I need to find a way to automatically copy the output of the below GoogleFinance formula into another cell and make it stick, i.e. doesn't change when the exchange rate changes.
=A1*GOOGLEFINANCE("currency:AUDGBP")
I was going to use something like =value(x) but this would change every time the above formula generated a new value, whereas I want something to stick as soon as it's output an answer.
There are many options, including:
Ctrl+C followed by Ctrl+
Shift+V (but could be tedious)
GAS (with help for which SO expects some demonstration of effort on your part - or already answered)
turn on iterative calculation (but in your case seems inadvisable)
perhaps the Spreadsheet Freezer add-on from one of our esteemed members (I've not tried it)
The GOOGLEFINANCE function has some optional parameters - one of them is the start date.
If you request the exchange rate for a particular date then it won't change later on.
=GOOGLEFINANCE("Currency:AUDGBP", "price", "05/31/2019")
The output is a little different - a range with the date and value rather than a single cell, but the value for the exchange rate is correct and won't change.
You can then use the INDEX function to extract just the exchange rate
=INDEX(GOOGLEFINANCE("Currency:AUDGBP", "price", "05/31/2019"), 2, 2)
As described here
if you want to play with button and script then:
function moveValuesOnly() { var ss = SpreadsheetApp.getActiveSpreadsheet();
var source = ss.getRange('Sheet1!A1');
source.copyTo(ss.getRange('Sheet2!A1'), {contentsOnly: true}); }
which will copy the value from Sheet1!A1 into Sheet2!A1
otherwise CTRL + C and CTRL +
SHIFT + V for manual copy
Related
I'm looking for more of a pointer to some documentation of a method here rather than an exact solution, I'm happy with JavaScript, haven't done much Apps Script and I'm moderate to OK familiar with Google Sheets functions but far from expert.
I have part of a Google Sheet with some date specific data on it like this:
Date
Some-Value
1 Jan 2023
123
15 Jan 2023
456
... etc
In another part of a sheet I have a cell with the current value of Some-Value. This cell in fact contains a formula that totals a column on another sheet for the values. In case it's not blindingly obvious, these dates are in fact sprint end dates and the Some-Value is a count of story points extracted from JIRA. So sort of like this:
Current Value of Some-Value
345
On exactly the date in the Date column I want to copy the value from the "Current Value of Some Value" cell into the cell in the "Some Value" column adjacent to that date. I don't care if that copy happens only once on that day, or several times on that day, or every hour on that day, or whatever. I just want it to happen at least once, automatically.
Should I be looking at an Apps Script function to do this, and roughly how should I do that? Or is there a simpler way of using some Google Sheets function to copy that cell?
You could potentially do this with formulas if you are willing to enable iterative calculation for your sheet. In that case, you could then write something like =if(A2=today(),currentValueCell,B2) (I'm assuming your Date/Some-value table is in A1:Bx of a sheet and you are placing the above in B2). This will return the current value only if the date matches, and then when the dates no longer match will just maintain whatever value is already present in the cell.
EDIT
Ah yes, I forgot that the initial state of a self-referencing IF is zero (rather than null) until a TRUE occurs. Try =if(A2=today(),currentValueCell,if(B2<>0,B2,)) to hide the initial zero generated when the date in A2 is not equal to TODAY().
If you need to copy a value than then it's going to be changed or erased, yes, you'll need an AppScript. If you already know something, you'll more than able to set a simple function to do it.
You can look into Installable Triggers that will help you to set when and how frequently you want your script to be fired; and it will notify you if there are errors in any of that executions.
Sometimes, matching dates can be tricky, more if you have them previously written. If you have to do a timestamp, then you'll probably succeed at first. Just for have it handy: https://developers.google.com/google-ads/scripts/docs/features/dates
Remember to always use Logger.log() to track the progress of your code and what it's returning. Good luck and here you can always ask for specific struggles you may find!
(I'm no expert at programming by far, since it's copying only a value, you may find useful to record macros and watch them to learn how to copy in the formats you need - only values, paste format, etc. - if you don't copy, you can also research in .getValue() and .setValue() )
In case anyone else comes across this in future, here is the somewhat creaky Apps Script function I developed to do this. It's my first Google Apps Script function so feel free to tear it to shreds.
I then added a trigger to run this function weekly, which was easier than I had thought -- a bit of google searching for Apps Script time based triggers found me the answer.
Nonetheless thanks to the people who answered earlier because the clues you gave me helped me find the answer in the end.
function updateUnderTest() {
var activeSheet = SpreadsheetApp.getActiveSpreadsheet();
var sourceSheet = activeSheet.getSheetByName('Supporting Data');
// I12 is the cell that gets updated daily with the story point count
var value = sourceSheet.getRange('I12').getValue();
// D3:E27 is the range containing date : value pairs
var data = sourceSheet.getRange("D3:E27").getValues();
// epochNow will be the current epoch time, in milliseconds
var epochNow = new Date().valueOf();
// Look through the data range to find a matching date
for (nn=0;nn<data.length;++nn) {
// If a match is found to the nearest day, break the loop
if ((data[nn][0].valueOf() < epochNow) && ((epochNow - data[nn][0].valueOf()) < (24*3600*1000) )) {break};
}
// only update if we found a match
if (nn < 24) {
sourceSheet.getRange(nn+3, 5).setValue(value);
}
}
Not sure if this is going to make sense but here I go.
What I want to do is to create a formula that isn't linked to a cell directly. In example: if I want to calculate carryweight for a tabletop game like D&D I would need the formula (strengthBonus x 5). For my current attempt I renamed the range (cell rather) strengthBonus to MOD_STR so when I put the formula =(multiply(MOD_STR,5) it works like a charm. Then I named that range "CARRYWEIGHT" and then use it elsewhere.
What I would like to be able to do is to make a new variable, similar to the way that "Define Named Range" does, but instead of relying on the variables being somewhere on the spreadsheet they would process from an internal formula. For example, if I type =carryweight into a cell it would run the equation =MULTIPLY(MOD_STR,5) in that cell and output the answer. I know nothing about code yet but have just been pointed in the direction of tutorials but I'm also asking for help here.
The code I have tried is
function CARRYWEIGHT(MOD_STR){
return MOD_STR*2}
and something else, I can't remember what but I got it to at least accept it in the spreadsheet. When I type it in I get an error stating that the outcome isn't a number.
I have no idea where to go from here.
Thank you in advanced for your help.
The difference between sheets formulas and Apps Script is that in Apps Script you need to retrieve the value of the range corresponding to the name of a named range
You cannot simply multiply the name of the range (which is a string!) with a number
Here is a sample of how to retrieve a range by name and make calculations wiht the value stored in it:
function CARRYWEIGHT(MOD_STR){
// retrieve all named ranges in the spreadsheet
var namedRanges = SpreadsheetApp.getActive().getNamedRanges();
//loop through all the results
for (var i = 0; i < namedRanges.length; i++){
var range = namedRanges[i];
//if the range with the name equal to the value of MOD_STR is found, get the cell content of this range
if(range.getName()==MOD_STR){
var value = range.getRange().getValue();
// perform the calculation with the cell content of the named range
return value*2;
}
}
}
From the cell, call the function as =CARRYWEIGHT("paste here the name of the range of interest"), do not forget the quotes (unless it is a cell reference)!
I hope this helped you to get started, for further understanding plese consult the following references.
References
Named Ranges
Loops
Conditional statements
Ranges
getValue()
I had a working Excel spreadsheet that used indirect() in the data validation and it worked fine. I uploaded it to sheets and converted it, now the indirect does not work.
I have found a link on the support forum that explains it does not work in Chrome but appears to work in Firefox, and the answers and workarounds seem to be for generating a secondary list... which is what I want, but in a data validation across a row.
I have knocked up a simple test sheet, hopefully public and the script editor is visible:
https://docs.google.com/spreadsheets/d/1KUgrdXKIKlk1DWvDOX9cY3B2VnRH_5h_vKuZJlqUlN8/edit?usp=sharing
Hopefully you can see what I'm after. I want the validation in C8 to be the list of items in the category based in B8; C9 based on B9 etc.
EDIT and Update
The question is about a replacement to indirect() in a data validation rule. While I did find a way round this by using indirect(), I preferred the version mentioned by Desire (to whom I have attributed the answer), but I thought I'd document my solution in case the sheet above becomes unavailable, or you cannot access it, or you just wanted a bit more detail.
So, for My Demo I have this:
In A1:C5 are my lists of data with the titles.
In the range B8:B12 I applied a data validation rule of value in range of A1:C1 - this gives the first dropdown.
In Cell E8 I put the formula =transpose(filter($A$2:$C$5, $A$1:$C$1 = B8)) and then copied this down to E12
Finally I put the following in a function and ran it in the script editor.
function runMeOnce() {
var dst = SpreadsheetApp.getActive().getSheetByName('Sheet1').getRange('C8:C12');
var rules = [];
for (var i = 8; i < 13; i++) {
var src = SpreadsheetApp.getActive().getSheetByName('Sheet1').getRange("E" + i + ":H" + i);
var rule = SpreadsheetApp.newDataValidation().requireValueInRange(src).build();
rules.push(rule);
}
dst.setDataValidations(rules);
}
That's all there is, no more onEdit() triggering.
NOTE There is one downside I bumped into with this method though. I have this in place for 6000+ rows in my actual spreadsheet, and across multiple sheets, with some dropdowns having 50-100 items in. This solution seriously eats into the (current) 2 million cell limit.
Hope this helps someone.
Data Validation rule of the type "List of items" takes only a comma-separated list of values as its parameter, and does not evaluate any formulas you try to put there. It does not matter what the function returns, because it will not be called. If you put, say "=sqrt(A10)" in the field "List of items", that only means that the validation rule will require the string "=sqrt(A10)" to be entered in the cell.
Similarly with "List from a Range". Either what you enter parses as range notation, or it does not. The string "=getValidationRange(B8)" does not parse as range notation, hence the error. The function is never called.
The only type of validation that calls a function is "Custom formula". If you use it, then the validation can be performed as intended: for example,
=match(C8, filter(A2:C5, A1:C1 = B8), 0)
requires the content of C8 to be in the column of the table A2:C5 under the heading that matches the category in B8. However, with a custom formula you do not get a dropdown in a cell.
To get a dynamic dropdown, one can either
Use an auxiliary range
For example, enter filter(A2:C5, A1:C1 = B8) in cell F1, so that the F column is for the categories currently selected. The data validation would be "List from a Range", F1:F. This is a fine workaround for one validation rule, but takes more work when you have multiple ones.
Use a triggered script
Use a script that is triggered on edit and sets data validation rules accordingly; this is discussed in How do you do dynamic / dependent drop downs in Google Sheets? among other places.
Based on the sacrificing a goat issue, I did find a simple(ish) way around the problem that still uses indirect().
Set up the named ranges as previously using the titles in CamelCase. In my example I have CatA, CatB, and CatC - i.e. the white space needs removing.
At the end of a row (or in another sheet) transpose the chosen named range (in cell E8: =transpose(indirect(substitute(B8, " ", ""))) copy this down as far as you need.
At this point it's good to note that because we are unsing builtin functions, the speed is so much better, as can be seen by my example.
Now the painful bit. For each subcategory cell (C8, C9 etc in my example), you need to add the validation independently as a range of E8:ZZ8 (obviously ZZ8 needs reigning in a bit) and E9:ZZ9 etc. It doesn't seem to do referential so if you select all the cell in the column, they all only look at the data you specifically type in the box... I might just not have worked out R1C1 notation here, however. I tried.
This can be scripted on GAS to create the R1C1 validation function and then apply it to the range.
Alright, I'm stuck.
I've got a sheet that an entire team of people use to communicate with each other and sign up for timeslots for internal logins.
I've got the sheet formatting performing the way I want to, but, it's too easily edited by people, because they have to be able to edit the values in the cells.
It's currently running Conditional Formatting rules, based upon time/date. Basically, if the cell's timeslot has passed, then it's blacked out. It is also blacked out if the cell isn't associated with the current day.
https://docs.google.com/spreadsheets/d/1TP5iJ9AA_xqDQPiyl89ntZehd7aqDPELcN0bRMGP-SU/edit?usp=sharing
I'm trying to create a script that "onEdit" will restore any formatting (not the value) that had been changed during the edit.
Got it this far, but I'm struggling to make it conditional like the UI rules allow me to do.
function myFunction() {
var sheet = SpreadsheetApp.getActive().getSheetByName('Sheet1');
var range1 = sheet.getRange('A1:B10');
range1.mergeAcross()
range1.setBackground('white');
range1.setBorder(true,true,true,true,true,true);
range1.setFontColor('black');
range1.setFontFamily('Arial');
range1.setFontSize(10);
range1.setFontWeight("normal");
range1.setFontStyle("normal");
range1.setHorizontalAlignment("left");
range1.setVerticalAlignment("center");
range1.setWrap(false);
}
Here's where I'm struggling (notes inserted)
function myFunction() {
var sheet = SpreadsheetApp.getActive().getSheetByName('Sheet1');
var range1 = sheet.getRange('A1:B10'); // I'd have this repeated for multiple ranges
range1.mergeAcross()
range1.setBackground('white'); // Need an "IF" argument for this, such as if today is Wednesday and time is before 2:30pm, then white, otherwise black. Could probably put this at a different point in the script.
range1.setBorder(true,true,true,true,true,true); // All the following attributes would simply restore defaults
range1.setFontColor('black');
range1.setFontFamily('Arial');
range1.setFontSize(10);
range1.setFontWeight("normal");
range1.setFontStyle("normal");
range1.setHorizontalAlignment("left");
range1.setVerticalAlignment("center");
range1.setWrap(false);
}
Thanks in advance for any help you might offer!
Adam
I've actually been trying to deal with this same problem.
Sadly, google scripts doesn't seem to have a way programmatically set the conditional programming. (Here's a link to the issue. You can cast a vote at the bottom on to get them to implement it)
However, I think you might be able to implement a solution to your problem it by scratch.
The onEdit trigger passes a variable to the function it's assigned to.
function testOnEdit(e) {
Logger.log(JSON.stringify(e));
}
Here is an example of the JSON from the event object for onEdit.
{"range":{"columnStart":3,"rowStart":2,"rowEnd":2,"columnEnd":3},"source":{},"value":"I typed this into B3!","authMode":{},"triggerUid":*********}
You might be able to use this to directly reset the format of the cells they edit. BUT... Unfortunately, onEdit is only fired when a range's values are changed--not when formatting is changed, not when data validation is changed, not when conditional formatting is changed--so to catch the cases that some rouge user decides that purple looks nice, you may want to also make the script run every minute using a timed trigger (but you need to make sure it doesn't take too long to run since it will be going off every minute and google puts a limit on total amount of time triggers can run).
As for comparing dates, these functions may be useful, but be warned that they return the local time (if you have users from multiple time zones you may need to convert to UTC).
function myFunction() {
var date = new Date();
date.getDay(); // the value returned by getDay() is the index of the day of the week, where 0 is Sunday, 1 is Monday...
date.getHours(); // the value returned by getHours() is an integer between 0 and 23
date.getMinutes(); // the value returned by getMinutes() is the current minute in the range 0-60
}
Since I too am dealing with this problem, I plan to add more insight to this solution later. Let me know if you have any insights, Adam.
This is my first post. I tried searching via Google and this site but really couldn't find any info about typecasting or converting numerical values within GAS specifically in this scenario. So here the problem:
I have a very basic script attached to a Google Spreadsheet. The script simply keeps track of the last row that was populated, increments the value by one, so that the next row can be populated. I'm storing the "last row used" as a Project Property. For some reason, the script keeps writing the value back into Project Properties as a decimal value, which throws off the whole script since it seems I can't use a decimal value to reference a cell location.
Here is the code snippet:
function onEdit(e) {
var ss = SpreadsheetApp.getActiveSpreadsheet();
var value = ss.getSheetByName("Sheet1").getRange("D13").getValue().toString();
var last = ScriptProperties.getProperty("last");
var therowx = parseInt(ScriptProperties.getProperty("therow"));
Browser.msgBox("The last row is: " + therowx);
if( value != last ) {
ScriptProperties.setProperty("last", value);
ScriptProperties.setProperty("therow", therowx + 1);
}
}
Assuming that I've pre-set the Property to 1 before running the script, once this method fires, it sets it to 2.0 instead of just 2. I've tried wrapping the method call with the Number() and parseInt() functions but they don't seem to make a difference.
I'm open to suggestions, as I'm sure I'm doing something wrong but just not quite sure what.
It would appear that you are using a value from the spreadsheet with var value = ss.getSheetByName("Sheet1").getRange("D13").getValue().toString();
This is were you are getting the decimal as Google spreadsheets will default to one decimal place. You will need to highlight the column or cell and change the format to Number>Rounded to get rid of it.
I am sure i am missing some components of your full script here, however have you tried the "getLastRow" function? There are some scripts in the tutorials that use it and it is a tried tested and true method of finding the last row of the sheet.