https://github.com/nintyfan/V2BlankBrowser
In file main. See at v1UI_integration branch and init_v1_ui and real_new_tab code. I known, there is big amount of code, so I do not paste it here.
Problem is, when trying to add more than two children to GtkOverlay, one of it always get at index 0 and I cannot reorder it with gtk_overlay_reorder_overlay. I try with different approach by use three overlays (one root and two children) and it worked, but problem was I cannot interact with items, even when setting gtk_overlay_set_overlay_pass_through to children. What i do wrong?
Related
I work with ssrs with a dynamic row data in matrix/tablix. There is possibility when I have more than one page (say it two pages) where the data just fill half of the second page and leave a blank space below (half page blank space on the second page). How is the way to fill this blank space with empty rows? (whether rendering empty rows in the tablix, or inserting background image, or anything. I don't have any solution yet as it is dynamic data with many possibilities of the blank space size on the page)
Unfortunately there aren't any settings in the reporter that support this behavior. There are however several workarounds you could use to get the wanted result.
[1]
You could determine the amount of rows that fit on the first page and on the second page, just in case you have items above the
table on the first page. Before you send the datasource to the
reporter count the total rows and check if it exceeds the first page.
Then calculate the number of rows missing to fill an entire second
page (or third/fourth... if you ever get more data). Finally you add
empty rows/objects at the end of your datasource, which will of cource
cause the pages to be filled to the end.
As was pointed out before, this solution is only possible when working
with fixed row heights. If certain columns can have multi-line cells
then these could be checked as well and taken in account when
calculating the number of rows being displayed on the page. This makes
it slightly more complicated but is still a valid solution if you can
predict which columns might be troublesome.
[2]
A second solution would be to hide the table borders and place the table inside a rectangle that spans the maximum size of the
page. The borders of this rectangle can be used to display the table
outer borders and columns can be displayed by adding lines inside the
rectangle. This will cause the columns to fill the last page of the
report automatically. Unfortunately this isn't a solution to display
horizontal grid lines.
[3]
A third approach is adding an extra table directly below your table
with the same size of columns. Using the same method as from the first
solution you could fill the second table to represent the empty rows.
You'll probably have the same issue as with the first solution when
dealing with multi-line rows though.
I believe solution [1] and [3] will offer the most exact solution, if you're willing to do the math. If you don't want any horizontal lines then I suggest using approach [2].
Using an image to overlay the borders is of course another option but then you'll have the same issues when dealing with the multi-line rows. If you plan on working with fixed row heights, where you leave space for multi-line cells then this is becomes a valid approach but so does solutions [1] and [3].
Update:
If you only need the filled pages for printing you could make sure you add enough empty rows to fill at least the entire last page, these may go to a new page (1 new page, not 2... you can use a simple calculated guess for this) and exclude the last page when printing.
Please see my awesome graphic below which is neither too scale or complete. BUT, I wanted to show the structure I'm going for instead of describing it.
I am creating a space rental system wherein a calendar, structured similarly to the below image, both shows the "taken" spots and also allows a user to click an "open" slot to reserve it themselves. I don't need help with the functionality though, just the layout.
Since this is tabular data at it's finest, with headers and everything, I was able to easily create the desired layout that way. However, tables render from left to right, so in the example below, it renders SPACE 1 9:00am, SPACE 2 9:00am, SPACE 3 9:00am, etc. I need it to actually render SPACE 1 9:00am, SPACE 1 10:00am, etc.
The reason is that in order to make each reservation into a "block" represented by the blue squares below, I need to be able to loop through the columns vertically and not through the rows horizontally.
I also want the columns to be a consistent width and be flexible if more spaces are added or if one/some are removed down the road.
I've been playing with flexbox, which I've barely used before, and I'm having no luck at all. I'm not even sure that's the right direction.
My question would be either 1) is there a way to get a standard table to load the way I want or 2) how can I do this without tables?
Maybe bootstrap's grid system will fit your needs. http://getbootstrap.com/css/
You can create a grid like structure by adding columns, up to 12 in a row, and locking those into rows.
The Problem in Hand:
I want to make a form designer where user can drag and drop fields of different type and design the layout too, some what similar to wufoo form builder but here the layout is limited to single column whereas I want to make something where user can make the layout as they want.
I understand how to do in single column view, but could not understand how to achieve multiple column layout eg: row 1 there could be 3 elements, row 2 one element stretched to full length, row 3 there could be just 2 elements etc.
What I tried:
I have tried with jquery UI sortable to make a single column layout with using div where new elements can be dragged and repositioned.
Any suggestion on how to proceed further will be helpful
I have tried searching StackOverFlow and google but could not find any link on a similar topic. If anyone could point me to the same, it will be also helpful.
When you reorder elements on wufoo form builder, you can only drag'n'drop up or down. Remove that restriction and as soon as one element is dragged across a certain threshold, it "belongs" to the next column. If the "old" column was the first or last one and the line that the element was moved over was to the "outside" of the form, add a new column there, until the maximal number of columns is reached.
If the used drags the last element of a column into another column, remove the now empty column on element-drop.
You could also remove the dynamic adding/removing of columns and juist have a button ("remove column" & "add column") to do it by code.
An example for the dropping in another column can be found here: http://jqueryui.com/sortable/#connect-lists
Hope this helped!
Edit:
http://jqueryui.com/sortable/#portlets and http://jqueryui.com/sortable/#empty-lists also have elements that you could look into. Good luck! Sounds like a nice project. Can we see any progress or beta?
I've got a bit of a challenge with an HTML table that we need to have raised columns. If you look at the attached image you'll see what I mean.
The purpose of these raised columns is to draw the user's attention to them.
The problem is:
To get the effect of the column raising above the other columns you
need some kind of element/height/margin to appear outside the
boundary of the table, which doesn't seem to work
Same goes for the bottom
To have the drop shadow appear correctly, it needs to be applied to all the cells in a column.
We did get this to work by splitting it up into multiple tables then applying the styles to the table that should be the raised column. The image I've attached is actually a live table working like this.
But, you loose all other needed features of tables...
Row heights don't match if the text wraps in table 1 but not in
table 2.
To deal with the row height issue we applied a fixed height to each table's rows, but then you have to force text to not wrap. If you then get text that's longer than the width you run into trouble.
Does anyone know how this can be achieved without splitting the tables?
Thanks,
jacques
Try having an extra row for the table above the header row (you may have to stop using any th tags) to give you the overbar at the top. Similarly for the bottom, an extra highlighting row.
Although you have to compromise the table a little to do that, it is better in my book than separating into 2 tables, as that defeats all the purposes of the table tag; to show a table, and have that table easily declared.
The effects inside the table are probably best done with jquery, unless the choice of highlighted columns is entirely static, in which case consider rendering a static html version by generating the html appropriately.
i have a report page,and inside of it,near the end of the page there is a 6x3 table. when i run the report,first row is shown in the first page,and the other 5 rows are shown in the second page even if the keep together property is set to True. Does not the Keep Together property mean that keep all the rows together . How can i fix that ? thanks in advance.
The keep together property attempts to keep individual rows on the same page, not all the rows.
i.e, if you have a detailed row that is filled with content spanning multiple lines, that will still be kept together in the same page when possible.
One possible solution might be to put a rectangle in that page, and putting the table inside the rectangle. Not 100% sure it will work, but that is what I would try.
Hope it helps.
I was having the same problem. The solution is to right click on the table, Add Group, and put everything you want unbroken up in the same group.