I'm attempting to learn web development, and I'm taking an online course from udemy. I am still in the html coding stage and I don't get the correct attributes auto suggested when I type in "form" (without the quotes). I get this:
When the instructor does it, this is the result:
I'm certain I used to get the result the instructor got, but I don't now. I rolled back to version 1.33 of VS Code but that didn't help.
Any suggestions? I appreciate any and all help you can provide but please don't assume I can navigate to whatever setting needs to be changed Please provide the full path to allow me to get there! Thanks again.
So I just downloaded and installed Atom. When you type form and hit tab you get three attributes: class, action and method. I wonder why the defaults are different between the two editors. I prefer VS Code just for the visual appearance of it, and it seems to be the one everyone uses, but why the difference and is there a way to make them the same?
Related
When writing code in cshtml files, sometimes intellisense goes haywire and starts writing text several lines above where I am actually typing. At the moment it seems to be limited to when I hit the tab key to let it finish a property name which isn't too bad because I can just not do that. However, it also seems to happen at other times like just when I type #Model and then press a period it might write the word Model in some other part of the code file.
Anyone know how to correct this?
This would probably fit better as a VS Feedback item, but since this is the only place I have found someone referencing the same issue, I thought I would add some confirmation. I do not have a solution, only more examples to add. This issue has been annoying me for months! It seems to happen most often when typing razor code inside of JavaScript, especially inside of a quoted string.
Here is an example from a test project, where I am attempting to put a reference to a model field into a JavaScript string. Notice that I click tab a couple times and it doesn't actually insert the intellisense result at the point I am typing. But when I scroll down you can see it inserted it randomly in another spot pretty far away!
I did also try to remove the hidden .vs folder, bin/, and obj/ and could still reliably reproduce the issue after restarting Visual Studio. Currently on 1 before the latest (16.9.4). I did notice that if I re-open this cshtml file, wait until the file seems to be fully loaded (all the red errors go away), I also reliably get an ArgumentException that occurs as I begin typing. Then when I scroll down I already see that Model has been randomly inserted in another spot in the code.
I'm going to try updating to latest (16.9.5), and starting in Safe Mode to skip loading all 3rd-party libraries, and see if the issue is still reproducible, in case it is caused by one of the handful of extensions I am currently using.
Edit: Well same issue with 16.9.5. Trying to use Safe Mode is a no go, it makes the intellisense and syntax coloring completely disabled for .cshtml files.
I'm learning basic web dev and started with HTML, CSS, Bootstrap. Haven't touched PHP or anything server side yet.
What I've done so far is I've created a pretty basic registration form with 5 fields and what I'm trying to do is display the input of those fields in a table that I've created on another page. The submit button has the "method" and action. Now, I've Googled a ton to find some solutions and have gone through most of the questions of this site but I still can't find out to achieve what I'm trying to do without the use of PHP/JS.
So, is it even possible to read form data from another page like this without the use of JS/PHP? If so, how do I proceed and what needs to be done? I can post the source code but I don't think it's going to help since there isn't much there, everything else is working fine except for finding a solution to this.
Thank you.
You need a programming language.
If you want to do it entirely client-side, then that has to be JS.
If you want to do it server-side (which allows you to access the data and, optionally, make it available to other people, instead of limiting it to the user of the browser) then you can use any programming language at all (although JS and PHP are among the most common choices).
Since you are trying to create a registration page, you'll need to use server-side programming.
You necessarily need to use JavaScript / PHP.
Since you are just starting, I would highly recommend you to check out the W3Schools tutorials on HTML, CSS, JavaScript, PHP, Bootstrap and jQuery.
:)
So this is long gone but I was actually able to resolve my problem without using anything other than basic HTML , so here's how I did it for anyone else who's trying to find the answer to problem (probably not, you don't usually do this professionally and basically this was a challenge from a friend).
So, two things.
SessionStorage
LocalStorage
This is built-in to your browser and you can use it to achieve simple tasks by simply assigning values to it. They'll remain there and you can use however you want.
But, as the name implies, sessionstorage will only retain those values during the session (the time you have your browser open for) while localstorage can retain it indefinitely. Not sure if I can link other sites over here so just Google these terms to learn more and how to use them.
This is the first time I am trying to contribute to Mozilla. I went through several articles and documentation/resources to get a hang of what could be the best first steps to get started. I started off from this page http://whatcanidoformozilla.org1 and chose to start off with Java.
On initial tinkering I was taken to https://wiki.mozilla.org/Mobile/Get_Involved and eventually https://wiki.mozilla.org/Mobile/Fennec/Android/Suggested_workflow resource suggested that the best way to get started with it would be to pick up some simple bug and propose a patch for it.
So then I went to http://www.joshmatthews.net/bugsahoy/?java=1&simple=1 and this specific bug drew my attention. The description of the bug mentioned this :
There are some methods that we share (or can share) across our DB
implementations, like appending PARAM_SHOW_DELETED, PARAM_LIMIT, or
PARAM_PROFILE.
These are currently spread across LocalBrowserDB, TabsAccessor,
URLMetadata, and so on. It'd be nice to clean these up.
Question 1. Now how do I get some more context on what exactly is the bug and what is required to be done ?
As of now there seems to be 2 patches already submitted from what I understood (and please correct if my understanding is wrong here). So to get some context about the bug I went ahead and opened up the first patch submitted here.
It gave me some idea as to at least where exactly is the code itself that needs to be fixed. And I found it here
Question 2. Am I on the right track on how to figure out the code that needs to be fixed ?
Question 3. Even after reaching the DBUtils.java file I could not find any documentation about what the class basically does, or where does it fit into the whole picture. Could someone please help me with this, as to how do I figure out what a class is supposed to be doing etc. or at least some documentation around it?
You're on the right path. Basically, the What Can I Do For Mozilla website is a quick and easy way to let you discover projects you might be interested in, so it's the first gateway to the coding contributions.
That said, you did good in picking a bug to start off. However, as you saw the bug was already being worked on by somebody else (marked as Assigned). Your best bet is to find some new "good first bug" to work on. This might be a complicated task, as Bug's Ahoy shows only a few not owned good first bugs.
You should try to get in touch with the Fennec team, either via email or IRC (the latter for quicker responses).
Now, to answer your questions, in a more general way
Question 1. Now how do I get some more context on what exactly is the
bug and what is required to be done ?
Usually, this should be described in the first comment in the bug, on Bugzilla. If that's not the case, feel free to drop a message there and ask for more directions. You can also flag the reporter or the mentor of the bug using the needinfo functionality, as they are usually better shown.
As you can see, somebody asked for more info in comment 1 and some new directions were given.
In general, you won't find a patch with code on the bug itself, but you might find links to files and more precise directions on what to change and how. If not, again, feel free to ping the reporter and/or mentor.
Question 2. Am I on the right track on how to figure out the code that
needs to be fixed ?
You're on the right path. In general, if there are no links to files or DXR on the bug, but some code is mentioned, you can look it up using DXR, as you did.
Question 3. Even after reaching the DBUtils.java file I could not find
any documentation about what the class basically does, or where does
it fit into the whole picture. Could someone please help me with this,
as to how do I figure out what a class is supposed to be doing etc. or
at least some documentation around it?
What I usually do when navigating the Firefox code and need some more background on a not so well documented class, is browse the change log for that file, clicking on the Log button in the top-right panel on DXR (when displaying the file). It will show you a list of bugs that affected the file. You can even trace back the original file that implemented it, to get more context.
On the other hand, if you're only interested to the history of a single line of code within a file, then the blame tool is your friend. It tells you who last touched the line, the changeset and the related bug number. That is also accessible from where you can find the Log, here.
In the case of DBUtils.java, however, it looks like the class just holds some utility functions for database access.
To see how something is being used within the Firefox codebase, you can still use DXR. Here's a sample search for the DBUtils object.
I've been playing with an order tracking system which was created by one of an ex-employee. Well, nothing major but just a simplified system. I manage to find most of the things re-linking to new database, editing layout... etc. However, what I am struggling to understand is as seen below;
As seen on the image test 1 is the actual access file I have copied and made most of the changes to reflect test 2. However, as circled in red above (where test 1 is shown), is what I'm trying to find and edit. I'm not sure whether I'm searching correct terms but it seems I couldn't find any relative queries to fix this issue. Any advise will be a great help!
File->Options->Current Database->Application Title
I inherited a web site project that includes mootools.js (about 40k) in most of the scripts. However, I have not seen, intuitively, where it is being used and given the nature of this porject, ahem, I'm thinking it might not be being used at all!
I'm "under the gun" to ship this tonight (yup, it's a pre-Thanksgiving release). I have not used mootools.js so I'm not sure what to grep for or if there's a sure tell way to determine this. I don't want to have to JSLint it (or do I LOL). Any suggestions would be appreciated. Thanks.
Mootools grafts itself onto some of the native js stuff, so it might be hard to do just by code inspection unless you are very familiar with what MooTools gives you.
Remove it, run your automated tests.
Cause you have those, right?...
Remove it and see if anyone complains.
(You could try it on a test machine first, if you're not feeling brave.)
You can check your source code on some MooTools methods, for example, addEvent().
If it is used so here is the Mootols :)
Just check from the home page of http://mootools.net/
I also was interested on one site why they use jquery and mootools. So, I found addEvent() method. It is Mootols method.
You must have a dev version of the site. Just pull it out and go over pages see if stuff breaks. Mostly you will get unknown function type stuff, if there is any dependencies. Firebug is your friend.
1, Open firebug
2, Click the DOM tab
3, Check if the Mootools object exists (It will say the current version of mootools next to it).
Hope this helps
:)