I am new to mySQL and got the exercise to implement a function which merges columns from one table and outputs it as a string, separated by CR (a CR after each record, i.e. separate the records by “\n”).
I have tried it already, but there appears an error which say: "SELECT MergeTablesAndOutputString(1) LIMIT 0, 1000.
What do I have to do differently that it works?
DELIMITER //
CREATE FUNCTION MergeTablesAndOutputString
(owner_id int)
RETURNS varchar(50)
DETERMINISTIC
BEGIN
DECLARE bname varchar(30);
DECLARE apno int(30);
DECLARE gno int(30);
set bname = Building.buildingName;
set apno = Building.apartmentno;
set gno = Building.garageno;
RETURN CONCAT(bname, '\n' + apno, ' \n', gno);
END//
DELIMITER ;
Related
Ok, I have this function:
CREATE FUNCTION ReaderSearcher(id INT) RETURNS varchar(100) NOT DETERMINISTIC
BEGIN
DECLARE resultList varchar(100);
IF id > 0 THEN
SET result = 'The search was a success! Readers:';
ELSE
SET result = 'The parameter has to be bigger than "0"!';
END IF;
RETURN result;
END $$
and this procedure:
CREATE PROCEDURE searcher(id INT)
BEGIN
SELECT ReaderSearcher(id) AS RESULT, readers.firstname AS NAME
FROM readers WHERE READER_ID = id;
END $$
and I want my results to be:
1) one column which is not null and contains at least the message 'The parameter has to be bigger than "0"!'
2) two columns, first has the message about the result and the second that has name of the reader or some kind of placeholder.
So far it works if the parameter is bigger than 0 but anything lower gives me nothing, just columns' labels. How can I make it work? I tried some stuff like COALESCE and CONCAT with ISNULL but it stays the same.
edit: I'm using MySQL and MySQL Workbench.
I actually got the answer:
CREATE FUNCTION ReaderSearcher(id INT) RETURNS varchar(100) NOT DETERMINISTIC
BEGIN
DECLARE result varchar(100);
IF id > 0 THEN
SELECT readers.FIRSTNAME INTO result from readers WHERE READER_ID = id;
ELSE
SET result = 'The parameter has to be bigger than "0"!';
END IF;
RETURN result;
END $$
That gives me precisely what I wanted.
I need to convert a function from PostgreSQL toMySql. I need to remove the special characters from a string uri.
CREATE OR REPLACE FUNCTION name2uri(text)
RETURNS text
IMMUTABLE
STRICT
LANGUAGE SQL
AS $$
SELECT REPLACE(TRIM(regexp_replace(translate(
LOWER($1),
'áàâãäåāăąèééêëēĕėęěìíîïìĩīĭḩóôõöōŏőùúûüũūŭůäàáâãåæçćĉčöòóôõøüùúûßéèêëýñîìíïş',
'aaaaaaaaaeeeeeeeeeeiiiiiiiihooooooouuuuuuuuaaaaaaeccccoooooouuuuseeeeyniiiis'
), '[^a-z0-9\-]+', ' ', 'g')),' ', '-');
$$;
how do I do that? Tks.
Solution
DROP FUNCTION IF EXISTS translate;
DELIMITER //
CREATE FUNCTION translate(subject varchar(255), what varchar(255), replace_to varchar(255))
RETURNS varchar(255)
DETERMINISTIC
begin
declare c int unsigned default 0;
declare result varchar(255);
set result = subject;
while c <= length(subject) do
set result = replace(result, mid(what, c, 1), mid(replace_to, c, 1) );
set c=c+1;
end while;
return result;
end
and
DROP FUNCTION IF EXISTS name2uri;
DELIMITER //
CREATE FUNCTION name2uri(i text)
RETURNS longtext
DETERMINISTIC
BEGIN
declare result longtext;
set result = REPLACE(TRIM(regexp_replace(translate(
LOWER(i),
'áàâãäåāăąèééêëēĕėęěìíîïìĩīĭḩóôõöōŏőùúûüũūŭůäàáâãåæçćĉčöòóôõøüùúûßéèêëýñîìíïş',
'aaaaaaaaaeeeeeeeeeeiiiiiiiihooooooouuuuuuuuaaaaaaeccccoooooouuuuseeeeyniiiis'
), '[^a-z0-9-]+', ' ',1,0,'c')),' ', '-');
return result;
end
select name2uri(' fáBIO rodrígues') with space before or after the string comes out ok! --> fabio-rodrigues
select name2uri('fáBIO rodrígues') without space before or after the string quits not ok! --> fabio-rodr-gues (the char i is replace by -)
Why did not correctly replace the í character with i?
I'm trying to figure out how to create a single MySQL query that will allow me to display only the next 10 characters following the string "filter" in the Message field. The string "filter" appears at various positions in each record, so I can't use a position filter.
I've been trying to use something like like what I have below, however I've been unable to get the correct query.
SELECT RIGHT(Message,LOCATE('filter',Message) - 10) FROM table
The Message field records within the table looks like:
QgySSW8fwD25iQ.filter0019p3las1-31205-59C3D
6t2fJw.filter0010p3las1-9745-59
filter0025p3las1-13130-59C3D317
And I'm looking for them to look like this after the query:
0019p3las1
0010p3las1
0025p3las1
Any help is greatly appreciated.
Use a combination of LOCATE() within SUBSTRING(). See this SQL Fiddle
CREATE TABLE Table1
(`message` varchar(200))
;
INSERT INTO Table1
(`message`)
VALUES
('QgySSW8fwD25iQ.filter0019p3las1-31205-59C3D'),
('6t2fJw.filter0010p3las1-9745-59'),
('filter0025p3las1-13130-59C3D317')
;
Query 1:
select
SUBSTRING(message,LOCATE('filter',Message)+6,10)
from table1
Note that the +6 is to offset for the length of "filter" because LOCATE finds the position of the "f" and you then need to add 6 for the other characters "ilter". Once that number is determined then just get the next 10 characters.
Results:
| SUBSTRING(message,LOCATE('filter',Message)+6,10) |
|--------------------------------------------------|
| 0019p3las1 |
| 0010p3las1 |
| 0025p3las1 |
See SQLFiddle.
Result table structure
Create table resulttbl (
id int(6) primary key auto_increment ,
resultFIlter varchar(1000)
);
Function to split string
CREATE FUNCTION strSplit(x VARCHAR(65000), delim VARCHAR(12), pos INTEGER)
RETURNS VARCHAR(65000)
BEGIN
DECLARE output VARCHAR(65000);
SET output = REPLACE(SUBSTRING(SUBSTRING_INDEX(x, delim, pos)
, LENGTH(SUBSTRING_INDEX(x, delim, pos - 1)) + 1)
, delim
, '');
IF output = '' THEN SET output = null; END IF;
RETURN output;
END;
Stored procedure to split and insert into result table
CREATE PROCEDURE FilterTable()
BEGIN
DECLARE i INTEGER;
DECLARE endpos INTEGER;
DECLARE fullstr VARCHAR(1000);
DECLARE result VARCHAR(1000);
SET fullstr = 'QgySSW8fwD25iQ.filter0019p3las1-31205-59C3D 6t2fJw.filter0010p3las1-9745-59 filter0025p3las1-13130-59C3D317';
SET i = 2;
SET endpos=LENGTH(fullstr) - LENGTH(REPLACE(fullstr, 'filter', '')) ;
delete from resulttbl;
REPEAT
SET result=strSplit(fullstr, 'filter', i);
IF result IS NOT NULL THEN
SET result=LEFT(result,10);
INSERT INTO resulttbl (resultFIlter) values(result);
END IF;
SET i = i + 1;
UNTIL i >= endpos
END REPEAT;
END ;
Call the procedure using the statement CALL FilterTable().
Now the result of your procedure is available on the table resulttbl.
You can get the values from that table using select statement as SELECT * from resulttbl.
Result
id resultFIlter
1 0019p3las1
2 0010p3las1
3 0025p3las1
DELIMITER //
CREATE OR REPLACE PROCEDURE GET_USER_PNTS(USER_ID INT , PNTS INT, QNT INT)
BEGIN
DECLARE x INT DEFAULT 1;
DECLARE TEMP_GIFT_ID INT;
UPDATE USR_PNT_SUMM SET USD_PNTS = USD_PNTS + PNTS WHERE USER_ID = 1;
COMMIT;
END //
DELIMITER ;
The above stored procedure updates two rows - one for user_id = 1 and the other one for userid 0. I dont understand why!
This is how I call the stored procedure -
CALL GET_USER_PNTS(1, 1, 1)
Please let me know why the user_id 0 is also getting updated.
P.S
1. I am using MariaDB.
2. UserID 0 is what I had manually added in the table. In pratice there won't be any 0 user_id. But even then, the row should not have been updated.
Please rename your parameters:
CREATE OR REPLACE PROCEDURE GET_USER_PNTS(L_USER_ID INT , L_PNTS INT, L_QNT INT)
BEGIN
DECLARE x INT DEFAULT 1;
DECLARE TEMP_GIFT_ID INT;
UPDATE USR_PNT_SUMM SET USD_PNTS = USD_PNTS + L_PNTS WHERE USER_ID = L_USER_ID;
COMMIT;
END //
Probably USER_ID = USER_ID is treated as true.
I have developed a function for split string in tsql but mysql don't have some built in functions. I needed to function in MYSQL as i am new in mysql. Function should accept 2 parameters
1. String to be split
2. separator (',' or whatever)
Kindly reply me.
i had found solution on the internet you can into that.
DELIMITER //
DROP FUNCTION IF EXISTS `splitAndTranslate` //
CREATE FUNCTION splitAndTranslate(str TEXT, delim VARCHAR(124))
RETURNS TEXT
DETERMINISTIC
BEGIN
DECLARE i INT DEFAULT 0; -- total number of delimiters
DECLARE ctr INT DEFAULT 0; -- counter for the loop
DECLARE str_len INT; -- string length,self explanatory
DECLARE out_str text DEFAULT ''; -- return string holder
DECLARE temp_str text DEFAULT ''; -- temporary string holder
DECLARE temp_val VARCHAR(255) DEFAULT ''; -- temporary string holder for query
-- get length
SET str_len=LENGTH(str);
SET i = (LENGTH(str)-LENGTH(REPLACE(str, delim, '')))/LENGTH(delim) + 1;
-- get total number delimeters and add 1
-- add 1 since total separated values are 1 more than the number of delimiters
-- start of while loop
WHILE(ctr<i) DO
-- add 1 to the counter, which will also be used to get the value of the string
SET ctr=ctr+1;
-- get value separated by delimiter using ctr as the index
SET temp_str = REPLACE(SUBSTRING(SUBSTRING_INDEX(str, delim, ctr), LENGTH(SUBSTRING_INDEX(str, delim,ctr - 1)) + 1), delim, '');
-- query real value and insert into temporary value holder, temp_str contains the exploded ID
SELECT <real_value_column> INTO temp_val FROM <my_table> WHERE <table_id>=temp_str;
-- concat real value into output string separated by delimiter
SET out_str=CONCAT(out_str, temp_val, ',');
END WHILE;
-- end of while loop
-- trim delimiter from end of string
SET out_str=TRIM(TRAILING delim FROM out_str);
RETURN(out_str); -- return
END//
reference http://www.slickdev.com/2008/09/15/mysql-query-real-values-from-delimiter-separated-string-ids/
In mysql they they dont support some functionality like sqlserver. so spliting will be difficult in mysql
SELECT e.`studentId`, SPLIT(",", c.`courseNames`)[e.`courseId`]
FROM ..
SELECT TRIM(SUBSTRING_INDEX(yourcolumn,',',1)), TRIM(SUBSTRING_INDEX(yourcolumn,',',-1)) FROM yourtable
CREATE FUNCTION [dbo].[SplitString]
(
#RowData nvarchar(2000),
#SplitOn nvarchar(5)
)
RETURNS #RtnValue table
(
--Id int identity(1,1),
Data nvarchar(100)
)
AS
BEGIN
Declare #Cnt int
Set #Cnt = 1
While (Charindex(#SplitOn,#RowData)>0)
Begin
Insert Into #RtnValue (data)
Select
Data = ltrim(rtrim(Substring(#RowData,1,Charindex(#SplitOn,#RowData)-1)))
Set #RowData = Substring(#RowData,Charindex(#SplitOn,#RowData)+1,len(#RowData))
Set #Cnt = #Cnt + 1
End
Insert Into #RtnValue (data)
Select Data = ltrim(rtrim(#RowData))
Return
END