I have made my project with bootstrap, html and css. But the Github pages are only showing the readme file and sending me the error mail. Please help me, this project is important for me
First of all, index.html is missing from your repository.
If you have used only Bootstrap, CSS, and HTML, you probably don't even need npm. You can just upload your files (including those folders for images and CSS) and then go to your Repository Settings and in Github Pages, set the source. If you have an index.html, then <username>.github.io/repo-name will render it automatically after a successful build.
You might find this repository which was made using HTML, CSS, Bootstrap (and Javascript) helpful to refer to.
PS: Don't push node_modules on GitHub. You should ideally add that folder to .gitignore. These modules can be installed by the user who clones your repo using npm commands.
Related
I am using a jekyll template to build my website. I made all the changes locally and it runs all smoothly. However, when I push all the changes to github and open the github.io link, the front page is displayed differently. I am wondering what the possible problem is?
The difference is specifically the way that the front page of the website is displayed. Locally, it is supposed to show all the posts with "Page 1 out of 1". But on the github host it does not.
This is the github repository: https://github.com/BiostatisticsPodcast/BiostatisticsPodcast.github.io
Thank you guys in advance!
I tried to edit the config.yml file from scratch and it still does not show. I suspect the problem is in index.html but I cannot figure it out. :(
You publish your page from a branch. Under the hood, this uses the jekyll-build-pages action, with fixed versions for Jekyll and its dependencies. On top of that, the number of plugins is limited to a short list, which does not include the jekyll-archives plugin your theme requires, as the corresponding line in the config file indicates:
- jekyll-archives # Sorry, not GitHub pages friendly!
The solution is to switch to publishing with a GitHub Actions workflow. You can use the Jekyll starter workflow; follow the instructions here to set it up.
Whilst using Github Pages I can't get Jekyll to render a contact page.
I am using the following template: https://github.com/antonostrovsky/tale
If I clone the template into a local repo and run bundle exec jekyll serve I get a page with a Contact link that I can successfully follow. The generated _site folder contains a subfolder 'contact' with index.html within it.
I then create an empty repository (https://github.com/antonostrovsky/test_site) at Github and specify this template in _config.yml:
remote_theme: antonostrovsky/tale
The template is successfully rendered, I can see the template on the index page (https://antonostrovsky.github.io/test_site/), and the Contact link leads to nowhere, resulting in "Not Found" error.
Can anyone please help me understand how I can troubleshoot this? Does Jekyll have any debug output that could be placed on a github page?
Does anyone know what could be going wrong?
Thank you in advance
I made a diff between your repo and the template repo and noticed that at some stage you deleted the baseurl property in the _config.yml file.
Forking your repo and re-adding baseurl: "/tale" to the _config.yml file fixes the contact page link for me.
UPDATE:
While the above gets the page working as a fork it doesn't work as a remote template which is what the asker needs.
The test_site has the theme and it builds, however it has no content. There are no pages in test_site repo.
If you copy your contact.md page from the theme template repo into pages/contact.md in the test site repo and then rebuild then your link should now work.
Note: Neither the file nor folder can start with an _ in the test-site repo because it will get skipped over by jekyll.
Tip: Open the dev console and disable page caching then reload to see your changes on github faster. It also helps to add change some page content so that you know you're seeing the most recent version.
To add to the accepted answer and explain this strange behaviour. Pages from the remote theme are NOT included by design:
Custom theme files can be placed in:
assets/allposts.html
with the front matter
---
permalink: allposts.html
---
which results in the
_site/allposts.html
file being generated.
Source: https://github.com/benbalter/jekyll-remote-theme/issues/64
I forked this theme and created a simple pages, modified some css files - setting fonts for specific tags or disable italic on subheadings.
It works like a charm in local. But when I commit the files and push the repo, It shows contents but the design things are gone! I mean, It shows only html contents.
This is the page on local environment:
And this is the page on the remote server..?
I can use basic tags and change some properties of tags in CSS, but I don't know about more details.. Could you please give me some kinds of guide or how to fix this problem?
Edit -- Here is my git repository:
https://github.com/soldier4443/soldier4443.github.io
In _config.yml, remove baseurl: "/blog" to read baseurl: "".
FYI- if your theme is working locally but not working remotely(OP didn't have an issue with this, though this was my mistake), make sure that the remote repository is named .github.io
More info. from the official documentation: "GitHub Pages are initially configured to live under the username.github.io subdomain, which is why repositories must be named this way even if a custom domain is being used."
source: https://jekyllrb.com/docs/github-pages/
I am creating a blog on Jekyll for the first time and I am at the point where I'm trying to deploy what I have so far to github pages. When I serve the site and view it locally, it looks fine - so I thought that all I had to do was push all of the files to a gh-pages branch. Now that I have done this, all that is showing is the HTML.
To troubleshoot, I downloaded just the template files and pushed those to a Github page to see if the issue had to do with how I was editing the CSS, but when I did that I got the same results.
I came across an article that was specifically about how to use github pages to store a jekyll site, and it said to remove the slash before the css folder in the linked stylesheets on the HTML if your page isn't styled correctly. After reading that I thought that the slash was for sure the issue, but after removing the slash... I got the same result.
I have been trying for hours and I feel like its probably something very simple(such as the slash).
Here is the repo:
https://github.com/pacalabre/blog-site/tree/gh-pages
Here is the output:
http://pacalabre.github.io/blog-site/
Thank you in advance for any answers!
You need to add/edit:
baseurl: /blog-site
to the config file. Note there is no trailing slash. 'blog-site' is the name of your project, the project name becomes a sub directory that serves your site. Without the baseurl setting, your relative urls are trying to fetch things from http://pacalabre.github.io/ when they are really at http://pacalabre.github.io/blog-site/.
GH is serving your site as a subfolder to the domain and your references are not taking that into account.
Once you add the baseurl setting, you then need to add {{site.baseurl}} in front of your assets like images, css and js.
Also, once you do the baseurl setting, when you serve locally it will not be quite correct, you will need to add the /blog-site to the end of the localhost url for it to work properly.
You also should try using the dev tools inspector in Chrome to help you troubleshoot, it will clearly tell you right now that it cannot load all your js files or images, and it will show where it is trying to load them from.
Look, there's something wrong with your site/repo.
I didn't find your _config.yml at the site root ( gh-pages branch). It should be there.
There's a binary file there (probably Mac's file if I'm not mistaken). It shouldn't be there.
There are both Jekyll's folders (_posts, _drafts, _layouts, etc) and _site folder there. You need to choose. Or you upload the _site content (not the folder itself) or you upload the Jekyll project. Usually you upload just Jekyll folders and GH build the site for you, unless you use some plugins which are not allowed by GitHub. In this case, you upload just the _site content, which is the compiled site (html, CSS, js only).
On the previous answer, you were instructed to add a baseurl to your site configuration. It's the best approach, but if your template uses just url and doesn't even mention baseurl, the best way is adding the project name to the end of the url, not searching for every link to call {{ site.baseurl }} via liquid. So, instead of giving yourself all this trouble, better do like that in your _config.yml:
url: http://username.github.io/projectname
If you indeed go for setting up the baseurl, you can view your site locally via localhost:4000 by adding this flag when serving Jekyll: --baseurl "". So, jekyll serve --watch --baseurl "". This means like "Jekyll, ignore the baseurl set in the config". Got it?
Serving Jekyll with bundler is the right way to do that, specially when deploying to GH Pages. But this is another story, I can add a comment later if you're interested.
Suggestions. Read a little more about how Jekyll works. Also look for .gitignore so you won't upload to GH anything unnecessary (like that binary file).
After that, if your site doesn't build or display correctly, let me know and I'll help you out if you want.
Hope to have helped!
I have set up my professional website/homepage using Github Pages. I know if this was just HTML being served up from somewhere, my downloadable file would need to be in the directory of my .html file, and then I could reference it in the .html file and link it up. However, since this is served by Github through repository, I am unsure on how to do this.
Do I put my downloadable file in my repo under version control like the rest of the project?
If so, what path do I use in the .html file?
Also, I am aware that the Automatic Page Generator makes it possible to hardly touch the HTML, but it seems pretty restrictive as far as customizing where links and other content appears on your page...
You could just link it normally in your html. Commit it to your repository and have users right click to save.
I just tried this on one of my repositories where I put a link to my CSS file.
style.css
I was able to right click the link and download the file.
If you wanted to create a download from the root you would do:
Download File
I'm pushing my repositories manually instead of using the Automatic Page Generator. The steps are pretty straight forward Creating Project Pages Manually - GitHub Help
Since it is done in GitHub pages. It can also be done like this (in markdown fashion): [download]({{ site.baseurl }}{% link file.txt %}). It has the advantage to work locally without pushing the file to the repo.