This is the API ulr response. I want to print the Status value(php). I have coded everything. Getting responses in mt page. I dont need the Curl coding. I wrote all. I just not able to access the "status". The "domain.com" is dynamic.
{"domain.com":{"classkey":"domcno","status":"available"}}
json_decode('{"domain.com":{"classkey":"domcno","status":"available"}}');
Will give you:
object(stdClass)#4 (1) {
["domain.com"]=>
object(stdClass)#3 (2) {
["classkey"]=>
string(6) "domcno"
["status"]=>
string(9) "available"
}
}
Since your property (domain.com) is dynamic you can do something like this to convert it to an array (use array_values to change array key to index).
$data = array_values((array) json_decode('{"domain.com":{"classkey":"domcno","status":"available"}}');
$status = $data[0]->status; // 'available'
Related
How can I get the id of an object?
In this example I want to get the 'ok' and store it in a variable.
I know how to access the data.I need to access the id and store it for some purpose.
I use Angular so the console log is like this
'console.log (this.Data');'
{ok: Array(2)}
ok: Array(2)
.
.
.
Always depends in your JSON structure but if you want the object inside the 'ok' key you can access through the key, for example:
{
"ok": Array(2)
}
You can access with the key associated at the object:
this.Data.ok;
this.Data[ok];
Ok i find the solution.I changed the object.I set an 'id' and a 'data' field.Now i can access it like this.Data.id and this.Data.data.
You can get every key from your JSON with Object.keys.
Object.keys(this.data)
I have a request that I make in an API using GET
LWP::UserAgent,
the data is returned as JSON, with up to two results at most as follows:
{
"status":1,
"time":1507891855,
"response":{
"prices":{
"nome1\u2122":{
"preco1":1111,
"preco2":1585,
"preco3":1099
},
"nome2":{
"preco1":519,
"preco2":731,
"preco3":491
}
}
}
}
Dump:
$VAR1 = {
'status' => 1,
'time' => 1507891855,
'response' => {
'prices' => {
'nome1' => {
'preco1' => 1111,
'preco3' => 1099,
'preco2' => 1585
},
'nome2' => {
'preco3' => 491,
'preco1' => 519,
'preco2' => 731
}
}
}
};
What I would like to do is:
Take this data and save it in a variable to make a comparison using if with another variable that already has the name stored. The comparison would be with name1 / name2 and if it is true with the other variable it would get preco2 and preco3 to print everything
My biggest problem in the case is that some of these names in JSON contain characters like (TradeMark) that comes as \u2122 (some cases are other characters), so I can not make the comparison with the name of the other variable that is already with the correct name
nome1™
If I could only save the JSON already "converted" the characters would help me with the rest.
Basically after doing the request for the API I want to save the contents in a variable already converting all \u2122 to their respective character (this is the part that I do not know how to do in Perl) and then using another variable to compare them names are equal to show the price
Thanks for the help and any questions please tell me that I try to explain again in another way.
If I understand correctly, you need to get the JSON that you receive in UTF8 format to an internal variable that you can process. For that, you may use JSON::XS:
use utf8;
use JSON::XS;
my $name = "nome1™";
my $var1 = decode_json $utf8_encoded_json_text;
# Compare with name in $name
if( defined $var1->{'response'}->{'prices'}->{$name} ) {
# Do something with the name that matches
my $match = $var1->{'response'}->{'prices'}->{$name};
print $match->{'preco1'}, "\n";
}
Make sure you tell the Perl interpreter that your source is in UTF8 by specifying use utf8; at the beginning of the script. Then make sure you are editing the script with an editor that supports that format.
The function decode_json will return a ref to the converted value. In this case a hash ref. From there you work your way into the JSON.
If you know $name is going to be in the JSON you may omit the defined part. Otherwise, the defined clause will tell you whether the hash value is there. One you know, you may do something with it. If the hash values are a single word with no special characters, you may use $var1->{response}->{prices}->{$name}, but it is always safer to use $var1->{'response'}->{'prices'}->{$name}. Perl gets a bit ugly handling hash refs...
By the way, in JSON::XS you will also find the encode_json function to do the opposite and also an object oriented interface.
I need value from MySQL send into PLC via OPC UA (in NODE-RED). Everything works ok, but I don't know how to get pure value without descriptions of array etc.
I use this code:
SELECT `user_info` FROM `users` WHERE `user_name` LIKE 'Lukas'
The answer is:
array[1]
0: object
user_info: "6"
If I send it to PLC as STRING the value in PLC is:
[object Object]
Can I edit the code somehow? I need answer only:
6
Thank you
The answer is array[1] 0: object user_info: "6"
I assume you've copied that out of the Debug window which shows you the exact structure of the payload you've received.
That is saying, the payload is an array with a single element. That element is an object with a user_info property of value 6.
In other words:
[
{
"user_info": "6"
}
]
In which case, to access the value you would use:
msg.payload[0].user_info
For example, a Function node to pull that value out and put it into the payload would be:
msg.payload = msg.payload[0].user_info;
return msg;
Or you could use a Change node to set the value of msg.payload to the value of msg.payload[0].user_info.
I'm using Postman to make REST API calls to a server. I want to make the name field dynamic so I can run the request with a unique name every time.
{
"location":
{
"name": "Testuser2", // this should be unique, eg. Testuser3, Testuser4, etc
"branding_domain_id": "52f9f8e2-72b7-0029-2dfa-84729e59dfee",
"parent_id": "52f9f8e2-731f-b2e1-2dfa-e901218d03d9"
}
}
In Postman you want to use Dynamic Variables.
The JSON you post would look like this:
{
"location":
{
"name": "{{$guid}}",
"branding_domain_id": "52f9f8e2-72b7-0029-2dfa-84729e59dfee",
"parent_id": "52f9f8e2-731f-b2e1-2dfa-e901218d03d9"
}
}
Note that this will give you a GUID (you also have the option to use ints or timestamps) and I'm not currently aware of a way to inject strings (say, from a test file or a data generation utility).
In Postman you can pass random integer which ranges from 0 to 1000, in your data you can use it as
{
"location":
{
"name": "Testuser{{$randomInt}}",
"branding_domain_id": "52f9f8e2-72b7-0029-2dfa-84729e59dfee",
"parent_id": "52f9f8e2-731f-b2e1-2dfa-e901218d03d9"
}
}
Just my 5 cents to this matter. When using randomInt there is always a chance that the number might eventually be present in the DB which can cause issues.
Solution (for me at least) is to use $timestamp instead.
Example:
{
"username": "test{{$timestamp}}",
"password": "test"
}
For anyone who's about to downvote me this post was made before the discussion in comments with the OP (see below). I'm leaving it in place so the comment from the OP which eventually described what he needs isn't removed from the question.
From what I understand you're looking for, here's a basic solution. It's assuming that:
you're developing some kind of script where you need test data
the name field should be unique each time it's run
If your question was more specific then I'd be able to give you a more specific answer, but this is the best I can do from what's there right now.
var counter = location.hash ? parseInt(location.hash.slice(1)) : 1; // get a unique counter from the URL
var unique_name = 'Testuser' + counter; // create a unique name
location.hash = ++counter; // increase the counter by 1
You can forcibly change the counter by looking in the address bar and changing the URL from ending in #1 to #5, etc.
You can then use the variable name when you build your object:
var location = {
name: unique_name,
branding_domain_id: 'however-you-currently-get-it',
parent_id: 'however-you-currently-get-it'
};
Add the below text in pre-req:
var myUUID = require('uuid').v4();
pm.environment.set('myUUID', myUUID);
and use the myUUID wherever you want
like
name: "{{myUUID}}"
It will generate a random unique GUID for every request
var uuid = require('uuid');
pm.globals.set('unique_name', 'testuser' + uuid.v4());
add above code to the pre-request tab.
this was you can reuse the unique name for subsequent api calls.
Dynamic variable like randomInt, or guid is dynamic ie : you donot know what was send in the request. there is no way to refer it again, unless it is send back in response. even if you store it in a variable,it will still be dynamic
another way is :
var allowed = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789";
var shuffled_unique_str = allowed.split('').sort(function(){return 0.5-Math.random()}).join('');
courtsey refer this link for more options
I tried to populate google chart datatable in server side using PHP.I got JSON file properply, but the Chart not display in client Application. I got error-Data column(s) for axis #0 cannot be of type string . My coding is below here.
After fetching data from database,
$colarray=array(array("id"=>"","label"=>"userid","pattern"=>"","type"=>"number"),array("id"=>"","label"=>"name","pattern"=>"","type"=>"string"));
$final=array();
for($i=0;$i<$rows;$i++)
{
$id[$i]=pg_fetch_result($res1,$i,'id');
$name[$i]=pg_fetch_result($res1,$i,'name');
$prefinal[$i]=array("c"=>array(array("v"=>$name[$i]),array("v"=>$name[$i])));
array_push($final,$prefinal[$i]);
}
$table['cols']=$colarray;
$table['rows']=$final;
echo json_encode($table);
My Output Json:
{
"cols":[
{"id":"","label":"userid","pattern":"","type":"number"},
{"id":"","label":"name","pattern":"","type":"string"}
],
"rows":[
{"c":[{"v":"101"},{"v":"Aircel"}]},
{"c":[{"v":"102"},{"v":"Srini"}]},
{"c":[{"v":"103"},{"v":"Tamil"}]},
{"c":[{"v":"104"},{"v":"Thiyagu"}]},
{"c":[{"v":"105"},{"v":"Vasan"}]},
{"c":[{"v":"107"},{"v":"Senthil"}]},
{"c":[{"v":"108"},{"v":"Sri"}]},
{"c":[{"v":"109"},{"v":"Docomo"}]},
{"c":[{"v":"106"},{"v":"Innodea"}]}
]
}
How to solve this issue?
To extend on #sajal's accurate answer: Change the last line of your code from:
echo json_encode($table);
to:
echo json_encode($table, JSON_NUMERIC_CHECK);
This will tell json_encode to recognize numbers and abstain from wrapping them in quotes (Available since PHP 5.3.3.).
http://php.net/manual/en/json.constants.php#constant.json-numeric-check
You specify type of userid as number... but pass string.. thats causing the problem.
I just wasted 30 mins with the opposite problem ...
Your output json should look like :-
{
"cols":[
{"id":"","label":"userid","pattern":"","type":"number"},
{"id":"","label":"name","pattern":"","type":"string"}
],
"rows":[
{"c":[{"v":101},{"v":"Aircel"}]},
{"c":[{"v":102},{"v":"Srini"}]},
{"c":[{"v":103},{"v":"Tamil"}]},
{"c":[{"v":104},{"v":"Thiyagu"}]},
{"c":[{"v":105},{"v":"Vasan"}]},
{"c":[{"v":107},{"v":"Senthil"}]},
{"c":[{"v":108},{"v":"Sri"}]},
{"c":[{"v":109},{"v":"Docomo"}]},
{"c":[{"v":106},{"v":"Innodea"}]}
]
}
On a BarChart, one of the columns (the second one) has to be a number. That can cause this error message.
In your drawChart() function, you are probably using google.visualization.arrayToDataTable, and this does not allow any nulls. Please use addColumn function explicitly
If the Data format should be like:
data: [
["string", "string"], //first Column
["string1", number],
["string2", number],
["string3", number],
]
then you can overcome this error.
when you are passing your data from controller you need to do like so: just take an example I have controller and I am sending data through it via group by.
controller:
\DB::statement("SET SQL_MODE=''");//this is the trick use it just before your query
$Rspatients = DB::table('reports')
->select(
DB::raw("day(created_at) as day"),
DB::raw("Count(*) as total_patients"))
->orderBy("created_at")
->groupBy(DB::raw("day(created_at)"))
->get();
$result_patients[] = ['day','Patients'];
foreach ($Rspatients as $key => $value) {
$result_patients[++$key] = [$value->day,$value->total_patients];
}
return view('Dashboard.index')
->with('result_patients',json_encode($result_patients,JSON_NUMERIC_CHECK));
if there is no JSON_NUMERIC_CHECK, so the data will be array of strings while if there is json check the data will be converted to array of numbers.
before JSON check data:
4: (2) ["24", "413"]
5: (2) ["25", "398"]
After JSON Check data:
4: (2) [24, 413]
5: (2) [25, 398]