I am trying this cod but ist showing type mismatch.
Option Explicit
Sub nse5()
Dim req As New MSXML2.XMLHTTP60
Dim url As String
Dim json As Object
url = "https://www.nseindia.com/api/option-chain-indices?symbol=NIFTY"
With req
.Open "GET", url, False
.send
Set json = JsonConverter.ParseJson(.responseText)
End With
Debug.Print json("filtered")("data")(1)(2)("openInterest")
End Sub
I have tryed many ways but i am suffring from it that hou to bring specific data to print
Related
I am trying to extract data from an API JSON response. Everywhere I read says to use JsonConverter.ParseJson and then you can use the data by doing something like Debug.Print jsonObject("name").
I get a 424 error.
Sub get_request_expansions()
Dim ws As Worksheet
Dim jsonObject As Object
Dim sURL As String
Set request = CreateObject("winhttp.winhttprequest.5.1")
sURL = "https://api.scryfall.com/sets/jmp/"
request.Open "GET", sURL, False
request.send
'----------
Debug.Print request.responseText
Set jsonObject = JsonConverter.ParseJson(request.responseText)
Debug.Print jsonObject("name")
'----------
request.abort
End Sub
Public Sub IMPORTMESTER()
Dim xTOK As String
Dim URL As String
Dim httpREQ As Object
Dim JSON As Object
Dim xLINE As Variant
xTOK = "bdj62bzknriy3dd9g561on2xl2"
URL = "https://api.smartsheet.com/2.0/sheets/7352150637471620"
Set httpREQ = CreateObject("MSXML2.XMLHTTP.6.0")
With httpREQ
.Open "GET", URL, False
.setRequestHeader "Authorization", "Bearer " & xTOK
.setRequestHeader "Content-Type", "application/json"
.Send
End With
xLINE = httpREQ.ResponseText
MsgBox ("Complete!")
End Sub
So, Ive returned data I need, but I tried several methods to parse it and paste in excel, but without success. Here is the part of responsetext:
"cells":[{"columnId":2400415921792900,"value":"MWP08","displayValue":"MWP08"},{"columnId":6904015549163396,"value":"A-WP-80301D5D10C00","displayValue":"A-WP-80301D5D10C00"},{"columnId":1274516014950276,"value":"MWP0830W27V50KD","displayValue":"MWP0830W27V50KD"},{"columnId":5778115642320772,"value":"WP08 30W,120-277VAC,Ra70 5000K Clear lens,Dark bronze","displayValue":"WP08 30W,120-277VAC,Ra70 5000K Clear lens,Dark bronze"},{"columnId":3526315828635524,"value":"image002.png","displayValue":"image002.png","formula":"=SYS_CELLIMAGE(\"image002.png\",\"vDOY-InMRamvhitNGotKzb\",35,52,\"image.png\")","image":{"id":"vDOY-InMRamvhitNGotKzb","height":35,"width":52,"altText":"image002.png"}},{"columnId":8029915456006020},{"columnId":711566061528964,"value":1884.0,"displayValue":"1884","linkInFromCell":{"status":"INACCESSIBLE","sheetId":4533800614029188,"rowId":null,"columnId":null,"sheetName":"MLC-Inventory扣减(2019)"}},{"columnId":2963365875214212,"value":"https://mesterleds.com/wp-content/uploads/2017/12/WP01-45W70W.png","displayValue":"https://mesterleds.com/wp-content/uploads/2017/12/WP01-45W70W.png"},{"columnId":7466965502584708},{"columnId":1837465968371588},{"columnId":6341065595742084},{"columnId":4089265782056836},{"columnId":8592865409427332},{"columnId":430091084818308,"value":175.0,"displayValue":"175"},{"columnId":4933690712188804},{"columnId":2681890898503556},{"columnId":7185490525874052},{"columnId":1555990991660932},{"columnId":6059590619031428}]},{"id":7080298036914052,"rowNumber":3,"siblingId":2576698409543556,"expanded":true,"createdAt":"2019-01-31T00:06:35Z","modifiedAt":"2019-02-18T16:56:50Z",
Each row of table I need starts with:"cells';[{" while I only need "displayValue": for columns!
I tried several solutions and suggestions from various threads from StackOverflow but... no luck!
Below is desired output:
Final excel format (unneccessary columns hidden)
If only after displayValue you can use the following with jsonconverter.bas. You add the .bas to your project and then VBE > Tools > References> Add a reference to Microsoft Scripting Runtime.
Option Explicit
Public Sub IMPORTMESTER()
Dim xTOK As String
Dim URL As String
Dim httpREQ As Object
Dim json As Object
Dim xLINE As Variant
xTOK = "token"
URL = "https://api.smartsheet.com/2.0/sheets/7352150637471620"
Set httpREQ = CreateObject("MSXML2.XMLHTTP.6.0")
With httpREQ
.Open "GET", URL, False
.setRequestHeader "Authorization", "Bearer " & xTOK
.setRequestHeader "Content-Type", "application/json"
.send
End With
xLINE = httpREQ.responseText
Set json = JsonConverter.ParseJson(xLINE)("rows")
Dim item As Object, nextitem As Object, i As Long
For Each item In json
For Each nextitem In item("cells")
i = i + 1
ActiveSheet.Cells(i, 1) = nextitem("displayValue")
Next
Next
End Sub
The item you want is nested within the json where {} is a dictionary, and [] is a collection.
I make a request to a website and paste the JSON response into a single cell.
I get an object required 424 error.
Sub GetJSON()
Dim hReq As Object
Dim JSON As Dictionary
Dim var As Variant
Dim ws As Worksheet
Set ws = Title
'create our URL string and pass the user entered information to it
Dim strUrl As String
strUrl = Range("M24").Value
Set hReq = CreateObject("MSXML2.XMLHTTP")
With hReq
.Open "GET", strUrl, False
.Send
End With
'wrap the response in a JSON root tag "data" to count returned objects
Dim response As String
response = "{""data"":" & hReq.responseText & "}"
Set JSON = JsonConverter.ParseJson(response)
'set array size to accept all returned objects
ReDim var(JSON("data").Count, 1)
Cells(25, 13) = JSON
Erase var
Set var = Nothing
Set hReq = Nothing
Set JSON = Nothing
End Sub
The URL that gives me the response in cell "M24":
https://earthquake.usgs.gov/ws/designmaps/asce7-10.json?latitude=36.497452&longitude=-86.949479&riskCategory=III&siteClass=C&title=Seismic
The code after Qharr's response. I get a run time 0 error even though the error says it ran successfully. Nothing is copied to my cells.
Public Sub GetInfo()
Dim URL As String, json As Object
Dim dict As Object
URL = "https://earthquake.usgs.gov/ws/designmaps/asce7-10.json?latitude=36.497452&longitude=-86.949479&riskCategory=III&siteClass=C&title=Seismic"
With CreateObject("MSXML2.XMLHTTP")
.Open "GET", URL, False
.Send
Set json = JsonConverter.ParseJson(.responseText) '<== dictionary
ThisWorkbook.Worksheets("Title").Cells(1, 1) = .responseText
Set dict = json("response")("data")
ws.Cells(13, 27) = "ss: " & dict("ss") & Chr$(10) & "s1: " & dict("s1")
End With
End Sub
I'm not clear what you mean. The entire response can go in a cell as follows.
JSON is an object so you would need Set keyword but you can't set a cell range to the dictionary object - the source of your error.
Option Explicit
Public Sub GetInfo()
Dim URL As String, json As Object
URL = "https://earthquake.usgs.gov/ws/designmaps/asce7-10.json?latitude=36.497452&longitude=-86.949479&riskCategory=III&siteClass=C&title=Seismic"
With CreateObject("MSXML2.XMLHTTP")
.Open "GET", URL, False
.send
Set json = JsonConverter.ParseJson(.responseText) '<== dictionary
ThisWorkbook.Worksheets("Sheet1").Cells(1, 1) = .responseText
End With
End Sub
When you use parsejson you are converting to a dictionary object which you need to do something with. There is simply too much data nested inside to write anything readable (if limit not exceeded) into one cell.
Inner dictionary data quickly descends into nested collections. The nested collection count comes from
Dim dict As Object
Set dict = json("response")("data")
Debug.Print "nested collection count = " & dict("sdSpectrum").Count + dict("smSpectrum").Count
To get just s1 and ss values parse them out:
Dim dict As Object
Set dict = json("response")("data")
ws.Cells(1, 2) = "ss: " & dict("ss") & Chr$(10) & "s1: " & dict("s1")
I have figured out the solution to pasting the response text with Excel 2003. Below is my finished code.
Public Sub datagrab()
Dim URL As String
Dim ws As Object
Dim xmlhttp As New MSXML2.XMLHTTP60
URL = Range("M24").Value 'This is the URL I'm requesting from
xmlhttp.Open "GET", URL, False
xmlhttp.Send
Worksheets("Title").Range("M25").Value = xmlhttp.responseText
End Sub
Can someone with experience using JSON and Access together tell me what I'm doing wrong with this code? I'm trying to parse a JSON file and there's one nested data item that I can't seem to extract. The problem portion of the JSON data is as follows:
credits":{
"director":[{"displayName":"Bradley Cooper","firstName":"Bradley","lastName":"Cooper","bio":""}],
"cast":["Bradley Cooper"," Lady Gaga"," Andrew Dice Clay"," Dave Chappelle"," Sam Elliott"]
}
I can extract the cast names with no problem, but I can't retrieve the "displayname" for the director. The nested "{}" brackets inside the "director" item are throwing me off. Here's my code:
Sub JSON_prob_demo()
Dim url As String, data As String
Dim xml As Object, JSON As Object, colObj As Object, colobj2 As Object, colObj3 As Object, item As Object
Dim c1 As Variant, varX As Variant
url = "https://www.tiff.net/data/films/a-star-is-born.json"
Set xml = CreateObject("MSXML2.XMLHTTP")
With xml
.Open "GET", url, False
.send
data = .responseText
End With
Set JSON = JsonConverter.ParseJson(data)
Set colObj = JSON("credits")
For Each c1 In colObj("cast")
Debug.Print c1
Next
Debug.Print "Director:"
Set colobj2 = colObj("director")
For Each c1 In colobj2
Debug.Print c1("displayname")
Next
End Sub
I've been able to extract the names of the four director fields, but I simply cannot access their values. What's the trick?
Try this
Sub getHTTP()
Dim Url As String, data As String
Dim xml As Object, JSON As Object, colObj, item
Url = "https://www.tiff.net/data/films/a-star-is-born.json"
Set xml = CreateObject("MSXML2.ServerXMLHTTP")
With xml
.Open "GET", Url, False
.send
data = .responseText
End With
Set JSON = JsonConverter.ParseJson(data)
Set colObj = JSON("credits")("director")
For Each item In colObj
For j = 0 To item.Count - 1
Debug.Print item.Items()(j)
Next
Next
End Sub
Print
Note: Item is dictionary object so used Debug.Print item.Items()(j) to retrieve key values.
I was trying to get some information from a JSON API and everything was going OK. So I started to get mismatch errors when I try to parse values that are inside the “root” of the JSON.
The code I use is below:
Public Sub Times()
Dim http As Object, JSON As Object, i As Integer
Set http = CreateObject("MSXML2.XMLHTTP")
http.Open "GET", "https://api.cartolafc.globo.com/time/id/1084847/7", False
http.Send
Set JSON = ParseJson(http.responseText)
i = 2
Application.ScreenUpdating = False
Sheets("Youtube").Select
For Each Item In JSON
Sheets("Mais Escalados").Cells(i, 2).value = Item("pontos")
i = i + 1
Next
Application.ScreenUpdating = True
MsgBox ("Atualização Completa")
End Sub
I can parse the data inside atletas sub-items or any other header changing the code like this:
Sheets("Mais Escalados").Cells(i, 2).value = Item("atletas")("nome")
But when I try to parse information like pontos on the root I get the mismatch error.
This will give you the root value for the key "pontos":
JSON("pontos")
You can't loop over the root keys like you show in your posted code: you would need to check the type of each key's value before you try to write it to the sheet:
Public Sub Times()
Dim http As Object, JSON As Object, i As Integer, k
Set http = CreateObject("MSXML2.XMLHTTP")
http.Open "GET", "https://api.cartolafc.globo.com/time/id/1084847/7", False
http.Send
Set JSON = ParseJson(http.responseText)
For Each k In JSON
Debug.Print k, TypeName(JSON(k))
Next
End Sub
Output:
atletas Collection
clubes Dictionary
posicoes Dictionary
status Dictionary
capitao_id Double
time Dictionary
patrimonio Double
esquema_id Double
pontos Double
valor_time Double
rodada_atual Double