I have a question here, the attached screen shot
SELECT
intvw.Tran_no RequestNo, stkdl.std_tran_no RamcoTranNo,
stkhd.sth_tran_date TranDate,
intvw.Bg_Code ItemCode, intvw.reqdqty ReqQty,
stkdl.std_tran_quantity TransferQty,
stkdl.std_from_lot_no, (intvw.reqdqty-stkdl.std_tran_quantity) * -1 Varience,
intvw.From_Wh_Code FromWH, intvw.To_Wh_Code ToWH
FROM
res_his_interface_stock_vw intvw
LEFT JOIN
skm_stocktransfer_dtl stkdl ON intvw.Tran_no = stkdl.std_tran_no
AND intvw.Bg_Code = stkdl.std_item_code
AND intvw.From_Wh_Code = stkdl.std_from_wh_code
LEFT JOIN
skm_stocktransfer_hdr stkhd ON stkhd.sth_tran_no = stkdl.std_tran_no
AND stkhd.sth_tran_date BETWEEN '2020-01-19 00:00:00.000' AND '2020-01-19 00:00:00.000' -- datatype: datetime
AND stkhd.sth_status = 'AU' -- checks transaction authorised or not
WHERE
intvw.From_Wh_Code = 'MAINSTRS'
--AND stkhd.sth_tran_date BETWEEN '2020-01-19 00:00:00.000' AND '2020-01-19 00:00:00.000' -- removes the null rows.
AND intvw.Tran_no = 'R0000085590' -- if commented all rows instead of date range.
ORDER BY
1 DESC
When I keep the date range and tran_no, the below results appear, the moment comments on tran_no and try to see the result for the given date range, instead of it, it gives all data from day one till date.
I don't get know what's wrong here, please help.
Related
I have read a bunch of ways that has gotten me this far. But I can't get to the finish line.
I have a table of coupon codes. I want to use one transaction to select the next available code, mark it as used and input the order number. I can get the update and nested select to work, but I cannot figure out how to actually return the coupon code from the select. It just returns 1 row updated.
Here's what I've got:
UPDATE `prcoupon` pr
SET
`pr`.`status` = '1',
`pr`.`invoicenumber` = '09990002'
WHERE
`pr`.`couponCode` = (SELECT
`prcoupon`.`couponcode`
FROM
`prcoupon`
WHERE
`status` = 0
LIMIT 1)
Sample data
What I need returned is: couponCode: SL2T-03A0-JVCY-W2XMXG
If I understand correctly, you can try to use UPDATE ... JOIN with ROW_Nunber windwon function.
UPDATE prcoupon pr
JOIN (
SELECT *,ROW_NUMBER() OVER(ORDER BY couponCode) rn
FROM prcoupon
WHERE status = 0
) t2 ON pr.couponcode = t2.couponcode
SET pr.status = 1,
pr.invoicenumber = '09990002'
WHERE rn = 1
sqlfiddle
Currently when I look at the expiry date section for insurance on my MSReport Builder it is 03/04/2017, but the expiry date section for my insurance in CRM is 04/04/2017 which is the correct and right, however in the report it is 1 day behind, therefore I was wondering why and what might be the fix to this? because I want it to show the same as CRM 04/04/2017, I've been researching and some articles said use UTC THE ONE THAT DONT START WITH 23 hours, not entirely sure how to put this in my query, I’m in the UK, and CRM options are for already set for UK as I checked it already. Again, please advise fix to this?
SELECT 'PAS ' +
SectionName AS SectionName,
SectionKey,
FormName,
ItemName,
ImportSequenceNumber,
ExpiryDate,
ExpiresOn,
#Param_MonthlyStatement_EntityRecordId AS AccountId
FROM
(SELECT
sect.mm_name AS SectionName,
sect.mm_key AS SectionKey,
frm.mm_name AS FormName,
frm.mm_name AS ItemName,
frm.mm_importsequencenumber AS ImportSequenceNumber,
MAX(frmans.mm_expires) AS ExpiryDate,
DATEADD(m, 2, GETDATE()) AS ExpiresOn
FROM Filteredmm_section AS sect INNER JOIN
mm_form AS frm ON sect.mm_sectionid = frm.mm_section INNER JOIN
mm_formanswer AS frmans ON frmans.mm_form = frm.mm_formId INNER JOIN
Account AS acc ON frmans.mm_AccountID = acc.AccountId
WHERE (sect.mm_name LIKE '%-%')
AND (sect.mm_parentsection IS NULL)
AND (CONVERT(NVARCHAR(250), frmans.mm_AccountID)
= #Param_MonthlyStatement_EntityRecordId)
AND ( acc.mm_supplier = 1)
GROUP BY sect.mm_name, sect.mm_key, frm.mm_name, frm.mm_importsequencenumber
HAVING (MAX(frmans.mm_expires) BETWEEN GETDATE() AND DATEADD(m, 2, GETDATE()))) AS t1
WHERE (NOT EXISTS (SELECT TOP (1) mm_accountid FROM Filteredmm_formanswer
WHERE (mm_formname = t1.FormName) AND (mm_accountid = #Param_MonthlyStatement_EntityRecordId) AND (mm_statusname = 'Awaiting Verification')))
ORDER BY SectionName, FormName, ImportSequenceNumber
You might want to get the expiry date from the filtered table, because I can see there is a filtering used, perhaps try
INNER JOIN Filteredmm_formanswer AS frmans ON frmans.mm_form = frm.mm_formId
I'm looking for a way to order my results based on the actual time. In my table yo can see values like:
1,23:45
2,9:45
3,27:43
When I do a query I would like to know how to order them based on their actual 24 hour time.
Ex:
3,3:43
2,9:45
1,23:45
Notice how it changes 27:43 to 3:43, and creates the order.
Where I am using it, in this query:
SELECT *,COALESCE(ADDTIME(s.`departure_time`,SEC_TO_TIME(rt.delay)),s.`departure_time`) as `rt_time` FROM `stop_times` s INNER JOIN `trips` t ON s.`trip_id` = t.`trip_id` INNER JOIN `stops` st ON st.`stop_id` = s.`stop_id` INNER JOIN `routes` r ON r.`route_id` = t.`route_id` LEFT JOIN `rt_trips` rt ON t.`trip_id` = rt.`trip_id` where (s.`stop_id` = 'CB900') and ( ( s.`departure_time` >= '00:50' and s.`departure_time` <= '05:50') OR ( s.`departure_time` >= '24:50' and s.`departure_time` <= '29:50') ) and (s.`pickup_type` = '0') and (t.`service_id` IN ('removed to make it easier')) HAVING (`rt_time` BETWEEN '01:50' and '05:50' ) ) OR ( `rt_time` BETWEEN '25:50' and '29:50' ) ORDER BY `order` ASC
Explanation:
Information is a transit schedule, that may go forward onto the next day which may be a saturday. So, times may become 25:50, where that means 1:50 the next day.
Thanks
Cyrus
Hmmm, if you just want to get a value between 0 and 24 hours, then I would do:
select concat(mod(substring_index(time_column, ':', 1) + 0, 24), ':',
substring_index(time_column, ':', -1)
)
Try this function on the time_column
concat(mod(substr(time_column,1,INSTR(time_column, ':')-1),24)
,substr(time_column,INSTR(time_column, ':'),3)
)
You might need to cast date to string to integer, do the maths, and again cast it to time. But the fiddle version seems to work properly on varchar to integer conversion. Check this
http://sqlfiddle.com/#!9/ff60f9/1
My task is to get the records between 2fromdate and todate(given as a input parameters).
i am not able to use between operator for 2 input parameters...
My query as follows...
DELIMITER $$
CREATE DEFINER=`testrunner`#`%` PROCEDURE `usp_GetAllTranasactions`(pFromDate nvarchar(30),pToDate nvarchar(30),pstatus int)
BEGIN
select
ST.UserID,U.Username,
ST.SubscriptionID,
ST.DateOfSubscription,
SM.SubType,
SM.Details,
ST.Amount,
ST.EndDate,
ST.Status
from tr_t_subscriptiontransactions ST
Join tr_m_users U on U.UserID=ST.UserID
join tr_m_subscription SM on SM.SubscriptionID=ST.SubscriptionID
where **ST.DateOfSubscription between (pFromDate and pToDate) and ST.EndDate
between(pFromDate and pToDate) and ST.Status=pstatus;**
END if;
END
here i don't know how to use between parameters..plz help me..i want to retrive record between fromdate and todate..hope u understand..
Let us assume you want all transactions for the month of June 2014
In your user interface the parameter values are:
from_date = 2014-06-01
to_date = 2014-06-30
But you will evaluate against a transaction date & time. How do you ensure that absolutely every transactions on June 30 - right up to midnight - is included in the results?
Here is how: use 2014-07-01 instead of 2014-06-30, and here is what the query would look like - which does NOT use between!
SELECT
ST.UserID
, U.Username
, ST.SubscriptionID
, ST.DateOfSubscription
, SM.SubType
, SM.Details
, ST.Amount
, ST.EndDate
, ST.Status
FROM tr_t_subscriptiontransactions ST
JOIN tr_m_users U
ON U.UserID = ST.UserID
JOIN tr_m_subscription SM
ON SM.SubscriptionID = ST.SubscriptionID
WHERE (ST.DateOfSubscription >= pFromDate AND ST.DateOfSubscription < pToDate + 1)
AND (ST.EndDate >= pFromDate AND ST.EndDate < pToDate + 1)
AND ST.Status = pstatus
;
AVOID between for date ranges because it INCLUDES both the lower and upper boundary values.
... equivalent to the expression (min <= expr AND expr <= max)
http://dev.mysql.com/doc/refman/5.0/en/comparison-operators.html#operator_between
What this can lead to is an "anti-pattern" which look like this:
where dt_field between '2014-06-01 00:00:00' and '2014-06-30 23:59:59'
but there are time units smaller than one second, so that approach is imperfect. Don't attempt to overcome the deficiencies of between by adjusting the upper value this way. The simple and more accurate approach is to use >= and < adjusting the upper value by one whole time unit (usually the next day).
Hi i have the following SQL question:
SELECT station_id, filling_station_status,date_created ,
case when filling_station_status="FREE" then 0
else 1 end as status
FROM efahrung.electric_station_time_status
where station_id=11
In my table have a column filling_station_status.
It can be "FREE" or "IN_USE".
I want to group elements so, that if the filling_station_status is changed (from "FREE" to "IN_USE") it will create a date range in my case, date_created.
In the next change again from ("IN_USE" to "FREE") it creates a new date range.
Thanks for a suggestions.
If you just need SQL query to generate date range in output, then try this:
Select s.station_id,
Coalesce(e.filling_station_status, s.filling_station_status) fillingStationStatus,
case e.filling_station_status
when "FREE" then 0 else 1 end status,
s.date_created startDate,
e.date_created endDate
From efahrung.electric_station_time_status s
Left Join efahrung.electric_station_time_status e
On e.station_id = s.station_id
and s.filling_station_status = 'IN_USE'
and e.filling_station_status = 'FREE'
and e.date_created =
(Select Min(date_created)
From efahrung.electric_station_time_status
Where station_id = s.station_id
and date_created > s.date_created)