Related
I have a pre-existing table, containing 'fname', 'lname', 'email', 'password' and 'ip'. But now I want an auto-increment column. However, when I enter:
ALTER TABLE users
ADD id int NOT NULL AUTO_INCREMENT
I get the following:
#1075 - Incorrect table definition; there can be only one auto column and it must be defined as a key
Any advice?:)
Try this
ALTER TABLE `users` ADD `id` INT NOT NULL AUTO_INCREMENT;
for an existing primary key
If you don't care whether the auto-id is used as PRIMARY KEY, you can just do
ALTER TABLE `myTable` ADD COLUMN `id` INT AUTO_INCREMENT UNIQUE FIRST;
I just did this and it worked a treat.
If you want to add AUTO_INCREMENT in an existing table, need to run following SQL command:
ALTER TABLE users ADD id int NOT NULL AUTO_INCREMENT primary key
First you have to remove the primary key of the table
ALTER TABLE nametable DROP PRIMARY KEY
and now yo can add the autoincrement ...
ALTER TABLE nametable ADD id INT NOT NULL AUTO_INCREMENT PRIMARY KEY
Well, you must first drop the auto_increment and primary key you have and then add yours, as follows:
-- drop auto_increment capability
alter table `users` modify column id INT NOT NULL;
-- in one line, drop primary key and rebuild one
alter table `users` drop primary key, add primary key(id);
-- re add the auto_increment capability, last value is remembered
alter table `users` modify column id INT NOT NULL AUTO_INCREMENT;
If you run the following command :
ALTER TABLE users ADD id int NOT NULL AUTO_INCREMENT PRIMARY KEY;
This will show you the error :
ERROR 1060 (42S21): Duplicate column name 'id'
This is because this command will try to add the new column named id to the existing table.
To modify the existing column you have to use the following command :
ALTER TABLE users MODIFY id int NOT NULL AUTO_INCREMENT PRIMARY KEY;
This should work for changing the existing column constraint....!
Delete the primary key of a table if it exists:
ALTER TABLE `tableName` DROP PRIMARY KEY;
Adding an auto-increment column to a table :
ALTER TABLE `tableName` ADD `Column_name` INT PRIMARY KEY AUTO_INCREMENT;
Modify the column which we want to consider as the primary key:
alter table `tableName` modify column `Column_name` INT NOT NULL AUTO_INCREMENT PRIMARY KEY;
Just change the ADD to MODIFY and it will works !
Replace
ALTER TABLE users ADD id int NOT NULL AUTO_INCREMENT
To
ALTER TABLE users MODIFY id int NOT NULL AUTO_INCREMENT;
Drop the primary index from the table:
ALTER TABLE `tableName` DROP INDEX `PRIMARY`;
Then add the id column (without a primary index). I have used a big int because I am going to have lots of data but INT(11) should work just as well:
ALTER TABLE `tableName` ADD COLUMN `id` BIGINT(11) NOT NULL FIRST;
Then modify the column with auto-increment (thanks php). It needs to be a primary key:
ALTER TABLE `tableName ` MODIFY COLUMN `id` BIGINT(11) UNSIGNED PRIMARY KEY AUTO_INCREMENT;
I have just tried this on a table of mine and it appears to have worked.
ALTER TABLE users CHANGE id int( 30 ) NOT NULL AUTO_INCREMENT
the integer parameter is based on my default sql setting
have a nice day
ALTER TABLE users ADD id int NOT NULL AUTO_INCREMENT primary key FIRST
For PostgreSQL you have to use SERIAL instead of auto_increment.
ALTER TABLE your_table_name ADD COLUMN id SERIAL NOT NULL PRIMARY KEY
ALTER TABLE `table` ADD `id` INT NOT NULL AUTO_INCREMENT unique
Try this. No need to drop your primary key.
This SQL request works for me :
ALTER TABLE users
CHANGE COLUMN `id` `id` INT(11) NOT NULL AUTO_INCREMENT ;
If you want to add an id with a primary key and identity:
ALTER TABLE user ADD id INT NOT NULL AUTO_INCREMENT FIRST , ADD PRIMARY KEY (id);
Check for already existing primary key with different column. If yes, drop the primary key using:
ALTER TABLE Table1
DROP CONSTRAINT PK_Table1_Col1
GO
and then write your query as it is.
Proceed like that :
Make a dump of your database first
Remove the primary key like that
ALTER TABLE yourtable DROP PRIMARY KEY
Add the new column like that
ALTER TABLE yourtable add column Id INT NOT NULL AUTO_INCREMENT FIRST, ADD primary KEY Id(Id)
The table will be looked and the AutoInc updated.
I have a pre-existing table, containing 'fname', 'lname', 'email', 'password' and 'ip'. But now I want an auto-increment column. However, when I enter:
ALTER TABLE users
ADD id int NOT NULL AUTO_INCREMENT
I get the following:
#1075 - Incorrect table definition; there can be only one auto column and it must be defined as a key
Any advice?:)
Try this
ALTER TABLE `users` ADD `id` INT NOT NULL AUTO_INCREMENT;
for an existing primary key
If you don't care whether the auto-id is used as PRIMARY KEY, you can just do
ALTER TABLE `myTable` ADD COLUMN `id` INT AUTO_INCREMENT UNIQUE FIRST;
I just did this and it worked a treat.
If you want to add AUTO_INCREMENT in an existing table, need to run following SQL command:
ALTER TABLE users ADD id int NOT NULL AUTO_INCREMENT primary key
First you have to remove the primary key of the table
ALTER TABLE nametable DROP PRIMARY KEY
and now yo can add the autoincrement ...
ALTER TABLE nametable ADD id INT NOT NULL AUTO_INCREMENT PRIMARY KEY
Well, you must first drop the auto_increment and primary key you have and then add yours, as follows:
-- drop auto_increment capability
alter table `users` modify column id INT NOT NULL;
-- in one line, drop primary key and rebuild one
alter table `users` drop primary key, add primary key(id);
-- re add the auto_increment capability, last value is remembered
alter table `users` modify column id INT NOT NULL AUTO_INCREMENT;
If you run the following command :
ALTER TABLE users ADD id int NOT NULL AUTO_INCREMENT PRIMARY KEY;
This will show you the error :
ERROR 1060 (42S21): Duplicate column name 'id'
This is because this command will try to add the new column named id to the existing table.
To modify the existing column you have to use the following command :
ALTER TABLE users MODIFY id int NOT NULL AUTO_INCREMENT PRIMARY KEY;
This should work for changing the existing column constraint....!
Delete the primary key of a table if it exists:
ALTER TABLE `tableName` DROP PRIMARY KEY;
Adding an auto-increment column to a table :
ALTER TABLE `tableName` ADD `Column_name` INT PRIMARY KEY AUTO_INCREMENT;
Modify the column which we want to consider as the primary key:
alter table `tableName` modify column `Column_name` INT NOT NULL AUTO_INCREMENT PRIMARY KEY;
Just change the ADD to MODIFY and it will works !
Replace
ALTER TABLE users ADD id int NOT NULL AUTO_INCREMENT
To
ALTER TABLE users MODIFY id int NOT NULL AUTO_INCREMENT;
Drop the primary index from the table:
ALTER TABLE `tableName` DROP INDEX `PRIMARY`;
Then add the id column (without a primary index). I have used a big int because I am going to have lots of data but INT(11) should work just as well:
ALTER TABLE `tableName` ADD COLUMN `id` BIGINT(11) NOT NULL FIRST;
Then modify the column with auto-increment (thanks php). It needs to be a primary key:
ALTER TABLE `tableName ` MODIFY COLUMN `id` BIGINT(11) UNSIGNED PRIMARY KEY AUTO_INCREMENT;
I have just tried this on a table of mine and it appears to have worked.
ALTER TABLE users CHANGE id int( 30 ) NOT NULL AUTO_INCREMENT
the integer parameter is based on my default sql setting
have a nice day
ALTER TABLE users ADD id int NOT NULL AUTO_INCREMENT primary key FIRST
For PostgreSQL you have to use SERIAL instead of auto_increment.
ALTER TABLE your_table_name ADD COLUMN id SERIAL NOT NULL PRIMARY KEY
ALTER TABLE `table` ADD `id` INT NOT NULL AUTO_INCREMENT unique
Try this. No need to drop your primary key.
This SQL request works for me :
ALTER TABLE users
CHANGE COLUMN `id` `id` INT(11) NOT NULL AUTO_INCREMENT ;
If you want to add an id with a primary key and identity:
ALTER TABLE user ADD id INT NOT NULL AUTO_INCREMENT FIRST , ADD PRIMARY KEY (id);
Check for already existing primary key with different column. If yes, drop the primary key using:
ALTER TABLE Table1
DROP CONSTRAINT PK_Table1_Col1
GO
and then write your query as it is.
Proceed like that :
Make a dump of your database first
Remove the primary key like that
ALTER TABLE yourtable DROP PRIMARY KEY
Add the new column like that
ALTER TABLE yourtable add column Id INT NOT NULL AUTO_INCREMENT FIRST, ADD primary KEY Id(Id)
The table will be looked and the AutoInc updated.
how to set particular column as primary key with auto increment in mysql.am using alter statement . but am getting error when i excecute the alter statement in mysql.
alter statement
---------------
ALTER TABLE tbl_travelplan add COLUMN TRREQNO id INT(11) NOT NULL AUTO_INCREMENT, ADD PRIMARY KEY (id);
I think the real problem is the space between TRREQNO and id in your query.
Try the query i have placed below:
ALTER TABLE tbl_travelplan add TRREQNO_id INT(11) NOT NULL primary KEY AUTO_INCREMENT;
You need to DROP THE PRIMARY KEY FIRST:
Try this ::
ALTER TABLE tbl_travelplan add TRREQNO_id INT(11) NOT NULL AUTO_INCREMENT, DROP PRIMARY KEY,PRIMARY KEY;
ALTER TABLE tbl_travelplan add TRREQNO_id INT(11) NOT NULL AUTO_INCREMENT PRIMARY KEY;
You have to drop the existing index first using
DROP_INDEX [your_existing_index] ON tbl_travelplan
You can use this query
alter table tbl_travelplan
add TRREQNO_id int(11) NOT NULL AUTO_INCREMET PRIMARY KEY
I think in that table already having primary key. So only these kind of error came.
Please remove the primary key and run your query.
Please run this query
ALTER TABLE `table_name` add TRREQNO id INT(11) NOT NULL AUTO_INCREMENT DROP PRIMARY KEY ,
ADD PRIMARY KEY ( `id` )
I am trying to alter a table which has no primary key nor auto_increment column. I know how to add an primary key column but I was wondering if it's possible to insert data into the primary key column automatically (I already have 500 rows in DB and want to give them id but I don't want to do it manually). Any thoughts? Thanks a lot.
An ALTER TABLE statement adding the PRIMARY KEY column works correctly in my testing:
ALTER TABLE tbl ADD id INT PRIMARY KEY AUTO_INCREMENT;
On a temporary table created for testing purposes, the above statement created the AUTO_INCREMENT id column and inserted auto-increment values for each existing row in the table, starting with 1.
suppose you don't have column for auto increment like id, no, then you can add using following query:
ALTER TABLE table_name ADD id int NOT NULL AUTO_INCREMENT primary key FIRST
If you've column, then alter to auto increment using following query:
ALTER TABLE table_name MODIFY column_name datatype(length) AUTO_INCREMENT PRIMARY KEY
For those like myself getting a Multiple primary key defined error try:
ALTER TABLE `myTable` ADD COLUMN `id` INT AUTO_INCREMENT UNIQUE FIRST NOT NULL;
On MySQL v5.5.31 this set the id column as the primary key for me and populated each row with an incrementing value.
In order to make the existing primary key as auto_increment, you may use:
ALTER TABLE table_name MODIFY id INT AUTO_INCREMENT;
Yes, something like this would do it, it might not be the best though. You might wanna make a backup:
$get_query = mysql_query("SELECT `any_field` FROM `your_table`");
$auto_increment_id = 1;
while($row = mysql_fetch_assoc($get_query))
{
$update_query = mysql_query("UPDATE `your_table` SET `auto_increment_id`=$auto_increment_id WHERE `any_field` = '".$row['any_field']."'");
$auto_increment_id++;
}
Notice that the the any_field you select must be the same when updating.
The easiest and quickest I find is this
ALTER TABLE mydb.mytable
ADD COLUMN mycolumnname INT NOT NULL AUTO_INCREMENT AFTER updated,
ADD UNIQUE INDEX mycolumnname_UNIQUE (mycolumname ASC);
I was able to adapt these instructions take a table with an existing non-increment primary key, and add an incrementing primary key to the table and create a new composite primary key with both the old and new keys as a composite primary key using the following code:
DROP TABLE IF EXISTS SAKAI_USER_ID_MAP;
CREATE TABLE SAKAI_USER_ID_MAP (
USER_ID VARCHAR (99) NOT NULL,
EID VARCHAR (255) NOT NULL,
PRIMARY KEY (USER_ID)
);
INSERT INTO SAKAI_USER_ID_MAP VALUES ('admin', 'admin');
INSERT INTO SAKAI_USER_ID_MAP VALUES ('postmaster', 'postmaster');
ALTER TABLE SAKAI_USER_ID_MAP
DROP PRIMARY KEY,
ADD _USER_ID INT AUTO_INCREMENT NOT NULL FIRST,
ADD PRIMARY KEY ( _USER_ID, USER_ID );
When this is done, the _USER_ID field exists and has all number values for the primary key exactly as you would expect. With the "DROP TABLE" at the top, you can run this over and over to experiment with variations.
What I have not been able to get working is the situation where there are incoming FOREIGN KEYs that already point at the USER_ID field. I get this message when I try to do a more complex example with an incoming foreign key from another table.
#1025 - Error on rename of './zap/#sql-da07_6d' to './zap/SAKAI_USER_ID_MAP' (errno: 150)
I am guessing that I need to tear down all foreign keys before doing the ALTER table and then rebuild them afterwards. But for now I wanted to share this solution to a more challenging version of the original question in case others ran into this situation.
Export your table, then empty your table, then add field as unique INT, then change it to AUTO_INCREMENT, then import your table again that you exported previously.
You can add a new Primary Key column to an existing table, which can have sequence numbers, using command:
ALTER TABLE mydb.mytable ADD pk_columnName INT IDENTITY
I was facing the same problem so what I did I dropped the field for the primary key then I recreated it and made sure that it is auto incremental . That worked for me . I hope it helps others
ALTER TABLE tableName MODIFY tableNameID MEDIUMINT NOT NULL AUTO_INCREMENT;
Here tableName is name of your table,
tableName is your column name which is primary has to be modified
MEDIUMINT is a data type of your existing primary key
AUTO_INCREMENT you have to add just auto_increment after not null
It will make that primary key auto_increment......
Hope this is helpful:)
Well, you have multiple ways to do this:
-if you don't have any data on your table, just drop it and create it again.
Dropping the existing field and creating it again like this
ALTER TABLE test DROP PRIMARY KEY, DROP test_id, ADD test_id int AUTO_INCREMENT NOT NULL FIRST, ADD PRIMARY KEY (test_id);
Or just modify it
ALTER TABLE test MODIFY test_id INT AUTO_INCREMENT NOT NULL, ADD PRIMARY KEY (test_id);
How to write PHP to ALTER the already existing field (name, in this example) to make it a primary key? W/o, of course, adding any additional 'id' fields to the table..
This a table currently created - Number of Records found: 4 name VARCHAR(20) YES
breed VARCHAR(30) YES
color VARCHAR(20) YES
weight SMALLINT(7) YES
This an end result sought (TABLE DESCRIPTION) -
Number of records found: 4
name VARCHAR(20) NO PRI
breed VARCHAR(30) YES
color VARCHAR(20) YES
weight SMALLINT(7) YES
Instead of getting this -
Number of Records found: 5
id int(11) NO PRI
name VARCHAR(20) YES
breed VARCHAR(30) YES
color VARCHAR(20) YES
weight SMALLINT(7) YES
after trying..
$query = "ALTER TABLE racehorses ADD id INT NOT NULL AUTO_INCREMENT FIRST, ADD PRIMARY KEY (id)";
how to get this? -
Number of records found: 4
name VARCHAR(20) NO PRI
breed VARCHAR(30) YES
color VARCHAR(20) YES
weight SMALLINT(7) YES
i.e. INSERT/ADD.. etc. the primary key INTO the first field record (w/o adding an additional 'id' field, as stated earlier.
No existing primary key
ALTER TABLE `db`.`table`
ADD COLUMN `id` INT NOT NULL AUTO_INCREMENT FIRST,
ADD PRIMARY KEY (`id`);
;
Table already has an existing primary key'd column
(it will not delete the old primary key column)
ALTER TABLE `db`.`table`
ADD COLUMN `id` INT NOT NULL AUTO_INCREMENT FIRST,
CHANGE COLUMN `prev_column` `prev_column` VARCHAR(2000) NULL ,
DROP PRIMARY KEY,
ADD PRIMARY KEY (`id`);
;
Note: column must be first for auto increment which is why the FIRST command.
I created a table in MySQL with on column itemID.
After creating the table, now I want to change this column to AUTOINCREMENT.
How can this be done using ALTER statements?
Table definition:
ALLITEMS (itemid int(10) unsigned, itemname varchar(50))
I am using the following code but it is throwing a syntax error
Error: syntax incorrect.
ALTER TABLE allitems
MODIFY itemid INT(10) UNSIGNED AUTOINCREMENT;
CREATE TABLE ALLITEMS(
itemid INT(10)UNSIGNED,
itemname VARCHAR(50)
);
ALTER TABLE ALLITEMS CHANGE itemid itemid INT(10)AUTO_INCREMENT PRIMARY KEY;
DESC ALLITEMS;
INSERT INTO ALLITEMS(itemname)
VALUES
('Apple'),
('Orange'),
('Banana');
SELECT
*
FROM
ALLITEMS;
I was confused with CHANGE and MODIFY keywords before too:
ALTER TABLE ALLITEMS CHANGE itemid itemid INT(10)AUTO_INCREMENT PRIMARY KEY;
ALTER TABLE ALLITEMS MODIFY itemid INT(5);
While we are there, also note that AUTO_INCREMENT can also start with a predefined number:
ALTER TABLE tbl AUTO_INCREMENT = 100;
The syntax:
ALTER TABLE `table1` CHANGE `itemId` `itemId` INT( 11 ) NOT NULL AUTO_INCREMENT
But the table needs a defined key (ex primary key on itemId).
ALTER TABLE `ALLITEMS`
CHANGE COLUMN `itemid` `itemid` INT(10) UNSIGNED NOT NULL AUTO_INCREMENT;
Basic syntax for adding an AUTO_INCREMENT PRIMARY KEY to the OP's existing table:
ALTER TABLE allitems
MODIFY itemid INT(10) UNSIGNED AUTO_INCREMENT PRIMARY KEY;
Or for a new table, here's the syntax example from the docs:
CREATE TABLE animals (
id MEDIUMINT NOT NULL AUTO_INCREMENT,
name CHAR(30) NOT NULL,
PRIMARY KEY (id)
);
Traps and things to note:
An AUTO_INCREMENT column must have an index on it. (Usually, you'll want it to be the PRIMARY KEY, but MySQL does not require this.)
It's usually a good idea to make your AUTO_INCREMENT columns UNSIGNED. From the docs:
Use the UNSIGNED attribute if possible to allow a greater range.
When using a CHANGE or MODIFY clause to make a column AUTO_INCREMENT (or indeed whenever you use a CHANGE or MODIFY clause) you should be careful to include all modifiers for the column, like NOT NULL or UNSIGNED, that show up in the table definition when you call SHOW CREATE TABLE yourtable. These modifiers will be lost otherwise.
ALTER TABLE allitems
CHANGE itemid itemid INT(10) AUTO_INCREMENT;
ALTER TABLE tblcatalog
CHANGE COLUMN id id INT(11) NOT NULL AUTO_INCREMENT FIRST;
ALTER TABLE employees CHANGE id id int AUTO_INCREMENT PRIMARY KEY;
ALTER TABLE t_name modify c_name INT(10) AUTO_INCREMENT PRIMARY KEY;