Related
I often have a lot of tabs open in Chrome browser(s) when developing. I always use the Chrome DevTools un-docked, in a separate window.
Lets say I have opened DevTools for a given tab, then did some search on SO in another tab...
Then if I focus the Chrome DevTools window again, how can I easily find the corresponding browser tab that belongs to this debug window?
I do have a solution, but it is not that straight forward:
in DevTools, go to tab 'Elements'
right-click any element inside the tag
select 'focus' (at the bottom of the list)
This will bring the corresponding browser to the front and will focus the corresponding tab and will focus the selected element.
This is OK but too many steps and forces to leave the current panel in DevTools (need to go to the Elements tab)
I would like a simple shortcut that just focuses the corresponding tab in the browser.
I'm on Chrome Version 41.0.2272.101 m (newest), and this update is messed up. They put it, when you have inspector open, that any DOM change will flash with purple on the changed element (like in Firefox), but now I cannot inspect any hovered object (also like in FF, which is why I don't like to use it when doing front end developing).
I'm talking about js triggered events, like superfish for instance. Before, I could hover the menu, and cover the menu with the inspector, and the menu would stay opened, and I could go in the inspector see what pseudoelements are created, change the paddings and such directly, and see the change. Now, when I hover the menu, and right click to inspect it, the menu closes, and I cannot inspect it!
I tried dragging the inspector over, but nothing helped. This new 'feature' is annoying as hell. Is there a way to inspect js triggered events, without putting break points on elements (which works, but is kinda pain in the ass)?
Hover over the element with your mouse and press F8 (this will only work in Chrome) to pause the script execution. The hover state will remain in visible to you. If you're on a Mac, you may have to open system preferences and check off "Use all F1,F2,etc" check box (Or simply use fn + F8).
Sometimes it only works if you are in the Sources tab of the inspector.
*Yes, you should be in the source tab and MOST IMPORTANT is you should close all the opened tabs in the Sources tab before you press F8(win) or Fn+F8(mac). *
Depending on the menu element type, I ran into this issue with drop-down input menus. The reason it's disappearing when I inspect it, is because a blur or focusout event is always triggered on the element when I click anywhere outside the element.
One way I was able to inspect the element is to prevent these events from being triggered is by removing their event listeners:
Inspect the input element on Chrome
Go to the Event Listeners tab and remove the blur or focusout event
Once the event listeners are removed, you can open the menu and inspect it without disappearing
In Chrome, press F12 to open the developer console, then click on Settings (cogwheel icon) or press F1:
then find & check the "Emulate a focused page" option.
Update: as noted in comments, this option is now in another place. See this answer.
On Mac, you can press cmd+\ to pause the script after having opened the dropdown. You can then use shift+cmd+c to inspect elements.
Adding to "In Chrome, press F12 to open the developer console, then click on Settings (cogwheel icon) or press F1:" above;
In Chrome 86 and above you can find "Emulate a focused page" option here:
DevTools >> Elements >> "Kebab" menu (3 vertical dots by the settings cog) >> More tools >> Rendering.
Alternately: With Devtools open: Hit CTRL/CMD+SHIFT+P to open the command menu HUD, enter "emulate a fo" to narrow the search results and enter (or click) to toggle the setting.
Now, when I hover the menu, and right click to inspect it, the menu
closes, and I cannot inspect it!
I faced the same issue and what I used was Expand recursively option on chrome dev tools:
The steps are:
Inspect the dropdown field
Find the dynamic DOM (the purple highlight)
Right-mouse click on that dynamic DOM
Choose Expand recursively:
We can see all elements are there
Here is a demo:
In Firefox
In Inspector, right click on a node that contains the dropdown, select:
Break on... > Subtree modification
This will pause execution the moment dropdown is... well... dropped down.
Only way that would work for me was doing setTimeout(() => { debugger }, 3000) in the console and opening the dropdown while timeout was running.
Pressing pause button in dev tools UI or F8 key to pause script execution would both close the menu.
I just used emulate a focused page and it worked like a charm
go to settings
go to more tools
find Rendering
find "emulate a focused page" and click the radio button
voala now you can inspect your select element
You can set an interval that writes out the content of a given element in the JS console every second. Drop this in the console and open the dropdown.
setInterval(() =>
console.log(document.querySelector('.Select-menu-outer').outerHTML),
1000)
None of the above referred remedies worked for me.
As our drop down (React based) will close on any single click (right or left)
So we found out the below workaround:
In Chrome Open developer tools
first click on the drop-down in collapsed state & let it expand with options
then under the element section, right-click on the div node (make sure not to left click before right clicking), which contains details of the drop-down items
Then select option 'Expand Recursively'
Then required details were shown
I think you can use the CSS Editor in Chrome to apply a state, for instance, the state of 'hover'.
In the Developer Tools, you select an element. On the right hand you have a square with an arrow over it. Click that and you can choose a state. For instance, pick hovered and you'll see both your window and your CSS update as if the element is being hovered right now.
On Windows, press F12 first, at the page with the menu, then point your mouse to the element menu (the menu will drop down), then press CTRL + Shift + C. Now you can inspect all the elements.
in my case i do following steps
Open developer tool or inspect page
click three dot button at top right
click on More tools -> Rendering
then check on Emulate a focused page option.
I'm trying to inspect CSS properties from an input into a table cell. The input appears on click and disappears on lost focus, as when I try to inspect it.
How can I do it to don't lost focus while I move to another window (the inspector)?
In Chrome browser, open Developer Tools and select Elements tab, then
open the contextual menu of the parent node of the element you want to inspect, in the contextual menu click on Break on > Subtree modifications.
Afterwards you just need to click on the page and you'll get on the inspector without losing focus or losing the element you want to inspect.
In chrome devtools settings, there is an option named Emulate a focused page which is disabled by default. After enabling this option, if you click anywhere on the devtool window, it wouldn't cause loss of focus on any element in the DOM.
For Chrome version >= 86:
Open devtools and then press Command+Shift+P (Mac) or Control+Shift+P (Windows, Linux) to open the Command Menu. Start typing Rendering in the Command Menu and select Show Rendering. There you can enable Emulate a focused page.
After that, just click on any element to focus, and then click anywhere on the devtool window. You would see that element doesn't lose the focus. So now you can easily inspect or debug.
For Chrome version < 86
Go to devtool settings -> preferences and under Global option, enable Emulate a focused page.
You can capture the disappearing element if you pause JavaScript execution without moving the mouse. You can do so with a keyboard shortcut or by triggering a debugger statement. This works for elements whose appearance is controlled by JavaScript, rather than CSS :hover (if CSS, see Dumba F.'s answer).
Keyboard shortcut
This approach works for pages which don't use JS to trigger special behavior on keypresses. These instructions are for Google Chrome, but can be adapted to other modern browsers:
Open up Developer Tools and go to Sources.
Note the shortcut to pause script execution—F8 (there may also be another shortcut depending on your OS).
Interact with the UI to get the element to appear.
Hit F8.
Now you can move your mouse around, inspect the DOM, whatever. The element will stay there.
debugger statement
To trigger a debugger statement which executes while the hovered element is visible, use setTimeout:
Open the JS console, and enter:
// Pause script execution in 5 seconds
setTimeout(() => { debugger; }, 5000)
Cause the hover to open and wait for the script execution to be paused.
(Same as Nick Farina's answer)
If all else fails, type this in the Console:
setTimeout(() => { debugger; }, 5000)
Then you've got 5 seconds (or change the value to anything else) to make whatever you want to debug appear.
None of the other answers worked for me - the DOM tree kept getting modified (i.e. stuff I care about disappeared) right before the script paused.
Not sure if this works in your situation but normally (and in every case worth to mention in this regard as it is a great tool) in Chrome Developer Tools you can simulate element states and one is also :focus.
To do so go to the Elements tab in the Developer Tools and make sure you are in the Styles section on the right (this should be the default location when you start the Developer Tools). Now just beneth the Styles in the top right corner you have an icon Toggle Element State. When you click it you can simulate :active, :hover, :focus and :visited for the element you selected on the left in your code view.
In Chrome on the developer tools page for the page under test... click the options menu and open settings for preferences... under DevTools enable 'Emulate a focused page'
Then in the test page cause the elements to appear. This worked to keep my popup search results is focused to stay on the screen so I could work with it.
Not a real solution, but it usually works (:
Focus the element
Right click for context menu
Move down to developer tools
I had a very difficult situation and no answer was working from here (I didn't verify the answers changing the container, which is the body for me, or the original event, because I don't know that). I finally found a workaround by breaking via the Control Event Listener Breakpoints in Chrome Inspector. Maybe that is also a cross browser way of breaking for complicated situations where even F8 or right clicking mouse hide the popup again:
Click right of element in chrome devtools ;-)
Paste the following Javascript in the browser developer console:
// Delayed console log of parent element with disappearing child element(s)
// Once code is trigger, you have 3 seconds to trigger the hidden element before it snapshots.
// The hidden elements should appear in the console ready to inspect.
var timer = 3000; //time before snapshot
var parent_of_element_to_inspect = 'div.elementcontainer'; //container of element to snapshot
setTimeout(function(){
console.log(document.querySelector(parent_of_element_to_inspect).cloneNode(true));
},timer);
I have a quicker fix since I'm not very good with using tools, here's what i do.
event.originalEvent.preventDefault();
event.originalEvent.stopImmediatePropagation();
event.originalEvent.stopPropagation();
If you open Chrome DevTools and then trigger the element inspector using keyboard shortcuts, it should solve the problem.
Mac: Cmd+Opt+J and then Cmd+Opt+C
Windows: Ctrl+Shift+J and then Ctrl+Shift+C
[
I am trying to view, through Chrome's developer tools, how tooltips are structured on a site. However, even when I am hovered over the item, when I "inspect element", nothing shows for the tooltip in the html. I know I can set the Style to :hover, but I still can't see the html or css of the tooltip.
Any ideas?
F8 will pause debugging.
On Mac, you may need to have the 'Sources' tab of the developer tools open.
Mouse over the tooltip, and press F8 while it is displayed.
You can now use the inspector to look at the CSS.
I actually found a trick to do that with the Twitter Bootstrap tooltips. If you open the dev tools (F12) on another monitor, then hover over the element to bring up the tooltip, right click as if you were to select 'Inspect Element'. Leaving that context menu open, move the focus over to the dev tools. The html for the tooltip should show up next to the element its a tooltip for in the HTML. Then you can look at it as if it were another element. If you go back to Chrome the HTML disappears so just something to be aware of.
Kind of a weird way but it worked for me so I figured I would share it.
This solution works without any extra code.
Hit command-option-j to open the console. Click the window-looking button on the top right corner of the console to open the console in a different window.
Then, in the Chrome window, hover over the element that triggers the popover, hit command-` however many times you need to focus on the console, then type debugger. That'll freeze the page, then you can inspect the element in the Elements tab.
Click f12 go to the console tab and add the following:
setTimeout(()=> {debugger},5000)
This will give you 5 seconds to do whatever you want and it will break at 5 seconds. Then you can inspect the target element
(ex. hover the element and wait 5 seconds then inspect..)
You would just need to force the tooltip to show as such
$('.myelement').tooltip('open');
Now the tooltip will show regardless of hovering state.
Scroll down near the bottom of the DOM where you should see the markup.
Update see cneuro's comment for Bootstrap 3.
$('.myelement').tooltip('show');
Update see Marko Grešak's answer for Chrome and apparently Safari as well, $0 can be used as a shortcut for the currently selected element. This appears to work in Safari as well.
$($0).tooltip('show')
Single window answer, with no coding
None of the other answers are quite right, or have enough detail, so here's my attempt.
Open Chrome's DevTools using F12/Ctrl+Shift+I (Windows/Linux) or Command+Option+I (Mac).
Select the Sources tab in the DevTools window.
Using the mouse, hover over the element you want to inspect, to make the tooltip visible.
Press F8 (Windows/Linux/Mac) to pause script execution. The main window will grey out, and a "Paused in debugger" popup will appear.
In the DevTools window, select the Elements tab
For Bootstrap tooltips, the tooltip will appear as the last <div> in the <body>
For me, the accepted answer didn't work: clicking in DevTools immediately closed the ToolTip.
However, I found https://superuser.com/questions/249050/chrome-keyboard-shortcut-to-pause-script-execution which helped me:
In the console:, Run:
const F12 = 123
window.addEventListener('keydown', function(event) {
if (event.keyCode === F12 ) {
debugger;
}
});
Highlight element with inspector
Hit F12
You can now inspect the element, with JavaScript paused so the DOM won't change.
it is so simple to edit these tooltips.
Step 1: Inspect the element that has the tooltip. Make sure it is highlighted with blue in devtools.
Step 2: right-click on the element (in devtools part) and select: attribute modifications, under Break on
Step 3: Hover over the inspected element and a gray overlay will appear over the site with a small text: Paused in debugger
at the top of your screen
Step 4: Click on the blue arrow until the hover state is selected.
Step 5: Inspect and edit the tooltip
No code solution for JS activated tooltips:
With Chrome's devtools inspect the containing / parent element of the tooltip. In the "elements" tab, right click on that container DOM element then choose "break on" > "subtree modifications". The next time you hover over the part of the DOM the tooltip is housed in, the JS code will be paused allowing you to inspect the contents of the tooltip.
Follow these steps
Open Inspect window in chrome.
Place the mouse over the tooltip.
Press F8
JS execution will be paused and then you can inspect the tooltip.
Press F8 again to start execution and F10 to debug.
Here is how I did it on Mac:
Hover over the element that has a tooltip with chrome devtools opened.
Wait for the tooltip to appear.
Open devtools command palette with a keyboard shortcut. Cmd+Shift+P worked for me.
Type in Disable JavaScript and press Enter
This will prevent from fading all the tooltips that utilize JavaScript.
Hover over the element, press F8 for little longer, it will pause script execution.
Here’s a simple solution: If you have dynamic tooltips, you can make them “persistent” by (temporarily) changing the trigger event to click. This will have the effect that the tooltip only disappears on a click-out:
$('body').tooltip({
selector: "[data-toggle='tooltip']",
trigger: "click"
});
This way, it can be easily inspected with FF’s or Chrome’s debugging tools.
1)Open the Inspect window by clicking F12
2)Go to source tab(next to console)
3)Now hover on element to be inspected and keep your mouse over there.
4)Using keyboard(Tab or shift+tab) to move the control to pause button or F8Refer the image
5)When keyboard focus is on Play button. Hit enter. Your hover element will be freezed you can do anything now
just hit one line script in console and press any key to enter in debug mode.
window.onkeydown = () => { debugger }
The dev tools provides a way to inspect a hovered element like a tooltip.
1 - Open the dev tools using F12.
2 - Select "Elements" tab.
3 - Select the parent element that contains the tooltip.
4 - Click on "..." (on the line of the parent element) and after select "Break on"/"subtree modifications" (see image below)
5 - Finally go back to application and make the Tooltip shows up. It should block the execution after the Tooltip gets visible
Hope it can be useful for someone!
appear the hovered item by over mouse
windows --> Ctrl + shift + c || Mac --> Command + Option + C
I had problems with this so I went to the documentation and inspected the tooltip that is already rendered on the page. That helped me see the dom structure of the tooltip and edit it accordingly.
In Chome on Linux this can be achieved for JS generated tooltips such as those for references on WikiPedia by doing the following:
As stated above, open the dev tools using F12. Open them in another window.
Highlight the tooltip and click Ctrl-Shift-C (The HTML Inspector). As you move over the tip, the dev window will show the appropriate section.
If you need to keep the tip open when you mouse off it, to be able to inspect it in the other window more thoroughly, then right click on the tooltip and leave the context menu up, and click on the the dev tools window. In this scenario it leaves the tip up in the wikipedia window.
To a degree it also works with bootstrap tips.
For some reason the answers provided here weren't working for me on Windows. I was able to inspect the tooltip by opening the dev tools, then hovering over the element that brings up the tooltip, then right clicking on that element (not the tooltip). Then, move the cursor over into the inspector panel and scroll down to the bottom. The tooltip element should still be there.
Another Solution I found for this problem. Through Mobile or Tablet view in Chrome
press Crt + Shift + M in Chrome Dev tools for Mobile view in Chrome.
Click(Tap) on ToolTip div and you can inspect it with Right Click on tooltip
Hit command-option-j to open the console. Click the window-looking button on the top right corner of the console to open the console in a different window.
Then, in the Chrome window, hover over the element that triggers the popover, hit command- however many times you need to focus on the console, then type debugger. That'll freeze the page; then you can inspect the element in the Elements tab.
I found a good way I was struggling with this :
• Open Elements Tab
• Inspect an element on the page , should be close to the element that you are trying to inspect
• Hover over the tooltip
• While the dev/Elements tab is open Hit Ctrl F to move the focus to Text area in element tab where it Says Find by string , selector , or Xpath
• use the keyboard key to navigate up/down the elements till you will get to the elements that you are looking for , dont touch your mouse
Land in this post for answers and find eventually a way to do it. Inspect the parent element of tooltip and set break on subtree change and hover your mouse on element and click F8 till the tooltip appear. You can have your tooltip and check the styling.
some tooltips disappeared when we open the inspect part on hover mode, sometimes they don't disappear when change responsive tab (active or inactive button).
then you can right click and get inspect from it.so easily.
Worth noting that toggling the :hover state from within the dev tools only has an impact if the hint text is enabled via CSS :hover rules in the first place. The toggle only applies the hover state to the element for rendering purposes, but does not trigger a corresponding JavaScript mouseover event.
Many frameworks such as AngularJS dynamically attach tooltip HTML to the bottom of the document body via JavaScript when a target element is hovered, so any amount of hovering and inspecting the target element won't help.
#joeyyang's answer worked very well for me in this scenario.
One of the easiest ways I found is:
Open Chrome dev tools on the side
Hover over element
Right-click
Click on dev tools
Now you can inspect and change styles
I use web developer tools to inspect html and subsequently see the css that is attached to the html element. This is proving to be a great process for learning from other websites (and the debugging my own)
Is there a way to inspect the javascript as well? So when I select the element, to be able to see the javascript related to the element?
In the element panel you can find all information related to an element including events attached to it.
You can use console in the element panel to inspect an element using dir(elementId)which dumps the object with the given id, as a JavaScript object with its properties.
You can see javascript code that is attached as event to any element on the page. In Developer tools its in the Elements tab and each element has "Event Listeners" - there you see what events and what javascript will be catched and executed.
I had the same problem and have been wandering a bit until I found how to do it on Chrome:
1. Open the Inspector Ctrl + Shift + i
2. Select the element that you would like to inspect
3. Click on the Event Listeners tab
4. Click on the link next to the event listener you would like to check
5. Click on Pretty Print (Symbolized as {} at the bottom of the window)