I am trying to restrict my returned data to only those points that have start and end dates in the current month - active projects. It is behaving problematically because today is the last day of the month. I believe that tomorrow will be a problem as well (no June data included in the sample).
Here is my data set (Table 1):
Project User Effort Start_Date End_Date
------- ------- ------ -------- --------
Traffic Control DOMAIN\john.smith 0.1 5/1/2013 5/31/2013
Turboencabulator Analysis DOMAIN\mark.webber 0 5/1/2013 5/31/2013
Widget Calibration DOMAIN\mark.webber 0 5/1/2013 5/31/2013
Gizmo Creation DOMAIN\steve.green 0.1 5/1/2013 5/31/2013
Advanced Toolmaking DOMAIN\steve.green 0.6 5/1/2013 5/31/2013
Diesel Engine Diagnostics DOMAIN\steve.green 0.05 5/1/2013 5/31/2013
Cold Fusion Reactor Creation DOMAIN\steve.green 0.3 5/1/2013 5/31/2013
When using the following query today I get no returned results:
SELECT * FROM dbo.table1
WHERE Start_Date <= (getdate()) AND End_Date >= (getdate())
ORDER BY User, Start_Date
Yesterday it was returning just fine. I have data for June as well (not displayed in my sample) but I need to modify my statement such that it will reliably return data for the current month throughout the entirety of the month.
Answer - Correct WHERE statement (from comments in answer below):
WHERE (Month(Start_Date) <= Month((getdate())) AND Month(End_Date) >= Month((getdate()))) AND (YEAR(Start_Date) <= YEAR((getdate())) AND YEAR(End_Date) >= YEAR((getdate())))
Use TSQL Month function:
SELECT * FROM dbo.table1
WHERE Month(Start_Date) = Month(getdate()) AND Month(End_Date) = Month(getdate())
ORDER BY User, Start_Date
Just consolidate your WHERE statement into something like:
DATEDIFF(m, DATEFIELD, GETDATE()) = 0
The following query can take advantage of indexes since it does not perform calculations on every row. In addition, it returns as "active" any project that is active at any time during the month, e.g. a project that starts in the last week of the month and ends several months hence. And it's easy to test and modify since it separates the date arithmetic from the query.
declare #Today as Date = GetDate()
declare #StartOfMonth as Date = DateAdd( day, 1 - Day( #Today ), #Today )
declare #EndOfMonth as Date = DateAdd( day, -1, DateAdd( month, 1, #StartOfMonth ) )
select #Today as [Today], #StartOfMonth as [StartOfMonth], #EndOfMonth as [EndOfMonth]
select *
from Table1
where Start_Date <= #EndOfMonth and End_Date >= #StartOfMonth
You should try using convert(date, GetDate())GetDate().
Dates are represented as ticks, meaning smaller than seconds. if you compare GetDate() (which is 2013-05-31 11:09:45:1024 for exmaple, unsure about millisecond precision in mssql), it will always be greater than 2013-05-31, because of the hours/minutes/seconds. Your 2 choices are to compare YOURDATE >= Start_Date AND End_Date + 1 > YOURDATE, or YOURDATE >= Start_Date AND End_Date >= convert(date, YOURDATE)
First options asks for it to be stricly less than the morrow of the end date (so basically the very end of that day), second one asks for it to be within the same day as the end date, ignoring ticks. Both yields the exact same result, one of them is probably more performant, however I can't help on that side of things.
EDIT : or you can use the other two's answer, except that it will only work if you always use monthly periods. and in that case it would be simpler to redesign your database to only have a 1-12 field representing the month.
In MySql, I use something similar to update data within x number of days, perhaps something like:
start_date <= DATE_SUB(curdate(), INTERVAL 10 DAY);
Just change 10 to whatever number of days you need.
Try this for MySQL
select date(date_joined),count(*) from users where MONTH(date_joined)=MONTH(now()) and YEAR(date_joined)=YEAR(now()) group by date(date_joined);
In SQL Statement in microsoft sql server, there is a built-in function to get week number but it is the week of the year.
Select DatePart(week, '2012/11/30') // **returns 48**
The returned value 48 is the week number of the year.
Instead of 48, I want to get 1, 2, 3 or 4 (week number of the month). I think the week number of the month can be achieved by modules with Month Number of this week. For e.g.
Select DATEPART(week, '2012/11/30')%MONTH('2012/11/30')
But I want to know is there other built-in functions to get WeekNumber of the month in MS SQL SERVER.
Here are 2 different ways, both are assuming the week starts on monday
If you want weeks to be whole, so they belong to the month in which they start:
So saturday 2012-09-01 and sunday 2012-09-02 is week 4 and monday 2012-09-03 is week 1 use this:
DECLARE #date date = '2012-09-01'
SELECT (day(datediff(d,0,#date)/7*7)-1)/7+1
If your weeks cut on monthchange so saturday 2012-09-01 and sunday 2012-09-02 is week 1 and monday 2012-09-03 is week 2 use this:
DECLARE #date date = '2012-09-01'
SELECT
datediff(ww,datediff(d,0,dateadd(m,datediff(m,7,#date),0)
)/7*7,dateadd(d,-1,#date))+1
I received an email from Gerald. He pointed out a flaw in the second method. This should be fixed now
I received an email from Ben Wilkins. He pointed out a flaw in the first method. This should be fixed now
DECLARE #DATE DATETIME
SET #DATE = '2013-08-04'
SELECT DATEPART(WEEK, #DATE) -
DATEPART(WEEK, DATEADD(MM, DATEDIFF(MM,0,#DATE), 0))+ 1 AS WEEK_OF_MONTH
No built-in function. It depends what you mean by week of month. You might mean whether it's in the first 7 days (week 1), the second 7 days (week 2), etc. In that case it would just be
(DATEPART(day,#Date)-1)/7 + 1
If you want to use the same week numbering as is used with DATEPART(week,), you could use the difference between the week numbers of the first of the month and the date in question (+1):
(DATEPART(week,#Date)- DATEPART(week,DATEADD(m, DATEDIFF(m, 0, #Date), 0))) + 1
Or, you might need something else, depending on what you mean by the week number.
Just look at the date and see what range it falls in.
Range 1-7 is the 1st week, Range 8-14 is the 2nd week, etc.
SELECT
CASE WHEN DATEPART(day,yourdate) < 8 THEN '1'
ELSE CASE WHEN DATEPART(day,yourdate) < 15 then '2'
ELSE CASE WHEN DATEPART(day,yourdate) < 22 then '3'
ELSE CASE WHEN DATEPART(day,yourdate) < 29 then '4'
ELSE '5'
END
END
END
END
Similar to the second solution, less code:
declare #date datetime = '2014-03-31'
SELECT DATEDIFF(week,0,#date) - (DATEDIFF(week,0,DATEADD(dd, -DAY(#date)+1, #date))-1)
Check this out... its working fine.
declare #date as datetime = '2014-03-10'
select DATEPART(week,#date) - DATEPART(week,cast(cast(year(#date) as varchar(4))+'-' + cast(month(#date) as varchar(2)) + '-01' as datetime))+1
WeekMonth = CASE WHEN (DATEPART(day,TestDate) - datepart(dw,TestDate))>= 22 THEN '5'
WHEN (DATEPART(day,TestDate) - datepart(dw,TestDate))>= 15 THEN '4'
WHEN (DATEPART(day,TestDate) - datepart(dw,TestDate))>= 8 THEN '3'
WHEN (DATEPART(day,TestDate) - datepart(dw,TestDate))>= 1 THEN '2'
ELSE '1'
END
There is no inbuilt function to get you the week number. I dont think dividing will help you anyway as the number of weeks in a month is not constant.
http://msdn.microsoft.com/en-us/library/bb675168.aspx
I guess you can divide the number(48) by 4 and take the modules of the same and project that as the week number of that month, by adding one to the result.
Here's a suggestion for getting the first and last days of the week for a month:
-- Build a temp table with all the dates of the month
drop table #tmp_datesforMonth
go
declare #begDate datetime
declare #endDate datetime
set #begDate = '6/1/13'
set #endDate = '6/30/13';
WITH N(n) AS
( SELECT 0
UNION ALL
SELECT n+1
FROM N
WHERE n <= datepart(dd,#enddate)
)
SELECT DATEADD(dd,n,#BegDate) as dDate
into #tmp_datesforMonth
FROM N
WHERE MONTH(DATEADD(dd,n,#BegDate)) = MONTH(#BegDate)
--- pull results showing the weeks' dates and the week # for the month (not the week # for the current month)
select MIN(dDate) as BegOfWeek
, MAX(dDate) as EndOfWeek
, datediff(week, dateadd(week, datediff(week, 0, dateadd(month, datediff(month, 0, dDate), 0)), 0), dDate) as WeekNumForMonth
from #tmp_datesforMonth
group by datediff(week, dateadd(week, datediff(week, 0, dateadd(month, datediff(month, 0, dDate), 0)), 0), dDate)
order by 3, 1
A dirty but easy one liner using Dense_Rank function. Performance WILL suffer, but effective none the less.
DENSE_RANK()over(Partition by Month(yourdate),Year(yourdate) Order by Datepart(week,yourdate) asc) as Week
Here is the query that brings the week number on whatever the startday and endday of the week it may be.
SET DATEFIRST 2
DECLARE #FROMDATE DATE='12-JAN-2015'
-- Get the first day of month
DECLARE #ALLDATE DATE=DATEADD(month, DATEDIFF(month, 0, #FROMDATE), 0)
DECLARE #FIRSTDATE DATE
;WITH CTE as
(
-- Get all dates in that month
SELECT 1 RNO,CAST(#ALLDATE AS DATE) as DATES
UNION ALL
SELECT RNO+1, DATEADD(DAY,1,DATES )
FROM CTE
WHERE DATES < DATEADD(MONTH,1,#ALLDATE)
)
-- Retrieves the first day of week, ie, if first day of week is Tuesday, it selects first Tuesday
SELECT TOP 1 #FIRSTDATE = DATES
FROM CTE
WHERE DATEPART(W,DATES)=1
SELECT (DATEDIFF(DAY,#FIRSTDATE,#FROMDATE)/7)+1 WEEKNO
For more information I have answered for the below question. Can check that.
How do I find week number of a date according to DATEFIRST
floor((day(#DateValue)-1)/7)+1
Here you go....
Im using the code below..
DATEPART(WK,#DATE_INSERT) - DATEPART(WK,DATEADD(DAY,1,DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,#DATE_INSERT),0)))) + 1
Try Below Code:
declare #dt datetime='2018-03-15 05:16:00.000'
IF (Select (DatePart(DAY,#dt)%7))>0
Select (DatePart(DAY,#dt)/7) +1
ELSE
Select (DatePart(DAY,#dt)/7)
There is an inbuilt option to get the week number of the year
**select datepart(week,getdate())**
You can simply get week number by getting minimum week number of month and deduct it from week number. Suppose you have a table with dates
select
emp_id, dt , datepart(wk,dt) - (select min(datepart(wk,dt))
from
workdates ) + 1 from workdates
Solution:
declare #dt datetime='2018-03-31 05:16:00.000'
IF (Select (DatePart(DAY,#dt)%7))>0
Select (DatePart(DAY,#dt)/7) +1
ELSE
Select (DatePart(DAY,#dt)/7)
declare #end_date datetime = '2019-02-28';
select datepart(week, #end_date) - datepart(week, convert(datetime, substring(convert(nvarchar, convert(datetime, #end_date), 127), 1, 8) + '01')) + 1 [Week of Month];
Here is the tried and tested solution for this query in any situation - like if 1st of the month is on Friday , then also this will work -
select (DATEPART(wk,#date_given)-DATEPART(wk,dateadd(d,1-day(#date_given),#date_given)))+1
above are some solutions which will fail if the month's first date is on Friday , then 4th will be 2nd week of the month
Logic here works as well 4.3 weeks in every month. Take that from the DATEPART(WEEK) on every month but January. Just another way of looking at things. This would also account for months where there is a 5th week
DECLARE #date VARCHAR(10)
SET #date = '7/27/2019'
SELECT CEILING(DATEPART(WEEK,#date)-((DATEPART(MONTH,#date)-1)*4.3333)) 'Week of Month'
Below will only work if you have every week of the month represented in the select list. Else the rank function will not work, but it is a good solution.
SELECT DENSE_RANK() OVER (PARTITION BY MONTH(DATEFIELD)
ORDER BY DATEPART(WEEK,DATEFIELD) ASC) AS WeekofMont
try this one
declare #date datetime = '20210928'
select convert(int,(((cast(datepart(day,#date) as decimal(4,2))/7)-(1.00/7.00))+1.00))
select datepart(week,#date)-datepart(week,dateadd(day,1,eomonth(dateadd(m,-1,#date))))+1
or
select datepart(week,#date)-datepart(week,dateadd(d,-datepart(d,#date)+1,#date))+1
steps:
1,get the first day of month
2,week of year of the date - week of year of the first day of the month
3,+1
2023-1-1 is sunday
SET DATEFIRST 1;
DECLARE #date date = '2023-1-02';
select datepart(week,#date)-datepart(week,dateadd(day,1,eomonth(dateadd(m,-1,#date))))+1
return 2
SET DATEFIRST 7;
DECLARE #date date = '2023-1-02';
select datepart(week,#date)-datepart(week,dateadd(day,1,eomonth(dateadd(m,-1,#date))))+1
return 1
Code is below:
set datefirst 7
declare #dt datetime='29/04/2016 00:00:00'
select (day(#dt)+datepart(WEEKDAY,dateadd(d,-day(#dt),#dt+1)))/7
select #DateCreated, DATEDIFF(WEEK, #DateCreated, GETDATE())