Dears,
I developed the report with some of the groups and everything working well but when executing it always get empty tablix on the last page like the below image
Empty Tablix
I have tried many solutions but without a real solution yet
The command you mentioned is true just make sure to add the footer in the first and last page from footer properties
Related
I have inherited an SSRS report which had an existing tablix on it - I want to add a further tablix below to display data from another data set as the format is very slightly different - each tablix displays a different kind of sales for a certain customer.
I have added the second tablix and the report seems fine within the report designer renderer, but when I access it via MS Edge directly from the URL the first tablix overlaps the second and obscures it from view.
I have set a page break at the end of the first tablix, and at the start of the second, and again in the designer renderer it works fine and pages, but in MS Edge it overlaps across the page break. In Chrome it renders OK.
The issue I have is I am displaying this SSRS report in a Web Browser Control on an access for an it renders just like it does in MS Edge so it looks screwed up.
It is like the first tablix just runs over into page 2 rather than making the extra content of itself page 2, and the second tablix then on page 3. I don't even really need the pages as ideally it would all be one long report with a vertical scroll, but this overlap issue means I have been trying to force it to split.
Any other way I can stop the first tablix obliterating the second one?
I had a similar problem recently (I found your question while searching for an answer). I didn't want to go to all the trouble of creating a sub report and eventually tracked down the cause of the issue for my case which may be the same as what you were experiencing.
The issue was that my first Tablix was setup with a height of 2.7cm. My second one's top was 2.66781cm. That caused both of them to overlap with each other when the report was rendered. When I changed the top of the second Tablix to 2.7cm the issue was resolved.
While working with Tablix Report I want to visible Group header while scrolling
I tried Fixed Data = True but not working for me. BTW, First header row is working fine by changes of show scroll bar. (FixedData property to True in Advanced Mode) but not the this one row.
Kindly provide me the solution.
In SSRS 2008 R2, I managed a workaround using subreports.
Make a report that shows the data for a single group, based on a parameter.
Put all the headers you want on this report's tablix, and make them fixed with FixedData = True.
Use the parameter to set what will appear in the group-specific header text.
Make a separate report that will get every group.
Create a table grouped by your group, with one cell.
Put a Subreport in the cell, and pass the group to the subreport's parameter.
This worked for me in the Visual Studio preview, and viewing a deployed version on IE and Chrome, and hopefully will work in your environment too.
The catch is you'll see the main report header repeated for each group. However I tried to add this to the main report and it seemed to confuse matters, functioning differently in preview, IE and Chrome.
I have a subreport which is usually bigger than one page. The subreport has a heading which should repeat if the subreport is more than one page.
My solution was creating a Tablix Control and put the heading in the first row. In the details row I put the subreport.
First I tried to check Repeat header rows on each page in the Tablix properties to achieve the repeating header, but with no success.
After some research on the internet I found an approach that was already in discussion on stackoverflow and many other sites.
It's about using the "Advanced Mode" but this approach does not work for me either
Here is the link to the second approach on stackoverflow:
Stackoverflow Solution
Helps very appreciated...
There are two solutions that should work:
The Simplest
Open your subreport and move the header row into a textbox in the header of the subreport
Slightly more Complicated
Enter the Advanced Mode for the tablix containing the header row.
Click on the "(Static)" row that is your header row; it's probably the first/top "(Static)" row.
In the properties panel, you should see the row identified as "Tablix Member". If it says textbox1 or nothing at all then you need to repeat step 2.
Change Keep with Group property to "After".
Make sure Repeat on New Page to "True"
That should do it!
I searched in many articles and found that the problem exists in BIDS 2008. Later Microsoft released a fix regarding this.
But, the report designed earlier won't repeat the header. It needs to be redesigned from the beginning
I've been fighting with SSRS for too long now on what should be a simple matter. I'm hoping someone can help me see a solution.
I have a report which has a number of profiles, and each profile has a large number of data sections. The data sections (various tables and charts) are not related to each other in any way other than that they "key" back to the parent profile id.
The goal (which seems simple) is to have a header on each page with the profile information, and then have the data sections (each formatted completely differently) laid out.
The first problem we encountered was that for some reason SSRS2008 does not allow a tablix cell to contain another tablix with a different dataset (why it can't just require a filter based on the parent grouping is beyond me). The recommended workaround for this shortcoming is to either combine all data into a giant dataset (not possible here, data sections are too numerous and varied) or to embed subreports and pass in the parameters. While option number two increases the "work" needed to print a large number of profiles, we proceeded to implement this and it does work.
The problem comes in on the main tablix (the one containing the subreports) that has a static row header group set with "RepeatOnNewPage = true". This setting allows the header to show on every page as desired... except for subreports the span multiple pages, where the header is incorrectly ommitted.
For some reason, when the subreport spans multiple pages, the header of the parent tablix is not repeated! This is driving me insane as it would seem that a couple bad design decisions in SSRS has put me in a situation where I can't create the report I want... headers works without subreports, but I need subreports in order to "join" the data sections to the profile.
This would seem to be a simple and common requirement... after all, it's a report that is being migrated from a decades old reporting system. I've scoured StackOverflow and Google without success... I've seem a number of questions/answers about page breaks, but nothing that suggests a solution to this problem with subreports.
I'm posting this in case I'm missing something. If anyone has any suggestions at all, it would be much appreciated.
A very clean and simple way to repeat the column header on each page
http://www.a2zmenu.com/Blogs/BI/Tablix-headers-not-repeating-in-SSRS-2008.aspx
We've solved our problem... although not in the most ideal way.
The Page Header (of the "master" report, not the subreports) seems to be the only way to consistently have a header section.
We implemented a solution based in large part on this blog posting:
Maintaining State in Reporting Services 2008
We modified slightly from the blog post, removing "id" from the methods and including a GUID to ensure the report values are not mixed up even if the user runs several copies of the report at the same time. (When using shared variables, remember that they are global to the report running across execution instances and across users on the report server, so a lot of care needs to be taken when they are used!)
In the report body we have a hidden text block that calls:
=Code.SetValue("xxx",Fields!Field1.Value) & Code.SetValue("yyy",Fields!Field2.Value)
and in the report page header we reference these as (for example):
=Code.GetValue("xxx")
This works because the body is calculated before the page header, even for Page 1.
Still, in the end it is a hack for something that should be in Microsoft's product, given that they have poured years of development into this product! Why we cannot have nested tablix's and easier to use headers is beyond me... again this is upgrading a report from a program from the early 90's which did all this without problem. At the very least, give us report variables that can be retrieved and set as the report is processed!
Regardless, things are as they are... we've tested the solution with shared variables and it seems to be working very well. We're going to run stress tests to make sure it's implemented correctly, I'll post something here if we find any further problems.
(And if anyone knows of some other way to get consistent header rows on pages, even when there are detail rows with large heights, please share...)
We have faced exactly the same problem during implementation of customer demands on SSRS Reports,
And did try a lot of things which all of them resulted with failure.
In our case,
Main Report has 4 subreport. Each SubReport should be started in new page. And also when new subreport begins, page header should be changed dynamically based on Subreport in body in current page.
Also one of SubReports which was SubReport3 has another case. Basically Main Report was running based on Dealer level. But Customer wants SubReport3 to run for each SubDealer related with #Dealer parameter. Also Customer wants to see each SubDealer data started in New page inside SubReport3.
As a result, we found different workaround as follows.
We created Page Header to Main Report. (Report Menu -> Add Page Header)(As #codinginthevoid said it is most consistent way)
We putted 4 subreports inside separate tablix. We added new column to each tablix. That column in each tablix visiblity = false, width of that column can be as small as possible, then created placeholder inside of that column, wroted down expression as follows:
If expression is in Tablix1, expression was ="Tablix1", if in Tablix2 then "Tablix2" and etc.
Then started design page header for Tablix1, each report item in pageheader that was putted for Tablix1 has visibility expression as follows:
=ReportItems!Tablix1_HiddenTextbox1.Value IS NOTHING
then applied same thing for Tablix2 and etc.
In the end, there were lots of textbox in PageHeader of report and some of them position was completely same, overlapped, But when reports is being rendered, each of those textboxes is being shown it is related page with related subreport.
I have encountered the same problem as well. What I found was that the way to solve the issue was to de-normalise the data, adding a 'Record Type' field to identify whether the row was a parent or a child.
There were two sub-tables in my tablix, both displaying detail data linked to the outer grouping. If I set the headers of the sub-tables to repeat on every page (using the Advanced arrow > Static Properties > KeepTogether = True, KeepWithGroup = After, RepeatOnNewPage = True) then one of the sub-tables would display correctly, however the parent table's repeating header would just disappear.
To keep a long story short, this was a massively annoying problem to solve. The solution is simple, it worked for me, but may not work for everyone.
Linked below is a SSRS2008 example RDL that connects to localhost and has an example of the problem I had and also the solution I implemented. Please feel free to use it if you find it useful!
(I would've posted it on here but Stack Overflow fails for code blocks it seems)
http://www.sqlservercentral.com/Forums/Topic1111567-1633-1.aspx?Update=1
I have few subreports in a sql main report(.rdl file) using VS/SSRS 2008.
The subreports start approximately on the middle of the page in the main report detail section. I have one group in main report, shows header information and pass one parameter - ReportID to each subreport.
I also have checked both:
Row Headers – “Repeat header rows on each page” and
Column Headers – “Repeat header columns on each page”
on General tab of Tablix properties of the main report.
If I have few detail lines in the subreport, so that all can be rendered on page one, everything is ok.
If I have more detail lines in the subreport so that it's not possible to print all on one page, the subreport renders from the fist page and moves on to page two, three and so on.
When I have more than one page of data in the subreport, it is also started on page one, and continues renders on second page and so on...
However, it doesn't show the main report's column/row headers on subsequent pages of the subreports?
I've noticed that when next item/ReportID starts in my main report group, it prints column header only on the first page but not any subsequent page and so on...
I also tried to check only ONE, either
Row Headers – “Repeat header rows on each page” OR
Column Headers – “Repeat header columns on each page”
on general tab of Tablix properties of the main report BUT didn’t work?
Any ideas how to print header info on each page when subreport has more than one page data?
Pagination is always fun in SSRS.
Have you looked at the page size/interactive of the subreport? This may stop the subreport paging, but I don't know if it's what you want.
An older article on pagination
And a newer one
Presently I am encountering the same problem. In a previous SSRS report we got it to work by putting our tablix inside a single-cell list item so that the headers were repeated. Now I am working on a different report, and when I try the same thing I'm getting this error:
[rsInvalidDetailDataGrouping] The tablix ‘tablixOpportunitySummary’ has a detail member with inner members. Detail members can only contain static inner members.
I've searched extensively, but this is the only link which indicates an known problem in SSRS. At the time of this post it contained 4 workarounds:
https://connect.microsoft.com/SQLServer/feedback/details/337720/katmai-reporting-services-2008-tablix-control-repeat-column-headers-does-not-work#
A little late, but I think this is what you are looking for:
You need to go to tablix properties > General and check the option Keep header visible while scrolling. Then go to column/row groups in the advanced mode, chose your static row and set the Fixed Data mode to True, Repeat on new page to True and Keep with group to After.
Here is probably the best reference: Here