On make I get this error:
libtool: Version mismatch error. This is libtool 2.4.6.42-b88ce, but the
libtool: definition of this LT_INIT comes from libtool 2.4.6.
libtool: You should recreate aclocal.m4 with macros from libtool 2.4.6.42-b88ce
libtool: and run autoconf again.
I run aclocal && autoconf && ./configure && make -j4.
I make again and I get the same error! Very unexpected...
I started examining generated libtool script.
# Which release of libtool.m4 was used?
macro_version=2.4.6
macro_revision=2.4.6
...
PROGRAM=libtool
PACKAGE=libtool
VERSION=2.4.6.42-b88ce
package_revision=2.4.6.42
So the issue is these .42-b88ce and .42 suffixes. Where do they come from?
I re-installed libtool with apt-get.
I check its version.
dev0#DESKTOP-KK30DO1:~$ apt list --installed | grep libtool
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
libtool/stable,now 2.4.6-9 all [installed]
Here we see that it is actually 2.4.6-9, i.e. with -9 suffix.
Okay... What is going on here? Where do these .42-b88ce and .42 suffixes come from? How to solve the error? Please help to understand the issue.
P.S. System info (uname -a):
Linux DESKTOP-KK30DO1 4.19.0-6-amd64 #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20) x86_64 GNU/Linux
Replying to myself.
These suffixes were in the initial ltmain.sh distributed within the library package that I'm trying to build. The reason of these suffixes is likely that the previous developer have built libtool from the source code (so b88ce and .42 suffixes can be the hash of the last commit and the patch number).
The solution is to re-generate ltmain.sh by executing libtoolize [1]. Please note that OSX users should use glibtoolize (since OSX has its own command with the similar name libtool).
The final build sequence is:
libtoolize && aclocal && autoconf && automake && ./configure && make -j4
References:
https://www.gnu.org/software/automake/manual/html_node/Error-required-file-ltmain_002esh-not-found.html
Related
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 1 year ago.
Improve this question
I would like to set up AMD Radeon for Deep Learning on Ubuntu. The main libraries for my work are keras and pytorch. I followed strictly on ROCm installation guideline here but failed at the 3rd step with the command sudo apt install rocm-dkms. Error messages were shown as follows.
Setting up dkms (2.8.1-5ubuntu1) ...
Setting up hip-rocclr (4.0.20496.5685.40000-23) ...
Setting up rock-dkms (1:4.0-23) ...
Loading new amdgpu-4.0-23 DKMS files...
Building for 5.8.0-41-generic
Building for architecture x86_64
Building initial module for 5.8.0-41-generic
Error! Bad return status for module build on kernel: 5.8.0-41-generic (x86_64)
Consult /var/lib/dkms/amdgpu/4.0-23/build/make.log for more information.
dpkg: error processing package rock-dkms (--configure):
installed rock-dkms package post-installation script subprocess returned error
exit status 10
Setting up g++-9 (9.3.0-17ubuntu1~20.04) ...
Setting up g++ (4:9.3.0-1ubuntu2) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mo
de
Setting up build-essential (12.8ubuntu1.1) ...
dpkg: dependency problems prevent configuration of rocm-dkms:
rocm-dkms depends on rock-dkms; however:
Package rock-dkms is not configured yet.
dpkg: error processing package rocm-dkms (--configure):
dependency problems - leaving unconfigured
Setting up gcc-multilib (4:9.3.0-1ubuntu2) ...
No apport report written because the error message indicates its a followup erro
r from a previous failure.
Setting up g++-9-multilib (9.3.0-17ubuntu1~20.04) ...
Setting up g++-multilib (4:9.3.0-1ubuntu2) ...
Processing triggers for sgml-base (1.29.1) ...
Setting up x11proto-dev (2019.2-1ubuntu1) ...
Setting up libxau-dev:amd64 (1:1.0.9-0ubuntu1) ...
Processing triggers for libc-bin (2.31-0ubuntu9.2) ...
Processing triggers for man-db (2.9.1-1) ...
Setting up libxdmcp-dev:amd64 (1:1.1.3-0ubuntu1) ...
Setting up x11proto-core-dev (2019.2-1ubuntu1) ...
Setting up libxcb1-dev:amd64 (1.14-2) ...
Setting up libx11-dev:amd64 (2:1.6.9-2ubuntu1.1) ...
Setting up libglx-dev:amd64 (1.3.2-1~ubuntu0.20.04.1) ...
Setting up libgl-dev:amd64 (1.3.2-1~ubuntu0.20.04.1) ...
Setting up mesa-common-dev:amd64 (20.2.6-0ubuntu0.20.04.1) ...
Setting up rocm-opencl-dev (3.6Beta-17-g875c1f8-rocm-rel-4.0-23) ...
Settin XT g up rocm-clang-ocl (0.5.0.64-rocm-rel-4.0-23-50fb51a) ...
Setting up rocm-utils (4.0.0.40000-23) ...
Setting up rocm-dev (4.0.0.40000-23) ...
Processing triggers for libc-bin (2.31-0ubuntu9.2) ...
Errors were encountered while processing:
rock-dkms
rocm-dkms
E: Sub-process /usr/bin/dpkg returned an error code (1)
My kernel version is 5.8.0-41-generic. My VGA card is Gigabyte Radeon RX6900 XT. My CPU is AMD Ryzen 9 3900 XT. I tried several solutions suggested in previous posts but it did not solve my problem. May I have your suggestions to fix this.
I've been having the same issue as well. The only way I found to fix it is to roll back to the 5.6.0-1042-oem kernel. The AMD drivers don't seem to support any kernel past this one.
Edit: This is also a way to get the amdgpupro drivers to install without a problem.
WARNING: I'm writing all this after the fact and i might have missed a step or something along the way. Please be very careful especially with trying to remove kernels and when working in your boot directory. If you're uncomfortable with the idea of wrecking your system you can always set grub's default selection which is a lot safer than removing an initramfs.
Here's how I got RocM working
sudo apt install linux-image-5.6.0-1042-oem linux-headers-5.6.0-1042-oem && reboot
Make sure you boot into the 5.6 kernel by accessing the Ubuntu advanced options in grub.
sudo apt remove linux-image-5.8.0-41-generic linux-headers-5.8.0-41-generic && sudo apt autoremove && reboot
Again you'll have to reboot into 5.6 through the advanced options. (Hold the shift key after BIOS finishes loading to get the Ubuntu Advanced Options menu.) After you're back in it's a good idea to set your headers and image as held back because a kernel update will most likely break RocM.
sudo apt-mark hold linux-image-generic linux-headers-generic
Now we're going to try and flush out the 5.8 kernel. Start by flushing out the temporary files.
sudo rm -rv ${TMPDIR:-/var/tmp}/mkinitramfs-*
Now list all of the kernels installed.
dpkg -l | tail -n +6 | grep -E 'linux-image-[0-9]+'
And try to remove the 5.8 kernel. Do this for any kernel you have above the 5.6 one we installed.
sudo update-initramfs -d -k 5.8.0-41-generic
Now the initramfs, Systemmap, and config are still present in the boot dir so we need to clear those out to get grub working properly again.
cd /boot/
sudo rm vmlinuz-5.8.0-41-generic System.map-5.8.0-41-generic config-5.8.0-41-generic
Now you should be finally ready to update grub
sudo update-grub && reboot
Now when you load back in you should be able to install RocM
sudo apt install rocm-dkms
As per the official notes in this link, AMD ROCm platform is designed to support Ubuntu 20.04.1 (5.4 and 5.6-oem) and 18.04.5 (Kernel 5.4).
So kernel version 5.8 is not supported. However, downgrading is an option but instead of rushing to that, you can simply boot into an older version of kernel.
Try following steps:
Restart your computer,
Wait for the grub menu to open (how to open grub menu: link).
Select advanced options for ubuntu
Select an alternate kernal from the list shown.
I'm trying to install CUDA 7.0 on Ubuntu 14.04. I've followed the installation instructions as outlined here. Specifically, I've followed steps in section 3.6 and Chapter 6. While compiling the examples (Section 6.2.2.2) using make, I'm getting the following error:
make[1]: Entering directory `/usr/local/cuda-7.0/samples/3_Imaging/cudaDecodeGL'
/usr/local/cuda-7.0/bin/nvcc -ccbin g++ -m64 -gencode arch=compute_20,
code=compute_20 -o cudaDecodeGL FrameQueue.o ImageGL.o VideoDecoder.o
VideoParser.o VideoSource.o cudaModuleMgr.o cudaProcessFrame.o
videoDecodeGL.o -L../../common/lib/linux/x86_64 -L/usr/lib/"nvidia-346"
-lGL -lGLU -lX11 -lXi -lXmu -lglut -lGLEW -lcuda -lcudart -lnvcuvid
/usr/bin/ld: cannot find -lnvcuvid
collect2: error: ld returned 1 exit status
make[1]: *** [cudaDecodeGL] Error 1
make[1]: Leaving directory `/usr/local/cuda-7.0/samples/3_Imaging/cudaDecodeGL'
make: *** [3_Imaging/cudaDecodeGL/Makefile.ph_build] Error 2
If you notice, there is -L/usr/lib/"nvidia-346". In my case, I have installed nvidia-349. What worked for me is to edit NVIDIA_CUDA-7.0_Samples/3_Imaging/cudaDecodeGL/findgllib.mk and change UBUNTU_PKG_NAME = "nvidia-346" to nvidia-349.
In order to properly install CUDA 7.0 on Ubuntu 14.04, you need a nvidia driver version 346 or higher.
If you're using the .deb installation method, the nvidia graphics driver is installed automatically.
If you used the .run file installation method and chose not to install the nvidia driver, you can manually install the driver afterwards through the package manager:
sudo apt-add-repository ppa:xorg-edgers/ppa && sudo apt-get update
sudo apt-get install nvidia-346 nvidia-346-dev nvidia-346-uvm libcuda1-346 nvidia-libopencl1-346 nvidia-icd-346
In my case, I installed nvidia-352 afterwards due to a bug in nvidia-346 and I stumbled upon the same error.
andoum's approach of manually changing the hard-coded UBUNTU_PKG_NAME = "nvidia-346" to UBUNTU_PKG_NAME = "nvidia-352" in NVIDIA_CUDA-7.0_Samples/3_Imaging/cudaDecodeGL/findgllib.mk worked fine for me.
I met the same issue and solution is that put path of nvidia into system path:
sudo gedit /etc/environment
add these path into environment
LIBRARY_PATH=/usr/lib/your_nvidia_edition:$LIBRARY_PATH
In fact I have encountered this problem when I made a make. I installed Cuda 8.0 under my Ubuntu 16.04. This problem had been confusing me for several weeks and I was almost tending to reinstall ubuntu for that after reviewing many suggestions via google, but finally I addressed it myself recently.
First of all, you should replace all the UBUNTU_PKG_NAME= ##nvidia-3xx## to the one of your actually installed nvidia driver version as recommended above. Then you will probably get compiling error after you do a new make. In my case, I have the link errors like
/usr/bin/ld: warning: libGLX.so.0, needed by /usr/lib/nvidia-
375/libGL.so, not found (try using -rpath or -rpath-link)
/usr/bin/ld: warning: libGLdispatch.so.0, needed by /usr/lib/nvidia-
375/libGL.so, not found (try using -rpath or -rpath-link)
....
or whatever contains missing link errors. Do locate the files you miss like
$ locate libGLX.so.
/usr/lib/nvidia-375/libGLX.so.0
/usr/lib32/nvidia-375/libGLX.so.0
$ locate libGLdispatch.so.0
/usr/lib/nvidia-375/libGLdispatch.so.0
/usr/lib32/nvidia-375/libGLdispatch.so.0
The error above is probably caused the compiling files cannot find in the default cuda libraries as you set, so you just need to copy the missing files to /usr/lib/nvidia-3xx/ (the actual path in your case) and this should work(it works in my case), if it doesn't maybe you could try to link the new add files to the one that need using a
$ sudo ln -s (requested file) (requesting file).
Hope this will help.
Long story short is I foolishly installed OSX-gcc-installer about a month ago and at first it prevented me, I believe, from installing Ruby gems on my machine. With the help of someone I did get this one issue fixed. Going through other the other posts on this website I was not able to find the solution that I'm looking for, so I decided to post here.
When I run brew doctor I get the following:
albys-mbp:folder alby$ brew doctor
Please note that these warnings are just used to help the Homebrew maintainers
with debugging if you file an issue. If everything you use Homebrew for is
working fine: please don't worry and just ignore them. Thanks!
Warning: You have an outdated version of /usr/bin/install_name_tool installed.
This will cause binary package installations to fail.
This can happen if you install osx-gcc-installer or RailsInstaller.
To restore it, you must reinstall OS X or restore the binary from
the OS packages.
Warning: Broken symlinks were found. Remove them with `brew prune`:
/usr/local/bin/aclocal
/usr/local/bin/aclocal-1.14
/usr/local/bin/autoconf
/usr/local/bin/autoheader
/usr/local/bin/autom4te
/usr/local/bin/automake
/usr/local/bin/automake-1.14
/usr/local/bin/autoreconf
/usr/local/bin/autoscan
/usr/local/bin/autoupdate
/usr/local/bin/cscope
/usr/local/bin/erb
/usr/local/bin/gem
/usr/local/bin/glibtool
/usr/local/bin/glibtoolize
/usr/local/bin/gpg-error
/usr/local/bin/gpg-error-config
/usr/local/bin/ifnames
/usr/local/bin/irb
/usr/local/bin/ksba-config
/usr/local/bin/ocs
/usr/local/bin/pkg-config
/usr/local/bin/rake
/usr/local/bin/rdoc
/usr/local/bin/ri
/usr/local/bin/ruby
/usr/local/bin/testrb
/usr/local/include/gpg-error.h
/usr/local/include/ksba.h
/usr/local/include/libltdl
/usr/local/include/ltdl.h
/usr/local/include/ruby-2.1.0
/usr/local/include/yaml.h
/usr/local/lib/libgpg-error.0.dylib
/usr/local/lib/libgpg-error.dylib
/usr/local/lib/libksba.8.dylib
/usr/local/lib/libksba.dylib
/usr/local/lib/libltdl.7.dylib
/usr/local/lib/libltdl.a
/usr/local/lib/libltdl.dylib
/usr/local/lib/libruby.2.1.0-static.a
/usr/local/lib/libruby.2.1.0.dylib
/usr/local/lib/libruby.2.1.dylib
/usr/local/lib/libruby.dylib
/usr/local/lib/libyaml-0.2.dylib
/usr/local/lib/libyaml.a
/usr/local/lib/libyaml.dylib
/usr/local/lib/pkgconfig/ruby-2.1.pc
/usr/local/lib/pkgconfig/yaml-0.1.pc
/usr/local/lib/ruby/2.1.0
/usr/local/lib/ruby/gems
/usr/local/share/aclocal/README
/usr/local/share/aclocal/argz.m4
/usr/local/share/aclocal/dirlist
/usr/local/share/aclocal/gpg-error.m4
/usr/local/share/aclocal/ksba.m4
/usr/local/share/aclocal/libtool.m4
/usr/local/share/aclocal/ltdl.m4
/usr/local/share/aclocal/ltoptions.m4
/usr/local/share/aclocal/ltsugar.m4
/usr/local/share/aclocal/ltversion.m4
/usr/local/share/aclocal/lt~obsolete.m4
/usr/local/share/aclocal/pkg.m4
/usr/local/share/aclocal-1.14
/usr/local/share/autoconf
/usr/local/share/automake-1.14
/usr/local/share/common-lisp
/usr/local/share/doc/automake
/usr/local/share/doc/pkg-config/pkg-config-guide.html
/usr/local/share/emacs
/usr/local/share/info/gpgrt.info
/usr/local/share/info/ksba.info
/usr/local/share/info/libtool.info
/usr/local/share/info/libtool.info-1
/usr/local/share/info/libtool.info-2
/usr/local/share/libtool
/usr/local/share/man/man1/aclocal-1.14.1
/usr/local/share/man/man1/aclocal.1
/usr/local/share/man/man1/autoconf.1
/usr/local/share/man/man1/autoheader.1
/usr/local/share/man/man1/autom4te.1
/usr/local/share/man/man1/automake-1.14.1
/usr/local/share/man/man1/automake.1
/usr/local/share/man/man1/autoreconf.1
/usr/local/share/man/man1/autoscan.1
/usr/local/share/man/man1/autoupdate.1
/usr/local/share/man/man1/config.guess.1
/usr/local/share/man/man1/config.sub.1
/usr/local/share/man/man1/cscope.1
/usr/local/share/man/man1/erb.1
/usr/local/share/man/man1/glibtool.1
/usr/local/share/man/man1/glibtoolize.1
/usr/local/share/man/man1/gpg-error-config.1
/usr/local/share/man/man1/ifnames.1
/usr/local/share/man/man1/irb.1
/usr/local/share/man/man1/pkg-config.1
/usr/local/share/man/man1/rake.1
/usr/local/share/man/man1/ri.1
/usr/local/share/man/man1/ruby.1
/usr/local/Library/LinkedKegs/autoconf
/usr/local/Library/LinkedKegs/automake
/usr/local/Library/LinkedKegs/cscope
/usr/local/Library/LinkedKegs/libgpg-error
/usr/local/Library/LinkedKegs/libksba
/usr/local/Library/LinkedKegs/libtool
/usr/local/Library/LinkedKegs/libyaml
/usr/local/Library/LinkedKegs/pkg-config
/usr/local/Library/LinkedKegs/ruby
Warning: You seem to have osx-gcc-installer installed.
Homebrew doesn't support osx-gcc-installer. It causes many builds to fail and
is an unlicensed distribution of really old Xcode files.
Please run `xcode-select --install` to install the CLT.
Warning: Some installed formula are missing dependencies.
You should `brew install` the missing dependencies:
brew install openssl
Run `brew missing` for more details.
alby-mbp:folder alby$
As you can also see above, I am missing openssl. This is because I uninstalled it and attempted to reinstall it thinking that this would help, but I was not able to reinstall. Here is what I get when I try to do brew install openssl:
albys-mbp:folder alby$ brew install openssl
Warning: You seem to have osx-gcc-installer installed.
Homebrew doesn't support osx-gcc-installer. It causes many builds to fail and
is an unlicensed distribution of really old Xcode files.
Please run `xcode-select --install` to install the CLT.
Warning: You have an outdated version of /usr/bin/install_name_tool installed.
This will cause binary package installations to fail.
This can happen if you install osx-gcc-installer or RailsInstaller.
To restore it, you must reinstall OS X or restore the binary from
the OS packages.
==> Downloading https://downloads.sf.net/project/machomebrew/Bottles/openssl-1.0.1j_1.mavericks.bottle.tar.gz
Already downloaded: /Library/Caches/Homebrew/openssl-1.0.1j_1.mavericks.bottle.tar.gz
Error: SHA1 mismatch
Expected: 65e125a4777eb6dfb63f01a18f724246123dd79e
Actual: eac5e2d21af64224fc533ebb793b99a2aea434c7
Archive: /Library/Caches/Homebrew/openssl-1.0.1j_1.mavericks.bottle.tar.gz
To retry an incomplete download, remove the file above.
Warning: Bottle installation failed: building from source.
==> Installing openssl dependency: makedepend
==> Downloading https://downloads.sf.net/project/machomebrew/Bottles/makedepend-1.0.5.mavericks.bottle.tar.gz
Already downloaded: /Library/Caches/Homebrew/makedepend-1.0.5.mavericks.bottle.tar.gz
Error: SHA1 mismatch
Expected: 83db1daee01e4eb752c711934eb88850b3ee70d6
Actual: eac5e2d21af64224fc533ebb793b99a2aea434c7
Archive: /Library/Caches/Homebrew/makedepend-1.0.5.mavericks.bottle.tar.gz
To retry an incomplete download, remove the file above.
Warning: Bottle installation failed: building from source.
Error: /usr/local/opt/pkg-config not present or broken
Please reinstall pkg-config. Sorry :(
albys-mbp:folder alby$
Another issue is that when I try and run mysql in bash, I get the following:
albys-mbp:folder alby$ mysql
dyld: Library not loaded: ##HOMEBREW_PREFIX##/opt/openssl/lib/libssl.1.0.0.dylib
Referenced from: /usr/local/bin/mysql
Reason: image not found
Trace/BPT trap: 5
albys-mbp:folder alby$
I am mostly new to programming and am not sure where to begin to solve this issue. I was able to backup my HD to an external HD, but this is after installing the gcc-installer which overwrote my Command Line Tools. So even if I were to do a reinstall, would that even work? I've never had to reinstall my OS X before; would I be able to pick and choose files from the external HD or is it all restored?
Also, I have OS X 10.9.
Thanks!
i have tried installing Apache Axis2/C on Linux but no success.. with libxml2
Here are my efforts
1) libxml2 was installed successfully
Flags : LIBXML2_CFLAGS = -I/usr/local/include/libxml2
LIBXML2_LIBS='-L/usr/local/lib/hpux32 -lxml2 -lz -lpthread -liconv -lm'
AXIS2C_HOME = /tmp
LD_LIBRARY_PATH = {$LD_LIBRARY_PATH}:$AXIS2C_HOME/lib
Ran --prefix=${AXIS2C_HOME} --enable-libxml2=yes
Installation fails with following error:
checking whether to build libxml2 xml parser library... checking pkg-config is at least version 0.9.0... ./configure[21268]: /local/lib/hpux32.
no
yes
checking for LIBXML2... configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables LIBXML2_CFLAGS
and LIBXML2_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
i do not hold pkg-config utility but i have set LIBXML2_CFLAGS and LIBXML2_LIBS, configuration file does not have any information.
can someone please assist here?
Thanks,
Hilesh
I'm attempting to get DBD::MySQL working on Snow Leopard (v10.6.6). The default version of Perl that comes with the OS is v5.10.0. Since I've read that's 64-bit, I went ahead and downloaded and installed a 64-bit version of MySQL (mysql-5.5.8-osx10.6-x86_64).
Installing and setting up MySQL went smoothly, here's my config and version number for reference.
I used CPAN to download DBI and the DBD::MySQL drivers. I then:
Installed DBI
Setup a Makefile.PL
Ran the make command from the command line
The Makefile.PL said it would use the following settings for compiling and testing:
I will use the following settings for compiling and testing:
cflags (mysql_config ) = -I/usr/local/mysql/include -Os -g -fno-common -fno-strict-aliasing -arch x86_64
embedded (mysql_config ) =
libs (mysql_config ) = -L/usr/local/mysql/lib -lmysqlclient -lpthread
mysql_config (guessed ) = mysql_config
nocatchstderr (default ) = 0
nofoundrows (default ) = 0
ssl (guessed ) = 0
testdb (default ) = test
testhost (default ) =
testpassword (User's choice) = r00t!
testsocket (default ) =
testuser (User's choice) = root
To change these settings, see 'perl Makefile.PL --help' and
'perldoc INSTALL'.
Multiple copies of Driver.xst found in: /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI/ /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level/auto/DBI/ at Makefile.PL line 907
Using DBI 1.616 (for perl 5.010000 on darwin-thread-multi-2level) installed in /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI/
Writing Makefile for DBD::mysql
Everything seemed to be going fine, until I tried to run make test :
t/00base....................NOK 2/6# Tried to use 'DBD::mysql'.
# Error: Can't load '/Users/swm/.cpan/build/DBD-mysql-4.018-Pnd2qz/blib/arch/auto/DBD/mysql/mysql.bundle' for module DBD::mysql: dlopen(/Users/swm/.cpan/build/DBD-mysql-4.018-Pnd2qz/blib/arch/auto/DBD/mysql/mysql.bundle, 2): Library not loaded: libmysqlclient.16.dylib
# Referenced from: /Users/swm/.cpan/build/DBD-mysql-4.018-Pnd2qz/blib/arch/auto/DBD/mysql/mysql.bundle
# Reason: image not found at /System/Library/Perl/5.10.0/darwin-thread-multi-2level/DynaLoader.pm line 207.
# at (eval 7) line 2
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
FAILED--Further testing stopped: Unable to load DBD::mysql
make: *** [test_dynamic] Error 9
It's failing because it can't seem to find the mysql.bundle for DBD. Has anyone come across this problem? Or can point me in the right direction on what to try next? I need DBI/DBD::MySQL for my new job and I'm scrambling to find a solution.
Many thanks in advance.
I got around the "Library not loaded: libmysqlclient.16.dylib" problem by placing a symbolic link in /usr/lib/" to /usr/local/mysql-5.5.8-osx10.6-x86_64/lib/libmysqlclient.16.dylib
I worked around the same or a similar issue. Somehow I could build and test DBD::mysql with cpan but when I tried to use it in a script it said things like
dyld: lazy symbol binding failed: Symbol not found: _mysql_init
Referenced from: /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle
Expected in: flat namespace
Apparently, it's a 64-bit vs 32-bit issue.
Installing the fink dbd-mysql-pm5100 package made it work though it took kind of a long time. I also removed the cpan-installed version:
sudo rm -rf /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBD/mysql
sudo rm -rf /Library/Perl/5.10.0/darwin-thread-multi-2level/DBD/mysql
sudo rm -rf /Library/Perl/5.10.0/darwin-thread-multi-2level/DBD/mysql.pm
also include in .profile
export VERSIONER_PERL_PREFER_32_BIT=yes;
Besides creating the link the executions of the program with DBI::mysql generated an error, thus including this variable on the environment make it works
I know this is an old post. But I suppose the best solution would be to add the library directory to the DYLD_FALLBACK_LIBRARY_PATH env variable. (reason here: https://stackoverflow.com/a/3172515/119958 )
There is no ldconfig in mac, so just add the path to this env var and rerun the install process for DBD::mysql
Donato-Vianas-MacBook-Pro:Invoicer donato$ cpanm DBD::mysql
--> Working on DBD::mysql
Fetching http://www.cpan.org/authors/id/C/CA/CAPTTOFU/DBD-mysql-4.022.tar.gz ... OK
Configuring DBD-mysql-4.022 ... OK
Building and testing DBD-mysql-4.022 ... FAIL
! Installing DBD::mysql failed. See /Users/donato/.cpanm/build.log for details.
# Failed test 'use DBD::mysql;'
# at t/00base.t line 21.
# Tried to use 'DBD::mysql'.
# Error: Can't load '/Users/donato/.cpanm/work/1359948144.491/DBD-mysql-4.022/blib/arch/auto/DBD/mysql/mysql.bundle' for module DBD::mysql: dlopen(/Users/donato/.cpanm/work/1359948144.491/DBD-mysql-4.022/blib/arch/auto/DBD/mysql/mysql.bundle, 2): Library not loaded: libmysqlclient.18.dylib
Donato-Vianas-MacBook-Pro:Invoicer donato$ export DYLD_FALLBACK_LIBRARY_PATH=/usr/local/mysql/lib/:$DYLD_FALLBACK_LIBRARY_PATH
Donato-Vianas-MacBook-Pro:Invoicer donato$ cpanm DBD::mysql--> Working on DBD::mysql
Fetching http://www.cpan.org/authors/id/C/CA/CAPTTOFU/DBD-mysql-4.022.tar.gz ... OK
Configuring DBD-mysql-4.022 ... OK
Building and testing DBD-mysql-4.022 ... OK
Successfully installed DBD-mysql-4.022
1 distribution installed
Donato's solution works for install, but the var has to be present at runtime as well or I get the same error. The following fixes this at runtime for shell and _www user:
# For command line use, add following line to ~/.bash_profile:
export DYLD_FALLBACK_LIBRARY_PATH=/usr/local/mysql/lib/:$DYLD_FALLBACK_LIBRARY_PATH
# If Apache needs it, add following line to /etc/apache2/httpd.conf:
# On Lion Server, I put it after <IfDefine MACOSXSERVER>, but shouldn't matter
SetEnv DYLD_FALLBACK_LIBRARY_PATH /usr/local/mysql/lib/:$DYLD_FALLBACK_LIBRARY_PATH
It's somewhat of an aside, but I strongly recommend setting up a separate perl on the machine -- either by fink / macports, or from source -- and leaving the Mac's system perl (and its libraries) alone.
Once I did this on my own Mac, I had very few troubles installing modules thereafter, and I didn't have to worry about accidentally blowing a hole in my OS by breaking the perl that the system uses.
If it were my Mac, I'd install a new perl from source (the Perl source distribution is smart enough to install itself see that it's on a Mac and install itself safely into /usr/local/bin) and the proceed from thee to install DBD::Mysql (and the other modules you require).