I entered this code on my octave GUI on Mac:
>>cd file:///Users/Sudipta/Downloads/Stanford/warmUpExercise.m
error: file:///Users/Sudipta/Downloads/Stanford/warmUpExercise.m: No such file or directory
I am using macOS Big Sur and Octave version 3.8.0.The file in question exists in my computer and I have checked this code multiple times.
It is not able to locate the file on my MacBook for some reason. Can someone help?
Edit: I have tried a new code as mentioned in the comments, but it also can't find the file
>> cd Users/Sudipta/Downloads/Stanford/warmUpExercise.m
error: Users/Sudipta/Downloads/Stanford/warmUpExercise.m: No such file or directory
I have also tried:
1.>> cd Users/Sudipta/Downloads
error: Users/Sudipta/Downloads No such file or directory
2.>> cd Users/Sudipta/Downloads/Stanford
error: Users/Sudipta/Downloads/Stanford No such file or directory
And I got the same error as above.
The other code gave a different error:
3.> cd /Users/Sudipta/Downloads
warning: load_path: .: Operation not permitted
QKqueueFileSystemWatcherEngine::addPaths: open: Operation not permitted
Warning: QFileSystemWatcher: failed to add paths: /Users/Sudipta/Downloads
I am trying to install couchbase on my macOS. I am using pip3 install couchbase to install it.
And I am getting error as
`note: '__uint128_t' declared here
/Library/Developer/C
ommandLineTools/SDKs/MacOSX10.15.sdk/usr/include/sys/_types.h:76:9: error: unknown type name '__uint32_t'; did you mean '__uint128_t'?
typedef __uint32_t __darwin_useconds_t; /* [???] microseconds */
^
note: '__uint128_t' declared here
In file included from src/bucket.c:18:
In file included from src/pycbc.h:45:
In file included from src/python_wrappers.h:20:
In file included from /Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework/Versions/3.8/include/python3.8/Python.h:25:
In file included from /Library/Developer/CommandLineTools/SDKs/MacOSX10.15.sdk/usr/include/stdio.h:64:
In file included from /Library/Developer/CommandLineTools/SDKs/MacOSX10.15.sdk/usr/include/_stdio.h:71:
/Library/Developer/CommandLineTools/SDKs/MacOSX10.15.sdk/usr/include/_types.h:43:9: error: unknown type name '__uint32_t'; did you mean '__uint128_t'?
typedef __uint32_t __darwin_wctype_t;
^
note: '__uint128_t' declared here
In file included from src/bucket.c:18:
In file included from src/pycbc.h:45:
In file included from src/python_wrappers.h:20:
In file included from /Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework/Versions/3.8/include/python3.8/Python.h:25:
In file included from /Library/Developer/CommandLineTools/SDKs/MacOSX10.15.sdk/usr/include/stdio.h:64:
In file included from /Library/Developer/CommandLineTools/SDKs/MacOSX10.15.sdk/usr/include/_stdio.h:75:
In file included from /Library/Developer/CommandLineTools/SDKs/MacOSX10.15.sdk/usr/include/sys/_types/_va_list.h:31:
/Library/Developer/CommandLineTools/SDKs/MacOSX10.15.sdk/usr/include/machine/types.h:37:2: error: architecture not supported
#error architecture not supported
^
fatal error: too many errors emitted, stopping now [-ferror-limit=]
20 errors generated.
/private/tmp/pip-install-46t38raq/couchbase_25d29b67ce814e2badeb9f2deaba5d2c/cbuild_config.py:271: UserWarning: Adding /usr/local to lib search path for OS X
warnings.warn('Adding /usr/local to lib search path for OS X')
error: command 'clang' failed with exit status 1
----------------------------------------
ERROR: Failed building wheel for couchbase Failed to build couchbase
ERROR: Could not build wheels for couchbase which use PEP 517 and cannot be installed directly
I also tried pip3 install --no-use-pep517 couchbase then also I am getting could not build a wheel for couchbase
I have upgraded my pip to the latest. I have python3.8. I also installed pep517.
I am trying to connect to MariaDB using mYm (Mysql wrapper for MATLAB) on MATLAB.
Every time I use mYm to access DB I get an error
Invalid MEX-file 'path\to\DB\MySQL\mYm1.36 64-bit\mym.mexw64': A dynamic link library (DLL) initialization routine failed.
So far what I've understood is that DLL in question i.e. libmysql.dll is not registered.I tried do do that using regsvr32 "path\to\DB\MySQL\mYm1.36 64-bit\libmysql.dll". But that results in following error:
The module path\to\DB\MySQL\mYm1.36 64-bit\libmysql.dll failed to load.
Make sure the binary is stored at specified path or debug it to check for problems with binary or dependent .DLL files.
The specified module could not be found.
I require a solution to fix this error.
I might be wrong in assuming the dll is not registered.
I am trying to compile and build winexe. I have downloaded the samba source and ran the following command to compile the winexe.
./waf configure --samba-dir=../../samba --samba-inc-dirs=../../samba/ --samba-lib-dirs=../../samba/
I am getting the following error. Please suggest me to resolve the error.
[3326/3810] Compiling default/source/smb_static/smb_static.objlist.empty.c
Waf: Leaving directory `/root/samba/bin'
Build failed: could not find 'source/smb_static/smb_static.objlist.empty.c' for
{task: cc smb_static.objlist.empty.c -> smb_static.objlist.empty_2.o}
Checking for library smb_static : not found
Build of static winexe : disabled
Cannot continue! Please either install Samba shared libraries and re-run waf, or download the Samba source code and re-run waf with the "--samba-dir" option.
(complete log in /root/winexe/source/build/config.log)
execfile is deprecated,
edit the file "smb_static/wscript",
remove the line with execfile and use exec(open("wscript").read()) instead
I would like to ask, how can I load new module in Kamailio 4.1.2?
Actually, I have an issue, when I tried to compile my kamaiio.cfg
I've got error:
root#kamailio:/usr/local/# kamailio -c kamailio.cfg
loading modules under /usr/local/lib64/kamailio/modules/
0(25392) ERROR: <core> [sr_module.c:587]: load_module(): ERROR: load_module: could not find module <websocket> in </usr/local/lib64/kamailio/modules/>
0(25392) : <core> [cfg.y:3408]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 323, column 12-25: failed to load module
0(25392) ERROR: <core> [cfg.y:3272]: yyparse(): cfg. parser: failed to find command ws_handle_handshake
0(25392) : <core> [cfg.y:3411]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 1083, column 27: unknown command, missing loadmodule?
ERROR: bad config file (2 errors)
when I look physically to the /usr/local/lib64/kamailio/modules/ there is some modules, but websocket.so is missing.
So, how can I get and load module in Kamailio?
Thank you for help!
You haven't installed the module websocket. Edit modules.lst file in the source code directory and add websocket to include_modules variable. If you don't have modules.lst, just do:
make cfg
Alternative is to do:
make cfg include_modules="websocket"
By default, the build system for kamailio compiles and install only the modules that have the same dependencies as the core of the application. For websocket you need to install libunistring and openssl (libssl) devel packages.
Steps to load new module to Kamailio server. (Try if above answer is not working for you)
Check the modules is exist in the default module directly /usr/local/lib64/kamailio/modules.
If found, add loadmodule "module_name.so" in load module section in kamailio.cfg file.
If the module is not found in default module directory, you can check for the source code of that module in the default module source code directory /usr/local/src/kamailio-4.4/kamailio/modules.
If source code found, enter to the module directory. Then create modules' shared object file(.so) by following commands.
./configure
make
make test
make install
Then you will get a shared object file(.so). Copy that file into the default module directory. and load this module from the kamailio.cfg file as mentioned in step 1.
If module source code does not exist in the default source code directory, You need to download the source code from the web. And follow step 3 and 4.