I am trying to setup MySQL using a Dockerfile which uses CentOS 7 .. I know I should be using a seperate container for MySQL, but due to limitations I can't, so now I have to install it using the Dockerfile and i am running into some issues.
I have looked a few different places and got some ideas, and put the following together;
FROM centos:7
RUN yum -y update
RUN yum -y install \
httpd \
mariadb-server \
mariadb \
&& rm -rf /var/cache/yum/* \
&& yum clean all
ENV DB_USER testuser
ENV DB_PASSWORD testpass
ENV DB_NAME testdb
RUN /usr/bin/mysqld && sleep 5 && \
mysql -uroot -e "CREATE USER '${DB_USER}'#'%' IDENTIFIED BY '${DB_PASSWORD}'" && \
mysql -uroot -e "GRANT ALL PRIVILEGES ON *.* TO '${DB_USER}'#'%' WITH GRANT OPTION" &&\
mysql -uroot -e "CREATE DATABASE ${DB_NAME}"
EXPOSE 80
EXPOSE 3306
CMD ["/usr/sbin/httpd","-D","FOREGROUND"]
This seems to be for abother distro as /usr/bin/mysqld doesnt actually exist on Centos7 and I can find no other way to set things up manually ... I usually use the mysql_secure_installation command when setting up a VM, but as im doing this through a Dockerfile i can't as it requires input from the user.
I was wondering if anybody has manually setup MySQL using a Dockerfile on Centos and has some tips to get this going.
The error i keep coming up against when trying to use Mysql in the container is;
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'
Related
I am trying to install WordPress on my EC2 Linux2.
I use a bash script with even the following rows that I think does not work:
# MySQL
sudo yum install -y mysql
sudo export MYSQL_HOST=${db_address}
sudo mysql --user=${db_username} --password=${db_password} ${db_name}
sudo mysql -e "CREATE USER 'wordpress' IDENTIFIED BY '${db_password}';"
sudo mysql -e "GRANT ALL PRIVILEGES ON ${db_name}.* TO wordpress;"
sudo mysql -e "FLUSH PRIVILEGES;"
sudo mysql -e "Exit"
What is wrong?
On old MySQL 5.6 I was automatically installing it and creating all needed users and passwords, using the code below.
Is there a way to do the same on a new MySQL 8.0 so that it automatically installs into docker containers allows root without a password and creates all the above?
RUN yum -y install https://dev.mysql.com/get/mysql57-community-release-el7-11.noarch.rpm
RUN yum-config-manager --disable mysql57-community; yum-config-manager --enable mysql56-community
RUN yum -y install mysql-community-server mysql-community-client
#Configure MySQL
# Needed to create system tables etc.
chown -R mysql:mysql /var/lib/mysql
su -l mysql -c "/usr/bin/mysql-systemd-start pre"
# Start main service
(su -l mysql -c "/usr/bin/mysqld_safe --basedir=/usr") &
# Don't signal startup success before a ping works
su -l mysql -c "/usr/bin/mysql-systemd-start post"
mysql -e "CREATE DATABASE IF NOT EXISTS \`${USERNAME}\`;"
mysql -e "GRANT ALL PRIVILEGES ON \`${USERNAME}\`.* TO \`${USERNAME}\`#'%' IDENTIFIED BY \"${MYSQL_PASS}\";"
mysql -e "GRANT ALL PRIVILEGES ON \`${USERNAME}\`.* TO \`${USERNAME}\`#'localhost' IDENTIFIED BY \"${MYSQL_PASS}\";"
mysqladmin shutdown
I'm setting up a Dockerfile where I can run my automated tests, and I'm having troubles with connecting to mysql database.
The Dockerfile depends on a prevoously built image and looks like this:
# Stage 0, assign argument as multistage image alias
ARG PHP_IMAGE
FROM ${PHP_IMAGE} as image
# Stage 1, start tests
FROM php:7.2-fpm
RUN curl -sS https://getcomposer.org/installer | php \
&& chmod +x composer.phar && mv composer.phar /usr/local/bin/composer
RUN apt-get update && apt-get install -y gnupg
RUN curl -sL https://deb.nodesource.com/setup_8.x | bash - && \
apt-get install -yq nodejs build-essential \
git unzip \
libfreetype6-dev \
libjpeg62-turbo-dev \
libmcrypt-dev \
libpng-dev \
subversion \
&& curl -sL https://deb.nodesource.com/setup_8.x | bash - \
&& pecl install mcrypt-1.0.1 \
&& docker-php-ext-enable mcrypt \
&& docker-php-ext-configure gd --with-freetype-dir=/usr/include/ --with-jpeg-dir=/usr/include/ \
&& docker-php-ext-install -j$(nproc) gd \
&& docker-php-ext-install -j$(nproc) mysqli
RUN apt-get install -y mysql-server
RUN /etc/init.d/mysql start
RUN mysqladmin -u root -p status
RUN yes | pecl install xdebug \
&& echo "zend_extension=$(find /usr/local/lib/php/extensions/ -name xdebug.so)" > /usr/local/etc/php/conf.d/xdebug.ini \
&& echo "xdebug.remote_enable=on" >> /usr/local/etc/php/conf.d/xdebug.ini \
&& echo "xdebug.remote_autostart=off" >> /usr/local/etc/php/conf.d/xdebug.ini
RUN npm install -g npm
COPY --from=image /var/www/html/ /var/www/html/
WORKDIR /var/www/html/
COPY scripts/develop.sh develop.sh
COPY scripts/docker-test.sh docker-test.sh
RUN ["/bin/bash", "-c", "bash develop.sh && bash docker-test.sh"]
I've added RUN mysqladmin -u root -p status to try to debug why connecting to mysql failed and I got
Enter password: mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2 "No such file or directory")'
Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists!
To run this I am running
docker build -t $TEST_DOCKER_NAME --build-arg PHP_IMAGE=$DOCKER_IMAGE_NAME_PHP -f Dockerfile.test .
The TEST_DOCKER_NAME and DOCKER_IMAGE_NAME_PHP are stored in an env file and read from there. The PHP image was built successfuly and I'm using it to copy the files from there to here so that I can run PHPUnit.
When I remove that RUN line my build fails when I'm trying to run a script that creates the database
mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to MySQL server on 'localhost' (99 "Cannot assign requested address")'
Check that mysqld is running on localhost and that the port is 3306.
You can check this by doing 'telnet localhost 3306'
What do I need to do in my Dockerfile to make it work?
Answer to your specific problem
This is a common mistake people make when using docker. When you use the RUN directive in docker you are running a command through to completion, capturing the filesystem changes and then exiting.
So when you have the lines
RUN /etc/init.d/mysql start
RUN mysqladmin -u root -p status
The first one is starting mysql. But then the changes are captured, the container is exited and then a new one is started to run the mysqladmin command. Therefore the mysql process is no longer running.
To avoid this you could combine them into a single line like
RUN /etc/init.d/mysql start && mysqladmin -u root -p status
However you will need to do this every time you want to use mysql. Such as in your develop.sh.
Wider answer
It is not recommended to run multiple processes within your container and it is also not recommended to use init.d or other system startup frameworks within your container.
You seem to be treating your container like a virtual machine and are having issues because containers are not VMs.
I recommend you explore running mysql in a separate container and then using a tool like docker-compose to start and and stop your containers.
I have a shell script and want to invoke via command line the mysql client
cat \
"${SQL_DIR}/mysql-schema.sql" \
"${SQL_DIR}/privileges.sql" \
"${SQL_DIR}/mysql-import.sql" \
"${SQL_DIR}/after.sql" \
| docker exec -i "${PREPARE_NAME}" mysql -h127.0.0.1 -P 3306 -uroot -proot --default-character-set=utf8
it tells me
ERROR 2003 (HY000): Can't connect to MySQL server on '127.0.0.1' (111)
read unix #->/var/run/docker.sock: read: connection reset by peer
If I do this from the command line everything works fine.
What shall I do?
You need mysql to be installed on your computer. Even if you handle Docker with the shell script: you really just need it on the computer that runs the shell script. Then you will get rid of
/home/.../some_bash_script.sh: line 123: mysql: command not found
and
ERROR 2003 (HY000): Can't connect to MySQL server on '127.0.0.1' (111)
On your computer, run:
sudo apt-get update && sudo apt-get install mysql-server
I want to have a mysql database with some basic dataset.
I create mysql docker image using this https://index.docker.io/u/brice/mysql/ Dockerfile, but delete VOLUME ["/var/lib/mysql", "/var/log/mysql"] line, so the Dockerfile looks like:
FROM ubuntu:12.10
MAINTAINER Brandon Rice <brice84#gmail.com>
RUN dpkg-divert --local --rename --add /sbin/initctl
RUN ln -s /bin/true /sbin/initctl
RUN apt-get update
RUN apt-get upgrade -y
RUN apt-get -y install mysql-server
RUN sed -i -e"s/^bind-address\s*=\s*127.0.0.1/bind-address = 0.0.0.0/" /etc/mysql/my.cnf
RUN /usr/bin/mysqld_safe & \
sleep 10s && \
mysql < create_my_db.sql && \
mysql -e "GRANT ALL ON *.* to 'root'#'%'; FLUSH PRIVILEGES"
EXPOSE 3306
CMD ["mysqld_safe"]
After that I build image such as:
docker build -t my_db_mysql .
Everything is ok while i append data, but when i want to delete db, for example:
FROM my_db_mysql
RUN /usr/bin/mysqld_safe & \
sleep 10s && \
mysql -e "DROP DATABASE my_db;"
EXPOSE 3306
CMD ["mysqld_safe"]
I obtain next error:
ERROR 6 (HY000) at line 1: Error on delete of './my_db//db.opt' (Errcode: 1)
It is appears not only when I want to build image, but even when I exec: mysql -u user -p -e "DROP DATABASE my_db;"
How to solve this?
Thanks
Update: Also I tried to run docker with different filesystem, e.g -s vfs or -s devicemapper, but nothing changed.
When I build image with VOLUME ["/var/lib/mysql", "/var/log/mysql"] - everything works properly, but i can't commit this changes.
Update: Seems I resolve this issue. Problem was in host machine with ubuntu 12.04. Issue disappeared when I update ubuntu to 13.10. Thank a lot!