I updated to Monterey last week and since then my Hysplit GUI is not displaying properly. it is not an issue with my laptop's display (I have changed and inverted the colours). I have attached screenshots of what it usually looks like and what it looks like now.
I think that this is an issue with Wish - which runs .tcl files. The Hysplit GUI is built on .tcl files. I have attached screenshots of what one of the examples from Wish are showing up as. I have tried to update/figure out what is wrong with Wish but I am limited in my understanding of how it works.
Thanks for the help.
Now:
Before:
Example Wish application:
It seems that the Tcl/Tk version (8.5) shipped with macOS Monterey is broken.
A possible fix:
use the version shipped with Homewrew
Assuming Homebrew is already setup, do:
$ brew upgrade
$ brew install tcl-tk
Then setup a link to the new version of wish:
$ cd /usr/local/bin
$ ln -s ../Cellar/tcl-tk/8.6.12/bin/wish wish
# Eventually replace 8.6.12 with the version exposed by:
$ brew info tcl-tk
Restart your terminal and all wish-based utilities should work well!
Related
MySQL Workbench on Mac (10.14) opens only for a moment and closes immediately without any (visible) error message. Re-installing it does not solve the problem.
What can I do to fix this problem?
MySQLWorkbench need Python3.7 Framework in /Library/Frameworks/Python.framework/Versions
brew install python#3.7
sudo cp -r /usr/local/Cellar/python#3.7/3.7.12/Frameworks/Python.framework/Versions/3.7 /Library/Frameworks/Python.framework/Versions
open MySQLWorkbench, it's work
One solution worked with me:
System Preferences -> Security & Privacy -> click “Open Anyway”.
And don't forget to unlock the Lock icon at the bottom left.
I solved downloading an older version of Workbench (8.0.20)
I faced this problem when my mac was updated to Monterey. I downloaded the workbench again from this link Official Mysql and installed it. I replaced the older workbench into my Applications and was able to retrieve servers i setup with the older workbench.
Cheers.
There are a couple of things potentially going on.
One is the Mac Security and Privacy control, addressed nicely by Mahmoud Mostafa in another answer.
But even once that's gotten around, there is the problem of where this app is looking for Python. Running Catalina 10.15.7, I used the terminal command suggested by Phil Nguyen and got a different error message:
Fatal Python error: initfsencoding: unable to load the file system codec, sys.path = ['/Applications/MySQLWorkbench.app/Contents/Resources/libraries', '/Library/Frameworks/Python.framework/Versions/3.7/lib/python37.zip', '/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7', '/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7/lib-dynload']
ModuleNotFoundError: No module named 'encodings'
To my surprise, I saw that there was no Python.framework within /Library/Frameworks/ at all. I'd been using Anaconda, which installed Python under my user directory.
As I had also installed Xcode tools, I just made a symbolic link* within /Library/Frameworks/ pointing to the Python framework at
/Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework
and changed the name of the symbolic link to Python.framework. That provides a Python 3.7 instead of forcing things back to Python 2 or using an old version of Workbench. Worked for me; YMMV.
*This needs to be a symbolic link made by ln -s in a Terminal window and not a Finder-generated alias. Working in /Library/Frameworks/ will require sudo.
I had the same issue as above. Downloading the older version from archives resolved the issue.
macOS Monterey, using version ( 8.0.29 ) solved the issue
Open your terminal and type:
/Applications/MySQLWorkbench.app/Contents/MacOS/MySQLWorkbench --verbose
if your terminal said:
Your PYTHONPATH points to a site-packages dir for Python 3.x but you are running Python 2.x!
PYTHONPATH is currently: ":/Applications/MySQLWorkbench.app/Contents/Resources/libraries"
You should `unset PYTHONPATH` to fix this.
Type this:
export PYTHONPATH=/usr/local/lib/python2.7/site-packages/
If you are using macOS 10.15 or lesser version just switch to older version of workbench(8.0.11), which is the stabile version and compatible with macOS 10.15 or lesser version. For download Click here
I upgraded the OS and I faced the issue with the Workbench. It was not loading. So, I downloaded it and installed it again. I got an option to keep both or replace them. I choose to Replace. This resolved the loading issue. Now, it's opening.
Try running the following command in your terminal, to remove the app from quarantine:
xattr -d com.apple.quarantine /path/to/MySQLWorkbench.app
Note that the default path is /Applications, i.e., the default filename is /Applications/MySQLWorkbench.app
I just installed newer version and it automatically replaced the old version and it worked!
/Applications/MySQLWorkbench.app/Contents/MacOS/MySQLWorkbench --verbose
I opened with this command once and it after that it started opening normally.
PS I have python 3.7 installed
I also have faced a similar problem after upgrading MAC OS To Monterey,
The solution worked just upgrade your MySQL Workbench 8.0.30.
Link: https://dev.mysql.com/downloads/workbench/
How can I find the latest version of Google Chrome from a shell script (e.g. bash) on Linux ?
For ChromeDriver, I can do this:
curl https://chromedriver.storage.googleapis.com/LATEST_RELEASE
Can I do something similar for Chrome?
Background to question
T
his needs to be done in a pipeline and there is no local install of Chrome, no tools to inspect packages (rpm, deb, and the like). The reason I want this is so that I can download the latest version as a numbered package. I could do this
wget -O https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
but that results in a file called google-chrome-stable_current_amd64.deb rather than one that is version stamped such as google-chrome-stable_73.0.3683.103-1_amd64.deb.
If I know the version in advance, I can get a version-stamped file using this:
GOOGLE_CHROME_VERSION=73.0.3683.103-1
wget http://dl.google.com/linux/deb/pool/main/g/google-chrome-stable/google-chrome-stable_${GOOGLE_CHROME_VERSION}_amd64.deb
So what I'm really looking for is either generic URL that always returns the latest version-stamped file or a way to set GOOGLE_CHROME_VERSION in the above.
If you are using Ubuntu Desktop like mine 16.04, here is the command
google-chrome --version
ref. https://askubuntu.com/a/505532/22308
I want to downgrade my chrome on Ubuntu
Because I have problems when selenium runs against Chrome 34.
I have installed chrome 33.
But then every once in a while the auto-updater update the chrome.
How can i disable the auto-upadter on Linux specifically?
I had a similar task recently. This is the script I ran to download previous Chrome version, disable auto update and check the installed version:
sudo wget http://dl.google.com/linux/chrome/deb/pool/main/g/google-chrome-stable/google-chrome-stable_75.0.3770.142-1_amd64.deb && \
sudo dpkg -i google-chrome-stable_75.0.3770.142-1_amd64.deb && \
sudo apt-mark hold google-chrome-stable && \
google-chrome-stable --version \
you can google to find an archive website. I have mentioned 2 of them here, though there are hundreds of them around.
0- choose the version you want to install by going to an archive website like this:
http://www.ubuntuupdates.org/pm/google-chrome-stable
1- In the Download section download the 64-Bits or 32-Bits package suitable for your OS ( or you can directly Press APT_INSTALL button)
3- Install the package using Ubuntu software center. you may need to remove the existing version first.
4- for disabling auto updates you can go to SystemSettings/ Software & Updates from Ubuntu applications Menu
Doing the same things command line:
I assume your user name is "user" you replace it with your username.
1- Browse the website http://www.slimjet.com/chrome/google-chrome-old-version.php or any other archive website.
2- Download a proper version of google-chrome ( I brought 49.0.2623.75 Linux_64)
3- Save the downloaded file in /home/user/Downloads
4- Open a console and execute the following commands:
user#host:~/workspace $ cd ~/Downloads/
user#host:~/Downloads $
user#host:~/Downloads $ sudo dpkg -i ./chrome64_49.0.2623.75.deb
of course you would replace the file name with the one you downloaded.
You can search for software and updates in your dash bar
You can click on Softwares and updates app which is listed
Go to the other Software tab in the window which is opened
you can uncheck the http://dl.google.com/linux/chrome/deb/stable main
and then you can uninstall the new version of chrome and install the old one.
Hope this helps.
I've been trying to access a 6th generation iPod nano on linux. I tried the gtkpod that comes with Debian Squeeze and it seems it doesn't support the 6th generation nano. So I tried iTunes under wine and it barely installed and wasn't very functional. Then I tried foobar2000 under wine, which did install but didn't seem to detect my ipod.
I've now tried to compile gtkpod 2.0.2, but I'm getting issues with libtool trying to compile libgpod, and I don't even know if gtkpod 2.0.2 supports the 6th generation nano, although I did see a few references to the 6th generation nano in gtkpod's changelog.
Anyone know the best approach here?
Warning: the following solution should ONLY be used for iPod nano 6th gen.
The following is said on the gtkpod homepage:
The ipod nano 6th generation CANNOT be written to unless a binary-only blob is used
The binary (originally written for Ubuntu 12.04) can be downloaded and extracted from here or here and should work on Ubuntu (I tested it on Ubuntu 18.04) and Slackware.
You can find out if your system is 64-bit or 32-bit with the command uname -i. It will return i386 for 32-bit and x86_64 for 64-bit.
Extract the archive file.
Read the readme.md.
For 64-bit Ubuntu run:
sudo ./install_64bit.sh
For 32-bit Ubuntu run:
sudo ./install_32bit.sh
After that libgpod-based software like gtkpod, Banshee, Rhythmbox, Amarok, Clementine (and its new fork Strawberry), gPodder and a few others should work with iPod nano 6th gen.
Well... I just compiled gtkpod 2.0.2 and libgpod 0.8.2 and didn't get it to work. ALTHOUGH in the readme it seems to indicate that you COULD get it to work if you got a file that was already on that and did some reverse hackery to get the hash72. Sounds like a bit of work and I haven't done that yet. I'll be trying, but need to load some music on it first.
What's odd is that gtkpod did copy files over, just not seen on the nano. I'm sure I need to get the hash correct then I'll be ok.
I'm trying to use Ruby with the MySQL that comes with MAMP, but there is a problem with the headers not being installed (or something like that).
Someone referred me to the tutorial copied below but I can't get it to work. When I put in the first line ./configure... it says no such directory.
1) One question in particular is, it says, "copy the MySQL source file (mysql-5.1.37.tar.gz) to somewhere on your hard drive." I don't know if by installing MAMP I have already done this step or not. If not, then I don't know what to do.
2) I also don't know what it means when it says "untar" the source file and "cd"...If MAMP is installed, has it been untarred already?
3) Also, do would I just open the terminal and start this code, or do I have to go into Mysql?
I wonder if anyone can tell me how to adapt it. Here are 2 other pieces of information about my installation that might be helpful.
a). MySQL is set up on port 8889 on my computer.
b) Also when I enter "which mysql" in the command line, it responds with "/usr/local/mysql/bin/mysql."
Please help if you can. Thanks.
Download the latest MAMP dmg file.
Download the 1.8.2 (or whichever the latest one you could find) components file from this page.
Unzip, mount the dmg, then copy the MySQL source file (mysql-5.1.37.tar.gz) to somewhere on your hard drive.
Untar the MySQL source file, and `cd` to the source file directory.
Compile the library:
$ ./configure --with-unix-socket-path=/Applications/MAMP/tmp/mysql/mysql.sock --without-server --prefix=/Applications/MAMP/Library
$ make -j2
Copy the compiled libraries into MAMP:
$ cp libmysql/.libs/*.dylib /Applications/MAMP/Library/lib/mysql
Copy the MYSQL headers into MAMP:
$ mkdir /Applications/MAMP/Library/include
$ cp -R include /Applications/MAMP/Library/include/mysql
Install the Ruby MySQL Gem, on Snow Leopard:
$ sudo env ARCHFLAGS="-arch x86_64" gem install mysql -- --with-mysql-config=/Applications/MAMP/Library/bin/mysql_config
On Leopard:
$ sudo env ARCHFLAGS="-arch i386" gem install mysql -- --with-mysql-config=/Applications/MAMP/Library/bin/mysql_config
Enjoy!
EDIT # 2009-11-23: If you’re still experiencing problems (perhaps with RVM), try adding “/Applications/MAMP/Library/bin/” to your $PATH in “~/.bash_profile”.
You should probably follow the tutorial in this link. It is updated for MAMP 1.9.5 with mysql2. A couple of changes have been made to the new MAMP version.
http://blog.mirotin.net/?p=35
Furthermore the tar file you need can be found at this link. Download the MAMP_components_1.9.5.dmg file.
http://sourceforge.net/projects/mamp/files/mamp/1.9.5/
Finally got through this with this blog post: http://newfangled.me/installing-mamp-and-rails-on-a-mac/
Here's the archived version of that incase it goes offline http://web.archive.org/web/20130728130916/http://newfangled.me/installing-mamp-and-rails-on-a-mac
The other answer's reference 404s for me. http://blog.mirotin.net/?p=35
I'd been struggling with this for a while myself.