers which is common in computer vision applications.
Also if I use weights of the VGG16 trained for cat vs dog data as a starting point of my cat breed classification model will that help me in improving the model?
Your chances should be better if the task and data are more related and similar
I am trying to perform binary segmentation on a custom dataset (DAGM dataset in my case Link to the dataset
I was just curious to know if pretrained networks on the imagenet dataset like VGG,Resnet will be of any particular use as I am not trying to segment objects like cats,dogs etc but anomalies in the images.
Normally you would want to fine tune a model on your new dataset which was previously trained and tuned on a similar problem. Neural networks extract features from samples and use those features to classify. If you have previously trained your network on biomedical dataset, then it has learned how to extract features from those models. So try to find a model that was trained on similar domain.
Also you can check the below link for more insight about the issue.
https://en.wikipedia.org/wiki/Catastrophic_interference
Recently I am learning about the ideal about the embedding layer in neural networks. The best explanation I found so far is here The explanation there well addressed the core concept of why to use embedding layer and how it works.
It also mentioned that our embedding will map similar words to similar region. And thus the quality of our embedding representation is how close or similar that a group of similar representations from original space is in embedding space. But I really have no ideal of how to do it.
My question is, how to design the weight matrix in order to have a better embedding representation that is customised for specific dataset ?
Any hint would be really helpful to me!
Thank you all!
Suppose you know some concepts of neural networks and Word2Vec, I try to explain things briefly.
1, the weight matrix in the embedding layer is often randomly initialized just like weights in other types of neural networks layers.
2, the weight matrix in the embedding layer transforms the sparse input into a dense vector as explained in the post you mentioned.
3, the weight matrix in the embedding layer can be updated during the training process using your dataset along the backpropagation.
Therefore, after training, the learned weight matrix should give you better representations of your specific data. Just like how word embedding works, more data often yields better representations in the embedding layer. Another factor is the number of dimension(generally speaking, the higher dimension, the more degrees of freedom the model will have to learn the representations of the features).