I want to draw four images on canvas as below.
However, I want to use only one image, not four.
(use only img0, not use img90/img180/img270)
In other words, I want to draw four images with different rotation directions with one image(img0) on canvas.
Is that possible?
var ctx = document.getElementById('canvas').getContext('2d')
var img0 = new Image()
img0.src = 'https://i.stack.imgur.com/0vxxK.png'
img0.addEventListener('load', function() {
ctx.drawImage(img0, 0, 0)
}, false);
var img90 = new Image()
img90.src = 'https://i.stack.imgur.com/9EgLn.png'
img90.addEventListener('load', function() {
ctx.drawImage(img90, 20, 0)
}, false);
var img180 = new Image()
img180.src = 'https://i.stack.imgur.com/Us9fa.png'
img180.addEventListener('load', function() {
ctx.drawImage(img180, 40, 0)
}, false);
var img270 = new Image()
img270.src = "https://i.stack.imgur.com/EO9f9.png"
img270.addEventListener('load', function() {
ctx.drawImage(img270, 60, 0)
}, false);
<canvas id="canvas" width="150" height="150"></canvas>
sample image degree 0
sample image degree 90
sample image degree 180
sample image degree 270
It is possible. You can use the ctx.rotate("degrees" * Math.PI / 180); function. Replace the "degrees" with the amount you'd like to rotate the image for.
I'm using the following script code to draw a video on canvas:
$("#vPlayer").on('play', function (e) {
var canvas = $('canvas')[0];
var ctx = canvas.getContext('2d');
var $this = this;
canvas.width = 640;
canvas.height = 480;
(function loop() {
if (!$this.paused && !$this.ended) {
ctx.drawImage($this, 0, 0, 640, 480);
setTimeout(loop, 1000 / 30); // drawing at 30fps
}
})();
});
The code works well, but in my case, I want to change the video source (src attribute) of the video tag every 2 mins. When I set the src attr for the video and during the loading time for the video, the canvas displays white screen. How can I preserve the last image of video and do not clear the canvas?
It is a little bit weird because, when I don't set the width and height for the canvas, the last frame is preserved, but I need to set the size.
Every time you set the size of the canvas it will be cleared.
To avoid this you need to set the size at the "beginning", before you start drawing to it. In this case I would recommend you set it outside your event handler as well as the initializing of the canvas and context variable:
var canvas = $('canvas')[0];
var ctx = canvas.getContext('2d');
canvas.width = 640;
canvas.height = 480;
$("#vPlayer").on('play', function (e) {
var $this = this;
(function loop() {
if (!$this.paused && !$this.ended) {
ctx.drawImage($this, 0, 0, 640, 480);
setTimeout(loop, 1000 / 30); // drawing at 30fps
}
})();
});
I am a very beginner web designer and I have two questions about this code.
<!DOCTYPE html>
<html>
<head>
<style type="text/css">
#canvas1{border: #666 3px solid;}
</style>
<script type="application/javascript" language="javascript">
function draw (x,y){
var canvas = document.getElementById('canvas1');
var ctx = canvas.getContext('2d');
ctx.save();
ctx.clearRect(0, 0, canvas.width, canvas.height);
ctx.fillstyle = "rgb (0,200, 0)";
ctx.fillRect(x, 20, 50, 50);
ctx.restore();
x += 5;
var loop = setTimeout('draw('+x+', '+y+')', 100);
}
</script>
</head>
<body>
<button onclick="draw(0,0)">Start</button>
<canvas id="canvas1" width="400" height="400"</canvas>
</body>
</html>
Why does the block always turn out black? and Why if I try to press start again, the clearRect function doesn’t work?
When you click start you are starting a new loop that runs parallel to the one already started and depending on which one executes first your canvas would be cleared and filled twice (or as many times you started the loop - the more the more pronounced the flicker will be).
You need a mechanism to prevent the loop from starting several times. One way is to use a flag. I would also suggest you refactor the code a bit separating the loop and the drawing:
Live demo here
/// put these outside, no need to re-allocate them each time
var canvas = document.getElementById('canvas1');
var ctx = canvas.getContext('2d');
var w = canvas.width;
var h = canvas.height;
var x = 0;
var isRunning = false;
/// all loop-related here:
function loop() {
/// call draw from inside the loop instead
draw(x, 0); /// you are never using y so I just set 0 here...
x += 5;
if (isRunning && x <= w) {
requestAnimationFrame(loop); /// this is a better alternative
//setTimeout(loop, 100); /// optionally, but not recommended
} else {
isRunning = false; /// box is outside visible area so we'll stop..
}
}
/// keep draw() "clean", no loop code in here:
function draw(x, y) {
/// no need for save/restore here...
ctx.clearRect(0, 0, w, h);
ctx.fillStyle = "rgb(0, 200, 0)";
ctx.fillRect(x, 20, 50, 50);
}
Your fillStyle was typed wrong, your rgb(... must be without space (as mentioned in the other answer - but it would only result in the fill style being black in this case), in addition you're missing a closing bracket for your canvas tag in the html.
To check for button clicks this is a more recommended way instead of inlining the JS in the html:
/// check for button clicks (start):
document.getElementById('start').addEventListener('click', function() {
if (!isRunning) { /// are we running? if not start loop
isRunning = true; /// set flag so we can prevent multiple clicks
x = 0; /// reset x
loop(); /// now we start the *loop*
}
}, false);
And in your html:
<button id="start">Start</button>
Now you can easily make a pause button:
<button id="stop">Stop</button>
and add this to the script:
document.getElementById('stop').addEventListener('click', function() {
isRunning = false;
}, false);
Because you need to use:
ctx.fillStyle = "rgb(0,200,0)";
with a capital 'S' and no space between 'rgb' and the opening bracket: http://jsfiddle.net/dtHjf/
Then, in terms of why pressing 'Start' multiple times causes the square to flicker, that's because each time you press it you're starting another animation loop, but without cancelling the old one, so that you've got multiple loops fighting with each other. If you make sure to cancel any pre-existing loop before you start a new one, you should be fine:
http://jsfiddle.net/dtHjf/2/
HTML:
<button id="startAnim">Start</button><br />
<canvas id="canvas1" width="400" height="400"></canvas>
JS:
var canvas = document.getElementById('canvas1'),
ctx = canvas.getContext('2d'),
loop;
function draw(x, y) {
ctx.save();
ctx.clearRect(0, 0, canvas.width, canvas.height);
ctx.fillStyle = "rgb(0,200,0)";
ctx.fillRect(x, 20, 50, 50);
ctx.restore();
x += 5;
loop = setTimeout(function(){draw(x,y)}, 100);
}
document.getElementById('startAnim').onclick = function(){
clearTimeout(loop);
draw(0,0);
};
Also, this is unrelated to your problem, but you might want to take a look at requestAnimationFrame:
https://developer.mozilla.org/en-US/docs/Web/API/window.requestAnimationFrame
http://www.paulirish.com/2011/requestanimationframe-for-smart-animating/
I have a flash animation I am trying to convert to HTML5. Now I have taken out all the images. For example in the hand animation, I have taken images of all hand images. I have made the canvas with the base drawing but I don't know how to replace those images frame by frame.
function draw(){
var canvas = document.getElementById('canvas');
if(canvas.getContext){
// canvas animation code here:
var ctx = canvas.getContext('2d');
var lhs = new Image();
lhs.src = "images/left_hnd_1.png";
lhs.onload = function(){
ctx.drawImage(lhs, 293, 137);
}
} else {
// canvas unsupported code here:
document.getElementById('girl').style.display = "block";
}
}
Now I have three more frame for this image. left_hnd_2.png, left_hnd_3.png & left_hnd_4.png. I would've used one image but the difference in frames is way too much for it to be done with one image. How can I animate this with the time differences I want.
Any ideas would be greatly appreciated. Thanks!
Try this:
var imgNumber = 1;
var lastImgNumber = 4;
var ctx = canvas.getContext('2d');
var img = new Image;
img.onload = function(){
ctx.clearRect( 0, 0, ctx.canvas.width, ctx.canvas.height );
ctx.drawImage( img, 0, 0 );
};
var timer = setInterval( function(){
if (imgNumber>lastImgNumber){
clearInterval( timer );
}else{
img.src = "images/left_hnd_"+( imgNumber++ )+".png";
}
}, 1000/15 ); //Draw at 15 frames per second
An alternative, if you only have 4 images, would be to create a single huge image with all four in a 'texture atlas', and then use setTimeout or setInterval to call drawImage() with different parameters to draw different subsets of the image to the canvas.
This worked for me as well! For some reason, it didn't work when I had used the OP's opening code: function draw(){
However when I used: window.onload = function draw() { the animation plays on the canvas. I'm also using about 150 PNG images with an Alpha channel so this is a great way to bring 'video' or create composites to the iPad/iPhone. I confirm that it does work on iPad iOS 4.3.
Is there a default way of drawing an SVG file onto a HTML5 canvas? Google Chrome supports loading the SVG as an image (and simply using drawImage), but the developer console does warn that resource interpreted as image but transferred with MIME type image/svg+xml.
I know that a possibility would be to convert the SVG to canvas commands (like in this question), but I'm hoping that's not needed. I don't care about older browsers (so if FireFox 4 and IE 9 will support something, that's good enough).
EDIT: Dec 2019
The Path2D() constructor is supported by all major browsers now, "allowing path objects to be declared on 2D canvas surfaces".
EDIT: Nov 2014
You can now use ctx.drawImage to draw HTMLImageElements that have a .svg source in some but not all browsers (75% coverage: Chrome, IE11, and Safari work, Firefox works with some bugs, but nightly has fixed them).
var img = new Image();
img.onload = function() {
ctx.drawImage(img, 0, 0);
}
img.src = "http://upload.wikimedia.org/wikipedia/commons/d/d2/Svg_example_square.svg";
Live example here. You should see a green square in the canvas. The second green square on the page is the same <svg> element inserted into the DOM for reference.
You can also use the new Path2D objects to draw SVG (string) paths. In other words, you can write:
var path = new Path2D('M 100,100 h 50 v 50 h 50');
ctx.stroke(path);
Live example of that here.
Original 2010 answer:
There's nothing native that allows you to natively use SVG paths in canvas. You must convert yourself or use a library to do it for you.
I'd suggest looking in to canvg: (check homepage & demos)
canvg takes the URL to an SVG file, or the text of the SVG file, parses it in JavaScript and renders the result on Canvas.
Further to #Matyas answer: if the svg's image is also in base64, it will be drawn to the output.
Demo:
var svg = document.querySelector('svg');
var img = document.querySelector('img');
var canvas = document.querySelector('canvas');
// get svg data
var xml = new XMLSerializer().serializeToString(svg);
// make it base64
var svg64 = btoa(xml);
var b64Start = 'data:image/svg+xml;base64,';
// prepend a "header"
var image64 = b64Start + svg64;
// set it as the source of the img element
img.onload = function() {
// draw the image onto the canvas
canvas.getContext('2d').drawImage(img, 0, 0);
}
img.src = image64;
svg, img, canvas {
display: block;
}
SVG
<svg height="40" width="40">
<rect width="40" height="40" style="fill:rgb(255,0,255);" />
<image xlink:href="data:image/png;base64,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" height="20px" width="20px" x="10" y="10"></image></svg><br/>
IMAGE
<img/><br/>
CANVAS
<canvas></canvas><br/>
You can easily draw simple svgs onto a canvas by:
Assigning the source of the svg to an image in base64 format
Drawing the image onto a canvas
Note: The only drawback of the method is that it cannot draw images embedded in the svg. (see demo)
Demonstration:
(Note that the embedded image is only visible in the svg)
var svg = document.querySelector('svg');
var img = document.querySelector('img');
var canvas = document.querySelector('canvas');
// get svg data
var xml = new XMLSerializer().serializeToString(svg);
// make it base64
var svg64 = btoa(xml);
var b64Start = 'data:image/svg+xml;base64,';
// prepend a "header"
var image64 = b64Start + svg64;
// set it as the source of the img element
img.src = image64;
// draw the image onto the canvas
canvas.getContext('2d').drawImage(img, 0, 0);
svg, img, canvas {
display: block;
}
SVG
<svg height="40">
<rect width="40" height="40" style="fill:rgb(255,0,255);" />
<image xlink:href="https://en.gravatar.com/userimage/16084558/1a38852cf33713b48da096c8dc72c338.png?size=20" height="20px" width="20px" x="10" y="10"></image>
</svg>
<hr/><br/>
IMAGE
<img/>
<hr/><br/>
CANVAS
<canvas></canvas>
<hr/><br/>
Mozilla has a simple way for drawing SVG on canvas called "Drawing DOM objects into a canvas"
As Simon says above, using drawImage shouldn't work. But, using the canvg library and:
var c = document.getElementById('canvas');
var ctx = c.getContext('2d');
ctx.drawSvg(SVG_XML_OR_PATH_TO_SVG, dx, dy, dw, dh);
This comes from the link Simon provides above, which has a number of other suggestions and points out that you want to either link to, or download canvg.js and rgbcolor.js. These allow you to manipulate and load an SVG, either via URL or using inline SVG code between svg tags, within JavaScript functions.
Something to add, to show the svg correctly in canvas element add the attributes height and width to svg root element, Eg:
<svg height="256" width="421">...</svg>
Or
// Use this if to add the attributes programmatically
const svg = document.querySelector("#your-svg");
svg.setAttribute("width", `${width}`);
svg.setAttribute("height", `${height}`);
For more details see this
As vector graphics are meant to be potentially scaled, I will offer a method I have made that is as similar to SVG as possible. This method supports:
A resizable canvas
Transparency
Hi-resolution graphics (automatically, but no pinch support yet)
Scaling of the SVG in both directions! (To do this with pixels, you will have to divide the new length by the old one)
This is done by converting the SVG to canvas functions here, then adding that to svgRed() (after changing the name of ctx to ctx2. The svgRed() function is used on startup and during pixel ratio changes (for example, increasing the zoom), but not before the canvas is scaled (in order to increase the size of the image). It converts the result into an Image, and can be called any time by ctx.drawImage(redBalloon, Math.round(Math.random() * w), Math.round(Math.random() * h)). To clear the screen, use ctx.clearRect(0, 0, w, h) to do so.
Testing this with the SVG, I found that this is many times faster, as long as the zoom is not set to large values (I discovered that a window.devicePixelRatio of 5 gives just over twice the speed as an SVG, and a window.devicePixelRatio of 1 is approximately 60 times faster).
This also has the bonus benefit of allowing many "fake SVG" items to exist simultaneously, without messing with the HTML (this is shown in the code below). If the screen is resized or scaled, you will need to render it again (completely ignored in my example).
The canvas showing the result is scaled down (in pixels) by the devicePixelRatio, so be careful when drawing items! Scaling (with ctx.scale() this canvas will result in a potentially blurry image, so be sure to account for the pixel difference!
NOTE: It seems that the browser takes a while to optimize the image after the devicePixelRatio has changed (around a second sometimes), so it may not be a good idea to spam the canvas with images immediately, as the example shows.
<!DOCTYPE html>
<html>
<head lang="en">
<title>Balloons</title>
<style>
* {
user-select: none;
-webkit-user-select: none;
}
body {
background-color: #303030;
}
</style>
</head>
<body>
<canvas id="canvas2" style="display: none" width="0" height="0"></canvas>
<canvas id="canvas"
style="position: absolute; top: 20px; left: 20px; background-color: #606060; border-radius: 25px;" width="0"
height="0"></canvas>
<script>
// disable pinches: hard to implement resizing
document.addEventListener("touchstart", function (e) {
if (e.touches.length > 1) {
e.preventDefault()
}
}, { passive: false })
document.addEventListener("touchmove", function (e) {
if (e.touches.length > 1) {
e.preventDefault()
}
}, { passive: false })
// disable trackpad zooming
document.addEventListener("wheel", e => {
if (e.ctrlKey) {
e.preventDefault()
}
}, {
passive: false
})
// This is the canvas that shows the result
const canvas = document.getElementById("canvas")
// This canvas is hidden and renders the balloon in the background
const canvas2 = document.getElementById("canvas2")
// Get contexts
const ctx = canvas.getContext("2d")
const ctx2 = canvas2.getContext("2d")
// Scale the graphic, if you want
const scaleX = 1
const scaleY = 1
// Set up parameters
var prevRatio, w, h, trueW, trueH, ratio, redBalloon
function draw() {
for (var i = 0; i < 1000; i++) {
ctx.drawImage(redBalloon, Math.round(Math.random() * w), Math.round(Math.random() * h))
}
requestAnimationFrame(draw)
}
// Updates graphics and canvas.
function updateSvg() {
var pW = trueW
var pH = trueH
trueW = window.innerWidth - 40
trueH = Math.max(window.innerHeight - 40, 0)
ratio = window.devicePixelRatio
w = trueW * ratio
h = trueH * ratio
if (trueW === 0 || trueH === 0) {
canvas.width = 0
canvas.height = 0
canvas.style.width = "0px"
canvas.style.height = "0px"
return
}
if (trueW !== pW || trueH !== pH || ratio !== prevRatio) {
canvas.width = w
canvas.height = h
canvas.style.width = trueW + "px"
canvas.style.height = trueH + "px"
if (prevRatio !== ratio) {
// Update graphic
redBalloon = svgRed()
// Set new ratio
prevRatio = ratio
}
}
}
window.onresize = updateSvg
updateSvg()
draw()
// The vector graphic (you may want to manually tweak the coordinates if they are slightly off (such as changing 25.240999999999997 to 25.241)
function svgRed() {
// Scale the hidden canvas
canvas2.width = Math.round(44 * ratio * scaleX)
canvas2.height = Math.round(65 * ratio * scaleY)
ctx2.scale(ratio * scaleX, ratio * scaleY)
// Draw the graphic
ctx2.save()
ctx2.beginPath()
ctx2.moveTo(0, 0)
ctx2.lineTo(44, 0)
ctx2.lineTo(44, 65)
ctx2.lineTo(0, 65)
ctx2.closePath()
ctx2.clip()
ctx2.strokeStyle = '#0000'
ctx2.lineCap = 'butt'
ctx2.lineJoin = 'miter'
ctx2.miterLimit = 4
ctx2.save()
ctx2.beginPath()
ctx2.moveTo(0, 0)
ctx2.lineTo(44, 0)
ctx2.lineTo(44, 65)
ctx2.lineTo(0, 65)
ctx2.closePath()
ctx2.clip()
ctx2.save()
ctx2.fillStyle = "#e02f2f"
ctx2.beginPath()
ctx2.moveTo(27, 65)
ctx2.lineTo(22.9, 61.9)
ctx2.lineTo(21.9, 61)
ctx2.lineTo(21.1, 61.6)
ctx2.lineTo(17, 65)
ctx2.lineTo(27, 65)
ctx2.closePath()
ctx2.moveTo(21.8, 61)
ctx2.lineTo(21.1, 60.5)
ctx2.bezierCurveTo(13.4, 54.2, 0, 41.5, 0, 28)
ctx2.bezierCurveTo(0, 9.3, 12.1, 0.4, 21.9, 0)
ctx2.bezierCurveTo(33.8, -0.5, 45.1, 10.6, 43.9, 28)
ctx2.bezierCurveTo(43, 40.8, 30.3, 53.6, 22.8, 60.2)
ctx2.lineTo(21.8, 61)
ctx2.fill()
ctx2.stroke()
ctx2.restore()
ctx2.save()
ctx2.fillStyle = "#f59595"
ctx2.beginPath()
ctx2.moveTo(18.5, 7)
ctx2.bezierCurveTo(15.3, 7, 5, 11.5, 5, 26.3)
ctx2.bezierCurveTo(5, 38, 16.9, 50.4, 19, 54)
ctx2.bezierCurveTo(19, 54, 9, 38, 9, 28)
ctx2.bezierCurveTo(9, 17.3, 15.3, 9.2, 18.5, 7)
ctx2.fill()
ctx2.stroke()
ctx2.restore()
ctx2.restore()
ctx2.restore()
// Save the results
var image = new Image()
image.src = canvas2.toDataURL()
return image
}
</script>
</body>
</html>
Try this:
let svg = `<svg xmlns="http://www.w3.org/2000/svg" ...`;
let blob = new Blob([svg], {type: 'image/svg+xml'});
let url = URL.createObjectURL(blob);
const ctx = canvas.getContext('2d');
canvas.width = 900;
canvas.height = 1400;
const appLogo = new Image();
appLogo.onload = () => ctx.drawImage(appLogo, 54, 387, 792, 960);
appLogo.src = url;
// let image = document.createElement('img');
// image.src = url;
// image.addEventListener('load', () => URL.revokeObjectURL(url), {once: true});
Note: Blob is not defined in Node.js file, This is code designed to run in the browser, not in Node.
More info here