I am trying to find out the difference between 2 functions. In my
react native app I use an AppState eventlistener to check if the app
is running in the background or foreground (see code below):
AppState.addEventListener('change', this._handleAppStateChange);
the function looks like this:
_handleAppStateChange = (nextAppState) => {
console.log('nextAppState', nextAppState)
this.setState({
appState: nextAppState
});
};
I did not like the way te function is made because in the listener you call it without a parameter
but it the function itself it has a parameter. So I wanted to change this to make it more clear.
This is what is made:
_handleAppStateChange (nextAppState) {
console.log('nextAppState', nextAppState)
this.setState({
appState: nextAppState
});
};
This works fine the nextAppState is still logged but the setstate does not work anymore
is says that it`s not a function. Can someone explain me why?
And can someone explain me which of both functions is the best to use.
Thx a lot!
Start using arrow functions, one of the reason why arrow functions were created is for the problem you have mentioned i.e losing this in the function context.
So in order for your function to work you need to bind the function to this.
In your constructor add this line
this._handleAppStateChange = this._handleAppStateChange.bind(this)
Or you can replace this function
AppState.addEventListener('change', this._handleAppStateChange);
to
AppState.addEventListener('change', (nextAppState) => this._handleAppStateChange(nextAppState));
Bonus.
If you need to pass extra parameter other than nextAppState or which is in state. This line wont work
AppState.addEventListener('change', (nextAppState, this.state.someRandmValue) => this._handleAppStateChange(nextAppState, this.state.someRandmValue));
As this.state.someRandomValue is undefined since handleAppState wont emit this value instead use this
AppState.addEventListener('change', (nextAppState) => this._handleAppStateChange(nextAppState, this.state.someRandmValue));
Basically when running addEventListener I cannot access any of my saved variables from outside the function I am creating.
In the following code I always get the error Property 'xAxisLabel' does not exist on type 'HTMLElement'.
xAxisLabel:string = 'xAxis';
xAxisField:HTMLElement;
filterChanged(element: HTMLElement) {
element.addEventListener("change", function(){
this.xAxisLabel = 'Countries';
});
}
ngOnInit() {
this.xAxisField=document.getElementById('xAxisField');
this.filterChanged(this.xAxisField);
}
I am sure it's a fairly simple solution but I haven't been able to find it online. Any help would be appreciated.
It is due to 'this' keyword binding. You need to change your code to use arrow function, so:
filterChanged(element: HTMLElement) {
element.addEventListener("change", () => {
this.xAxisLabel = 'Countries';
});
}
now this.xAxisLabel refers to correct value
I was looking at the sample code for the tutorial at https://forge.autodesk.com/blog/custom-window-selection-forge-viewer-part-iii which is located at https://github.com/Autodesk-Forge/forge-rcdb.nodejs/blob/master/src/client/viewer.components/Viewer.Extensions.Dynamic/Viewing.Extension.SelectionWindow/Viewing.Extension.SelectionWindow.Tool.js as well as the documentation at https://developer.autodesk.com/en/docs/viewer/v2/reference/javascript/toolinterface/ --- Most of these functions are getting called properly in my tool such as handleSingleClick, handleMouseMove, handleKeyDown, and so on, but two of them are not getting hit -- handleButtonDown and handleButtonUp. I was using viewer version 3.3.x but I have updated to use 4.0.x thinking that that might help to resolve the problem, but the same issue occurs in both versions. Thanks for any help.
The following code block from theAutodesk.Viewing.ToolController#__invokeStack(), _toolStack stands for activated tools in the ToolController, the method stands for callback functions started with handle, i.e. handleSingleClick, handleMouseMove, handleKeyDown, handleButtonDown, handleButtonUp, etc.
for( var n = _toolStack.length; --n >= 0; )
{
var tool = _toolStack[n];
if( tool[method] && tool[method](arg1, arg2) )
{
return true;
}
}
Based on my experience, if there is a handle function such as handleButtonDown or handleButtonUp executed before your custom tools' and returned true, then your handles will never be called.
Fortunately, Forge Viewer (v3.2) starts invoking a priority mechanism for custom tools registered in ToolController. ToolController will use the priority number to sort the tools in it, and the priority number of each tool is 0 by default. You can override the priority to make your tools be hit before other tools like this way, to add a function getPriority() to return a number greater than 0:
this.getPriority = function() {
return 100;
};
I found out that when using ES6 and the class syntax, extending your tool from Autodesk.Viewing.ToolInterface will prevent the overrides to work properly, probably because it is not implemented using prototype in the viewer source code.
You can simply create a class and implement the methods that are of interest for your tool:
// KO: not working!
class MyTool extends Autodesk.Viewing.ToolInterface {
getName () {
return 'MyTool'
}
getNames () {
return ['MyTool']
}
handleButtonDown (event, button) {
return false
}
}
// OK
class MyTool {
getName () {
return 'MyTool'
}
getNames () {
return ['MyTool']
}
handleButtonDown (event, button) {
return false
}
}
I'm looking to hook-up sort events performed on ng2-smart-table. Followed https://akveo.github.io/ng2-smart-table/#/documentation, I see bunch of events that are exposed like rowSelect, mouseover etc but I don't see sort events published/emitted by the library. I'm thinking of changing Ng2SmartTableComponent and emit an event when (sort) is called internally. May I know if anyone did it already or is there a hack I can rely upon.
The source of the sort in ng2-smart-table is shown on GitHub (link to code).
If you want to change the compare-Function (as used by default) you can add your own custom function in your ng2-smart-table-configuration:
columns: {
group_name: {
title: 'Groupname',
compareFunction(direction: any, a: any, b: any) => {
//your code
}
}
}
I was searching for an event to sort my data remotely and I have found a solution. Also I have some logic for page change event (remote paging). Here is what works for me.
ts
source: LocalDataSource = new LocalDataSource();
ngOnInit() {
this.source.onChanged().subscribe((change) => {
if (change.action === 'sort') {
this.sortingChange(change.sort);
}
else if (change.action === 'page') {
this.pageChange(change.paging.page);
}
});
}
html
<ng2-smart-table [settings]="settings" [source]="source"></ng2-smart-table>
This solution won't replace custom logic but it might help you solve your problem.
I am new to React Native. How can we refresh/reload previous screen when returning to it by calling goBack()?
Lets say we have 3 screens A, B, C:
A -> B -> C
When we run goBack() from screen C it goes back to screen B but with old state/data. How can we refresh it? The constructor doesn't get called 2nd time.
Adding an Api Call in a focus callBack in the screen you're returning to solves the issue.
componentDidMount() {
this.props.fetchData();
this.willFocusSubscription = this.props.navigation.addListener(
'willFocus',
() => {
this.props.fetchData();
}
);
}
componentWillUnmount() {
this.willFocusSubscription.remove();
}
UPDATE 2023: willFocus event was renamed to focus
componentDidMount() {
this.props.fetchData();
this.focusSubscription = this.props.navigation.addListener(
'focus',
() => {
this.props.fetchData();
}
);
}
componentWillUnmount() {
this.focusSubscription();
}
How about using useIsFocused hook?
https://reactnavigation.org/docs/function-after-focusing-screen/#re-rendering-screen-with-the-useisfocused-hook
const componentB = (props) => {
// check if screen is focused
const isFocused = useIsFocused();
// listen for isFocused, if useFocused changes
// call the function that you use to mount the component.
useEffect(() => {
isFocused && updateSomeFunction()
},[isFocused]);
}
For react-navigation 5.x use
5.x
use
componentDidMount() {
this.loadData();
this.focusListener = this.props.navigation.addListener('focus', () => {
this.loadData();
//Put your Data loading function here instead of my this.loadData()
});
}
For functional component
function Home({ navigation }) {
React.useEffect(() => {
const unsubscribe = navigation.addListener('focus', () => {
loadData();
//Put your Data loading function here instead of my loadData()
});
return unsubscribe;
}, [navigation]);
return <HomeContent />;
}
On your screen B constructor will work like magic :)
this.props.navigation.addListener(
'didFocus',
payload => {
this.setState({is_updated:true});
}
);
Yes, constructor is called only for the first time and you can't call it twice.
First: But you can separate the data getter/setter from the constructor and put it in a function, this way you can pass the function down to the next Scene and whenever you're going back you may simply recall the function.
Better: You can make a go back function in your first scene which also updates the scene while going back and pass the go back function down. This way the second scene would not be aware of your update function which is reasonable.
Best: You can use redux and dispatch a go-back action in your second scene. Then in your reducer you take care of going back & refreshing your scene.
The built in listener function which comes with React-Navigation would be the easiest solution. Whenever a component is 'focused' on a again by navigating back, the listener will fire off. By writing a loadData function that can be called both when loading the Component AND when the listener is notified, you can easily reload data when navigating back.
componentWillMount(){
this._subscribe = this.props.navigation.addListener('didFocus', () => {
this.LoadData();
//Put your Data loading function here instead of my this.LoadData()
});}
Easy! insert the function inside useFocusEffect(func)
import { useFocusEffect } from '#react-navigation/native'
I have a similar situation and the way i refreshed was to reset the route when the back button is pressed. So, what happens is when the back button is pressed the screen is re-pushed into the stack and the useEffect on my screen loads the data
navigation.reset({
index: 0,
routes: [{ name: "SCREEN WHERE THE GOBACK BUTTON SHOULD GO" }],
});
Update for react-navigation v5 and use the React Hooks. Actually, the use is the same with react base class. For more detail, please checkout the documentation here
Here is the sample code:
function Profile({ navigation }) {
React.useEffect(() => {
const unsubscribe = navigation.addListener('focus', () => {
// do something
});
return unsubscribe;
}, [navigation]);
return <ProfileContent />;
}
As above code, We add the event listener while the variable navigation change then We do something like call function refresh() and finally, we return the function for removing the event listener. Simple!
I think we have a very easy way (which works in 2021) to do so. Instead of using goBack or navigate, you should use push
this.props.navigation.push('your_route_B').
You can also pass params in the same way as we pass in navigate.
The only difference b/w navigate and push is that navigate checks if the route which we are passing exists in the stack. Thus taking us to the older one but, push just sends us there without checking whether that is in the stack or not (i.e, whether the route was visited earlier or not.)
This can be achived by useFocusEffect from '#react-navigation/native'
useFocusEffect will effect every time when screen is focus
Ref: https://reactnavigation.org/docs/use-focus-effect/
import { useFocusEffect } from '#react-navigation/native';
function Profile({ }) {
useFocusEffect(
React.useCallback(() => {
//Below alert will fire every time when profile screen is focused
alert('Hi from profile')
}, [])
);
return // ...code ;
}
You can use this event: navigation.addListener('focus'
And you can implement like this:
const Cards = ({ navigation }) => {
...
useEffect(() => {
const load =async ()=>{
const a = await selectGlobalCards()
}
navigation.addListener('focus',() =>{
load();
});
}, [])
or you can use useIsFocused, and you can use that as a dependecy for useEffect
import { useIsFocused } from '#react-navigation/native'
const Cards = ({ navigation }) => {
const isFocused = useIsFocused()
useEffect(() => {
const load =async ()=>{
const a = await selectGlobalCards()
}
load()
}, [isFocused])
For react navigation (5.x), you just need to add a focus subscription and put your component initializing logic in a separate function like so:
componentDidMount() {
this.init();
this.didFocusSubscription = this.props.navigation.addListener(
'focus',
() => {
this.init();
}
);
}
init = async () => {
//fetch some data and set state here
}
If you're trying to get new data into a previous view, and it isn't working, you may want to revisit the way you're piping data into that view to begin with. Calling goBack shouldn't effect the mounting of a previous component, and likely won't call its constructor again as you've noted.
As a first step, I would ask if you're using a Component, PureComponent, or Functional Component. Based on your constructor comment it sounds like you're extending a Component class.
If you're using a component, the render method is subject to shouldComponentUpdate and the value of your state is in your control.
I would recommend using componentWillReceiveProps to validate the component is receiving the new data, and ensuring its state has been updated to reflect the new data.
If you're using the constructor to call an API or async function of some kind, consider moving that function into a parent component of both the route you're calling goBack from and the component you're wanting to update with the most recent data. Then you can ask your parent component to re-query the API, or update its state from a child component.
If Route C updates the "state/data" of the application, that update should be propagated to a shared parent of routes A, B and C, and then passsed down as a prop.
Alternatively, you can use a state management solution like Redux to maintain that state independent of parent/child components - you would wrap your components in a connect higher-order component to get the latest updates any time the application state changes.
TL;DR Ultimately it sounds like the answer to your question is rooted in where your application state is being stored. It should be stored high enough in your component hierarchy that each route always receives the latest data as a prop, passed from its parent.
Thanks to #Bat.
I have spent a lot of hours on finding the answer and finally, I got a basic solution which is working according to my needs. I was quite worried though.
Simply make a function like this in your previous activity make sure to bind it.
changeData(){
var mydata= salesmanActions.retrieveAllSalesman();
this.setState({dataListFill: mydata});
alert('' + mydata.length);
}
Simple, then in constructor bind this,
this.changeData= this.changeData.bind(this);
After that, as I am using react native navigation, so I will simply pass this function to the second screen just like the code below:
onPress={() => this.props.navigation.navigate('Add Salesman', {doChange:
this.changeData} )}
So when the new screen registered as "Add Salesman" will be called, a parameter named "doChange" which is assigned a function will also be transfered to other screen.
Now, in other screen call this method anywhere, by :
this.props.route.params.doChange();
It works for me. I hope works for you too, THANKS for the idea #Bat.
let we have 2 screen A and B , screen A showing all data . and screen B is responsible for adding that data. we add some data on using screen B and want to show instant changes on Screen A . we use below code in A
componentDidMount(){
this.focusListener = this.props.navigation.addListener('focus', () => {
thi`enter code here`s.startData();
//Put your Data loading function here
});
}
This is what you can do with react navigation v6.
Create a separate stack in stack navigator like this:
const PropertyListStack = () => {
return (
<Stack.Navigator screenOptions={{headerShown: false}}>
<Stack.Screen name={ROUTE_PROPERTY_LIST} component={PropertyList}/>
</Stack.Navigator>
)};
Now, whenever you you want to reload your initial screen navigate using this stack. like this:
navigation.navigate(
ROUTE_DASHBOARD_TABS,
{screen: ROUTE_PROPERTY_LIST_STACK}
);
This will reload your base screen. In my case base screen is PropertyList.
If you know the name of the Screen you want to go , then you can use this code.
navigation.navigate("Screen"); navigation.replace("Screen");
This code works fine if you don't have nested routes.
This answer assumes that the react-native-navigation library is being used, which is unlikely because it doesn't actually have a goBack() method...
The constructor doesn't call a second time because screen A and B are still rendered (but hidden behind screen C). If you need to know when screen B is going to be visible again you can listen to navigation events.
class ScreenB extends Component {
constructor(props) {
super(props);
// Listen to all events for screen B
this.props.navigator.setOnNavigatorEvent(this.onNavigatorEvent);
}
onNavigatorEvent = event => {
switch (event.id) {
case 'willAppear':
// refresh your state...
break;
};
}
Other events: willDisappear, didAppear, didDisappear
An alternate solution to your problem is to use a state management solution like Redux to provide the state to all screens whenever it is updated (rather than just on screen transitions. See old react-native-nav/redux example.