We have many subscriptions and sometimes one fails with an error like the following. It was bearable, but now it is ervery day for many times.
Even though the LastRunTime of the subscription was:
2020-10-26 09:41:55.827
Ther error states a differen datetime:
Failure sending mail: Syntax error, command unrecognized.
The server response was: 5.3.3 Unrecognized command '16.Oct.2020'Mail will not beresent.
--> 16.Oct.2020
Sometimes a report subscription runs successfully and a few minutes later it fails with that error.
If I change the schedule time and restart the job for the subscriptionID the sending succeeds. And later it can fail again.
Can please anyone help fixing this?
Related
I am working on lift and shift SSIS packages through ADF. Setup have been done properly but when I trigger the activity in ADF, I see this error "Package execution failed. For more details, select the output of your activity run on the same row". How to resolve this error?
Going through the official MS docs, I can see the below error documented. Can you try as suggested.
Error message: "Staging task failed. TaskStatus: Failed, ErrorCode: 2906, ErrorMessage: Package execution failed. For more details, select the output of your activity run on the same row., Output: {"OperationErrorMessages": "4/14/2021 7:10:35 AM +00:00 : = Failed to start Named pipe proxy... "
Check if security policies are correctly assigned to the account
running self-hosted IR service. If Windows authentication is used on
Execute SSIS Package activity or the execution credential is set in
SSIS catalog (SSISDB), the same security policies must be assigned to
the Windows account used. More detail can be found at Configure
Self-Hosted IR as a proxy for Azure-SSIS IR in
ADF
I am trying to use the ForgeApp with Revit. For the same I am trying to execute the workitem from Postman. During the execution I am getting below error.
An unexpected error happened during phase Publishing of job.
The parts of the actual report (after removing some of the sensitive info) is as follows:
[10/15/2020 05:45:24] Finished running. Process will return: Success
[10/15/2020 05:45:24] ====== Revit finished running: revitcoreconsole ======
[10/15/2020 05:45:25] End Revit Core Engine standard output dump.
[10/15/2020 05:45:25] End script phase.
[10/15/2020 05:45:25] Start upload phase.
[10/15/2020 05:45:25] Error: Non-optional output [result.json] is missing.
[10/15/2020 05:45:25] Error: An unexpected error happened during phase Publishing of job.
[10/15/2020 05:45:25] Job finished with result FailedMissingOutput
[10/15/2020 05:45:25] Job Status:
From the error it is clear that the Plugin has failed in processing but it gives give much idea as to why it has failed . After receiving this error, I tried to debug locally by following https://forge.autodesk.com/blog/design-automation-debug-revit-plugin-locally
But during debugging it is failing with below error while Executing the Plugin itself. It executes the Onstartup without any issues but after that it is not going in HandleDesignAutomationReadyEvent.
Managed Debugging Assistant 'FatalExecutionEngineError' : 'The runtime has encountered a fatal error. The address of the error was at 0xdb9b8a8d, on thread 0x3784*
So I am not sure what to ahead to resolve this. If I can get this working somehow in the Local with Debugger or through Postman then it would help.
Further update - I have now found the root cause. Even though it was complaining about the missing output file leading me to believe the code was not running properly, the actual root cause was that it was not finding the model from the inputFile parameter. This became clear once I tried putting Console.Write in the Plugin code and then debugging became easy. I wasn't sure Console would be printed in the output at first and hence turned the debug logs off at first . But as I didn't have any other means to have the verbose logging , I put in lots of Console write and now got to know the root cause. Thanks
im getting this error, which i try to find why and what happened Suddenly:
and more importantly how to debug such an error .
what this line means :
Error The read operation failed, see inner exception.
where is this : inner exception?
020-09-30T18:47:22.0199830Z ##[section]Starting: Initialize job
2020-09-30T18:47:22.0201330Z Agent name: 'Hosted Agent'
2020-09-30T18:47:22.0201750Z Agent machine name: 'Mac-1601490664598'
2020-09-30T18:47:22.0202040Z Current agent version: '2.175.2'
2020-09-30T18:47:22.0219900Z Current image version: '20200904.1'
2020-09-30T18:47:22.0229850Z Agent running as: 'runner'
2020-09-30T18:47:22.0293150Z Prepare build directory.
2020-09-30T18:47:22.0595770Z Set build variables.
2020-09-30T18:47:22.0631220Z Download all required tasks.
2020-09-30T18:47:22.0751440Z Downloading task: CmdLine (2.164.2)
2020-09-30T18:48:02.2372880Z Downloading task: UseRubyVersion (0.165.2)
2020-09-30T18:48:48.2651220Z Downloading task: DownloadBuildArtifacts (0.167.2)
2020-09-30T18:51:03.2405560Z ##[warning]Failed to download task 'DownloadBuildArtifacts'. Error The read operation failed, see inner exception.
2020-09-30T18:51:03.2423990Z ##[warning]Inner Exception: {ex.InnerException.Message}
2020-09-30T18:51:03.2428450Z ##[warning]Back off 23.799 seconds before retry.
2020-09-30T18:53:07.4698560Z ##[warning]Failed to download task 'DownloadBuildArtifacts'. Error The read operation failed, see inner exception.
2020-09-30T18:53:07.4701220Z ##[warning]Inner Exception: {ex.InnerException.Message}
2020-09-30T18:53:07.4704340Z ##[warning]Back off 13.329 seconds before retry.
2020-09-30T18:57:08.7191850Z ##[error]The read operation failed, see inner exception.
2020-09-30T18:57:08.7198800Z ##[section]Finishing: Initialize job
You are not the only one who encountered this interruption, see this post.
I reviewed our internal service telemetry log, the issue you encountered should caused by our service event. https://status.dev.azure.com/_history
There were some exception occurred on our backend start from 15:23:27 CST, which make you encountered pipeline interruption.
how to debug such an error
As normal, it's hard for users to check the inner exception if you are using hosted pool. The detailed exception messages are recorded in our backend telemetry log. You can contact our team by clicking on Report outage button mentioned below if you are blocked again in the future and would like to know the details message about it:
Since the event has been mitigated now, I'm sure your pipelines will work fine if you re-run the pipeline now.
I am getting the following error when running scans on several GitHub repositories. It does not seem to occur on the same repository whenever I run the scan job. I saw the other post that seemed related to this and would have added my question to that thread but was not allowed to comment on it. this error is stopping my Jenkins job from continuing so we are basically stalled with our scan progress.
Error details:
Fail to process request localhost:8081/api/ce/submit?projectKey=KEY:Name&projectName=Name&projectBranch=branch org.apache.ibatis.exceptionsPersistenceException: ###Error updating database. Cause: com.mysql.jdbc.exceptions.jdbc4.MySQLIntegrityConstraintViolationException: Duplciate entry '12-24334'admin' for key 'uniq_group_roles' ### This error may invovle org.sonar.db.user.RoleMapper.insertGroupRole-Inline ### This error occurred while setting parameters ### Cause: com.mysql.jdbc.exceptions.jdbc4.MySQL
I have an instance of mediawiki installed with an extension called Confirm Account. This works fine on my MAMP setup at home. On my MediaTemple.net account I get this error when the extension is run:
Error sending mail:Unknown error in PHP's mail() function.
The server error log error is:
qmail-inject: fatal: unable to parse this line: Return-Path:apache# 216.70.110.23:7081
I have no idea what to do to fix this.
Thank you.
Set $wgPasswordSender to some meaningful email address.