RUNNING HANDLER [nova : Restart nova-libvirt container]---Failed - containers

RUNNING HANDLER [nova : Restart nova-libvirt container]...
this failed in deployment part of openstack
These are the commands to deploy openstack that and error comes while i run the deploy command:-
sudo yum install epel-release
sudo yum install python-devel libffi-devel gcc openssl-devel libselinux-python
sudo yum install python-pip
sudo pip install -U pip
sudo yum install ansible
sudo pip install kolla-ansible
sudo pip install kolla-ansible --ignore-install PyYAML
sudo mkdir -p /etc/kola
sudo chown $USER:$USER /etc/kola
cp -r /usr/share/kolla-ansible/etc_examples/kolla/* /etc/kola
cp /usr/share/kolla-ansible/ansible/inventory/* .
kolla-genpwd
cp globals.yml globals.yml.old
kolla-ansible -i ./all-in-one bootstrap-servers
kolla-ansible -i ./all-in-one prechecks
kolla-ansible -i ./all-in-one deploy
kolla-ansible -i ./all-in-one deploy
final command which create all images and deploy openstack
The given below is the error
RUNNING HANDLER [nova : Restart nova-libvirt container] *******************************************************************
fatal: [localhost]: FAILED! => {"msg": "The conditional check 'config_json.changed | bool or nova_libvirt_confs.changed | bool or nova_libvirt_container.changed | bool or ( ceph_conf is not none and ceph_conf.changed | bool ) or ( nova_ceph_keyring is defined and nova_ceph_keyring.changed | bool ) or ( libvirt_secrets_xml is defined and libvirt_secrets_xml.changed | bool ) or ( libvirt_secrets_key is defined and libvirt_secrets_key.changed | bool )' failed. The error was: error while evaluating conditional (config_json.changed | bool or nova_libvirt_confs.changed | bool or nova_libvirt_container.changed | bool or ( ceph_conf is not none and ceph_conf.changed | bool ) or ( nova_ceph_keyring is defined and nova_ceph_keyring.changed | bool ) or ( libvirt_secrets_xml is defined and libvirt_secrets_xml.changed | bool ) or ( libvirt_secrets_key is defined and libvirt_secrets_key.changed | bool )): 'unicode object' has no attribute 'changed'\n\nThe error appears to be in '/usr/share/kolla-ansible/ansible/roles/nova/handlers/main.yml': line 52, column 3, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n\n- name: Restart nova-libvirt container\n ^ here\

Could be a bug related to ansible < 2.8. Have a look at https://bugs.launchpad.net/kolla-ansible/+bug/1835817
So check you are using ansible >= 2.8 at first.
If the error occour after a first installation or upgrading with kolla-ansible upgrade, then try to pull down the container first using the command kolla-ansible pull

Related

Github Action - Can't build gtest using ccache, mingw, cmake and ninja

I am using this workflow: cmake_build.yaml
Here is my toplevel CMakeLists.txt:
cmake_minimum_required(VERSION 3.15)
project(
container
VERSION 0.1.0
DESCRIPTION "An extension to the standard container library in c++"
HOMEPAGE_URL ""
LANGUAGES CXX
)
add_executable(${PROJECT_NAME} src/main.cpp)
set_target_properties(
${PROJECT_NAME}
PROPERTIES
LINKER_LANGUAGE CXX
ARCHIVE_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/lib/${CMAKE_BUILD_TYPE}"
LIBRARY_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/lib/${CMAKE_BUILD_TYPE}"
RUNTIME_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/bin/${CMAKE_BUILD_TYPE}"
)
target_compile_features(${PROJECT_NAME} PUBLIC cxx_std_17)
target_include_directories(
${PROJECT_NAME}
PUBLIC
$<INSTALL_INTERFACE:include>
$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/include>
PRIVATE
${CMAKE_CURRENT_SOURCE_DIR}/src
)
install(
DIRECTORY
include/${PROJECT_NAME_LOWERCASE}
DESTINATION
include
)
enable_testing()
add_subdirectory(test)
and test/CMakeLists.txt
cmake_minimum_required(VERSION 3.14)
project(my_project)
# GoogleTest requires at least C++14
set(CMAKE_CXX_STANDARD 17)
include(FetchContent)
FetchContent_Declare(
googletest
URL https://github.com/google/googletest/archive/03597a01ee50ed33e9dfd640b249b4be3799d395.zip
)
# For Windows: Prevent overriding the parent project's compiler/linker settings
set(gtest_force_shared_crt ON CACHE BOOL "" FORCE)
FetchContent_MakeAvailable(googletest)
add_executable(
hello_test
hello_test.cc
)
target_link_libraries(
hello_test
GTest::gtest_main
)
include(GoogleTest)
gtest_discover_tests(hello_test)
I am using the example from gtest docs:
test/hello_test.cc:
#include <gtest/gtest.h>
TEST(HelloTest, BasicAssertions) {
// Expect two strings not to be equal.
EXPECT_STRNE("hello", "world");
// Expect equality.
EXPECT_EQ(7 * 6, 42);
}
int main(int argc, char **argv)
{
testing::InitGoogleTest(&argc, argv);
return RUN_ALL_TESTS();
}
It builds fine on Windows MSVC, Macos Clang, Linux GCC, but fails using Mingw GCC, here is error shown:
FAILED: test/hello_test.exe test/hello_test[1]_tests.cmake D:/a/tsst/tsst/build/test/hello_test[1]_tests.cmake
cmd.exe /C "cd . && C:\ProgramData\chocolatey\bin\g++.exe -O3 -DNDEBUG test/CMakeFiles/hello_test.dir/hello_test.cc.obj -o test\hello_test.exe -Wl,--out-implib,test\libhello_test.dll.a -Wl,--major-image-version,0,--minor-image-version,0 lib/libgtest_main.a lib/libgtest.a -lkernel32 -luser32 -lgdi32 -lwinspool -lshell32 -lole32 -loleaut32 -luuid -lcomdlg32 -ladvapi32 && cmd.exe /C "cd /D D:\a\tsst\tsst\build\test && D:\a\tsst\tsst\cmake-3.24.3-windows-x86_64\bin\cmake.exe -D TEST_TARGET=hello_test -D TEST_EXECUTABLE=D:/a/tsst/tsst/build/test/hello_test.exe -D TEST_EXECUTOR= -D TEST_WORKING_DIR=D:/a/tsst/tsst/build/test -D TEST_EXTRA_ARGS= -D TEST_PROPERTIES= -D TEST_PREFIX= -D TEST_SUFFIX= -D TEST_FILTER= -D NO_PRETTY_TYPES=FALSE -D NO_PRETTY_VALUES=FALSE -D TEST_LIST=hello_test_TESTS -D CTEST_FILE=D:/a/tsst/tsst/build/test/hello_test[1]_tests.cmake -D TEST_DISCOVERY_TIMEOUT=5 -D TEST_XML_OUTPUT_DIR= -P D:/a/tsst/tsst/cmake-3.24.3-windows-x86_64/share/cmake-3.24/Modules/GoogleTestAddTests.cmake""
CMake Error at D:/a/tsst/tsst/cmake-3.24.3-windows-x86_64/share/cmake-3.24/Modules/GoogleTestAddTests.cmake:112 (message):
Error running test executable.
Path: 'D:/a/tsst/tsst/build/test/hello_test.exe'
Result: Exit code 0xc0000139
Output:
Call Stack (most recent call first):
D:/a/tsst/tsst/cmake-3.24.3-windows-x86_64/share/cmake-3.24/Modules/GoogleTestAddTests.cmake:225 (gtest_discover_tests_impl)
ninja: build stopped: subcommand failed.
Build works fine without building gtest, and it fails when building test executable with gtest

configure and cross compiling samba v4.17.3 has an error

I am cross-compiling samba v4.17.3, i met some questions.
I write auto_config.sh,
root#gyz-thinkcentre-e73:~/third_source/samba-4.17.3# cat auto_config.sh
qemu_binary="qemu-aarch64"
libdir_qemu="/root/niic/SDK/sysroots/aarch64-niic-linux/lib64/"
base_libdir_qemu="/root/niic/SDK/sysroots/aarch64-niic-linux/usr/lib64/"
prefix_path="/root/result/samba"
CROSS_EXEC= "${qemu_binary} -L /root/niic/SDK/sysroots -E LD_LIBRARY_PATH=${libdir_qemu}:${base_libdir_qemu}"
./configure --prefix=${prefix_path} --target=aarch64-niic-linux --host=aarch64-niic-linux samba_cv_CC_NEGATIVE_ENUM_VALUES=yes --cross-exec="${CROSS_EXEC}"
when i run auto_config.sh, a error occured: No such file or directory, but the two path '/root/niic/SDK/sysroots/aarch64-niic-linux/lib64/' and '/root/niic/SDK/sysroots/aarch64-niic-linux/usr/lib64/' are exist.
root#gyz-thinkcentre-e73:~/third_source/samba-4.17.3# ./auto_config.sh
./auto_config.sh: line 7: qemu-aarch64 -L /root/niic/SDK/sysroots -E LD_LIBRARY_PATH=/root/niic/SDK/sysroots/aarch64-niic-linux/lib64/:/root/niic/SDK/sysroots/aarch64-niic-linux/usr/lib64/: No such file or directory
Setting top to : /root/third_source/samba-4.17.3
Setting out to : /root/third_source/samba-4.17.3/bin
Checking for 'gcc' (C compiler) : aarch64-niic-linux-gcc -mcpu=cortex-a55 -fstack-protector-strong -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=/root/niic/SDK/sysroots/aarch64-niic-linux
Checking for program 'git' : /usr/bin/git
Checking for c flags '-MMD' : yes
Checking for program 'gdb' : aarch64-niic-linux-gdb
Checking for header sys/utsname.h : yes
Checking uname sysname type : not found
Checking uname machine type : not found
Checking uname release type : not found
Checking uname version type : not found
Checking for header stdio.h : yes
Checking simple C program : not found
The configuration failed False
(complete log in /root/third_source/samba-4.17.3/bin/config.log)

run realize start for a Go program, outputs exec: not started

when I run realize start for a Go program, I got this error result
[14:55:13][V2-USER-API.YUMMY.ID] : Watching 159 file/s 118 folder/s
[14:55:13][V2-USER-API.YUMMY.ID] : Install started
[14:55:13][V2-USER-API.YUMMY.ID] : Install
exec: not started
I have set up my file .realize.yaml, like this
settings:
legacy:
force: false
interval: 0s
schema:
- name: v2-user-api.yummy.id
path: ./cmd/server
commands:
run:
status: true
watcher:
extensions:
- go
paths:
- ../../
ignored_paths:
- .git
- .realize
- vendor
but I got error after run realize start
This command work for me
#!/usr/bin/env bash
export GO111MODULE=off
cd ~/
go get github.com/oxequa/realize
cd /go/src/github.com/oxequa/realize && \
git fetch && \
git checkout v2.0.2 && \
go get github.com/oxequa/realize
RV=$(realize --version)
echo "Realize installed #: $RV"
export GO111MODULE=on
use realize version v2.0.2

Mysql will not install due to mariadb install but mariadb is not installed

Been trying for hours to get mysql installed but it failed due to a conflict.
This is a brand newly installed CentOS 8 x64 (latest) and it's fully updated. There are no custom packages installed this is a minimal install.
This is on a relatively powerful dedicated server with nothing else on it.
I first ran into the issue trying to install CentOS Web Panel. That is the only thing I've done on this server after install and update. The failure of centos web panel was simply the same conflict I'm running into with mysql. Mysql failed because it says mariadb is installed. But even when I removed mariadb still it gave the same issue.
Same issue happens when I try to install mysql directly which is what this question is about. I am able to install mariadb with no problem though and even remove it as well. But still after installing and removing mariadb mysql still refuses due to nonexistent conflict.
# rpm -q centos-release
centos-release-8.0-0.1905.0.9.el8..x86_64
# yum update -y
Last metadata expiration check: 0:14:30 ago on Sat 23 Nov 2019 02:12:39 PM EST.
Dependencies resolved.
Nothing to do.
Complete!
Here is what happens when I try to install
# yum install mysql -y
CentOS Web Panel repo for Linux 7 - .x86_64 10 kB/s | 2.9 kB 00:00
CentOS-8 - AppStream3.1 kB/s | 4.3 kB 00:01
CentOS-8 - Base 2.9 kB/s | 3.9 kB 00:01
CentOS-8 - Extras 4.3 kB/s | 1.5 kB 00:00
Extra Packages for Enterprise Linux 8 - .x86_64 15 kB/s | 19 kB 00:01
MariaDB 2.6 kB/s | 2.9 kB 00:01
Dependencies resolved.
================================================================================
Package ArchVersion Repository Size
================================================================================
Installing:
mysql .x86_64 8.0.17-3.module_el8.0.0+181+899d6349 AppStream 11 M
Installing dependencies:
mysql-common.x86_64 8.0.17-3.module_el8.0.0+181+899d6349 AppStream 143 k
MariaDB-common .x86_64 10.1.43-1.el7.centos mariadb 68 k
Transaction Summary
================================================================================
Install 3 Packages
Total download size: 11 M
Installed size: 68 M
Downloading Packages:
(1/3): mysql-common-8.0.17-3.module_el8.0.0+181 1.3 MB/s | 143 kB 00:00
(2/3): MariaDB-common-10.1.43-1.el7.centos.x86_ 233 kB/s | 68 kB 00:00
(3/3): mysql-8.0.17-3.module_el8.0.0+181+899d63 9.8 MB/s | 11 MB 00:01
--------------------------------------------------------------------------------
Total 7.6 MB/s | 11 MB 00:01
Running transaction check
Transaction check succeeded.
Running transaction test
The downloaded packages were saved in cache until the next successful transaction.
You can remove cached packages by executing 'dnf clean packages'.
Error: Transaction check error:
file /usr/share/mysql/charsets/Index.xml conflicts between attempted installs of mysql-common-8.0.17-3.module_el8.0.0+181+899d6349..x86_64 and MariaDB-common-10.1.43-1.el7.centos..x86_64
file /usr/share/mysql/charsets/armscii8.xml ... (same)
file /usr/share/mysql/charsets/ascii.xml ...
file /usr/share/mysql/charsets/cp1250.xml ...
file /usr/share/mysql/charsets/cp1251.xml ...
file /usr/share/mysql/charsets/cp1256.xml ...
file /usr/share/mysql/charsets/cp1257.xml ...
file /usr/share/mysql/charsets/cp850.xml ...
file /usr/share/mysql/charsets/cp852.xml ...
file /usr/share/mysql/charsets/cp866.xml ...
file /usr/share/mysql/charsets/dec8.xml ...
file /usr/share/mysql/charsets/geostd8.xml ...
file /usr/share/mysql/charsets/greek.xml ...
file /usr/share/mysql/charsets/hebrew.xml ...
file /usr/share/mysql/charsets/hp8.xml ...
file /usr/share/mysql/charsets/keybcs2.xml ...
file /usr/share/mysql/charsets/koi8r.xml ...
file /usr/share/mysql/charsets/koi8u.xml ...
file /usr/share/mysql/charsets/latin1.xml ...
file /usr/share/mysql/charsets/latin2.xml ...
file /usr/share/mysql/charsets/latin5.xml ...
file /usr/share/mysql/charsets/latin7.xml ...
file /usr/share/mysql/charsets/macce.xml ...
file /usr/share/mysql/charsets/macroman.xml ...
file /usr/share/mysql/charsets/swe7.xml ...
Error Summary
-------------
Problem is that mariadb is not installed. I uninstalled it. Even tried rebooting server to no avail. yum package list does not show either mysql or mariadb to be installed.
# yum remove -y mariadb
No match for argument: mariadb
No packages marked for removal.
Dependencies resolved.
Nothing to do.
Complete!
# rpm -e mariadb
error: package mariadb is not installed
# rpm -V mariadb
package mariadb is not installed
# yum remove mysql -y
No match for argument: mysql
No packages marked for removal.
Dependencies resolved.
Nothing to do.
Complete!
# yum remove mysql-common
No match for argument: mysql-common
No packages marked for removal.
Dependencies resolved.
Nothing to do.
Complete!
# package-cleanup --cleandupes
Last metadata expiration check: 0:07:50 ago on Sat 23 Nov 2019 02:12:39 PM EST.
Error: No duplicated packages found for removal.
# dnf clean packages
0 files removed
# yum list installed | grep mariadb
#
# yum list installed | grep mysql
#
as you see there's nothing there. Even rebooted. Tried installing again same error as above.
Here is my full package list:
~# yum list installed
Installed Packages
NetworkManager..x86_64
NetworkManager-libnm..x86_64
NetworkManager-team..x86_64
NetworkManager-tui..x86_64
PackageKit..x86_64
PackageKit-glib..x86_64
acl..x86_64
adcli..x86_64
apr..x86_64
apr-util..x86_64
at..x86_64
attr..x86_64
audit..x86_64
audit-libs..x86_64
authselect..x86_64
authselect-compat..x86_64
authselect-libs..x86_64
avahi-libs..x86_64
basesystem.noarch11-5.el8
bash..x86_64
bash-completion.noarch 1:2.7-5.el8
bc..x86_64
bind-export-libs..x86_64
bind-libs..x86_64
bind-libs-lite..x86_64
bind-license.noarch 32:9.11.4-17.P2.el8_0.1 #AppStream
bind-utils..x86_64
binutils..x86_64
biosdevname..x86_64
blktrace..x86_64
bpftool..x86_64
brotli..x86_64
bzip2..x86_64
bzip2-libs..x86_64
c-ares..x86_64
ca-certificates.noarch 2018.2.24-6.el8
cairo..x86_64
cairo-gobject..x86_64
centos-logos..x86_64
centos-release..x86_64
checkpolicy..x86_64
chkconfig..x86_64
chrony..x86_64
cockpit..x86_64
cockpit-bridge..x86_64
cockpit-packagekit.noarch184.1-1.el8
cockpit-system.noarch185.1-1.el8_0
cockpit-ws..x86_64
compat-openssl10..x86_64
coreutils..x86_64
coreutils-common..x86_64
cpio..x86_64
cracklib..x86_64
cracklib-dicts..x86_64
cronie..x86_64
cronie-anacron..x86_64
crontabs.noarc
crypto-policies.noarch
cryptsetup..x86_64
cryptsetup-libs..x86_64
cups-libs..x86_64
curl..x86_64
cwp-httpd..x86_64
cwp-suphp..x86_64
cyrus-sasl-gssapi..x86_64
cyrus-sasl-lib..x86_64
cyrus-sasl-plain..x86_64
dbus..x86_64
dbus-common.noarch 1:1.12.8-7.el8
dbus-daemon..x86_64
dbus-glib..x86_64
dbus-libs..x86_64
dbus-tools..x86_64
dejavu-fonts-common.noarch 2.35-6.el8
dejavu-sans-fonts.noarch 2.35-6.el8
desktop-file-utils..x86_64
device-mapper..x86_64
device-mapper-event..x86_64
device-mapper-event-libs..x86_64
device-mapper-libs..x86_64
device-mapper-persistent-data..x86_64
dhcp-client..x86_64
dhcp-common.noarch 12:4.3.6-30.el8
dhcp-libs..x86_64
diffutils..x86_64
dmidecode..x86_64
dnf.noarch
dnf-data.noarch
dnf-plugin-spacewalk.noarch
dnf-plugins-core.noarch
dnf-utils.noarch
dos2unix..x86_64
dosfstools..x86_64
dracut..x86_64
dracut-config-rescue..x86_64
dracut-network..x86_64
dracut-squash..x86_64
dwz..x86_64
e2fsprogs..x86_64
e2fsprogs-libs..x86_64
ed..x86_64
efi-srpm-macros.noarch 3-2.el8
elfutils-default-yama-scope.noarch 0.174-6.el8
elfutils-libelf..x86_64
elfutils-libs..x86_64
emacs-filesystem.noarch 1:26.1-5.el8
epel-release.noarch 8-7.el8 #epel
ethtool..x86_64
expat..x86_64
file..x86_64
file-libs..x86_64
filesystem..x86_64
findutils..x86_64
fipscheck..x86_64
fipscheck-lib..x86_64
firewalld.noarch
firewalld-filesystem.noarch
fontconfig..x86_64
fontpackages-filesystem.noarch
fprintd..x86_64
fprintd-pam..x86_64
freetype..x86_64
fuse-libs..x86_64
gawk..x86_64
gdbm..x86_64
gdbm-libs..x86_64
gdk-pixbuf2..x86_64
geolite2-city.noarch 20180605-1.el8
geolite2-country.noarch 20180605-1.el8
gettext..x86_64
gettext-libs..x86_64
ghc-srpm-macros.noarch 1.4.2-7.el8
glib-networking..x86_64
glib2..x86_64
glibc..x86_64
glibc-common..x86_64
glibc-langpack-en..x86_64
gmp..x86_64
gnupg2..x86_64
gnupg2-smime..x86_64
gnutls..x86_64
go-srpm-macros.noarch2-16.el8
gobject-introspection..x86_64
gpgme..x86_64
gpm-libs..x86_64
grep..x86_64
groff-base..x86_64
grub2-common.noarch
grub2-pc..x86_64
grub2-pc-modules.noarch
grub2-tools..x86_64
grub2-tools-efi..x86_64
grub2-tools-extra..x86_64
grub2-tools-minimal..x86_64
grubby..x86_64
gsettings-desktop-schemas..x86_64
gzip..x86_64
hardlink..x86_64
hdparm..x86_64
hostname..x86_64
hwdata.noarch0.314-8.0.el8
ima-evm-utils..x86_64
info..x86_64
initscripts..x86_64
insights-client.noarch 3.0.5-4.el8
ipcalc..x86_64
iproute..x86_64
iprutils..x86_64
ipset..x86_64
ipset-libs..x86_64
iptables..x86_64
iptables-ebtables..x86_64
iptables-libs..x86_64
iptstate..x86_64
iputils..x86_64
irqbalance..x86_64
iwl100-firmware.noarch
iwl1000-firmware.noarch
iwl105-firmware.noarch
iwl135-firmware.noarch
iwl2000-firmware.noarch 18.168.6.1-92.el8.1 #anaconda
iwl2030-firmware.noarch 18.168.6.1-92.el8.1 #anaconda
iwl3160-firmware.noarch 1:25.30.13.0-92.el8.1#anaconda
iwl3945-firmware.noarch 15.32.2.9-92.el8.1 #anaconda
iwl4965-firmware.noarch 228.61.2.24-92.el8.1 #anaconda
iwl5000-firmware.noarch 8.83.5.1_1-92.el8.1 #anaconda
iwl5150-firmware.noarch 8.24.2.2-92.el8.1
iwl6000-firmware.noarch 9.221.4.1-92.el8.1 #anaconda
iwl6000g2a-firmware.noarch 18.168.6.1-92.el8.1 #anaconda
iwl6050-firmware.noarch 41.28.5.1-92.el8.1 #anaconda
iwl7260-firmware.noarch 1:25.30.13.0-92.el8.1#anaconda
jansson..x86_64
json-c..x86_64
json-glib..x86_64
kbd..x86_64
kbd-legacy.noarch2.0.4-8.el8
kbd-misc.noarch 2.0.4-8.el8
kernel..x86_64
kernel..x86_64
kernel-core..x86_64
kernel-core..x86_64
kernel-modules..x86_64
kernel-modules..x86_64
kernel-tools..x86_64
kernel-tools-libs..x86_64
kexec-tools..x86_64
keyutils-libs..x86_64
kmod..x86_64
kmod-kvdo..x86_64
kmod-libs..x86_64
kpartx..x86_64
kpatch.noarch0.6.1-1.el8
krb5-libs..x86_64
langpacks-en.noarch 1.0-12.el8
ledmon..x86_64
less..x86_64
libX11..x86_64
libX11-common.noarch 1.6.7-1.el8
libXau..x86_64
libXext..x86_64
libXrender..x86_64
libacl..x86_64
libaio..x86_64
libappstream-glib..x86_64
libarchive..x86_64
libassuan..x86_64
libattr..x86_64
libbasicobjects..x86_64
libblkid..x86_64
libcap..x86_64
libcap-ng..x86_64
libcollection..x86_64
libcom_err..x86_64
libcomps..x86_64
libconfig..x86_64
libcroco..x86_64
libcurl..x86_64
libdaemon..x86_64
libdb..x86_64
libdb-utils..x86_64
libdhash..x86_64
libdnf..x86_64
libedit..x86_64
libestr..x86_64
libevent..x86_64
libfastjson..x86_64
libfdisk..x86_64
libffi..x86_64
libfprint..x86_64
libgcc..x86_64
libgcrypt..x86_64
libgomp..x86_64
libgpg-error..x86_64
libgudev..x86_64
libidn2..x86_64
libini_config..x86_64
libipa_hbac..x86_64
libkcapi..x86_64
libkcapi-hmaccalc..x86_64
libksba..x86_64
libldb..x86_64
libmaxminddb..x86_64
libmetalink..x86_64
libmnl..x86_64
libmodman..x86_64
libmodulemd1..x86_64
libmount..x86_64
libndp..x86_64
libnetfilter_conntrack..x86_64
libnfnetlink..x86_64
libnfsidmap..x86_64
libnftnl..x86_64
libnghttp2..x86_64
libnl3..x86_64
libnl3-cli..x86_64
libnsl2..x86_64
libpath_utils..x86_64
libpcap..x86_64
libpipeline..x86_64
libpkgconf..x86_64
libpng..x86_64
libpq..x86_64
libproxy..x86_64
libpsl..x86_64
libpwquality..x86_64
libref_array..x86_64
librelp..x86_64
librepo..x86_64
libreport-filesystem..x86_64
libseccomp..x86_64
libsecret..x86_64
libselinux..x86_64
libselinux-utils..x86_64
libsemanage..x86_64
libsepol..x86_64
libsigsegv..x86_64
libsmartcols..x86_64
libsmbclient..x86_64
libsolv..x86_64
libsoup..x86_64
libss..x86_64
libssh..x86_64
libsss_autofs..x86_64
libsss_certmap..x86_64
libsss_idmap..x86_64
libsss_nss_idmap..x86_64
libsss_sudo..x86_64
libstdc++..x86_64
libstemmer..x86_64
libstoragemgmt..x86_64
libsysfs..x86_64
libtalloc..x86_64
libtasn1..x86_64
libtdb..x86_64
libteam..x86_64
libtevent..x86_64
libtirpc..x86_64
libunistring..x86_64
libusbx..x86_64
libuser..x86_64
libutempter..x86_64
libuuid..x86_64
libverto..x86_64
libwbclient..x86_64
libxcb..x86_64
libxcrypt..x86_64
libxkbcommon..x86_64
libxml2..x86_64
libyaml..x86_64
linux-firmware.noarch20190111-92.gitd9fb2ee6.el8 #anaconda
logrotate..x86_64
lshw..x86_64
lsof..x86_64
lsscsi..x86_64
lua-libs..x86_64
lvm2..x86_64
lvm2-libs..x86_64
lz4-libs..x86_64
lzo..x86_64
mailcap.noarch 2.1.48-3.el8
make..x86_64
man-db..x86_64
man-pages..x86_64
mcelog..x86_64
mdadm..x86_64
microcode_ctl..x86_64
mlocate..x86_64
mozjs52..x86_64
mpfr..x86_64
mtr..x86_64
nano..x86_64
ncurses..x86_64
ncurses-base.noarch 6.1-7.20180224.el8 #anaconda
ncurses-libs..x86_64
net-tools..x86_64
nettle..x86_64
newt..x86_64
nftables..x86_64
nmap-ncat..x86_64
npth..x86_64
nspr..x86_64
nss..x86_64
nss-softokn..x86_64
nss-softokn-freebl..x86_64
nss-sysinit..x86_64
nss-util..x86_64
numactl-libs..x86_64
ocaml-srpm-macros.noarch 5-4.el8
openblas-srpm-macros.noarch 2-2.el8
openldap..x86_64
openssh..x86_64
openssh-clients..x86_64
openssh-server..x86_64
openssl..x86_64
openssl-libs..x86_64
openssl-pkcs11..x86_64
os-prober..x86_64
p11-kit..x86_64
p11-kit-trust..x86_64
p7zip..x86_64
p7zip-plugins..x86_64
pam..x86_64
parted..x86_64
passwd..x86_64
pciutils..x86_64
pciutils-libs..x86_64
pcre..x86_64
pcre2..x86_64
perl..x86_64
perl-Algorithm-Diff.noarch 1.1903-9.el8
perl-Archive-Tar.noarch 2.30-1.el8
perl-Archive-Zip.noarch 1.60-3.el8
perl-Attribute-Handlers.noarch 0.99-416.el8
perl-B-Debug.noarch 1.26-2.el8
perl-CPAN.noarch 2.18-397.el8
perl-CPAN-Meta.noarch2.150010-396.el8
perl-CPAN-Meta-Requirements.noarch 2.140-396.el8
perl-CPAN-Meta-YAML.noarch 0.018-397.el8
perl-Carp.noarch 1.42-396.el8
perl-Compress-Bzip2..x86_64
perl-Compress-Raw-Bzip2..x86_64
perl-Compress-Raw-Zlib..x86_64
perl-Config-Perl-V.noarch0.30-1.el8
perl-DB_File..x86_64
perl-Data-Dumper..x86_64
perl-Data-OptList.noarch 0.110-6.el8
perl-Data-Section.noarch 0.200007-3.el8
perl-Devel-PPPort..x86_64
perl-Devel-Peek..x86_64
perl-Devel-SelfStubber.noarch1.06-416.el8
perl-Devel-Size..x86_64
perl-Digest.noarch 1.17-395.el8
perl-Digest-MD5..x86_64
perl-Digest-SHA..x86_64
perl-Encode..x86_64
perl-Encode-Locale.noarch1.05-9.el8
perl-Encode-devel..x86_64
perl-Env.noarch 1.04-395.el8
perl-Errno..x86_64
perl-Exporter.noarch 5.72-396.el8
perl-ExtUtils-CBuilder.noarch1:0.280230-2.el8
perl-ExtUtils-Command.noarch 1:7.34-1.el8
perl-ExtUtils-Embed.noarch 1.34-416.el8
perl-ExtUtils-Install.noarch 2.14-4.el8
perl-ExtUtils-MM-Utils.noarch1:7.34-1.el8
perl-ExtUtils-MakeMaker.noarch 1:7.34-1.el8
perl-ExtUtils-Manifest.noarch1.70-395.el8
perl-ExtUtils-Miniperl.noarch1.06-416.el8
perl-ExtUtils-ParseXS.noarch 1:3.35-2.el8
perl-File-Fetch.noarch 0.56-2.el8
perl-File-HomeDir.noarch 1.002-4.el8
perl-File-Path.noarch2.15-2.el8
perl-File-Temp.noarch0.230.600-1.el8
perl-File-Which.noarch 1.22-2.el8
perl-Filter..x86_64
perl-Filter-Simple.noarch0.94-2.el8
perl-Getopt-Long.noarch 1:2.50-4.el8
perl-HTTP-Tiny.noarch0.074-1.el8
perl-IO..x86_64
perl-IO-Compress.noarch 2.081-1.el8
perl-IO-Socket-IP.noarch 0.39-5.el8
perl-IO-Socket-SSL.noarch2.060-2.el8
perl-IO-Zlib.noarch 1:1.10-416.el8
perl-IPC-Cmd.noarch 2:1.02-1.el8
perl-IPC-SysV..x86_64
perl-IPC-System-Simple.noarch1.25-17.el8
perl-JSON-PP.noarch 1:2.97.001-3.el8
perl-Locale-Codes.noarch 3.57-1.el8
perl-Locale-Maketext.noarch 1.28-396.el8
perl-Locale-Maketext-Simple.noarch 1:0.21-416.el8
perl-MIME-Base64..x86_64
perl-MRO-Compat.noarch 0.13-4.el8
perl-Math-BigInt.noarch 1:1.9998.11-5.el8
perl-Math-BigInt-FastCalc..x86_64
perl-Math-BigRat.noarch 0.2614-1.el8
perl-Math-Complex.noarch 1.59-416.el8
perl-Memoize.noarch 1.03-416.el8
perl-Module-Build.noarch 2:0.42.24-5.el8
perl-Module-CoreList.noarch 1:5.20181130-1.el8
perl-Module-CoreList-tools.noarch1:5.20181130-1.el8
perl-Module-Load.noarch 1:0.32-395.el8
perl-Module-Load-Conditional.noarch 0.68-395.el8
perl-Module-Loaded.noarch1:0.08-416.el8
perl-Module-Metadata.noarch 1.000033-395.el8
perl-Mozilla-CA.noarch 20160104-7.el8
perl-Net-Ping.noarch 2.55-416.el8
perl-Net-SSLeay..x86_64
perl-Package-Generator.noarch1.106-11.el8
perl-Params-Check.noarch 1:0.38-395.el8
perl-Params-Util..x86_64
perl-PathTools..x86_64
perl-Perl-OSType.noarch 1.010-396.el8
perl-PerlIO-via-QuotedPrint.noarch 0.08-395.el8
perl-Pod-Checker.noarch 4:1.73-395.el8
perl-Pod-Escapes.noarch 1:1.07-395.el8
perl-Pod-Html.noarch 1.22.02-416.el8
perl-Pod-Parser.noarch 1.63-396.el8
perl-Pod-Perldoc.noarch 3.28-396.el8
perl-Pod-Simple.noarch 1:3.35-395.el8
perl-Pod-Usage.noarch4:1.69-395.el8
perl-Scalar-List-Utils..x86_64
perl-SelfLoader.noarch 1.23-416.el8
perl-Socket..x86_64
perl-Software-License.noarch 0.103013-2.el8
perl-Storable..x86_64
perl-Sub-Exporter.noarch 0.987-15.el8
perl-Sub-Install.noarch 0.928-14.el8
perl-Sys-Syslog..x86_64
perl-Term-ANSIColor.noarch 4.06-396.el8
perl-Term-Cap.noarch 1.17-395.el8
perl-TermReadKey..x86_64
perl-Test.noarch 1.30-416.el8
perl-Test-Harness.noarch 1:3.42-1.el8
perl-Test-Simple.noarch 1:1.302135-1.el8
perl-Text-Balanced.noarch2.03-395.el8
perl-Text-Diff.noarch1.45-2.el8
perl-Text-Glob.noarch0.11-4.el8
perl-Text-ParseWords.noarch 3.30-395.el8
perl-Text-Tabs+Wrap.noarch 2013.0523-395.el8
perl-Text-Template.noarch1.51-1.el8
perl-Thread-Queue.noarch 3.13-1.el8
perl-Time-HiRes..x86_64
perl-Time-Local.noarch 1:1.280-1.el8
perl-Time-Piece..x86_64
perl-URI.noarch 1.73-3.el8
perl-Unicode-Collate..x86_64
perl-Unicode-Normalize..x86_64
perl-autodie.noarch 2.29-396.el8
perl-bignum.noarch 0.49-2.el8
perl-constant.noarch 1.33-396.el8
perl-devel..x86_64
perl-encoding..x86_64
perl-experimental.noarch 0.019-2.el8
perl-inc-latest.noarch 2:0.500-9.el8
perl-interpreter..x86_64
perl-libnet.noarch 3.11-3.el8
perl-libnetcfg.noarch4:5.26.3-416.el8
perl-libs..x86_64
perl-local-lib.noarch2.000024-2.el8
perl-macros..x86_64
perl-open.noarch 1.11-416.el8
perl-parent.noarch 1:0.237-1.el8
perl-perlfaq.noarch 5.20180605-1.el8
perl-podlators.noarch4.11-1.el8
perl-srpm-macros.noarch 1-25.el8
perl-threads..x86_64
perl-threads-shared..x86_64
perl-utils.noarch5.26.3-416.el8
perl-version..x86_64
pigz..x86_64
pinentry..x86_64
pinfo..x86_64
pixman..x86_64
pkgconf..x86_64
pkgconf-m4.noarch1.4.2-1.el8
pkgconf-pkg-config..x86_64
platform-python..x86_64
platform-python-pip.noarch 9.0.3-13.el8
platform-python-setuptools.noarch39.2.0-4.el8
plymouth..x86_64
plymouth-core-libs..x86_64
plymouth-scripts..x86_64
policycoreutils..x86_64
policycoreutils-python-utils.noarch 2.8-16.1.el8
polkit..x86_64
polkit-libs..x86_64
polkit-pkla-compat..x86_64
popt..x86_64
prefixdevname..x86_64
procps-ng..x86_64
psacct..x86_64
publicsuffix-list-dafsa.noarch 20180723-1.el8
python-srpm-macros.noarch3-37.el8
python3-asn1crypto.noarch0.24.0-3.el8
python3-audit..x86_64
python3-bind.noarch 32:9.11.4-17.P2.el8_0.1 #AppStream
python3-cairo..x86_64
python3-cffi..x86_64
python3-chardet.noarch 3.0.4-7.el8
python3-configobj.noarch 5.0.6-11.el8
python3-cryptography..x86_64
python3-dateutil.noarch 1:2.6.1-6.el8
python3-dbus..x86_64
python3-decorator.noarch 4.2.1-2.el8
python3-dmidecode..x86_64
python3-dnf.noarch 4.0.9.2-5.el8
python3-dnf-plugin-spacewalk.noarch 2.8.5-11.module_el8.0.0+180+337688dc
python3-dnf-plugins-core.noarch 4.0.2.2-3.el8
python3-firewall.noarch 0.6.3-7.el8
python3-gobject..x86_64
python3-gobject-base..x86_64
python3-gpg..x86_64
python3-hawkey..x86_64
python3-hwdata.noarch2.3.6-3.el8
python3-idna.noarch 2.5-5.el8
python3-iniparse.noarch 0.4-31.el8
python3-libcomps..x86_64
python3-libdnf..x86_64
python3-librepo..x86_64
python3-libs..x86_64
python3-libselinux..x86_64
python3-libsemanage..x86_64
python3-libstoragemgmt.noarch1.6.2-9.el8
python3-libstoragemgmt-clibs..x86_64
python3-libxml2..x86_64
python3-linux-procfs.noarch 0.6-6.el8
python3-magic.noarch 5.33-8.el8
python3-netifaces..x86_64
python3-newt..x86_64
python3-perf..x86_64
python3-ply.noarch 3.9-7.el8
python3-policycoreutils.noarch 2.8-16.1.el8
python3-pyOpenSSL.noarch 18.0.0-1.el8
python3-pycparser.noarch 2.14-14.el8
python3-pyparsing.noarch 2.1.10-7.el8
python3-pysocks.noarch 1.6.8-3.el8
python3-pyudev.noarch0.21.0-7.el8
python3-pyyaml..x86_64
python3-requests.noarch 2.20.0-1.el8
python3-rhn-client-tools..x86_64
python3-rhnlib.noarch2.8.6-8.module_el8.0.0+180+337688dc
python3-rpm..x86_64
python3-rpm-macros.noarch3-37.el8
python3-schedutils..x86_64
python3-setools..x86_64
python3-six.noarch 1.11.0-8.el8
python3-slip.noarch 0.6.4-11.el8
python3-slip-dbus.noarch 0.6.4-11.el8
python3-sssdconfig.noarch2.0.0-43.el8_0.3
python3-syspurpose..x86_64
python3-systemd..x86_64
python3-unbound..x86_64
python3-urllib3.noarch 1.23-5.el8
qt5-srpm-macros.noarch 5.11.1-2.el8
quota..x86_64
quota-nls.noarch 1:4.04-10.el8
readline..x86_64
realmd..x86_64
redhat-rpm-config.noarch 116-1.el8.0.1
rhn-client-tools..x86_64
rng-tools..x86_64
rootfiles.noarch 8.1-22.el8
rpm..x86_64
rpm-build-libs..x86_64
rpm-libs..x86_64
rpm-plugin-selinux..x86_64
rpm-plugin-systemd-inhibit..x86_64
rsync..x86_64
rsyslog..x86_64
rsyslog-gnutls..x86_64
rsyslog-gssapi..x86_64
rsyslog-relp..x86_64
rust-srpm-macros.noarch 5-2.el8
samba-client-libs..x86_64
samba-common.noarch 4.9.1-8.el8
samba-common-libs..x86_64
screen..x86_64
sed..x86_64
selinux-policy.noarch3.14.1-61.el8_0.2
selinux-policy-targeted.noarch 3.14.1-61.el8_0.2
setroubleshoot-plugins.noarch3.3.10-1.el8
setroubleshoot-server..x86_64
setup.noarch 2.12.2-2.el8
sg3_utils..x86_64
sg3_utils-libs..x86_64
shadow-utils..x86_64
shared-mime-info..x86_64
slang..x86_64
smartmontools..x86_64
snappy..x86_64
sos.noarch 3.6-10.el8_0.3
sqlite..x86_64
sqlite-libs..x86_64
squashfs-tools..x86_64
sscg..x86_64
sssd..x86_64
sssd-ad..x86_64
sssd-client..x86_64
sssd-common..x86_64
sssd-common-pac..x86_64
sssd-ipa..x86_64
sssd-kcm..x86_64
sssd-krb5..x86_64
sssd-krb5-common..x86_64
sssd-ldap..x86_64
sssd-nfs-idmap..x86_64
sssd-proxy..x86_64
strace..x86_64
sudo..x86_64
symlinks..x86_64
systemd..x86_64
systemd-libs..x86_64
systemd-pam..x86_64
systemd-udev..x86_64
systemtap-sdt-devel..x86_64
tar..x86_64
tcpdump..x86_64
teamd..x86_64
time..x86_64
timedatex..x86_64
tree..x86_64
trousers..x86_64
trousers-lib..x86_64
tuned.noarch 2.10.0-15.el8
tzdata.noarch2019a-1.el8
unbound-libs..x86_64
unzip..x86_64
usbutils..x86_64
util-linux..x86_64
util-linux-user..x86_64
vdo..x86_64
vim-common..x86_64
vim-enhanced..x86_64
vim-filesystem.noarch2:8.0.1763-10.el8
vim-minimal..x86_64
virt-what..x86_64
wget..x86_64
which..x86_64
words.noarch 3.0-28.el8
xdg-utils.noarch 1.1.2-5.el8
xfsdump..x86_64
xfsprogs..x86_64
xkeyboard-config.noarch 2.24-3.el8
xz..x86_64
xz-libs..x86_64
yum.noarch 4.0.9.2-5.el8
zip..x86_64
zlib..x86_64
Additionally mariadb-libs is NOT installed.
# yum remove mariadb-libs -y
No match for argument: mariadb-libs
No packages marked for removal.
Dependencies resolved.
Nothing to do.
Complete!
So removing maria-libs is not the solution unlike another question which proposes that.
Also tried to remove any extraneous files/folders.
rm -f /var/log/mariadb
rm -f /var/log/mariadb/mariadb.log.rpmsave
rm -rf /var/lib/mysql
rm -rf /usr/lib64/mysql
rm -rf /usr/share/mysql
No luck. Same error like it exists even though it does not exist and it is not installed.
Last attempt: trying to install with mariadb reinstalled also fails
Lastly, I tried one more thing, which is to, after doing all this, then trying to install mariadb and then try installing mysql,
~# yum install mariadb -y
Last metadata expiration check: 0:02:02 ago on Sat 23 Nov 2019 02:51:37 PM EST.
Dependencies resolved.
...
Installed:
mariadb-3:10.3.11-2.module_el8.0.0+35+6f2527ed.x86_64
mariadb-common-3:10.3.11-2.module_el8.0.0+35+6f2527ed.x86_64
mariadb-connector-c-3.0.7-1.el8.x86_64
MariaDB-common-10.1.43-1.el7.centos.x86_64
Complete!
And mariadb installs fine, but mysql still doesn't install. It gives a different error, but this is because mariadb is installed in this case. If I remove mariadb again, it gives the original error again like above.
# yum install mysql -y
Last metadata expiration check: 0:02:18 ago on Sat 23 Nov 2019 02:51:37 PM EST.
Error:
Problem: problem with installed package mariadb-3:10.3.11-2.module_el8.0.0+35+6f2527ed.x86_64
- package mariadb-3:10.3.11-2.module_el8.0.0+35+6f2527ed.x86_64 conflicts with mysql provided by mysql-8.0.17-3.module_el8.0.0+181+899d6349.x86_64
- package mysql-8.0.17-3.module_el8.0.0+181+899d6349.x86_64 conflicts with mariadb provided by mariadb-3:10.3.11-2.module_el8.0.0+35+6f2527ed.x86_64
- conflicting requests
- package MariaDB-client-10.1.40-1.el7.centos.x86_64 is excluded
- package MariaDB-client-10.1.41-1.el7.centos.x86_64 is excluded
- package MariaDB-client-10.1.43-1.el7.centos.x86_64 is excluded
(try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
#
I also tried the --nobest flag but that does nothing, and I tried the --skip-broken flag but then it installs nothing either since it thinks it's broken.
I also tried installing mysql-server but no luck on that either.
# yum install mysql-server
Last metadata expiration check: 0:04:49 ago on Sat 23 Nov 2019 02:51:37 PM EST.
Error:
Problem: problem with installed package mariadb-3:10.3.11-2.module_el8.0.0+35+6f2527ed.x86_64
- package mariadb-3:10.3.11-2.module_el8.0.0+35+6f2527ed.x86_64 conflicts with mysql provided by mysql-8.0.17-3.module_el8.0.0+181+899d6349.x86_64
- package mysql-8.0.17-3.module_el8.0.0+181+899d6349.x86_64 conflicts with mariadb provided by mariadb-3:10.3.11-2.module_el8.0.0+35+6f2527ed.x86_64
- package mysql-server-8.0.17-3.module_el8.0.0+181+899d6349.x86_64 requires mysql(x86-64), but none of the providers can be installed
- conflicting requests
- package mysql-8.0.13-1.module_el8.0.0+41+ca30bab6.x86_64 is excluded
- package MariaDB-client-10.1.40-1.el7.centos.x86_64 is excluded
- package MariaDB-client-10.1.41-1.el7.centos.x86_64 is excluded
- package MariaDB-client-10.1.43-1.el7.centos.x86_64 is excluded
#
Please help me solve this issue, thank you.
Try install mysql-server instead using: yum install mysql-server
I suspect you are suffering from the issue caused by MariaDB bug for InnoDB fails to start when fts table has FK relation as reported here: MDEV-20987
For quick relief from this problem, the only way to fix this issue is by downgrading the installation. Use following command to downgrade.
yum downgrade MariaDB-server MariaDB-common MariaDB-shared MariaDB-client MariaDB-compat MariaDB-devel
NOTE: Officially MariaDB has fixed the issue in the following unpublished versions:
10.1.43 [ 23703 ]
10.2.29 [ 23911 ]
10.3.20 [ 23909 ]
10.4.10 [ 23907 ]

openshift-liberty : jdbc drivers not getting loaded

Websphere Liberty server running on openshift getting below error on startup. As the workarea in liberty is created during start time how can we grant r/w access to the same
JVMSHRC155E Error copying username into cache name
JVMSHRC686I Failed to startup shared class cache. Continue without using it as -Xshareclasses:nonfatal is specified
Launching defaultServer (WebSphere Application Server 18.0.0.2/wlp-1.0.21.cl180220180619-0403) on IBM J9 VM, version 8.0.5.21 - pxa6480sr5fp21-20180830_01(SR5 FP21) (en_US)
[AUDIT ] CWWKE0001I: The server defaultServer has been launched.
[AUDIT ] CWWKG0028A: Processing included configuration resource: /config/project/server.xml
****[ERROR ] CWWKG0074E: Unable to update the configuration for webApplication with the unique identifier null because of the exception: /opt/ibm/wlp/output/defaultServer/workarea/org.eclipse.osgi/10/data/configs/webApplication!-908507812 (Permission denied)**.**
[WARNING ] CWWKG0076W: The previous configuration for webApplication with id null is still in use.
**[ERROR ] CWWKG0074E: Unable to update the configuration for applicationMonitor with the unique identifier null because of the exception: /opt/ibm/wlp/output/defaultServer/workarea/org.eclipse.osgi/10/data/configs/applicationMonitor!1812182506 (Permission denied).**
[WARNING ] CWWKG0076W: The previous configuration for applicationMonitor with id null is still in use.
**[ERROR ] CWWKG0074E: Unable to update the configuration for dataSource with the unique identifier null because of the exception: /opt/ibm/wlp/output/defaultServer/workarea/org.eclipse.osgi/10/data/configs/dataSource!1272470629 (Permission denied).**
[WARNING ] CWWKG0076W: The previous configuration for dataSource with id null is still in use.
**[ERROR ] CWWKG0074E: Unable to update the configuration for jdbcDriver with the unique identifier DB2 because of the exception: /opt/ibm/wlp/output/defaultServer/workarea/org.eclipse.osgi/10/data/configs/jdbcDriver_2!329917942 (Permission denied).**
Server.xml
<jdbcDriver id="DB2">
<library name="DB2JCC4Lib">
<fileset dir="${wlp.user.dir}/shared/resources" includes="db2jcc4.jar db2jcc_license_cisuz.jar" />
</library>
</jdbcDriver>
<dataSource jdbcDriverRef="DB2" jndiName="jdbc/abcdDB2DataSource">
<connectionManager maxPoolSize="25" minPoolSize="0" agedTimeout="21600s" connectionTimeout="180s" reapTime="180s" maxIdleTime="1800s"/>
<properties.db2.jcc databaseName="${env.DB_MF_DATABASENAME}" password="${env.DB_MF_PWD}" portNumber="${env.DB_MF_PORT}" serverName="${env.DB_MF_URL}" user="${env.DB_MF_USERID}" sslConnection="true"/>
</dataSource>
<applicationMonitor updateTrigger="mbean" />
<webApplication contextRoot="${env.APP_CONTEXT_ROOT}" location="abcd.war" />
DockerFile content
RUN mkdir -p /config/project && \
chown -R 1001:0 /config && \
chmod -R g+rw /config && \
mkdir -p /opt/ibm/wlp/installTmp && \
chown -R 1001:0 /opt/ibm/wlp && \
chmod -R g+rw /opt/ibm/wlp && \
chown -R 1001:0 /logs && \
chmod -R g+rw /logs && \
mkdir -p $HOME && \
chown -R 1001:0 $HOME && \
chmod -R g+rw $HOME && \
chown -R 1001:0 $JAVA_HOME/lib/security && \
chmod -R g+rw $JAVA_HOME/lib/security && \
mkdir -p /opt/ibm/wlp/output/defaultServer/workarea && \
chown -R 1001:0 /opt/ibm/wlp/output/defaultServer/workarea && \
chmod -R g+rw /opt/ibm/wlp/output/defaultServer/workarea
When using RHEL as the base OS we noticed that a sticky bit was being set on /output which was causing some troubles. Check out the places where we had to manipulate /output in this PR.
#ArthurDM, Thanks but was not able to get it working with sticky bit solution. But mounted the workarea folder in the container and got it to work
volumeMounts:
- name: lib-workarea-volume
mountPath: /opt/ibm/wlp/output/defaultServer/workarea
volumes:
- name: lib-workarea-volume
emptyDir: {}