I have an SSIS package that uses ZappySys HTML table source to connect to the web. When I run the package pointing to an environment, it runs successfully, but when I execute the package in SSISDB, it throws error " OnError View Contex df_WeatherData:Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on HTML Table Source returned error code 0x80131500. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
OnError View Context df_WeatherData:Error: System.Exception: Table not found for specified criteria
at ZappySys.PowerPack.Adapter.HtmlTableSource.HtmlTableHelper. (String , WebClient , TableFetchSettings , Boolean , Boolean , List1& ) at ZappySys.PowerPack.Adapter.HtmlTableSource.HtmlTableHelper.GetTableData(String url, WebClient webClient, TableFetchSettings settings, Boolean fetchColInfo, Boolean fetchData, List1& colInfoList, List1& linksTable, List1& imageTable, Int32& rowsAdded)
at ZappySys.PowerPack.Adapter.HtmlTableSource.HtmlDataExtractor.Process(HtmlDataExtractArgs args)
at ZappySys.PowerPack.Adapter.HtmlTableSource.HtmlTableSource.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper100 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer100[] buffers, IntPtr ppBufferWirePacket)"
Please help, I have been trying to debug this issue days now. Thanks
I figured the Environment variables values from my package, does not match with the affected environment values, which is causing the job to fail after deployment.
Related
Anyone run into this error? How do I resolve, not getting much guidance from cdata or snowflake.
Error: 0x0 at ADI_PRODUCT, CData Snowflake Source: Get data error: Retrieved Chunk#0 Timeout.
Error: 0xC0047062 at ADI_PRODUCT, CData Snowflake Source [279]: System.Exception: Get data error: Retrieved Chunk#0 Timeout.
at CData.SSIS.Snowflake.SSISSourceComponent.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper100 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer100[] buffers, IntPtr ppBufferWirePacket)
Error: 0xC0047038 at ADI_PRODUCT, SSIS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on CData Snowflake Source returned error code 0x80131500. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
I am not sure about this, but given the fact that there appears to be a timeout retrieving data (presumably from Azure's cloud storage), it might be worthwhile to verify that you are not encountering a networking issue (eg. firewall) by verifying connectivity via Snowflake's SnowCD utility. Just a thought.
I'm trying to run a simple data flow task in SSIS pulling data from Snowflake to SQL Server using a component from CDATA called Snowflake Source.
Connection works and I can also see a preview of the data but when actually running the package I get the following error message:
[CData Snowflake Source [2]] Error: System.Exception: Get data error: Received metadata with an incompatible version number
at CData.SSIS.Snowflake.SSISSourceComponent.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper100 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer100[] buffers, IntPtr ppBufferWirePacket)
Has anyone experienced this before or know what to do in order to fix it?
Hi I faced this error many time , when i use some custom script component or third party component.
Issue : We do remove or delete some component but some of the reference is not removed from package (it is very tough to debug )
Create fresh package it will work .
HTTP Status 500 - Internal Server Error
type Exception report
messageInternal Server Error
descriptionThe server encountered an internal error that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: java.lang.NullPointerException
root cause
java.lang.NullPointerException
note The full stack traces of the exception and its root causes are available in the GlassFish Server Open Source Edition 4.0 logs.
GlassFish Server Open Source Edition 4.0
I'm not able to open the stack trace. the log file under domain is empty. pls help
NullPointerException means you are trying to call a non-static method (or an attribute) of an object which is not defined.
Example:
String s = "Foo";
System.out.println(s.length());
This code prints 3, because the length of Foo is 3, and s has been initialized as Foo.
Example with NullPointerException:
String s = null;
System.out.println(s.length());
Here s is null and I try to call the method length(), which is a non-static method. Obviously I will get a NullPointerException: there is no sense to get the length of "nothing" (null).
Nevertheless, you still can call static methods with s:
String s = null;
System.out.println(s.valueOf('a'));
Prints a. Note that it is not a good way to call static methods.
The static method valueOf(char) from the type String should be accessed in a static way
This warning explains you should access valueOf(char) this way:
System.out.println(String.valueOf('a'));
Now I let you find the error in your code because you didn't share it.
I'm getting an error while trying to copy 4 tables from a MySQL source to SQL Server 2008.
Here's a photo of the Data Flow, as you can see, 2 of them are OK (the smaller ones)
With an OnError event handler I'm able to see the errors. Here they are.
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error
code: 0x80040E21. An OLE DB record is available. Source: "Microsoft
SQL Server Native Client 10.0" Hresult: 0x80040E21 Description:
"Multiple-step OLE DB operation generated errors. Check each OLE DB
status value, if available. No work was done.".
There was an error with input column "FechaHoraCorteAgente" (884) on
input "OLE DB Destination Input" (510). The column status returned
was: "Conversion failed because the data value overflowed the
specified type.".
SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE
DB Destination Input" (510)" failed because error code 0xC020907A
occurred, and the error row disposition on "input "OLE DB Destination
Input" (510)" specifies failure on error. An error occurred on the
specified object of the specified component. There may be error
messages posted before this with more information about the failure.
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on
component "OLE DB Destination 2" (497) failed with error code
0xC0209029 while processing input "OLE DB Destination Input" (510).
The identified component returned an error from the ProcessInput
method. The error is specific to the component, but the error is
fatal and will cause the Data Flow task to stop running. There may
be error messages posted before this with more information about the
failure.
The component "ado net conptacto" (1) was unable to process the data.
Exception from HRESULT: 0xC0047020
The component "ADO NET logllamados" (482) was unable to process the
data. Exception from HRESULT: 0xC0047020
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on
component "ado net conptacto" (1) returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the
component, but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more information
about the failure.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on
component "ADO NET logllamados" (482) returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the
component, but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more information
about the failure.
Any idea of what's going on in here?
"Conversion failed because the data value overflowed the specified type." seems pretty obvious, you are trying to insert something where it doesn't fit. I suggest you compare all your source columns with destination columns and make sure that:
lengths are enough
data types are compatible
you can post your tables' structures if you would like a hand on that
Source column has 0000-00-00 in a datetime field. So there was the error.
Created a Derived Column with the expression:
(DT_DBTIMESTAMP)(DAY([FechaHoraCorteAgente]) == 0 ? NULL(DT_DBTIMESTAMP) : [FechaHoraCorteAgente])
It's a failure at source, If the package fails while inserting at the destination, that's easily solvable. I have come across many situations where the source data is larger than what SSIS source is expecting to see.
I think when you create the source, SSIS automatically samples the input data to see the maximum length. But what if that maximum length were to be exceeded? That's where I see most of the problems relating to overflow.
Also, many a times when dealing with poorly handled source data, you would see a character data in a date time field. Such a scenario would also spoil the package.
I deployed a web service that used WSE 3.0 to a test server. I am getting the cryptic error below. Have any idea what this means and how to fix it? Thanks in advance!
Microsoft.Web.Services3.ResponseProcessingException: WSE910: An error happened during the processing of a response message, and you can find the error in the inner exception. You can also find the response message in the Response property. ---> System.Xml.XmlException: 'wsse' is an undeclared namespace. Line 1, position 97.
at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.Throw(String res, String arg, Int32 lineNo, Int32 linePos)
at System.Xml.XmlTextReaderImpl.LookupNamespace(NodeData node)
at System.Xml.XmlTextReaderImpl.ElementNamespaceLookup()
at System.Xml.XmlTextReaderImpl.ParseAttributes()
at System.Xml.XmlTextReaderImpl.ParseElement()
at System.Xml.XmlTextReaderImpl.ParseElementContent()
at System.Xml.XmlTextReaderImpl.Read()
at System.Xml.XmlTextReader.Read()
at Microsoft.Web.Services3.Xml.XmlSkipDTDReader.Read()
at System.Xml.XmlLoader.LoadNode(Boolean skipOverWhitespace)
at System.Xml.XmlLoader.LoadDocSequence(XmlDocument parentDoc)
at System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace)
at System.Xml.XmlDocument.Load(XmlReader reader)
at Microsoft.Web.Services3.SoapEnvelope.Load(Stream inStream)
at Microsoft.Web.Services3.Xml.SoapEnvelopeReaderWrapper..ctor(SoapClientMessage message, String messageContentType)
--- End of inner exception stack trace ---
at Microsoft.Web.Services3.Xml.SoapEnvelopeReaderWrapper..ctor(SoapClientMessage message, String messageContentType)
at Microsoft.Web.Services3.WebServicesClientProtocol.GetReaderForMessage(SoapClientMessage message, Int32 bufferSize)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
I found a solution. Since the dll was working when I called it from a windows client but was failing when called from a web service I suspected that the problem might be permissions related. I set the web service to impersonate a user with sufficient permissions. See http://support.microsoft.com/kb/306158 for how to information. Now it works. Hope this helps someone else, Dan
System.Xml.XmlException: 'wsse' is an undeclared namespace. Line 1, position 97.
Well if this statement is true then you have the wrong namespace. Check out your solution files to make sure they're under the write ns'es.
I got the same problem and it was a problem of date time synchronization between the server and the client. After setting the same time in the client and server, the error was fixed.