I want to install the system using IPXE in UEFI mode and embed scripts using ipXE.efi.The following:
[root#localhost src]# cat uefi.ipxe
#!ipxe
dhcp
chain http://192.168.222.1/ipxeboot/menu.ipxe
compile:
make bin-x86_64-efi/ipxe.efi EMBED=uefi.ipxe
The installation error is as follows:
enter image description here
I think you need to provide some more context.
I assume you want to load a ipxe script over http on 192.168.222.1. So you have to run a http server on this ip which provides a ipxe script. This ipxe scripts has to provide instructions where to load the os.
I wrote a tutorial to achive this here:
https://medium.com/#peter.bolch/how-to-netboot-with-ipxe-6a41db514dee
Related
Im trying to learn Hyperledger Composer but seems to be a relatively new technology, i mean there are few tutorials and few solutions to a lot of questions, tutorial does not mention possible error case when following the commands and which means there are is also no solution for those errors.
I have joined the composer channel in their community chat, looks like its running in Discord or something, and asked the same question without a response, i have a better experience here in SO.
This is the problem: I have deployed my business network, installed it, started it, created my network admin card and imported it, then to test if everything is ok i have to command composer network ping --card NAME-OF-MY-ADMIN-CARD
And this error comes:
juan#JuanDeDios:~/proyectos/inovacion/a3-poliza-microservice$ composer network ping --card admin#a3-policy-microservice
Error: transaction returned with failure: AccessException: Participant 'org.hyperledger.composer.system.NetworkAdmin#admin' does not have 'READ' access to resource 'org.hyperledger.composer.system.Network#a3-policy-microservice#0.0.1'
Command failed
I think that it has to do something with the permission.acl file, and gave permission to everyone to everything so there would not be any restrictions to anyone, and tryied again, but failed.
So i thought i had to uninstall my business network and create it again, i deleted my .bna and my network.card files also so everything would be created again, but the same error result.
My other attempt was to update the business network, but didn't work, the same error happened and I'm sure i didn't miss any step from the tutorial. I do also followed the playground tutorial. What i have not done its to create another app with the Yeoman but i will do if i don't find a solution to this problem which would not require me to create another app.
This were my steps:
1-. Created my app with Yeoman
yo hyperledger-composer:businessnetwork
2-. Selected Apache-2.0 for my license
3-. Created a3-policy-microservice as the name of the business network
4-. Created org.microservice.policy (Yeah i switched names but Im totally aware)
5-. Generated my app with a template selecting the NO option
6-. Created my assets, participants and transactions
7-. Changed my permission rules to mine
8-. I generated the .bna file
composer archive create -t dir -n .
9-. Then installed my bna file
composer network install --card PeerAdmin#hlfv1 --archiveFile a3-policy-microservice#0.0.1.bna
10-. Then started my network and created my networkadmin card
composer network start --networkName a3-policy-network --networkVersion 0.0.1 --networkAdmin admin --networkAdminEnrollSecret adminpw --card PeerAdmin#hlfv1 --file networkadmin.card
11-. Imported my card
composer card import --file networkadmin.card
12-. Tried to ping my network
composer network ping --card admin#a3-poliza-microservice
And the error happens
Later i tried to create everything again shutting down my fabric and started it again and creating the network from the first step.
My other attempt was to change the permissions and upgrade my bna network, but it failed too. Im running out of options
Hope this description its not too long to ignore it. Thanks in advance
thanks for the question!
First possibility is that your network name is a3-policy-network but you're pinging a network called a3-poliza-microservice - once you do get the correct ACLs in place (currently, that's the error you're trying to resolve).
The procedure for upgrade would normally be the procedure below:
After your step 12 (where you can't ping the business network due to restrictive ACL conditions, assuming you are using the right network name) you would have:
Make the changes to to include your System ACLs this time eg.
/**
* Sample access control list.
*/
rule SystemACL {
description: "System ACL to permit all access"
participant: "org.hyperledger.composer.system.Participant"
operation: ALL
resource: "org.hyperledger.composer.system.**"
action: ALLOW
}
rule NetworkAdminUser {
description: "Grant business network administrators full access to user resources"
participant: "org.hyperledger.composer.system.NetworkAdmin"
operation: ALL
resource: "**"
action: ALLOW
}
rule NetworkAdminSystem {
description: "Grant business network administrators full access to system resources"
participant: "org.hyperledger.composer.system.NetworkAdmin"
operation: ALL
resource: "org.hyperledger.composer.system.**"
action: ALLOW
}
Update the "version" field in your existing package.json in your Business Network project directory (ie need to change it next increment - eg. update the version property from 0.0.1 to 0.0.2.)
From the same directory, run the following command:
composer archive create --sourceType dir --sourceName . -a a3-policy-network#0.0.2.bna
Now install the new business network code firstly:
composer network install --card PeerAdmin#hlfv1 --archiveFile a3-policy-network#0.0.2.bna
Then perform the requisite upgrade step (single '-' for short form of the parameter):
composer network upgrade -c PeerAdmin#hlfv1 -n a3-policy-network -V 0.0.2
After a few seconds, ping the network again to see ACL changes are now in effect:
composer network ping -c a3-policy-network
Spark v. 0.5
Here's the command I used to start a Locator:
ubuntu#ip-172-31-8-115:/snappydata-0.5-bin/bin$ ./snappy-shell locator start
Starting SnappyData Locator using peer discovery on:
0.0.0.0[10334] Starting DRDA server for SnappyData at address localhost/127.0.0.1[1527]
Logs generated in /snappydata-0.5-bin/bin/snappylocator.log
SnappyData Locator pid: 9352 status: running
It looks like it starts the DRDA server locally, with no outside interface for a client to connect to. So, I cannot reach my SnappyData Locator using this JDBC URL from an outside client host (e.g. my SquirrelSQL editor).
This does not connect:
jdbc:snappydata://MY-AWS-PUBLIC-IP-HERE:1527/
What property do I pass my ./snappy-shell.sh location start command to get the DRDA Server to start on a public IP address instead of "localhost/127.0.0.1"?
Use -client-bind-address and -client-port options. For locator also use the -peer-discovery-address and -peer-discovery-port options to specify bind address for other locators/servers/leads (that are passed to their -locators=<address>:<port>):
snappy-shell locator start -peer-discovery-address=<internal IP for peers> -client-bind-address=<public IP for clients>
See the output of snappy-shell locator --help for commonly used options.
For SnappyData releases, you may find it much easier to use the global configuration for all of the locators, servers, leads. Check configuring the cluster.
This will allow specifying all options for all JVMs of the cluster in conf/locators, conf/leads, conf/servers then starting with snappy-start-all.sh, status with snappy-status-all.sh and stop all with snappy-stop-all.sh
On a related note, we at SnappyData Inc., are developing scripts to enable users quickly launch SnappyData cluster on AWS.
If you want to try it out, below steps would guide you. We would love to hear your feedback on this.
Download its development branch git clone https://github.com/SnappyDataInc/snappydata.git -b SNAP-864 (You don't need to clone the repo for this, but I could not find a way to attach the scripts here.)
Go to ec2 directory cd snappydata/cluster/ec2
Run snappy-ec2. ./snappy-ec2 -k ec2-keypair-name -i /path/to/keypair/private/key/file launch your-cluster-name
See this README for more details.
I have a scenario where I need to change several parameters of a hadoop cluster managed by Ambari to document performance of a particular application. The change in the configs entails a restart of the affected components.
I am using the Ambari REST API for achieving this. I figured out how to do this for all service components of hadoop. I' am not sure whether the API provides a way to restart the MySQL server that Hive uses.
I have the following questions:-
Is it the case that a mere stop and start of mysqld on the appropriate machine is enough to ensure that the required configuration changes are recognized by Ambari and the application?
I chose the 'New MySQL database' option while installing Hive via Ambari. Does this mean that restarts are reflected in Ambari only when it is carried out from the Ambari UI?
Your inputs would be highly appreciated.
Thanks!
Found a solution to the problem. I used the following commands using the Ambari REST API for changing configurations and restarting services from the backend.
Login to the host on which the ambari server is running and use the already provided config.sh script as described below.
Modifying configuration files
#!/bin/bash
CLUSTER_NAME=$1
CONFIG_FILE=$2
PROPERTY_NAME=$3
PROPERTY_VALUE=$4
/var/lib/ambari-server/resources/scripts/configs.sh -port <ambari-server-port> set localhost $1 $2 "$3" "$4"
where CONFIG_FILE can take values like tez-site, mapred-site, hadoop-site, hive-site etc. PROPERTY_NAME and PROPERTY_VALUE should be set to values relevant to the specified CONFIG_FILE.
Restarting host components
curl -uadmin:admin -H 'X-Requested-By: ambari' -X POST -d '
{
"RequestInfo":{
"command":"RESTART",
"context":"Restart MySQL server used by Hive Metastore on node3.cluster.com and HDFS client on node1.cluster.com",
"operation_level":{
"level":"HOST",
"cluster_name":"c1"
}
},
"Requests/resource_filters":[
{
"service_name":"HIVE",
"component_name":"MYSQL_SERVER",
"hosts":"node3.cluster.com"
},
{
"service_name":"HDFS",
"component_name":"HDFS_CLIENT",
"hosts":"node1.cluster.com"
}
]
}' http://localhost:<ambari-server-port>/api/v1/clusters/c1/requests
Reference Links:
Restarting components
modifying configurations
Hope this helps!
I am trying to set up a BrowserQuest server that runs in openshift
I've been following this readme. Everything seems to go fine, I get to the end and run rhc app show bq and get the following output:
bq # http://bq-plantagenet.rhcloud.com/ (uuid: 55e4311189f5cf028d0000fc)
------------------------------------------------------------------------
Domain: plantagenet
Created: 8:18 AM
Gears: 1 (defaults to small)
Git URL: ssh://55e4311189f5cf028d0000fc#bq-plantagenet.rhcloud.com/~/git/bq.git/
SSH: 55e4311189f5cf028d0000fc#bq-plantagenet.rhcloud.com
Deployment: auto (on git push)
nodejs-0.10 (Node.js 0.10)
--------------------------
Gears: Located with smarterclayton-redis-2.6
smarterclayton-redis-2.6 (Redis)
--------------------------------
From: http://cartreflect-claytondev.rhcloud.com/reflect?github=smarterclayton/openshift-redis-cart
Website: https://github.com/smarterclayton/openshift-redis-cart
Gears: Located with nodejs-0.10
But when I try to access http://bq-plantagenet.rhcloud.com:8080/ in a browser, I get:
The connection has timed out
The server at bq-plantagenet.rhcloud.com is taking too long to respond
My questions are what is going wrong and how can I fix it? Many thanks for your consideration in reading through this and any suggestions you might have for resolving it
You need to access http://bq-plantagenet.rhcloud.com, leave off the port 8080, that is the port you listen on internally. You should also try checking your log files (https://developers.openshift.com/en/managing-log-files.html) to see what errors your application is producing.
I am using Prosody for stream management. But I am suffering from some issues.
How can I ensure that stream management is enabled on prosody ? Is there any command to test on terminal ?
I also tried to add mod_smacks.lua modules in modules. but I don't know how to enable it on server.
I am using XMPPFramework as chat client on iOS. There is already a method to check support for stream management or not, but it is returning me always false so far.
Please help me out to enable stream management in prosody.
After you added mod_smacks.lua into your /usr/lib/prosody/modules/ add
"smacks";
to your
modules_enabled = {
...
}
in your /etc/prosody/prosody.cfg.lua if you want the module to be loaded every time prosody starts.
Then restart prosody.
Prosodyctl does not show loaded modules.
You can check if the module is loaded via ad-hoc commands (or telnet if activated). You can even load and unload modules via ad-hoc/telnet.
You get more information about mod_smacks here.