I have an SSRS report which consists of approximately 25 columns. There are also three row groups. I'm trying to hide specific columns in the report initially, and only make those columns visible when the row groups are expanded. Here is a screenhot of the report in its collapsed state:
Collapsed Report
So, when the report is collapsed, I want these four columns hidden: Policy Number, Invoice Number, Transaction Type, Date. These columns should only be visible once the row groups are expanded. See below:
Report Expanded
Another view of the expanded report:
Expanded Row Groups
I do not have any column groups currently defined, only row groups.
I tried defining a column group using Policy Number as as test, and then set the visibility to an expression: =iif(IsNothing(fields!Current_Policy_Number.Value), False, True)
That expression hid the column, but when expanding the row groups, the column still stayed hidden.
I've been looking everywhere, but all the options I've found don't seem to fit my exact situation.
Any help would be appreciated!
One way to do that is to implement a custom grouping mechanism.
Use a custom group-icon and a hidden parameter. By default, groups should be hidden. So the visibility for necessary rows and columns should be:
=iif(Parameters!CustomGroup.Value = 0, False, True)
When user clicks the icon, a parameter is set (reload current report with CustomGroup-parameter set to inverse value) and then the groups are visible.
Related
I have a Tablix report with 4 groups. The drill down is working properly, but I would like to hide certain columns either when the report is initially run or until drilldown occurs to the group. When I try to set visibility on columns to hide then toggle on the parent group, I get an out of scope error message. If I set hide on the columns "when the report is initially ran" it hides ALL the columns not just the columns I selected to hide. I do not have column groups.
Here is my report design. Please keep in mind; I'm new to SSRS and report designing.
Thanks for any help I can get!
I tried to Hide Column Specimen Code (which is group 1). I set visibility to hide and to toggle on Accession_number (Parent Group). I got an out of scope error message.
I selected Accession DateTime column in the Visibility settings; I selected Hide until the report is initially ran. Results: Hid columns, but when I went to dilldown and see the columns they were still hidden.
I tried to hide Accession Datetime column on the various parent groups. I got the out of scope error message.
I don't have column groupings.
I am not sure what else to try.
You can add a column group, grouped by ="". Then you can apply the visibility to the column group.
I have an SSRS matrix that has one level of row groups and two levels of column groups. I have a textbox that is positioned inside one of the column groups, and outside of the other one, which is what I want. But I also want this textbox to be positioned inside of a row group.
Basically, I would like #1 in the screenshot below to have a row group associated with it so that #2 is inside that row group.
My goal is to conditionally set the row-visibility for the first row. But "row visibility..." is greyed out. As far as I can tell, the way to get the option is to make sure it's inside of a row group.
The reason I want to set visibility is because the user has the option to show or hide charts, and separately to show or hide data. If the user selects both charts and data, then I don't need the first row because the label for the data can describe the chart as well. But if the user only selects charts, then I need that first row.
If there's another approach outside of minimizing the row height, I'm all ears.
Though I'm still interested in whether this puzzle is even solvable, and if not, why not.
Steps to Repeat
A version of this problem can be repeated as follows:
Insert a new matrix in a report
Just fill in dummy values, such as a blank space, into the "RowGroup1" and "ColumnGroup" "Group On" expressions.
Add a parent group to the column group, and similarly just give it a dummy grouping expression.
Delete the second row of the matrix, via "Delete Rows Only"
You now have a matrix with the same problem. Namely, get the second cell of the first row, to be inside of a row grouping.
Is it possible to create a nested set of headers in a Tablix in SSRS.
Such that in the first level grouping (Source), it shows a header of Count and a value for the total count of that group (source).
If you expand out the Source group, it would display the values inside the group, with a header that only displays when you expand the group?
I cant seem to nest the groups correctly. Do i need to use additional Total rows within the group?
If I've understood correctly, the easiest way is to build the report fully expanded with all the detail (and the totals you want to see when expanded).
Right-Click the row header, choose properties and set the row visibility for the rows you want to hide to hidden
Finally, in the same dialog, set the 'Display can be toggled by this report item' to the textbox you want to click when expanding the group.
I have a basic Tablix in my report that currently renders as follows:
These are steps in a manufacturing process with the clock number of the person who performed them with date performed in the last two columns. However, sometimes steps are combined and performed together. In the example above, steps 10-20 are performed together, and 30-40 are performed together. So I would really like the report to be rendered like this:
I do have a column in my data called "StepRange" which in the above example would be "10-20" for the first two rows and "30-40" for the third and fourth rows. So when the value of StepRange is alike, I know those rows are performed together and henceforth the last two columns should be combined. My example shows only two rows being combined at a time, but it could be any number.
How can I make my report look like the second example above instead of the first?
Single Tablix Method
Rather than literal conditional merging, you can set the border style of a textbox using an expression to achieve a similar effect. There are a few steps, but none of them are particularly involved.
Create a parent group for StepRange. Do not add a header or footer, and delete the added column without removing the group.
Make sure that your properties panel is visible on the right of your screen. If not, check the "Properties" checkbox under the View ribbon.
Click on your first detail TextBox and expand the "BorderStyle" property. Set the "Top" property to the following expression:
=IIF(RunningValue(Field!Step.Value,CountDistinct,"StepRange")>1, "None", "Solid")
Set the Bottom property to "None".
Set the expression of the detail TextBox itself.
Replace FIELDNAME with the appropriate field:
=IIF(RunningValue(Field!Step.Value,CountDistinct,"StepRange")>1, "", Field!FIELDNAME.Value)
Repeat this process for each detail TextBox.
You may need to create a dummy row at the bottom with a black top border if you do not have a summation row. (optional)
The expression only evaluates to "Solid" for the first Step value within each StepRange group, so subsequent rows do not have a top border and appear undivided.
Nested Tablix Method
Using a nested Tablix is more straightforward. I have had some issues with them, including some rendering hiccups. But in a report this simple that may not be an issue at all.
Set up your main Tablix to group on StepRange.
Either clear or add a column to the left for the individual steps.
Select "Insert Table" from the toolbar and click on the empty cell.
Set the cells to your step and operation fields and delete the extra column.
The result should look roughly like this:
By default the inner Tablix will be detail grouped. If your detail rows are more granular than the "Step" field, go to the properties of the "(Detail)" group and add a Group Expression for Step.
You can also delete the inner header row if you don't want to see it repeated in the report.
This results in the employee fields actually being merged and spacing properly. If you don't use an aggregate function on those fields, their value will be that of the first row returned internally. Which is moot if their values are uniform across steps.
I have made a matrix report in SSRS with two column groups. I have added one of the column group also in the Row groups to use page break so I can have each column group on a separate page.
And you see in the following pictures the preview of what has happened with the output.
Page One
Page Two
You see that the page break has worked but it doesn’t hide the other column that shouldn’t be present.
Does somebody has a clue how to fix this?
I don't think just adding a page break will hide the column group's visibility. In SSRS, you can set visibility of a column group based on a condition. Right click on the column group, select Group Properties, Select "Visibility", and "Show and Hide Based on Expression".
You could set an expression based on a field or parameter value. For example, if a parameter value is such, the visibility is true, else false. Example:
=IIF(Parameters!"PARAMNAME".Value.Equals(value),false,true)
I would think in your case, if some a field was null or blank, hide the column group. The page break will take care of itself.
I have solved it with the list object in the toolbox.
I have put the matrix in the list and used a page break on the list.