while fetching metrics getting this error.
oci.exceptions.ServiceError: {'opc-request-id': 'irogegjeojgeakse', 'code': 'LimitExceeded', 'message': 'Query cannot result in more than 2000 streams.', 'status': 400}
What is your question? The error message seems clear as to what the issue is. You will need to make queries to this API which are more fine-grained in the results they are requesting than the query you made which resulted in that error.
Related
This is my PHP SQL statement and it's returning false while var dumping
$sql = $dbh->prepare('INSERT INTO users(full_name, e_mail, username, password) VALUES (:fullname, :email, :username, :password)');
$result = $sql->execute(array(
':fullname' => $_GET['fullname'],
':email' => $_GET['email'],
':username' => $_GET['username'],
':password' => $password_hash));
TL;DR
Always have set PDO::ATTR_ERRMODE to PDO::ERRMODE_EXCEPTION in your PDO connection code. It will let the database tell you what the actual problem is, be it with query, server, database or whatever. Also, make sure you can see PHP errors in general.
Always replace every PHP variable in the SQL query with a question mark, and execute the query using prepared statement. It will help to avoid syntax errors of all sorts.
Explanation
Sometimes your PDO code produces an error like Call to a member function execute() or similar. Or even without any error but the query doesn't work all the same. It means that your query failed to execute.
Every time a query fails, MySQL has an error message that explains the reason. Unfortunately, by default such errors are not transferred to PHP, and all you have is a silence or a cryptic error message mentioned above. Hence it is very important to configure PHP and PDO to report you MySQL errors. And once you get the error message, it will be a no-brainer to fix the issue.
In order to get the detailed information about the problem, either put the following line in your code right after connect
$dbh->setAttribute( PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION );
(where $dbh is the name of your PDO instance variable) or - better - add this parameter as a connection option. After that all database errors will be translated into PDO exceptions which, if left alone, would act just as regular PHP errors.
After getting the error message, you have to read and comprehend it. It sounds too obvious, but learners often overlook the meaning of the error message. Yet most of time it explains the problem pretty straightforward:
Say, if it says that a particular table doesn't exist, you have to check spelling, typos, letter case. Also you have to make sure that your PHP script connects to a correct database
Or, if it says there is an error in the SQL syntax, then you have to examine your SQL. And the problem spot is right before the query part cited in the error message.
You have to also trust the error message. If it says that number of tokens doesn't match the number of bound variables then it is so. Same goes for absent tables or columns. Given the choice, whether it's your own mistake or the error message is wrong, always stick to the former. Again it sounds condescending, but hundreds of questions on this very site prove this advice extremely useful.
Note that in order to see PDO errors, you have to be able to see PHP errors in general. To do so, you have to configure PHP depends on the site environment:
on a development server it is very handy to have errors right on the screen, for which displaying errors have to be turned on:
error_reporting(E_ALL);
ini_set('display_errors',1);
while on a live site, all errors have to be logged, but never shown to the client. For this, configure PHP this way:
error_reporting(E_ALL);
ini_set('display_errors', 0);
ini_set('log_errors', 1);
Note that error_reporting should be set to E_ALL all the time.
Also note that despite the common delusion, no try-catch have to be used for the error reporting. PHP will report you PDO errors already, and in a way better form. An uncaught exception is very good for development, yet if you want to show a customized error page, still don't use try catch for this, but just set a custom error handler. In a nutshell, you don't have to treat PDO errors as something special but regard them as any other error in your code.
P.S.
Sometimes there is no error but no results either. Then it means, there is no data to match your criteria. So you have to admit this fact, even if you can swear the data and the criteria are all right. They are not. You have to check them again. I've short answer that would help you to pinpoint the matching issue, Having issue with matching rows in the database using PDO. Just follow this instruction, and the linked tutorial step by step and either have your problem solved or have an answerable question for Stack Overflow.
Some time ago I had the same problem of not seeing any error messages from mysql. After a research it turned out that the problem has got nothing to do with PHP itself, but with mysql server configuration. The default value of the variable lc_messages_dir pointed to non existing directory. After adding a line in mysqld.cnf, then restarted the mysql server, and finally I was able to see the error messages. For me the following was the right one:
lc_messages_dir=/usr/share/mysql
It is described in the mysql reference manual: https://dev.mysql.com/doc/refman/5.7/en/error-message-language.html
This is my PHP SQL statement and it's returning false while var dumping
$sql = $dbh->prepare('INSERT INTO users(full_name, e_mail, username, password) VALUES (:fullname, :email, :username, :password)');
$result = $sql->execute(array(
':fullname' => $_GET['fullname'],
':email' => $_GET['email'],
':username' => $_GET['username'],
':password' => $password_hash));
TL;DR
Always have set PDO::ATTR_ERRMODE to PDO::ERRMODE_EXCEPTION in your PDO connection code. It will let the database tell you what the actual problem is, be it with query, server, database or whatever. Also, make sure you can see PHP errors in general.
Always replace every PHP variable in the SQL query with a question mark, and execute the query using prepared statement. It will help to avoid syntax errors of all sorts.
Explanation
Sometimes your PDO code produces an error like Call to a member function execute() or similar. Or even without any error but the query doesn't work all the same. It means that your query failed to execute.
Every time a query fails, MySQL has an error message that explains the reason. Unfortunately, by default such errors are not transferred to PHP, and all you have is a silence or a cryptic error message mentioned above. Hence it is very important to configure PHP and PDO to report you MySQL errors. And once you get the error message, it will be a no-brainer to fix the issue.
In order to get the detailed information about the problem, either put the following line in your code right after connect
$dbh->setAttribute( PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION );
(where $dbh is the name of your PDO instance variable) or - better - add this parameter as a connection option. After that all database errors will be translated into PDO exceptions which, if left alone, would act just as regular PHP errors.
After getting the error message, you have to read and comprehend it. It sounds too obvious, but learners often overlook the meaning of the error message. Yet most of time it explains the problem pretty straightforward:
Say, if it says that a particular table doesn't exist, you have to check spelling, typos, letter case. Also you have to make sure that your PHP script connects to a correct database
Or, if it says there is an error in the SQL syntax, then you have to examine your SQL. And the problem spot is right before the query part cited in the error message.
You have to also trust the error message. If it says that number of tokens doesn't match the number of bound variables then it is so. Same goes for absent tables or columns. Given the choice, whether it's your own mistake or the error message is wrong, always stick to the former. Again it sounds condescending, but hundreds of questions on this very site prove this advice extremely useful.
Note that in order to see PDO errors, you have to be able to see PHP errors in general. To do so, you have to configure PHP depends on the site environment:
on a development server it is very handy to have errors right on the screen, for which displaying errors have to be turned on:
error_reporting(E_ALL);
ini_set('display_errors',1);
while on a live site, all errors have to be logged, but never shown to the client. For this, configure PHP this way:
error_reporting(E_ALL);
ini_set('display_errors', 0);
ini_set('log_errors', 1);
Note that error_reporting should be set to E_ALL all the time.
Also note that despite the common delusion, no try-catch have to be used for the error reporting. PHP will report you PDO errors already, and in a way better form. An uncaught exception is very good for development, yet if you want to show a customized error page, still don't use try catch for this, but just set a custom error handler. In a nutshell, you don't have to treat PDO errors as something special but regard them as any other error in your code.
P.S.
Sometimes there is no error but no results either. Then it means, there is no data to match your criteria. So you have to admit this fact, even if you can swear the data and the criteria are all right. They are not. You have to check them again. I've short answer that would help you to pinpoint the matching issue, Having issue with matching rows in the database using PDO. Just follow this instruction, and the linked tutorial step by step and either have your problem solved or have an answerable question for Stack Overflow.
Some time ago I had the same problem of not seeing any error messages from mysql. After a research it turned out that the problem has got nothing to do with PHP itself, but with mysql server configuration. The default value of the variable lc_messages_dir pointed to non existing directory. After adding a line in mysqld.cnf, then restarted the mysql server, and finally I was able to see the error messages. For me the following was the right one:
lc_messages_dir=/usr/share/mysql
It is described in the mysql reference manual: https://dev.mysql.com/doc/refman/5.7/en/error-message-language.html
This is my PHP SQL statement and it's returning false while var dumping
$sql = $dbh->prepare('INSERT INTO users(full_name, e_mail, username, password) VALUES (:fullname, :email, :username, :password)');
$result = $sql->execute(array(
':fullname' => $_GET['fullname'],
':email' => $_GET['email'],
':username' => $_GET['username'],
':password' => $password_hash));
TL;DR
Always have set PDO::ATTR_ERRMODE to PDO::ERRMODE_EXCEPTION in your PDO connection code. It will let the database tell you what the actual problem is, be it with query, server, database or whatever. Also, make sure you can see PHP errors in general.
Always replace every PHP variable in the SQL query with a question mark, and execute the query using prepared statement. It will help to avoid syntax errors of all sorts.
Explanation
Sometimes your PDO code produces an error like Call to a member function execute() or similar. Or even without any error but the query doesn't work all the same. It means that your query failed to execute.
Every time a query fails, MySQL has an error message that explains the reason. Unfortunately, by default such errors are not transferred to PHP, and all you have is a silence or a cryptic error message mentioned above. Hence it is very important to configure PHP and PDO to report you MySQL errors. And once you get the error message, it will be a no-brainer to fix the issue.
In order to get the detailed information about the problem, either put the following line in your code right after connect
$dbh->setAttribute( PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION );
(where $dbh is the name of your PDO instance variable) or - better - add this parameter as a connection option. After that all database errors will be translated into PDO exceptions which, if left alone, would act just as regular PHP errors.
After getting the error message, you have to read and comprehend it. It sounds too obvious, but learners often overlook the meaning of the error message. Yet most of time it explains the problem pretty straightforward:
Say, if it says that a particular table doesn't exist, you have to check spelling, typos, letter case. Also you have to make sure that your PHP script connects to a correct database
Or, if it says there is an error in the SQL syntax, then you have to examine your SQL. And the problem spot is right before the query part cited in the error message.
You have to also trust the error message. If it says that number of tokens doesn't match the number of bound variables then it is so. Same goes for absent tables or columns. Given the choice, whether it's your own mistake or the error message is wrong, always stick to the former. Again it sounds condescending, but hundreds of questions on this very site prove this advice extremely useful.
Note that in order to see PDO errors, you have to be able to see PHP errors in general. To do so, you have to configure PHP depends on the site environment:
on a development server it is very handy to have errors right on the screen, for which displaying errors have to be turned on:
error_reporting(E_ALL);
ini_set('display_errors',1);
while on a live site, all errors have to be logged, but never shown to the client. For this, configure PHP this way:
error_reporting(E_ALL);
ini_set('display_errors', 0);
ini_set('log_errors', 1);
Note that error_reporting should be set to E_ALL all the time.
Also note that despite the common delusion, no try-catch have to be used for the error reporting. PHP will report you PDO errors already, and in a way better form. An uncaught exception is very good for development, yet if you want to show a customized error page, still don't use try catch for this, but just set a custom error handler. In a nutshell, you don't have to treat PDO errors as something special but regard them as any other error in your code.
P.S.
Sometimes there is no error but no results either. Then it means, there is no data to match your criteria. So you have to admit this fact, even if you can swear the data and the criteria are all right. They are not. You have to check them again. I've short answer that would help you to pinpoint the matching issue, Having issue with matching rows in the database using PDO. Just follow this instruction, and the linked tutorial step by step and either have your problem solved or have an answerable question for Stack Overflow.
Some time ago I had the same problem of not seeing any error messages from mysql. After a research it turned out that the problem has got nothing to do with PHP itself, but with mysql server configuration. The default value of the variable lc_messages_dir pointed to non existing directory. After adding a line in mysqld.cnf, then restarted the mysql server, and finally I was able to see the error messages. For me the following was the right one:
lc_messages_dir=/usr/share/mysql
It is described in the mysql reference manual: https://dev.mysql.com/doc/refman/5.7/en/error-message-language.html
I have problem with MySQL in PDI (Kettle). This error appears in process of reading information by Input Table. Even if all data is gived out of base successfully, this error appears and, probably, doesn't affect on transformation.
Error comitting connection
Communications link failure during commit(). Transaction resolution unknown.
Caused by: com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Communications link failure during commit(). Transaction resolution unknown.
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)...
Why this problem happens?
This is a MySQL error documented in a manual page with a nice title: My sql server has gone away.
Matt Casters (the main author of Kettle) gives a bunch of solutions on the Pentaho wiki which is not yet uploaded on Hitachi Vantara forum.
Matt's first solution is to increase the net_write_timeout. The default is 60 and he did increase it to 1800, mentioning that less may be sufficient.
In order to do this, edit the connection and select Options on the left panel.
Then write net_write_timeout in he Parameters column and 1800 as value.
I use a specific query that is acting weird: On my local environment, it works perfect and sends no warning. Online, the query itself works fine, however, mysqli_fetch_assoc($result) is producing the 'mysqli_fetch_assoc() expects parameter 1 to be mysqli_result, boolean given' warning.
I never occured a query that was causing this warning AND got the right info from the DB. This is why I tend to believe the problem is not in the code.
Is there a way to shut off the warnings only for this one specific query?
EDIT -
PROBLEM SOLVED.
it is really strange to me, but the problem was an incorrect script src path for dojo.js.
I have no idea what's the connection, but fixing the path prevented mysqli warnings.
You should be checking if $result == false before you call mysqli_fetch_assoc. Generally you catch it first by checking mysqli_connect_errno() but the general idiom is to proactively check before fetching rows