I just installed Zabbix 5.4 and i want to test 'scheduled reports' but i keep getting:
Report manager is disabled.
Here's the interface:
Since the feature is new i can't find a solution. so if someone is familiar please help me fix it and enable the report manager.
You need to enable report writer in server config.
In /etc/zabbix/zabbix_server.conf (assuming you are running Zabbix on a Linux machine) change the value of StartReportWriters to at least 1, then restart the server.
Edit
You also need to set WebServiceURL parameter in zabbix_server.conf. The URL should be in format <host>:<port>/report. Default port is 10053.
WebServiceURL=http://localhost:10053/report
/report path is mandatory and hardcoded, and so can not be changed.
Next, Frontend URL parameter must be set. Go to Administration → General → Other parameters, and specify the full URL of the Zabbix web interface in the Frontend URL parameter.
More detailed instructions can be found in official documentation.
Related
I'm working on integrating a report into a browser, and I get this error:
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'dsFederatedSample_SurveyLevel_STG'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Does this have to do with SQL vs Windows authentication?
First thing I would try is to get a bit more information on the error - that's a pretty generic message.
You could enable remote errors as per the error message and replicate the error for more information.
Or check the Report Server error logs to see what error was logged.
%programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles\
The next step would be to connect as the Data Source user to the database, run any code/stored procedures that the report is using with the same parameters you're using when running the report, and see if any errors occur. Make sure the account you are using has permission and that you have entered the name and password correctly in the Data Source.
In SQL Server 2008 in addition to the above two options you have a third option to make this setting through SQL Server Management Studio.
1.Start Management Studio and connect to Report Server Instance (make sure you select 'Reporting Services' server type).
2.Right click on the ReportServer and Select Properties
3.Click Advanced
4.In EnableRemoteErrors, select True.
5.Click OK.
I had the same issue "Cannot create a connection to data source...Login failed for user.." on Windows 8.1, SQL Server 2014 Developer Edition and Visual Studio 2013 Pro. All solutions offered above by other Stackoverflow Community members did not work for me.
So, I did the next steps (running all Windows applications as Administrator):
VS2013 SSRS: I converted my Data Source to Shared Data Source (.rds) with Windows Authentication (Integrated Security) on the Right Pane "Solution Explorer".
Original (non-shared) Data Source (on the Left Pane "Report Data") got "Don't Use Credentials".
On the Project Properties, I set for "Deployment" "Overwrite DataSources" to "True" and redeployed the Project.
After that, I could run my report without further requirements to enter Credentials. All Shared DataSources were deployed in a separate Directory "DataSources".
In my case, this was due to using Integrated Windows Authentication in my data sources while developing reports locally, however once they made it to the report manager, the authentication was broke because the site wasn't properly passing along my credentials.
The simple fix is to hardcode a username/password into your datasource.
The harder fix is to properly impersonate/delegate your windows credentials through the report manager, to the underlying datasource.
The issue is because your data source is not setup properly, to do that please verify your data source connection, in order to do that first navigate to Report Service Configuration Manager through
clicking on the start -> Start All -> Microsoft SQL Server ->Configuration Tool -> “Report Service Configuration Manager”
The open Report Manager URL and then navigate to the Data Source folder, see in the picture below
Then Create a Data Source or configure the one that is already there by right click on your database source and select "Manage" as is shown below
Now on the properties tab, on your left menu, fill out the data source with your connection string and username and password, after that click on test connection, and if the connection was successful, then click "Apply"
Navigate to the folder that contains your report in this case "SurveyLevelReport"
And Finally set your Report to the Data Source that you set up previously, and click Apply
if you use null values in your stored procedure, you will need to set the parameters to accept null values. That worked for me.
In my case I had in one report many different datasets to DB and Analysis Services Cube. Looks like that datasets blocked each other and generated such error.
For me helped option "Use single transaction when processing the queries" in the CUBE datasource properties
I had a similar problem, and being the newbie that I am it took me a while to figure out but I learned the user must have a login in SSMS. I created the logins with the following parameters:
Under Server Roles - check sysadmin
Under User Mapping - I selected the database and the report server. For each I checked datareader and datawriter
Under Securables - I checked anything that would allow the user to connect to the database and view anything
I also found that one of the existing logins had denydatareader and denydatawriter checked. Once I removed these it worked.
I'm not saying this is the best way to do it, just what worked for me. Hope this helps
More information will be useful.
When I was faced with the same error message all I had to do was to correctly configure the credentials page of the DataSource(I am using Report Builder 3). if you chose the default, the report would work fine in Report Builder but would fail on the Report Server.
You may review more details of this fix here:
https://hodentekmsss.blogspot.com/2017/05/fix-for-rserroropeningconnection-in.html
I had the exact same issue.
The cause could be different but in my case, after trying several different things like changing the connection string on the Data Source setup, I found that this was the infamous 'double hop' issue (more info here).
To solve the problem, the following two options are available (as per one of the responses from the hyperlink):
Change the Report Server service to run under a domain user account, and register a SPN for the account.
Map Built-in accounts HTTP SPN to a Host SPN.
Using option 1, you need to select 'Windows' credentials instead of database credentials to overcome the double hop that happens while authentication.
I wish I upload a file from PhpStorm in my host, but Tools -> Deployment -> default server configuration is disabled.
My PhpStorm version is 10.0,
Before the question, I have read this page:
https://www.jetbrains.com/help/phpstorm/10.0/uploading-and-downloading-files.html
If I understand your question correctly, for you specific request you need to set up a default server configuration.
Your current account does not have an associated remote server, so you can either goto File > settings > deployment > and Setup a server n this screen, or if you've already got a server, then you can select that server on this screen and click the "Make default" icon above the server list.
Alternatively you don't need a default server and instead use Tools > deployment > Upload to... and select one of your predefined servers associated with this account.
The underlaying point here is that you need to tell PhpStorm your server details (from the deployment menu mentioned above) before it can connect to your server.
I have created a Report Server Project in Visual Studio 2013. The actual report server was a pre-existing server whose reports were previously populated via the Report Builder tool. I have downloaded the .RDL files locally and added them to the project under the /Reports folder.
When I try to deploy the reports I am receiving the 'TargetServerURL' is not valid error. I have researched the answers here and here.
I can successfully navigate to http:///Reports_PRODUCTION which displays the reports, and also to http:///ReportServer_PRODUCTION which offers an FTP-view of the report structure.
In the project properties I have set the 'TargetServerURL' to both of these URLs and neither has worked. I've verified that the target server version is correctly set - SQL Server 2008 R2. Am I missing something?
Thanks
I found out something, so that's why I post to this old question.
I had the same problems after starting a new VS2013 SSRS project and tried to deploy to the same RS server, but to a different server.
I kept getting the error: The specified TargetServerURL is not valid. Specify a valid URL for report server in the deployment settings.
After quadruple checking everything,I found that I was changing the ssrs project property on Release mode but in VS 2013 I was deploying the project in Debug mode. After changing the VS 2013 configuration to run as Release it found the right ssrs project settings and deployed fine on first run.
I read these answers and looked in my Configuration Manager (Right click project name > Properties > Configuration Manager > and picked the Server that was configured. It shows up checked like the image. I had been uploading with correct info, just didn't have the configuration fully done on my new project which used files and locations from older project:
Screenshot of Configuration Manager and Settings
I would start by looking at what SSRS thinks the service endpoint is and I bet that is the one you should be using.
Open the Sql Server 20XX Reporting Service Configuration Manager.
NOTE : This is found under the Sql Server progam group and maybe in a subfolder.
Select the service instance you want to connect to and click Connect
Navigate to the "Web Service Url" Tree List View Item in the list on the left hand side of the window.
Note the URLs: value in the "Report Server Web Service URLs" group box at the bottom of the Web Service URL panel. (This is the url you should use to connect with)
NOTE : If this is on a remote server then you will need to http or https to the domain in place of localhost or machine name if that is how the Report service was set up. If you can not access https:\\MACHINENAME/SSRS from your local machine then simply replace the url with https:\\www.mymachinenameurl.com/SSRS
make sure your deployment settings for the configuration you are deploying from are set (deploying in debug, ensure you are referring to debug deployment settings)
trust me I've been there .. Allot
I reached here because I've had the same error, and I was not able to deploy my report .
Anyways, at some point I tried to deploy the report manually by uploading to the library that I've already prepared with the Reporting Content Types, but the datasource was appearing as unknown file types, and couldn't access Manage Data Sources of the report.
tried to run the report hopelessly and noticed the url
http://ServerName/PWA/_layouts/15/ReportServer/RSViewerPage.aspx?rv:RelativeReportUrl=/PWA/Reports%20Library/Weekly%20Status%20Report.rdl
I tried to use the url http://ServerName/PWA/_layouts/15/ReportServer as "TargetServerURL" and it worked
for the other properties like the Datasets, reports ... I used the following urls
Report: http://ServerName/PWA/Reports%20Library/
DataSets: http://ServerName/PWA/Reports%20Library/Datasets
datasource: http://ServerName/PWA/Reports%20Library/datasource
and this was the end of my suffer and was able to deploy correctly and manage every property of the report, datasets, and datasources
I'm working on integrating a report into a browser, and I get this error:
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'dsFederatedSample_SurveyLevel_STG'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Does this have to do with SQL vs Windows authentication?
First thing I would try is to get a bit more information on the error - that's a pretty generic message.
You could enable remote errors as per the error message and replicate the error for more information.
Or check the Report Server error logs to see what error was logged.
%programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles\
The next step would be to connect as the Data Source user to the database, run any code/stored procedures that the report is using with the same parameters you're using when running the report, and see if any errors occur. Make sure the account you are using has permission and that you have entered the name and password correctly in the Data Source.
In SQL Server 2008 in addition to the above two options you have a third option to make this setting through SQL Server Management Studio.
1.Start Management Studio and connect to Report Server Instance (make sure you select 'Reporting Services' server type).
2.Right click on the ReportServer and Select Properties
3.Click Advanced
4.In EnableRemoteErrors, select True.
5.Click OK.
I had the same issue "Cannot create a connection to data source...Login failed for user.." on Windows 8.1, SQL Server 2014 Developer Edition and Visual Studio 2013 Pro. All solutions offered above by other Stackoverflow Community members did not work for me.
So, I did the next steps (running all Windows applications as Administrator):
VS2013 SSRS: I converted my Data Source to Shared Data Source (.rds) with Windows Authentication (Integrated Security) on the Right Pane "Solution Explorer".
Original (non-shared) Data Source (on the Left Pane "Report Data") got "Don't Use Credentials".
On the Project Properties, I set for "Deployment" "Overwrite DataSources" to "True" and redeployed the Project.
After that, I could run my report without further requirements to enter Credentials. All Shared DataSources were deployed in a separate Directory "DataSources".
In my case, this was due to using Integrated Windows Authentication in my data sources while developing reports locally, however once they made it to the report manager, the authentication was broke because the site wasn't properly passing along my credentials.
The simple fix is to hardcode a username/password into your datasource.
The harder fix is to properly impersonate/delegate your windows credentials through the report manager, to the underlying datasource.
The issue is because your data source is not setup properly, to do that please verify your data source connection, in order to do that first navigate to Report Service Configuration Manager through
clicking on the start -> Start All -> Microsoft SQL Server ->Configuration Tool -> “Report Service Configuration Manager”
The open Report Manager URL and then navigate to the Data Source folder, see in the picture below
Then Create a Data Source or configure the one that is already there by right click on your database source and select "Manage" as is shown below
Now on the properties tab, on your left menu, fill out the data source with your connection string and username and password, after that click on test connection, and if the connection was successful, then click "Apply"
Navigate to the folder that contains your report in this case "SurveyLevelReport"
And Finally set your Report to the Data Source that you set up previously, and click Apply
if you use null values in your stored procedure, you will need to set the parameters to accept null values. That worked for me.
In my case I had in one report many different datasets to DB and Analysis Services Cube. Looks like that datasets blocked each other and generated such error.
For me helped option "Use single transaction when processing the queries" in the CUBE datasource properties
I had a similar problem, and being the newbie that I am it took me a while to figure out but I learned the user must have a login in SSMS. I created the logins with the following parameters:
Under Server Roles - check sysadmin
Under User Mapping - I selected the database and the report server. For each I checked datareader and datawriter
Under Securables - I checked anything that would allow the user to connect to the database and view anything
I also found that one of the existing logins had denydatareader and denydatawriter checked. Once I removed these it worked.
I'm not saying this is the best way to do it, just what worked for me. Hope this helps
More information will be useful.
When I was faced with the same error message all I had to do was to correctly configure the credentials page of the DataSource(I am using Report Builder 3). if you chose the default, the report would work fine in Report Builder but would fail on the Report Server.
You may review more details of this fix here:
https://hodentekmsss.blogspot.com/2017/05/fix-for-rserroropeningconnection-in.html
I had the exact same issue.
The cause could be different but in my case, after trying several different things like changing the connection string on the Data Source setup, I found that this was the infamous 'double hop' issue (more info here).
To solve the problem, the following two options are available (as per one of the responses from the hyperlink):
Change the Report Server service to run under a domain user account, and register a SPN for the account.
Map Built-in accounts HTTP SPN to a Host SPN.
Using option 1, you need to select 'Windows' credentials instead of database credentials to overcome the double hop that happens while authentication.
I'm trying to use MS Reporting Services. So far I have been able to create a simple report, using the AdventureWorks database.
Next step I wanted to take was to deploy my report. This is what I did:
In the Business Intelligence editor I right-clicked on the project name and clicked properties
I added a Start Item and I set the TargetServerURL to the URL that was displayed in the Reporting Services Configuration Manager. The URL is: http://ADMIN-PC:80/ReportServer
After that I clicked "OK" to go out of the Properties window. Then I hit Build Report Project1 in the Build menu.
After it tries to build it gives me the following error:
The specified report server URL: "http://admin-pc/ReportServer" could
not be found. Verify the syntax of the URL and that the report server
exists.
I'm sure the URL is correct. Or at least, that is what the Reporting Services Configuration Manager says.
So I have no clue what to check next in order to fix this problem. Anyone any idea what to do?
It's always tough to try and troubleshoot these general "it's not working" errors, but here's a rough idea of what I'd try looking at:
Is the service running? If you can connect through Reporting Services Configuration Manager then the answer is probably yes, but it's always the first thing to check!
Are the URLs correct? You may need to check you're using the correct URLs - these can be confirmed through Reporting Services Configuration Manager; by default Named Instances will have URLs like http://admin-pc/ReportServer_InstanceName and http://admin-pc/Reports_InstanceName.
Can I connect out of BIDS? What happens when you connect to http://admin-pc/ReportServer through Internet Explorer? What about http://admin-pc/Reports?
Are there permission issues? By default the only users that can access SSRS are those in the BUILTIN\Administrators group. Is your user in this group?
Is UAC mucking me up? As above, only Administrators will have default access, but if UAC is enabled you still won't connect as an admin even if you're in this group. Try running BIDS or Internet Explorer with Run As Administrator and see if it makes any difference.
Is the URL being registered successfully? The URLs won't work if the port is already in use, but Reporting Services Configuration Manager will quite happily allow you to set this without an error even if the port's in use; it's especially when using port 80.
Check the log file at Program Files\Microsoft SQL Server\<SSRSInstance>\Reporting Services\LogFiles; this will have an error logged if it can't register the URL on the port specified. If you see an error here try a different port.
Any other errors in the log? Failing this, check the log for any more errors.
Not much to go on, I admit, but maybe there's something you haven't looked at here. I'd saying stepping through these checks has solved 99% of the errors that I've seen in the past.