I have KDE neon and recently it was upgraded to the latest version, 5.23. The problem I have that System Monitor Indicator widgets no longer working, they are just empty, like this:
When I open settings for that widget and go to Sensors page, there are no sensors available
I have the same issue on at least 2 different installations. Strangely, I can't find any informaiton about it anywhere. Is there any fix available?
Check if you have ksystemstats installed by running it in Konsole.
ksystemstats
If it appears not found or not installed, try to install it.
sudo apt install ksystemstats
then try again running in konsole (you will see that it initializes)
ksystemstats
and finally open System Monitor.
Related
MySQL Workbench on Mac (10.14) opens only for a moment and closes immediately without any (visible) error message. Re-installing it does not solve the problem.
What can I do to fix this problem?
MySQLWorkbench need Python3.7 Framework in /Library/Frameworks/Python.framework/Versions
brew install python#3.7
sudo cp -r /usr/local/Cellar/python#3.7/3.7.12/Frameworks/Python.framework/Versions/3.7 /Library/Frameworks/Python.framework/Versions
open MySQLWorkbench, it's work
One solution worked with me:
System Preferences -> Security & Privacy -> click “Open Anyway”.
And don't forget to unlock the Lock icon at the bottom left.
I solved downloading an older version of Workbench (8.0.20)
I faced this problem when my mac was updated to Monterey. I downloaded the workbench again from this link Official Mysql and installed it. I replaced the older workbench into my Applications and was able to retrieve servers i setup with the older workbench.
Cheers.
There are a couple of things potentially going on.
One is the Mac Security and Privacy control, addressed nicely by Mahmoud Mostafa in another answer.
But even once that's gotten around, there is the problem of where this app is looking for Python. Running Catalina 10.15.7, I used the terminal command suggested by Phil Nguyen and got a different error message:
Fatal Python error: initfsencoding: unable to load the file system codec, sys.path = ['/Applications/MySQLWorkbench.app/Contents/Resources/libraries', '/Library/Frameworks/Python.framework/Versions/3.7/lib/python37.zip', '/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7', '/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7/lib-dynload']
ModuleNotFoundError: No module named 'encodings'
To my surprise, I saw that there was no Python.framework within /Library/Frameworks/ at all. I'd been using Anaconda, which installed Python under my user directory.
As I had also installed Xcode tools, I just made a symbolic link* within /Library/Frameworks/ pointing to the Python framework at
/Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework
and changed the name of the symbolic link to Python.framework. That provides a Python 3.7 instead of forcing things back to Python 2 or using an old version of Workbench. Worked for me; YMMV.
*This needs to be a symbolic link made by ln -s in a Terminal window and not a Finder-generated alias. Working in /Library/Frameworks/ will require sudo.
I had the same issue as above. Downloading the older version from archives resolved the issue.
macOS Monterey, using version ( 8.0.29 ) solved the issue
Open your terminal and type:
/Applications/MySQLWorkbench.app/Contents/MacOS/MySQLWorkbench --verbose
if your terminal said:
Your PYTHONPATH points to a site-packages dir for Python 3.x but you are running Python 2.x!
PYTHONPATH is currently: ":/Applications/MySQLWorkbench.app/Contents/Resources/libraries"
You should `unset PYTHONPATH` to fix this.
Type this:
export PYTHONPATH=/usr/local/lib/python2.7/site-packages/
If you are using macOS 10.15 or lesser version just switch to older version of workbench(8.0.11), which is the stabile version and compatible with macOS 10.15 or lesser version. For download Click here
I upgraded the OS and I faced the issue with the Workbench. It was not loading. So, I downloaded it and installed it again. I got an option to keep both or replace them. I choose to Replace. This resolved the loading issue. Now, it's opening.
Try running the following command in your terminal, to remove the app from quarantine:
xattr -d com.apple.quarantine /path/to/MySQLWorkbench.app
Note that the default path is /Applications, i.e., the default filename is /Applications/MySQLWorkbench.app
I just installed newer version and it automatically replaced the old version and it worked!
/Applications/MySQLWorkbench.app/Contents/MacOS/MySQLWorkbench --verbose
I opened with this command once and it after that it started opening normally.
PS I have python 3.7 installed
I also have faced a similar problem after upgrading MAC OS To Monterey,
The solution worked just upgrade your MySQL Workbench 8.0.30.
Link: https://dev.mysql.com/downloads/workbench/
We have failed trying to install Chrome version google-chrome-stable-70.0.3538.77-1.x86_64 on Redhat linux environment version 7.2.
We have created a yum repository and had done yum install google-chrome-stable but it fails at a step looking up for liberation-fonts stating requires liberation-fonts.
All the fonts with latest version are installed on it. I am attaching the installation logs and list of fonts installed on server.
I also tried install with .rpm link still had the same issue, and just to filter it out installed on different server of same os- still had same error.
Link to Logs:
Link to List of fonts:
Just to add we had no trouble with version 69.0.3497.92 and Google doesn't allow us to download previous versions of Chrome - at least for Redhat OS.
For what it's worth, I resolved this by installing it via rpm a package from a CentOS mirror on my laptop running redhat. In particular I installed this package: liberation-fonts-1.07.2-16.el7.noarch.rpm. Being a noarch file concerning fonts I wasn't concerned too much where it came from. I have doubts even the Chrome really needs this package since my installation had already several packages for liberation-fonts, including libertation-fonts-common but it allowed the chrome package to be installed.
I am trying to install MySQL on a Windows 10 PC. I downloaded the installer package and followed those steps
Went to https://dev.mysql.com/downloads/windows/
clicked on "MySQL Installer"
Scrolled to Generally Available(GA) Releases section
Clicked on "Windows (x86, 32-bit), MSI Installer" (mysql-installer-community-5.7.21.0.msi) and it started the download.
Once the download was complete, I double clicked on the installer and it gave a usual pop-up for any installation like,"Do you want this app to make changes to your device?" after clicking on "yes" for the answer to this question, it shows "Please wait while Windows configures MySQL-Installer-community" like below screenshot.
And then it keeps showing this installation progress bar for a very long time. Like more than 7-8 hours and the installation never completes
So it seems something is wrong as I don't think MySQL installation needs this long time. I tried to restart my computer and then delete any files related to MySQL from my computer and then started the whole process of installation again. But no luck yet
Anyone has any suggestion on this or did anyone face this kind of issue before? If so, is there a fix or a work around for this?
ok. So finally this is how I resolved my issue. And I found the solution at https://bugs.mysql.com/bug.php?id=82004 . The solution to this problem is to close an open "Windows installer" (the one using 0 memory and CPU) via task manager and the installation should begin running as expected.
Alternative solution: Use an administrator command prompt to run the MySQL installer on Windows 10. Details:
(Note: if you have any problems in the following steps, you can try to restart your computer. Then restart the steps.)
Right-click the Start/Windows icon in the bottom-left corner of Windows.
Click: Windows PowerShell (Admin).
A window asks: Do you want to allow this app to make changes to your device? Click: Yes.
Change to the directory with the MySQL installer. For example, if you downloaded the MySQL installer, type something like:
cd C:\Users\my_username\Downloads\
(Note: To save some typing, you can type a few characters, and then press the tab key, to make Windows show you various auto-completion options.)
Run the MySQL installer. Type something like the following command---make sure to include the period and backslash at the beginning---and press Enter.
.\mysql-installer-community-8.0.11.0.msi
Note: The idea of using an administrator command prompt came from John Geffe, in the link below, which was cited in the answer written by the original poster (user8425592):
https://bugs.mysql.com/bug.php?id=82004
Bug #82004 MySQL Installer freezes during "Please wait while Windows configures..." phase
[6 Feb 3:58] John Geffe
To get past this problem I had to run the .msi installer from an the
Administrator command prompt. Hopefully this helps someone in the
future.
[19 Apr 18:14] Jim McCauley
John Geffe: Thanks! Your note on installing as an administrator seems
to have taken care of the problem.
this did the trick for me: https://ao.ms/mysql-community-server-msi-installer-hangs-on-windows-10/
run cmd (commandline) as Administrator
cd to your location that you downloaded the .MSI to
run the “msiexec” commandline tool with option “/i” as follows:
msiexec /i [replace with file name]
example: msiexec /i mysql-installer-community-5.7.20.0.msi
Another thing that worked for me was running the installer in compatibility mode for previous version of Windows. You can try that as well.
Go to the link you provided (the first one) and try installing MySql Workbench. That is the version that is commonly used, and one that I verified works in Windows 10. Here is the link: https://dev.mysql.com/downloads/workbench/
Obviously, make sure you choose the right architecture, have the correct permissions to install software, and have enough space on your hard drive, or on the machine you are installing to.
Please install "Update for Visual C++ 2013 and Visual C++ Redistributable Package" from Microsoft Site "http://download.microsoft.com/download/0/5/6/056DCDA9-D667-4E27-8001-8A0C6971D6B1/vcredist_x64.exe"
Please look here at https://support.microsoft.com/en-in/help/3179560/update-for-visual-c-2013-and-visual-c-redistributable-package
Yes, I also got the same problem on my Windows 10.
Followed the Powershell solution and it worked.
Just repeat the above:
Click Start on bottom left corner
Scroll down the application list until Windows Powershell
Select Windows Powershell again on sub-menu
Type in cd (to change to your .msi folder)
Type .\xxxxx.msi (this is the installer file name)
All good.
Once you install the above package run the installer again and do the steps. You will be able to install the mysql-installer-community-5.7.21.0 for 64 bit windows 10
closing Windows Installer instances using 0 memory and CPU helps me to get past this problem.
For me on Window-10 machine, there was a problem with the "mysql-connector-net-8.0.11.msi". I was not able to uninstall this and hence all my subsequent efforts to install MySQL were failing. I did the following to overcome this issue.
Re-installed "mysql-connector-net-8.0.11.msi" Get it here and used the 'Repair' option
Installed the "mysql-installer-web-community-8.0.11.0.msi"
These two things solved my problem. Hope this helps.
The reson is your antivirus didn't allow the mysql, so Disable protection(until restart),( in your task bar right side click the arrow and right click to antivirus,to select (Disable protection(until restart)).then restart your computer again install mysql installer it will work.
For this issue just run .msi file in command administration like
E:\mysql-installer-community-8.0.20.0.msi\
follow this link:
https://kb.foxitsoftware.com/hc/en-us/articles/360040660611-How-to-install-MSI-from-command-line-with-administrator
In my case, an upgrade to 5.7.29 on Windows 10 via mysql-installer-web-community-8.0.20.0.msi, the install froze "backing up the database". The log tab showed no activity for 8 minutes. I clicked on cancel, then at the "are you sure" prompt I declined to cancel, and all of a sudden the install was working again. Very strange...
I encountered the same problem, preparing but can never get started. Tried to close other installation programs with no use, but I took the inspiration and proceeded with restart the computer and it worked nicely. So, I think the issue is to get rid of everything that could be in the background running that somehow interferes the installation.
You should run the installer as an administrator but this specific installation may not provide an option for this. Some might have it but it's most likely that it's unavailable for many users. So you should run it in cmd or powershell. And don't forget to run these shells as an administrator coz that's the whole point here. Once there, navigate to the installer's location which usually is in the downloads directory and run it using this command ./name.msi
Make sure no other ongoing installation of this instance. Close it if there exists one and undo the changes made by uninstalling it from the panel. If still facing difficulties, try restarting your machine and repeat this procedure...
Have fun
I had the same Problem, A simple solution is to give access the "SYSTEM" to the msiserver...I know, this is hard to understand what I am saying....You can Simply see this Video and you will definitely find the answer https://www.youtube.com/watch?v=6SdXMjXmnUk, It is a matter of just 3 minutes...
I encountered the same issue of taking too much time to install mysql community installer.I tried 3 times by cancelling the installation and restarting to perform a new installation.But had same issue. I tried 2 things
First to end all tasks associated with installation which I performed for installing mysql using Task Manager
Reinitiated the installation but didn't solved my issue.
Secondly tried to install through Windows Powershell as admin, which solved the problem.
Click on the Windows icon/start on the bottom left corner.
Right click and select the option Windows Powershell (Admin).
A pop up window will ask Do you want to allow this app to make changes to your device?....Click Yes.
Now cd to your downloads folder/wherever you downloaded the .msi file (For example cd C:\Users\MYPC\Downloads).
Once you reach to the folder where the .msi file is kept, run the following command.
.\mysql-installer-web-community-8.0.23.0.msi (Note: this is the version which I have downloaded, modify as your version).
Google Chrome on my machine recently got updated to v44.
I'm working with Selenium WebDriver on Chrome and as soon as I updated Chrome, all my tests went dead. I use Chromedriver v2.16. My partner's PC has Chrome v42.0.2311.90 and Chromedriver v2.16. And tests run fine on his machine. Now, based on this I'm pretty sure the problem is probably not with Chromedriver.
So, how can I downgrade to Chrome 42.0.2311.90?
I've tried using an offline installer from here:
Google Chrome Alternate Offline Installer
But this always gives me the latest version to install i.e. v44.
The release that I need can be found here:
Google Chrome v42.0.2311.90 Stable Channel Update
Uninstall your current chrome version.
Remove all Chrome data for current version from: C:\Users\username\AppData\Local\Google\Chrome
Download your particular version from chrome_installer.
Disable chrome updates using instructions given on this link.
Following steps help you to install your desired google chrome version :
1 - Uninstall your current google chrome version.
2 - Download your desired google chrome version from here : Google Chrome Download
3 - Restart PC once so if any registry or temp file stored of previous google chrome then it will get refresh.
4 - Install your downloaded google chrome. And then turn off automatic chrome update.
I struggled with this same problem on Mac, trying to downgrade, and stay downgraded from Chrome 53 to 52 due to a serious bug affecting webaudio.
None of the other recommendation appear to apply any more (or on Mac OS X at least). The app attempts to upgrade itself and there doesn't be a way to configure that in a "Chrome-friendly" way.
Eventually I resorted to force...
Close and uninstall Chrome
Edit your /etc/hosts file to prevent update checks from working by overriding the DNS entry:
0.0.0.0 tools.google.com
Find and download an old release. This is left as an exercise, this was actually hard and fraught with fear of bad binaries. I was able to cross-reference MD5s from one site that didn't have downloads with another that had downloads.
Install and run the older version
Important: Check the "About" page, and point and laugh at Chrome's attempts to check in.
This is how you can use an older chrome version "in general":
Uninstall your current chrome
Install the chrome version you desire
DO NOT open chrome!! after installation
Instead disable auto-updates like here or here
Only then may you work with your desired chrome browser version
As for how to get a specific older version:
You need to google, search forums or try sites like this. It's just "grunt work" to find the version you are looking for. If you're extremely unlucky, the very version you need might even not be around any more.
If you are running on a windows machine you can leverage the package manager chocolatey, this is how we I'm doing it from Jenkins, we call a powershell that uninstalls a previous version and install a specific one: From a powershell ide script window, you need to have installed the modules for chocolatey that is a small price to pay for a lot of benefit:
choco install googlechrome --version 62.0.3202.94 -y
Then to prevent Chrome to self update I am performing this steps:
1. Verify Chrome's current version.
(Get-Item (Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\chrome.exe').'(Default)').VersionInfo
Install the version I'm aiming for:
choco install googlechrome --version 62.0.3202.94 -y
You can look for available versions here:
https://chocolatey.org/packages/GoogleChrome
(Find Version History Section)
Kill GoogleCrashHandler.exe in any of its variants 32 or 64 bits or both.
Delete the Directories
C:\Program Files (x86)\Google\Update and
C:\Program Files (x86)\Google\CrashReporter
You will loose the ability to auto update (which is the whole purpose right) and
you will loose the ability to send crash reports and piggy back on that executable to update against your will whenever google deems convenient.
5.Disable Chrome Services
I've installed Google Chrome on Hardy via the .deb file and would like to configure apt-get for automatic updates.
[I have another machine running Ubuntu Karmic where this works fine; apt-get knows the package as 'google-chrome'; I'm now using a Dell Mini 10 with Ubuntu 8.04 LTS installed]
As part of the .deb install, two entries have been added to the third- party software sources tab:
http://dl.google.com/linux/deb stable main
http://dl.google.com/linux/deb stable non-free main
However if I check for updates with either of these clicked, I get the following error:
Failed to fetch http://dl.google.com/linux/deb/dists/stable/Release Unable to find expected entry main/binary-lpia/Packages in Meta-index file (malformed Release file?)
There is a thread here which indicates others have had the same problem:
http://www.google.co.uk/support/forum/p/Chrome/thread?tid=097d103f87b49abe&hl=en
This references a further thread:
http://code.google.com/p/chromium/issues/detail?id=38608
which suggests the problem has been fixed.
Despite this I remain unable to get it to work, and none of the suggested workarounds seem to work either.
Ideas ? Thanks.
I think the issue here is that the Ubuntu installaion on your Dell Mini uses LPIA (Low Power Intel Architecture) and the Google Software Repository doesn't provide the "google-chrome" package for this architecture. Hence apt-get is giving you an error. You will have to do the updates manually using the "google-chrome" package for the i386 architecture.
On another note, the following thread provides details about repackaging an i386 package for LPIA. I hope this helps.
http://ubuntuforums.org/showthread.php?t=962835