I need to do
FREE PLACE ON DISC O: ({ITEM.LASTVALUE}) FROM (total disk space)
Trigger expression
{sql01:vfs.fs.size[O:,free].last(0)}<21474836480
Thanks in advance!
Assuming you need to see the used/total space in the trigger title, there's no need to put that information in the trigger itself: starting from Zabbix 4.4, it's available as an optional information/column in the Problems page:
It's "none" by default, but can be selected separately or within problem name:
The part highligthed in green is added:
See the documentation for: operational_data_of_problems
Related
Not sure if this is a good place to ask but I’m about an hour into editing a Sharepoint for the first time, have zero prior knowledge on creating/editing Sharepoints, and I’m stuck trying to figure out how to wrap text to a new line in the description field of a particular column on my list.
We need the submitters to stop at a certain point and not touch the remaining fields, and the only way I can figure out how to do that is by adding a column description that tells them to stop. I want the description of that column to read as:
————-—STOP ————-—
Submitters stop here. Do not use the fields below, unless attaching images/files. The remaining fields are for macro champ use only.
———————————————-
Instead of :
————-—STOP ————-—Submitters stop here. Do not use the fields below, unless attaching images/files. The remaining fields are for macro champ use only.———————————————-
Do I need to use JSON to achieve this? If so..what is the code I would need to use?
Also open to alternative solutions to create a line/stop/hide fields from them or something.
——————
ETA - photo of what my column formatting box looks like.
——————
ETA for further clarification -
The column in particular that I am trying to add the “stop” message to is actually named “Attachments included?” And has ‘yes’ or ‘no’ radio choice buttons. Then the description underneath that column says “submitters stop here, unless attaching images/files below.” This column, and it’s description, are hidden from the list overview and only visible when submitting a +New item.
The reason for doing this is because we have a handful of fields towards the end of the +New item submission form that we don’t want submitters to touch, as they are for the help desk agents to fill out only.
I don’t see any other way to add a stop/line or hide certain fields from the submitters (while still leaving them visible to the help desk team), so just trying to make this “stop” description look a little neater.
Format the column as shown below:
{
"$schema": "https://developer.microsoft.com/json-schemas/sp/v2/column-formatting.schema.json",
"elmType": "div",
"txtContent": " ————-—STOP ————-— \n\n Submitters stop here. Do not use the fields below, unless attaching images/files. The remaining fields are for macro champ use only. \n\n ———————————————",
"style": {
"width": "100%",
"font-weight": "bold"
}
}
Update:
I would like to add custom auto-complete key bindings much like built-in:
Example: html+tab auto-completes the Doctype Block.
I tried adding html custom key binding: type c + o + l + tab to generate <div class="col-">
Preferences > Key Bindings > Default (OSX).sublime-keymap -- User
{"keys": ["c+o+l+tab"], "command": "insert_snippet", "args": {"contents": "<div class=\"col-$0\">"}},
However, two issues:
the new key binding overrides all other auto completes
the initial col or characters remains in front of the
generated tag. col<div class="col-">
What is the correct way to add this type of key binding?
The correct way to do something like this is to use either snippets or completions. Although there are some differences, generally speaking they both work the same way in the end, and which one you choose depends on how many such items you want to create and how complex you want them to be.
Using a snippet, you would select Tools > Developer > New Snippet... from the menu and fill out the snippet template, then save it as a sublime-snippet file in the location that Sublime defaults to (which is your User package).
For example, that might look like the following based on the example in your question:
<snippet>
<content><![CDATA[
<div class="col-$0">
]]></content>
<description>Insert DIV with column class</description>
<tabTrigger>col</tabTrigger>
<scope>text.html</scope>
</snippet>
Snippets are XML formatted, and everything between ![CDATA[ and ]] is inserted into the buffer (don't remove the CDATA even if you think you don't need it; Sublime will ignore the snippet if you do).
The tabTrigger specifies the text that you want to be the trigger for the snippet, the scope says what sort of files the snippet should trigger in, and the description will be displayed next to the snippet in the auto-completions panel.
In a snippet, the tabTrigger, scope and description are all optional. If you don't specify a tabTrigger you can only expand the snippet from the Command Palette or via the insert_snippet command (for example in a key binding). Without a scope the snippet applies everywhere, and without description it has no description in the panel.
If you have many such items that you want to add snippets for, you can also use completions instead. These are stored in JSON files with an extension of sublime-completions and should be saved in your User package (use Preferences > Browse Packages... if you don't know where that is.
An example of such a file would be:
{
"scope": "text.html",
"completions": [
{ "trigger": "col\tInsert DIV with column class", "contents": "<div class=\"col-$0\">" },
]
}
In this format, the trigger is always the text to trigger and the description (still optional) is separated from the trigger by a \t character in the trigger key.
In completions you only specify the scope once at the top instead of every time, but there are some functional differences between completions and snippets.
There can only be one snippet per sublime-snippet file, but a sublime-completions file can contain many completions in a single file; the completions key is an array so you can place more than one completion in the same file.
Completions are JSON, so contents that are multi line or contain JSON specific characters such as a " character are harder to enter; completions are better for shorter sequences while snippets are better for more complex things.
When autocomplete triggers, if there is a completion and a snippet that could be autocompleted, snipptets always "win" and are inserted, whereas completions cycle. That means that for example in this particular example you need to press Tab twice because col is also the name of a tag.
Snippets automatically appear in the command palette (when they apply) but completions do not. In the command palette, Snippets appear as commands like Snippet: Something, where Something is the description if it exists and the name of the file if it does not.
In either case, you can make the snippet/completion apply only in certain types of files by applying a scope; to determine the appropriate scope, position the cursor in a file at the appropriate place and select Tools > Developer > Show Scope Name...; the more of the displayed scope you use the more specific it becomes. Generally just the top level such as text.html is all that's needed unless you're doing something special.
We are using the following code (generated by php but finally this is on client side)
c3.generate({'bindto':'#b65d3422__salestaffcommunication_xepan_base_view_chart_chart','data':{'keys':{'x':'name','value':['Email','Call','Meeting']},'groups':[['Email','Call','Meeting']],'json':[],'type':'bar'},'axis':{'x':{'type':'category'},'rotated':true},'onrendered':function(ev,ui){$(".widget-grid").masonry({'itemSelector':'.widget'})}});
c3.generate({'bindto':'#f67e14d8__t_masscommunication_xepan_base_view_chart_chart','data':{'keys':{'x':'name','value':['Newsletter','TeleMarketing']},'groups':[['Newsletter','TeleMarketing']],'json':[],'type':'bar'},'axis':{'x':{'type':'category'},'rotated':true},'onrendered':function(ev,ui){$(".widget-grid").masonry({'itemSelector':'.widget'})}});
c3.generate({'bindto':'#517df254__ableworkforce_xepan_base_view_chart_chart','data':{'columns':[['present',11.111111111111]],'type':'gauge'},'color':{'pattern':['#FF0000','#F97600','#F6C600','#60B044'],'threshold':{'values':[30,60,90,100]}},'onrendered':function(ev,ui){$(".widget-grid").masonry({'itemSelector':'.widget'})}});
And last graph is not drawn. showing
SyntaxError (DOM Exception 12): The string did not match the expected pattern.
However, I can run ANY two and it works fine. that means all code is perfect but once second one is drawn ( no matter in which order). Third one doesn't draws.
Is it any known bug, or any workaround known.
Using v0.4.11 of c3 from c3js.org
Here is my jsfiddle
https://jsfiddle.net/2yy2mjaf/1/
Thank you.
IDs cannot start with a number, which is the case of your third ID.
The simple solution is just adding a letter to it:
'bindto':'#a517df254_ //just put an "a" before the number here
Here is your fiddle: https://jsfiddle.net/7dkLdg32/
I have a library of flags online that I use in a spreadsheet. The current function looks like this:
=image("http://www.website.com/images/Flags/us.png", 3)
I would like to apply a rule or a function to an entire column so that I just need to write us and it automatically adds this before:
=image("http://www.website.com/images/Flags/
and this after:
.png", 3)
Is this even possible?
Certainly. If you put the two 'standard components' into say B1 and C1 as shown below then:
=B$1&A3&C$1
should serve to concatenate the three elements to suit provided the us is in A3. The formula can be copied down to wrap the standard components around other values in ColumnA, if required:
I have a SSRS report which is the snapshot or another report. It runs every day # 6 am. I want to add a header at the top of the report(snapshot), which indicates when the snapshot was taken so that the user knows when the snapshot was taken.
Does anyone know how can i do that?
if I truly understand your question :
you can add date or time of report processing by adding a textbox on header and write this expression as its value :
=TimeOfDay()
or
=Now()
Ususally you would use Globals!ExecutionTime to display this, but from my research, headers and footers are calculated when the report is rendered. A work around for this is to place the textbox (make it hidden) with Globals!ExecutionTime in it on the report body and then place another textbox in the header or footer which references that textbox like this: ReportItems!ReportBodyTextBoxName.Value.
Answer found on the following site:
http://www.manning-sandbox.com/message.jspa?messageID=52186
The best way for me was to add an extra column to my dataset. e.g.:
SELECT COL1
,COL2
,...
,COLn
,SYSDATE AS EXEC_DAT
FROM ...
You can then use First(Fields!EXEC_DAT.Value, "DATASET_NAME") if the expression is in the header.
PS: SYSDATE works for Oracle, you'll have to determine the correct function for your RDBMS