I am trying to remove double quotes from the Value of 'version' but, not able to do that with the following groovy codes. Please help me resolving this.
Source JSON:
{"version":"1",
"code":'',
"eccQuoteExternalQuoteId":'100000136',
"reasonForRejection":'',
"rejectionCode":'',
"state":{"code":'SOX_APP',"integrationKey":'Approve'},
"integrationKey":''}
Groovy Script:
def Message processData(Message message) {
//Body
def body = message.getBody(String.class);
def jsonSlurper = new JsonSlurper()
def list = jsonSlurper.parseText(body)
list.each{
it.version=Integer.parseInt(it.get("version").toString().replace(" ",""));
}
def jsonOP = JsonOutput.toJson(list)
message.setBody(jsonOP)
return message;
}
Replace
it.version=Integer.parseInt(it.get("version").toString().replace(" ",""));
with
it.version=it.get("version").toString().toInteger();
see the ref toInteger.
Your json is incorrect because there are single quotes used for some values. However you could try LAX parser to ignore this issue.
def jsonSlurper = new JsonSlurper().setType(JsonParserType.LAX)
If the json from question is coming through the message body then just change
list.each{
it.version=Integer.parseInt(it.get("version").toString().replace(" ",""));
}
To
list.version = list.version as Integer
#daggett is right, you can do like he said.
It seems that the value of that object is a string, not a problem of quotes.
You can check the class of any the object with:
println(it.version.getClass())
if it's a string you can change it in various ways but if its a string you could simply use the below - I'm putting it in more lines just for better visibility but the result is the same as the inline from daggett
def newInt = it.version.toInteger()
it.version = newInt
There are other ways to do the same thing if you really need to convert it.
here a guide:
https://www.baeldung.com/groovy-convert-string-to-integer
Maybe changing the value from string to int in that class creating the JSON is the best way to go.
Related
From a separate system I get a String parameter "messageJson" whose content is in the form:
{"agent1":"smith","agent2":"brown","agent3":{"agent3_1":"jones","agent3_2":"johnson"}}
To use it in my program I parse it with JsonSlurper.
def myJson = new JsonSlurper().parseText(messageJson)
But the resulting Json has the form:
[agent1:smith, agent2:brown, agent3:[agent3_1:jones, agent3_2:johnson]]
Note the square brackets and the lack of double quotes. How can I parse messageJson so that the original structure is kept?
Ok, thanks to the hint by cfrick, I was able to find a solution. In case anyone else has a similar problem, all I needed to do was using JsonOutput in the end to convert the map back to a Json
I.E. :
def myJson = new JsonSlurper().parseText(messageJson)
myJson << [agent4:"jane"]
def backToJson = JsonOutput.toJson(myJson)
I have a json which has some numbers that I want to make dynamic and replace the value using groovy. Please let me know if there is a better way as I have already used toInteger to convert but not working.
For ex
{
jobName:"",
protocolName:"tcp",
portNo:""
}
I am able to replace the job-name which is string using replace in groovy but I am not able to replace the port number. The final json should look like below
{
jobName:"myjob",
protocolName:"tcp",
portNo:1112
}
Please let me know if there is a way to do that in groovy
Something like this:
String str = '{ "jobName":"", "protocolName":"tcp", "portNo":"" }'
def json = new JsonSlurper().parseText(str)
json.jobName = 'myJob'
json.portNo = 1112
println new JsonOutput().prettyPrint(new JsonOutput().toJson(json))
I am working with SoapUI and are really new to this. I am supposed to make a few REST tests, a lot of them have to do with dynamic resources so I have to read some json results on runtime. This works fine the first time I do it:
...
def response = context.expand('${Get ContractModels#Response}')
def slurper = new JsonSlurper().parseText(response)
for (i in slurper.ContractModels){
testRunner.testCase.testSteps["ContractModelOptionStep"].setPropertyValue("id",sprintf('%d',i.ContractModelID));
testRunner.runTestStepByName("ContractModelOptionStep")
def innerResponse = context.expand('${Get ContractModelOptionStep#Response}')
log.info(response)
log.info(innerResponse)
def innerSlurper = new JsonSlurper().parseText(innerResponse);
...
}
This works well up to the last line, where it tells me The JSON input text should neither be null nor empty. Thanks to the log.info I found out the JSON Strong of innerResponse is actually empty. Now my problem is I have no clue why, runTestStepByName works perfectly fine and gives the expected response.
Cheers
In these two lines:
testRunner.runTestStepByName("ContractModelOptionStep")
def innerResponse = context.expand('${Get ContractModelOptionStep#Response}')
the name of the test step does not match! Try:
def innerResponse = context.expand('${ContractModelOptionStep#Response}')
Please pardon me if this is a repeat question. I have been through some of the questions/answers with a similar requirement but somehow got a bit overwhelmed and confused at the same time. My requirement is:
I get a JSON string/object as a request parameter. ( eg: params.timesheetJSON )
I then have to parse/iterate through it.
Here is the JSON that my grails controller will be receiving:
{
"loginName":"user1",
"timesheetList":
[
{
"periodBegin":"2014/10/12",
"periodEnd":"2014/10/18",
"timesheetRows":[
{
"task":"Cleaning",
"description":"cleaning description",
"paycode":"payCode1"
},
{
"task":"painting",
"activityDescription":"painting description",
"paycode":"payCode2"
}
]
}
],
"overallStatus":"SUCCESS"
}
Questions:
How can I retrieve the whole JSON string from the request? Does request.JSON be fine here? If so, will request.JSON.timesheetJSON yield me the actual JSON that I want as a JSONObject?
What is the best way to parse through the JSON object that I got from the request? Is it grails.converters.JSON? Or is there any other easy way of parsing through? Like some API which will return the JSON as a collection of objects by automatically taking care of parsing. Or is programatically parsing through the JSON object the only way?
Like I said, please pardon me if the question is sounding vague. Any good references JSON parsing with grails might also be helpful here.
Edit: There's a change in the way I get the JSON string now. I get the JSON string as a request paramter.
String saveJSON // This holds the above JSON string.
def jsonObject = grails.converters.JSON.parse(saveJSON) // No problem here. Returns a JSONObject. I checked the class type.
def jsonArray = jsonArray.timesheetList // No problem here. Returns a JSONArray. I checked the class type.
println "*** Size of jsonArray1: " + jsonArray1.size() // Returns size 1. It seemed fine as the above JSON string had only one timesheet in timesheetList
def object1 = jsonArray[1] // This throws the JSONException, JSONArray[1] not found. I tried jsonArray.getJSONObject(1) and that throws the same exception.
Basically, I am looking to seamlessly iterate through the JSON string now.
I have wrote some code that explains how this can be done, that you can see below, but to be clear, first the answers to your questions:
Your JSON String as you wrote above will be the contents of your POST payload to the rest controller. Grails will use its data binding mechanism to bind the incomming data to a Command object that your should prepare. It has to have fields corresponding to the parameters in your JSON String (see below). After you bind your command object to your actual domain object, you can get all the data you want, by simply operating on fields and lists
The way to parse thru the JSON object is shown in my example below. The incomming request is esentially a nested map, with can be simply accessed with a dot
Now some code that illustrates how to do it.
In your controller create a method that accepts "YourCommand" object as input parameter:
def yourRestServiceMethod (YourCommand comm){
YourClass yourClass = new YourClass()
comm.bindTo(yourClass)
// do something with yourClass
// println yourClass.timeSheetList
}
The command looks like this:
class YourCommand {
String loginName
List<Map> timesheetList = []
String overallStatus
void bindTo(YourClass yourClass){
yourClass.loginName=loginName
yourClass.overallStatus=overallStatus
timesheetList.each { sheet ->
TimeSheet timeSheet = new TimeSheet()
timeSheet.periodBegin = sheet.periodBegin
timeSheet.periodEnd = sheet.periodEnd
sheet.timesheetRows.each { row ->
TimeSheetRow timeSheetRow = new TimeSheetRow()
timeSheetRow.task = row.task
timeSheetRow.description = row.description
timeSheetRow.paycode = row.paycode
timeSheet.timesheetRows.add(timeSheetRow)
}
yourClass.timeSheetList.add(timeSheet)
}
}
}
Its "bindTo" method is the key piece of logic that understands how to get parameters from the incomming request and map it to a regular object. That object is of type "YourClass" and it looks like this:
class YourClass {
String loginName
Collection<TimeSheet> timeSheetList = []
String overallStatus
}
all other classes that are part of that class:
class TimeSheet {
String periodBegin
String periodEnd
Collection<TimeSheetRow> timesheetRows = []
}
and the last one:
class TimeSheetRow {
String task
String description
String paycode
}
Hope this example is clear enough for you and answers your question
Edit: Extending the answer according to the new requirements
Looking at your new code, I see that you probably did some typos when writting that post
def jsonArray = jsonArray.timesheetList
should be:
def jsonArray = jsonObject.timesheetList
but you obviously have it properly in your code since otherwise it would not work, then the same with that line with "println":
jsonArray1.size()
shuold be:
jsonArray.size()
and the essential fix:
def object1 = jsonArray[1]
shuold be
def object1 = jsonArray[0]
your array is of size==1, the indexing starts with 0. // Can it be that easy? ;)
Then "object1" is again a JSONObject, so you can access the fields with a "." or as a map, for example like this:
object1.get('periodEnd')
I see your example contains errors, which lead you to implement more complex JSON parsing solutions.
I rewrite your sample to the working version. (At least now for Grails 3.x)
String saveJSON // This holds the above JSON string.
def jsonObject = grails.converters.JSON.parse(saveJSON)
println jsonObject.timesheetList // output timesheetList structure
println jsonObject.timesheetList[0].timesheetRows[1] // output second element of timesheetRows array: [paycode:payCode2, task:painting, activityDescription:painting description]
I have code that looks like this:
def client = new groovyx.net.http.RESTClient('myRestFulURL')
def json = client.get(contentType: JSON)
net.sf.json.JSON jsonData = json.data as net.sf.json.JSON
def slurper = new JsonSlurper().parseText(jsonData)
However, it doesn't work! :( The code above gives an error in parseText because the json elements are not quoted. The overriding issue is that the "data" is coming back as a Map, not as real Json. Not shown, but my first attempt, I just passed the parseText(json.data) which gives an error about not being able to parse a HashMap.
So my question is: how do I get JSON returned from the RESTClient to be parsed by JsonSlurper?
The RESTClient class automatically parses the content and it doesn't seem possible to keep it from doing so.
However, if you use HTTPBuilder you can overload the behavior. You want to get the information back as text, but if you only set the contentType as TEXT, it won't work, since the HTTPBuilder uses the contentType parameter of the HTTPBuilder.get() method to determine both the Accept HTTP Header to send, as well was the parsing to do on the object which is returned. In this case, you need application/json in the Accept header, but you want the parsing for TEXT (that is, no parsing).
The way you get around that is to set the Accept header on the HTTPBuilder object before calling get() on it. That overrides the header that would otherwise be set on it. The below code runs for me.
#Grab(group='org.codehaus.groovy.modules.http-builder', module='http-builder', version='0.6')
import static groovyx.net.http.ContentType.TEXT
def client = new groovyx.net.http.HTTPBuilder('myRestFulURL')
client.setHeaders(Accept: 'application/json')
def json = client.get(contentType: TEXT)
def slurper = new groovy.json.JsonSlurper().parse(json)
The type of response from RESTClient will depend on the version of :
org.codehaus.groovy.modules.http-builder:http-builder
For example, with version 0.5.2, i was getting a net.sf.json.JSONObject back.
In version 0.7.1, it now returns a HashMap as per the question's observations.
When it's a map, you can simply access the JSON data using the normal map operations :
def jsonMap = restClientResponse.getData()
def user = jsonMap.get("user")
....
Solution posted by jesseplymale workes for me, too.
HttpBuilder has dependencies to some appache libs,
so to avoid to add this dependencies to your project,
you can take this solution without making use of HttpBuilder:
def jsonSlurperRequest(urlString) {
def url = new URL(urlString)
def connection = (HttpURLConnection)url.openConnection()
connection.setRequestMethod("GET")
connection.setRequestProperty("Accept", "application/json")
connection.setRequestProperty("User-Agent", "Mozilla/5.0")
new JsonSlurper().parse(connection.getInputStream())
}