setup: i3wm, fedora 31
I am facing this issue, in which some rpm's even after being installed,
For e.g. I have Bluejeans installed, but when I try running the app, it results in command not found, the baffling part being I have no such issue opening it in gnome.
$ rpm -qa | grep -i bluejeans
bluejeans-v2-2.0.0-188.x86_64
$ bluejeans
zsh: bluejeans: command not found...
same goes when I try accessing using dmenu.
solved the issue, bluejeans was not getting installed in /usr/bin or any other similar paths.
rpm -ql bluejeans
package bluejeans is not installed
while they also named package as bluejeans-v2 which made it harder to search, while in gnome I could start using bluejeans even from the terminal.
solution:
create a symlink to /usr/bin where you have bluejean-v2 installed
ls -s /usr/bin/bluejean-v2 ${install_path}/bluejeans-v2
Related
on running django-server with django==1.9 and pgsql 9.5, virtualenv=15.0.9 with python2.7 installation no-wheel no-site-packages on ubuntu 14.04
no previous mysql installation prior mariadb==10.2 after which this error occured. tried purging mariadb then, installing mysql=5.6 from dpkg but it didn't solved it either, then reinstalled mariadb==10.2 for sudo apt-get install libmariadbclient but it didn't solved it either.
Any help would be appreciated, ....
getting the below error
Solved.
a gis plugin was being used in my project postgis and postgres used in project.
for that the very initial postgres installation must have put libmysqlclient_18 version defined by its own customizations.
after mariadb installation, the libmysqlclient.so.18 should have been updated, hindering the older linkage and setups.
ran the mysql/mariadb cleaning with this post
https://askubuntu.com/a/172516/735971
installed mariadb again, got the gis support and issue is resolved.
link to gis support libraries:
http://scigeo.org/articles/howto-install-latest-geospatial-software-on-linux.html
update:
got another error during running django server with postgresql==9.5 and postgis==2.2
Could not find the GEOS library (tried "geos_c", "GEOS"). Try setting GEOS_LIBRARY_PATH in your settings.
traced to evidence that mariadb-common files and libmysqlclient/libmariadblclient was still cached in apt-get
evertime I installed postgresql or any of its extension now, it used the cached copy of libmysqlclient.so.18 from mariadb.
so I removed all the unused dpkg configs
sudo dpkg --purgeCOLUMNS=300 dpkg -l "" | egrep "^rc" | cut -d\ -f3
CAUTION: it can remove all the unused package, for only mariadb related files you can do
sudo dpkg --purgeCOLUMNS=300 dpkg -l "maria" | egrep "^rc" | cut -d\ -f3
Also removed postgresql for the next clean installation overriding any traces of compiled libmysqlclient if any.
then removed any apt-repo related to mariadb from /etc/apt/sources.list followed by sudo apt-get update.
then apt-get autoremove and apt-get clean to clean everything.
then sudo apt-get install -y postgresql-9.5 postgresql-9.5-postgis-2.2 postgresql-9.5-pgrouting postgresql-contrib-9.5
but i must say mariadb V10.2 still clashes with other installations and system libraries like it clashed in prior versions for libmysqlclient.so
I have tried to install MYSQL 5.6.29 on Linux Centos and installed file "MySQL-shared-5.6.29-1.linux_glibc2.5.x86_64" but i found its wrong file which i have installed. Now when i am trying to install correct file "MySQL-shared-5.6.29-1.el6.x86_6" then getting below error.
/usr/share/doc/MySQL-shared-5.6.29/README from install of MySQL-shared-5.6.29-1.el6.x86_64 conflicts with file from package MySQL-shared-5.6.29-
1.linux_glibc2.5.x86_64
My installation was incomplete and only able to install 3 rpm packages. I run "yum remove mysql" but its un-install only one package please guide me to find & un-install MYSQL related packages.
issue fixed through these commands:
rpm -qa|grep -i SQL -- find installed rpm packages
rpm -e -- find installed package and then place the package name
rpm -i package_name.rpm -- to install packages
yum remove mysql-libs
I am trying to solve problem installing XMind 3.6.0 RPM on Fedora 23.
I have downloaded the .deb package from XMind webpage.
Than, I have converted it to RPM package with Alien, to be able to install it on Fedora with help of this manual.
sudo alien -r -c xmind-3.6.0-2.x86_64.deb
and than install the generated RPM package
sudo rpm -ivh xmind-3.6.0-2.x86_64.rpm
but I keep getting the error message:
Preparing... ################################# [100%]
file /usr/bin from install of xmind-3.6.0-2.x86_64 conflicts with file from package filesystem-3.2-35.fc23.x86_64
file /usr/lib from install of xmind-3.6.0-2.x86_64 conflicts with file from package filesystem-3.2-35.fc23.x86_64
Does anybody know, how to resolve this conflict?
Thanks,
shimon
I was unable to solve the error described in my post. However, I have found a way to install XMind 7 (3.6.0) on Fedora 23.
Following this page.
The problem is, the xmind binaries structure has changed since this article. So the commands needed are little bit different.
Download Xmind portable version from Xmind web page - http://www.xmind.net/xmind/downloads/xmind7-portable-3.6.0.R-201511090408.zip
Extract it to directory ~/xmind_portable, then cd ~/xmind_portable
Untar the data.tar.gz tar -xf data.tar.gz
Move desktop launcher sudo mv ./usr/share/applications/xmind.desktop /usr/share/applications
sudo mv ./usr/share/mime/packages/xmind.xml /usr/share/mime/packages/
Move application data sudo mv ./usr/lib/xmind/ /opt/
Update mime DB sudo update-mime-database /usr/share/mime/
Make a link to your bin
sudo ln -s /opt/xmind/XMind /usr/local/bin/xmind
Then use it!
xmind
I seem to be having an issue getting MySQL 5.6.1.5 to install from Source. I am running RHEL 6.
I was able to perform the cmake, make, and make install without issues.
I am attempting to run the mysql_install_db binary and when I do I get the following error:
Fatal ERROR: Could not find ./bin/my_print_defaults
If you compiled from source, you need to run 'make install' to copy the software
into the correct location ready for operation.
If you are using a binary release, you must either bat at the top level of the
extracted archive, or pass the --basedir option pointing to that location.
So I did a check for my_print_defaults using which my_print_defaults, unfortunately it was not found on my machine.
I did a locate my_print_defaults as well just for the heck of it and said it was located in /usr/bin/my_print_defaults, however, when I checked /usr/bin for the binary, it was not actually there.
I would try to use mysql_install_db --basedir=/usr/bin but I know this won't work as the which and locate commands confirm my_print_defaults isn't on my machine.
I looked at mysql_install_db giving error, but that error was not similar to this one.
Please ignore question, I didn't bother to try running find / -name my_print_defaults and found it in /usr/local/mysql/bin/
I searched packages for my_print_defaults with
apt-file search my_print_defaults
If my_print_defaults is missing on your system (which my_print_defaults), first find out which db is installed with:
dpkg -l |grep -E 'maria|mysql'|grep ii|grep server
If you have installed mariadb, try reinstall mariadb:
sudo apt install --reinstall mariadb-server-core-10.1
If you don't find a solution with mariadb, swap back to mysql with
sudo apt install mysql-server
I'm trying to install MySQL 5.6 on Debian.
Here what I do:
sudo dpkg -i mysql-5.6.12-debian6.0-i686.deb
cd /usr/local
ln -s /opt/mysql/server-5.6 mysql
cd mysql
scripts/mysql_install_db.sh --user=mysql --datadir=/var/lib/mysql
And this is the error that I get:
FATAL ERROR: Could not find #bindir#/my_print_defaults
If you compiled from source, you need to run 'make install' to
copy the software into the correct location ready for operation.
If you are using a binary release, you must either be at the top
level of the extracted archive, or pass the --basedir option
pointing to that location.
Could you please suggest something? I'm installing MySQL from scratch (previous version was completely removed).
Thanks.
I might not be able to help with the error you're getting. But apt-get install -f mysql-server-5.5 worked for me on Debian Wheezy. Try replacing 5.5 with 5.6 and see if it works as well, and probably precede it with sudo.