I am using VS Code to write some HTML. I noticed that the IDE will auto-insert some code for me. For example, if I want a <p> tag, VS Code will create <p></p> for me and the cursor will land in the middle (between the opening and closing paragraph tags). However, when I am done typing the content inside the <p> tags, typically, I use my mouse or the directional right-arrow to move to the end. Is there a way to not move my fingers from the typing positions (e.g. fdsa and jkl;) to go to the end of the line or tag, or would I always have to use the mouse or directional pad?
I find IDEs like what JetBrains provide do not have this limitation for certain languages. For example, in Python, if I want to print something using PyCharm, I can type (the closing single quote and right parenthesis are auto-added)
print('')
My cursor will land inside the single quotes. To simply get outside the closing parenthesis, I simply type in ' followed by ) and the IDE is smart enough to know to not place the single quote and closing parenthesis there (it's like using the right arrow twice to get outside the print statement).
WebStorm, like VS Code, has the "problem" when dealing with HTML. If I am inside an opening and closing <p> tag, and right next to the closing one </p>, simply typing <, /, p, > will not land me outside (as with Python and PyCharm). On Windows, I can press the End key or on Mac I can press fn+right to get to the end; but that requires breaking the flow and continuity of my hands in the typing positions (eyes have to be redirected too).
Any tips on how to be a more productive coder using VS Code or other modern IDEs with HTML? Are there plugins that we may use to address this problem?
You can paste this code in your keybindings.json file in vs code
ctrl+RightArrow ....>>> for Move cursor to Line end
ctrl+LeftArrow ....>>> for Move cursor to Line start
alt+RightArrow .....>>> for moving cursor word by word
alt+LeftArrow ....>>> for moving cursor word by word
Just paste this code into your keybindings.json in vs code
[
{
"key": "alt+right",
"command": "cursorWordEndRight",
"when": "textInputFocus && !accessibilityModeEnabled"
},
{
"key": "alt+left",
"command": "cursorWordEndLeft",
"when": "textInputFocus && !accessibilityModeEnabled"
},
{
"key": "ctrl+right",
"command": "cursorLineEnd"
},
{
"key": "ctrl+left",
"command": "cursorLineStart"
},
]
Make sure to adjust commas and brackets, if there is already some code.
Simply go look it up or change it in your key binding settings:
File > Preferences > Keyboard shortcuts
It's named cursorLineEnd.
Same can be done for cursorLineStart of course.
Interfering other shortcuts can be changed or deleted as well in that menu.
I often just use <CTRL> + → (right arrow) a few times to quickly navigate past words and code blocks. It won't immediately get you to the end but if there isn't a ton of code after your current cursor location, a few quick uses of this keystroke can be faster than lifting your hands and checking with eyes to find the key.
Depending on what your keyboard layout is, this could be faster. Personally, if it's a big issue, I would second other posters here and add a custom keybind / hotkey to a lesser-used key nearby.
//Begin CAVEAT
I'm not mentioning just using the <END> key here as a solution purposefully, since you indicated that using that using keys too far from home row broke your flow. Depending on my keyboard layout, that is often the fastest option by far, however my current keyboard makes that a non-starter.
Part of the issue here is that people's experience is so different based on what keyboard they're using, as well as hand size and dexterity. YMMV with any solutions we mention that isn't a custom keybind.
//END CAVEAT
Cmd + Right
This will go to the end of you current line.
Tips:
Hold down shift to start a selection
Use Alt or Ctrl instead of Cmd to change the distance the cursor travels
If you want to go to the end of a line, just press the End button on the keyboard, and press Home to go to start of a line.
Change the key binding for cursor down to Shift + Space. I didn't remap right Arrow for reasons I'll explain shortly, but I could have easily done that as well.
When I code, I like to use indented formatting. So, when I type <p> and </p> is automatically generated, I go one step further and press ENTER. By default, that causes </p> to move to the same indention level as <p> on the line below my cursor, and puts my cursor on an indented line below <p>. Gif for reference:
Shortcut to make an indented block:
That leaves my fingers basically on the home keys, because when I'm done in that level, I'll press Shift + Space to go to the line below, where the ending tag will be, and then I can press ENTER a couple times as normal and create a new tag or whatever else I'll be adding to the file.
If you would like to set up your key bindings like mine, or do something slightly different, here is what I did:
Ctrl + K Ctrl + S (to open key bindings)
Search for "cursorDown"
Highlight the row and press ENTER
Press Shift + Space
I'm not sure which OS you specifically use being that you mentioned but an OS agnostic approach is to create your own keybind / key chord (sequence).
A key chord is essentially a way to use another 'layer' of key shortcuts, if you use your imagination for lingo. To illustrate: consider CTRL + S is a keyboard shortcut. Now consider CRTL + K chord CTRL + S, which is a completely different shortcut even though you use the same sequence.
Consider an edit/insert mode
I don't use vim, nor have I ever tried, but I really find value in the idea of having different 'modes', one visual one for insert and edit. Personally, I have elected CTRL + E to be my chord sequence for 'edit mode'. Now, every single key and sequence of keys becomes a brand new possability. Why CTRL + E? Well 'e' for edit, naturally, but also because it is default duplicate; for whatever reason vscode identifies this shortcut to be the same as CTRL + P by default.
I then use $ to go to the end of the line and ^ to the beginning, arbitrarily because of regex, but the point is you can create your own according to your own preference, which appears to be that of the home row. So if you elect to go this approach you can use j if you want. If you were to argue this is too much user input for a single action, consider the position of using a PC at home and a mac at work, as I do, you would already be comfortable with your settings and not need to 're-learn' shortcuts.
This answer uses an approach that affords you the creative freedom to define what a 'productive coder' looks like for you, provides a different approach to going to the end of line while maintaining your home row position, and hopefully demonstrates to any new vscoders that you are not bound to just using the native CTRL + K sequence as the chord identifier.
Regardless, re:
without using ... some key combinations?
That's unavoidable, I think, unless you choose to remap normal typing keys for this purpose
If you like to stick to the home row and do not want to use arrow keys,
you can customize your keyboard shortcuts.
paste the below code to your keybindings.json file in vs code.
Feel free to customize these shortcuts by changing key combinations.
,{
"key": "alt+l",
"command": "cursorEnd",
"when": "editorTextFocus"
},
{
"key": "alt+j",
"command": "cursorHome",
"when": "editorTextFocus"
}
For me it is Fn + -> (Right Arrow Key) that's the quickest possible approach
No need to do these messy things, just use your keyboard's home key and end key
Press the home key to go to the beginning of the line
Press the end key to go to the end of the line
I have this task that I need to complete fast as possible. I have coupon codes (over 1000), I going to create an array out of it. To do that fast as possible I need to be able select multiples lines and edit them at the same time. I am using Atom as my editor choice. I tried to search online for answers but non found.
ST55672
SE82673
SS85074
SD65675
SH75676
to:
"ST55672",
"SE82673",
"SS85074",
"SD65675",
"SH75676",
PS. Im using Mac
1. Atom Commands
Select all text (Cmd+A on Mac, Ctrl+A elsewhere), then use the shortcut to “split the selection into lines” (Cmd+Shift+L on Mac, Ctrl+Shift+L elsewhere). Both commands are also available from the command palette.
PS: like many other keyboard shortcuts, these also work in Sublime Text
2. RegEx Search & Replace
Search for ^(.*)$ and replace with "$1",.
Notice for windows users:
multiline cursor works using these keys in the following order :
CTRL + ALT +
and ↓, or ↑, or a mouse "Click" any where you need
select all lines
Go to selection menu on the top bar (win & Linux)
select split selection into lines
Is there an option highlighting all strings matching the actual selection in PhpStorm (like in SublimeText) ?
You can use Ctrl + Shift + F7 for this in PhpStorm.
This will highlight all usages of selected text.
Using built-in functionality: select text and hit Ctrl + F that will bring "Find in page" functionality: it will highlight all matches of selected text in this document. But it's not always convenient as you have to hit extra keys and have "find in page" bar open...
You can install and use BrowseWordAtCaret plugin that will automatically highlight word under caret in whole document (regardless of it's nature -- variable or just plain text) + you can easily navigate between all matches.
P.S.
You have mentioned that "I'm used to regularly change the name of an object property, an array key or a parameter name at multiple places in same document."
Consider using Refactor | Rename for variables/class members/etc -- it works across multiple files.
The situation is: in my html-file I have a lot of "href" attributes to be filled with specific links. And I can get multiple cursors on every needed place.(via Ctrl+D, or Alt+Enter).
Now it would be very helpful if I could switch between this cursors with tab(like emmet plugin does with self-generated html-content, if you know what I'm talking about).
You can have multi cursor, and switch between them in using :
Ctrl + F3
or
Ctrl + Shift + F3
You can get the behavior I believe you want by selecting all the "href" attributes using ctrl+d. If you are selecting all of them, you cna run the find_all_under command (alt + f3 in windows, unsure of other platforms but you can search for the command). Then, bookmark the cursor positions (ctrl+f2 in windows). You can then use f2 to cycle through the bookmarks. You could bind the appropriate command to tab if you want also, though you would have to do some work do you don't break normal tab behavior.
As a side note, I believe emmet simply inserts a snippet, so it defines various locations for the cursor to jump to through the built in snippet behavior.
#Jahnux solution may be more ideal since you wouldn't have to select initially, but I believe you would have to move the cursor back to the "href" attribute for continuing to the next token.
You may also want to investigate simply using the find functionality, though perhaps you have run into some limitations with that.
In most other editors, I can select a portion of the text I want to run find and replace on and then hit the ctrl + h combination. A screen pops up asking me what to find and what to replace. How do I do this in PHPStorm?
If you are using the Default keymapping (you can also use the keymaps for Eclipse, Visual Studio, etc) press Ctrl+r to show the Replace Toolbar. If you already have a selection then the option In Selection will already be checked, otherwise you can check it and then do your selection (if you select first and check the option second it will unselect the text after checking the option).
The feature is called Replace in the Keymap configuration if you wish to change the shortcut.
You can also press Shift+F6 to directly rename variables if that's what you want to do.
Highlight the code selection you wish to work on
( you can use alt + arrow up if your looking for a cool way to do that)
Press Ctlr + r on PC or Command + r on a Mac
In the upper options window, insert the values you wish to replace
Select the "in selection" check box
Press Replace/Replace all button