I just installed the Clion on Linux and now face some problems. If I create a new project in Clion, I can choose a c/c++ configuration from some given options like in the linked photo.
finding configuration
So the work of configuration will be done. I can run or debug my program without problems.
However, if I open an existing file using Clion, I need to add configuration but no finding any given options. I tried to "edit configuration" but can't find any configuration like those in the linked pickture above.
Just like this below:
no finding configuration
My question is: how could I add configuration for a existing project in Clion like for a new project? Or how could I find thoes configuration in the first linked picture?
Thanks for help.
Related
I am trying to configure wso2 by modifing its configuration file named "carbon.xml", but no matter what change I do to "carbon.xml", even adding a single "white space" or modifying a comment it's enough for the wso2 server to reset carbon.xml file to it´s original "out of the box" state.
I tryied to protect the file carbon.xml by dropping write permissions, but in this case wso2 server refuses to start, it aborts execution and displays an error complaining that it was not able to "write new configuration" !!!
Does any one know how to solve this?
I found the answer, In wso2 version 5.9 there is a new centralized configuration file, named "deployment.toml". Configurations must be done in this file and then wso2 propagates changes to the respective configurations files, like carbon.xml or catalina-server.xml, for example.
If you delete "deployment.toml" wso2 will fallback to previos behavior.
With the new 4.5.0 carbon-kernel release, all WSO2 products such as APIM 3.0.0, IS 5.9.0 introduced a new config model. According to the new config model, there is a centralized configuration file (deployment.toml) where users add the configurations, then those configurations will be added to the respective .xml files.
This new config model was introduced in order to simplify the configuration (previously there were a lot of configuration files) and to increase the user experience. Please follow this documentation to refer further information on this new config model
Related documents:
https://wso2.com/blogs/thesource/2019/10/simplifying-configuration-with-WSO2-identity-server
https://is.docs.wso2.com/en/next/references/new-configuration-model/
If you have a deployment.toml file, the changes directly made into the xml files will be overiden during the server startup. Deleting the deployment.toml file will use the old config model. But it is not a recommended approach.
I've been trying to follow the
Setting Up Stackdriver Debugger for Java applications on Google Compute Engine, but am running into issues with Stackdriver Debug.
I'm building my .war file from a separate build server, then deploying it to my GCE server. I added the agent to the start command via /etc/defaults, and my app appears in the https://console.cloud.google.com/debug control panel. The version I set in the run command matches the revision that shows up in the source-context(s).json files.
However when I click open the app, I see the message that
No source version information was provided by the deployed application
I connected the app's git repo as a mirrored cloud repository, and can browse the source files in the sidebar of the Stackdriver Debug page. But, If I browse to a file and add a breakpoint I get an error that the error "File was not found in the executable."
I have ran the gcloud preview app gen-repo-info-file command, which created two basic json files storing my git repo and revision. Is it supposed to do anything else?
I have tried running jetty using both normal and extracted modes. If I have jetty first extract the war file, I can see the source-context.json filesin the WEB-INF/classes directory.
What am I missing?
https://github.com/GoogleCloudPlatform/cloud-debug-java#extra-classpath mentions
you can update the agentPath showing your WEB-INF/class directory.
-agentpath:/opt/cdbg/cdbg_java_agent.so=--cdbg_extra_class_path=/opt/tomcat/webapps/myapp/WEB-INF/classes
For multiple class paths:
-agentpath:/opt/cdbg/cdbg_java_agent.so=--cdbg_extra_class_path=/opt/tomcat/webapps/myapp/WEB-INF/classes:/another/path/with/classes
There are a couple of things going on here.
First, it sounds like you are doing the correct thing with gen-repo-info-file. The debugger agent should pick up the json files from the WEB-INF/classes directory.
The debugger uses fuzzy matching to find source files, so as long as the name of the .java file matches a file in your executable, you should not get that error.
The most likely scenario given the information in your question is that you are attaching the debugger to a launcher process, rather than your actual application. Without further details, I can't absolutely confirm that, though.
If you send us more details at cdbg-feedback#google.com, we can look more closely at your case to see if we can understand exactly what's happening, and potentially improve our documentation, since it sounds like you followed the docs pretty closely.
I am getting when trying to access a MySql database :
[FireDac][Phys][MySQL]-314. Cannot load vendor library [libmysql.dll
or libmysqlld.dll]
This did not previously happen with this (unchanged) code, however, I have upgraded to Windows 10 and had to reinstall Delphi XE8, so it is obviously a system configuration matter.
In order to try to solve the problem, I copied both of those files into c:\windows\sysytem32.
When that did not seem to work, I copied them into \win32\debug, which is where the generated .EXE resides.
I imagine that I am doing something rather stupid, but can't see what.
The proper solution is to place the driver file (eg., libmysql.dll) in your application's folder, or to place the installation location in your FDDrivers.ini file:
[MySQL]
Vendor=<folder>\libmysql.dll
(Recent versions of the documentation seem to use VendorLib instead of Vendor in the INI file.)
See the RAD Studio documentation topics Configuring Drivers (FireDAC) and Connect to MySQL Server (FireDAC) for more information.
Let me to answer in two point.
Developing, live database connection!
Hope you have on your data module an "TFDPhysMySQLDriverLink" component.
Click this component and browse your LibMySQL.DLL into VendorLib. Should be work. But only in design time.
Runtime. Hopefully your DM created firstly in your project.
In the DM's OnCreate event, you have to disconnect your library (I always ran my project with no database connection) and replace your "TFDPhysMySQLDriverLink"'s Vendorlib to LibMySQL.DLL (which is copied your which is copied where the generated .EXE resided)
Have a nice day!
I would like to setup PhpUnit in PhpStorm. I press 1. Edit Configurations... and would like to enter this parameter in field 2.
I am using phpunit.xml as configuration file and all want to use a relative path like:
phpunit.xml
or use project root variable like
$PROJECT_ROOT/phpunit.xml
But both options are not working for me.
Based on your screenshot (the place where you want to use it): use full path -- in project settings such path is stored relative to the project root anyway (unless you specify some file which is outside of the project, of course) and the full path then reconstructed when needed (e.g. when shown to you or when used as a parameter during tests execution).
I don't think you'll be able to achieve what you want via the project's Run/Debug configurations. What might help you is the Default configuration file setting in your default project settings, which can be used to define the PHPUnit configuration file to use by default, so you don't need to specify it via the Use alternative configuration file option in your Run/Debug configuration.
To set this, open your Default Settings window, then navigate to Languages & Frameworks -> PHP -> PHPUnit. In the Test Runner section tick the Default configuration file checkbox and specify the location where you keep your configuration file. If this file will always be in the same path relative to your project root, you can use the $PROJECT_DIR$ variable to define the project root. So if your PHPUnit configuration file is always in the root of your project, you might set this to something like $PROJECT_DIR$/phpunit.xml. When you create a new project, its Default configuration file variable will be set to the file offset from your project root, and you won't need to use the Use alternative configuration file option in your Run/Debug configuration.
If you're opening the same project in different locations on the same machine this should work for new projects without any problem, if you want to share this configuration across machines, you might need to try PHPStorm's Exporting and Importing Settings functionality.
I'm not sure if this directly solves your problem, and it's a few months late anyway, but maybe this will be useful for someone else who stumbles across this question... The above instructions were correct for my 8.0.3 installation on Linux.
I am try to keep separate workspace directory and code directories in my php project and sweating to understand/find how this could be achieved. A couple of revisions back I tried phpStorm and found that it does not provide such feature.
I just want to know if phpstorm 6.0 has this feature or still lacking it ? If possible please help me out.
Work Around
File > Settings >[Directories]
+[Add Content Root] to add external directory
Assuming that you have created project separate from code.Some of the tool might not work
as expected
This works for linux using sshfs, sorry for windows users.
I've created this folder structure in my pc
/mnt/remote_code/code/
And i have to mount code from server like this
sshfs user#server:/var/www/server_code/ /mnt/remote_code/code/
Code from server will be mounted in code folder
In PS I open this directory: /mnt/remote_code/
So, that means PS will create this folder /mnt/remote_code/.idea (indexing and saving all project and ide settings), and keeps the code folder (with remote code inside) without changes.
Hope it help you.
Greetings.