Burp Interception does not work for localhost in Chrome - google-chrome

I can't intercept requests made by Chrome version 73.0.3683.86 to my localhost site.
Local host site is running on IIS on http://127.0.0.3:80
Burp proxy lister is default one on 127.0.0.1:8080
Interception rules are default one as well
In my LAN settings, "Bypass proxy server for local addresses" is not enabled
When Interception is turned ON and I reload page in Chrome browser, no request is "caught" by Burp, my local site loads and only the external requests are intercepted, such as loading external scripts from CDN.
Also under "Proxy" > "HTTP History" there is only request to external sites, and all requests to http://127.0.0.3:80 are not recorded.
When I reload same page by Internet Explorer 11, initial GET request is intercepted by Burp, as expected. Also "Proxy" > "HTTP History" shows all the requests to local site http://127.0.0.3:80
What is the problem with the Chrome? Thanks!

Found the solution late yesterday. I am using the Chrome extension ProxySwitchy, but it doesn't matter if you use that or the system proxy configuration. The solution works the same way.

You can solve this problem by adding an entry in /etc/hosts file like below
127.0.0.1 localhost
127.0.0.1 somehostname
Now burp will intercept request from somehostname

Which version of Chrome are you using?
Have you tried using the FoxyProxy Chrome extension?
As a workaround, you could modify the hosts file on your machine.

I experienced the same issue when I upgraded from Opera 58.0 to 60.0. I think that this is Chrome related, because I've also experienced it in all other Chrome browsers. Opera 58 utilizes Chrome 71.0.3578.98. Opera 60 utilizes version Chrome 73.0.3683.103. Something was definitely updated in Chrome between these versions to cause this problem to happen.

You have to subtract the implicit bypass rules defined in Chrome (https://chromium.googlesource.com/chromium/src/+/master/net/docs/proxy.md#Implicit-bypass-rules)
Requests to certain hosts will not be sent through a proxy, and will
instead be sent directly.
We call these the implicit bypass rules. The implicit bypass rules
match URLs whose host portion is either a localhost name or a
link-local IP literal. Essentially it matches:
localhost
*.localhost [::1]
127.0.0.1/8
169.254/16
[FE80::]/10
https://chromium.googlesource.com/chromium/src/+/master/net/docs/proxy.md#Bypass-rule_Subtract-implicit-rules
Whereas regular bypass rules instruct the browser about URLs that
should not use the proxy, Subtract Implicit Rules has the opposite
effect and tells the browser to instead use the proxy.
In order to be able to proxy through the loopback interface, you have to add the entry
<-loopback>
in the list of hosts for which you don't want to a proxy. It is a bit confusing, indeed.

Make sure you haven't enabled socks proxy option, it happened with me too and i found the solution when i disabled the socks proxy option, just make sure it's disabled!
Example:

It helped me
I turned on this settings

Related

This Set-Cookie didn't specify a "SameSite" attribute and was default to "SameSite=Lax" - Localhost

I'm a front-end developer working on an application where the login/ response put a Session-Cookie on the client. The later request will be authorized since the user "logged in".
Starting from Chrome 80
All cookies without a SameSite attribute will be treated as if they had SameSite=Lax specified. In other words, they will be restricted to first-party only (server and client on the same domain).
If you need third-party cookies (server and client on different domains), then they must be marked with SameSite=None.
Restricted to first-party by default
Set-Cookie: cname=cvalue; SameSite=Lax
Allowed in third-party contexts
Set-Cookie: cname=cvalue; SameSite=None; Secure
For my application, I want the default behavior. My client and server running on the same domain in production. But in development I'm working from localhost (different domain).
Up until now, chrome had special flag under chrome://flags - SameSite by default cookies. I could Enable this flag on my development machine and the login passed. And in production, I didn't need this flag because I wanted the default behavior.
Starting from Chrome 91
The SameSite by default cookies flag was removed. This means that from this version I can't login into my app, without deploying it to production.
Does anybody knows how can I get the Session-Cookie while working from localhost. But still keeping the security of SameSite=Lax. If possible with client only changes, but if needed also with server changes.
Chrome DevTools - SameSite error message
Chrome 80 Flags menu - These flags removed in Chrome 91
Update
I tried to solve this by making the server use SameSite=None (development only).
This causes a different error: Connection isn't secure. This is because when using SameSite=None you are required to add the suffix Secure and of curse use HTTPS connection.
Secure connection has its own problems like having to pay for a Certificate in development.
Workaround: Downgrade Chrome
This is not a solution! just a temporary workaround for anybody like me how got his work halted due to this update.
Uninstall Chrome
Go to "Add or remove programs" and uninstall Chrome. Notice that user data like cookies and saved browser passwords may be lost.
Download Chrome v90 from slimjet.com, or from any other site. Then install Chrome.
Prevent auto-update Chrome, according to this StackOverflow solution: open C:\Program Files (x86)\Google\Update
rename the file GoogleUpdate.exe to GoogleUpdate2.exe.
This will cause Chrome to not find the update package.
Update Flags - Open Chrome and type: chrome://flags
Search #same-site-by-default-cookies and Disable the flag
I have found a way to fix it and share it with everyone :-)
Description appears in the issues section:
Specify SameSite=None and Secure if the cookie should be sent in
cross-site requests. This enables third-party use.
In the Developer Tools section, go to the Application tab, and on the left side to Cookies:
The cookie that you want to share with other domains, mark the Secure
check and in Samesite put None. Update the site tab locally and you
will be able to use the cookies that allow you to send through the
domain of origin
I hope this brightens your day
As of Chrome v107 (Nov 2022)
I had a similar issue, spent a few hours digging, and what I found is that the only solution for Chrome is to make your front-end connection secure, ie https (using a proxy for instance): Link
An alternative solution is to use Firefox and set: about:config > network.cookie.sameSite.noneRequiresSecure=false. This allows SameSite=None; Secure=false
In our case, we are able to also run our server locally on a different port and point our client app to that localhost address for development purposes.
For example, I have the client app running on localhost:1234 and sending requests to a local copy of the server running on localhost:5678. This ensures that cookies are set successfully since the client and server are now "SameSite".
Admittedly, this is perhaps more of a workaround than a solution, but I hope it helps in the short term.
If you want to perform "unsafe" CORS requests (which means performing a POST/PUT/DELETE request) you will need to modify the tomcat conf/context.xml file, to set sameSiteCookies to "none" instead of "lax".
...
<!-- default samesite cookies configuration, for CORS set sameSiteCookies to "none" and configure bundle for HTTPS -->
<CookieProcessor sameSiteCookies="none" />
...
You can set the SameSite attribute manually to "None" + tick "Secure" inside the devtools for development.
That way you would not have to modify your production environment (keep the cookies as SameSite=Lax).

Error "ERR_HTTP2_INADEQUATE_TRANSPORT_SECURITY" in Google Chrome while accessing locally hosted SPA

I've a locally hosted SPA (Kestral/.Net core). It is using a self signed certificate for HTTPS communication (generated through Server Certificates in windows 10).
It works well with IE11, however when accessed from Google Chrome, shows up error - ERR_HTTP2_INADEQUATE_TRANSPORT_SECURITY.
Any clues on what could be done to overcome this?
Troubleshooting done so far:
Custom cipher suites order.
Disabling HTTP2 through windows registry.
To use HTTP/2 you must be using TLSv1.2 and cannot use a number of blacklisted, less secure ciphers. This basically means you must use one of the GCM ciphers like TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 (though other newer ciphers like TLS_CHACHA20_POLY1305_SHA256 are also support).
If you only have older ciphers configured then Chrome will fallback to HTTP/1.1 or, if that is not available, it will error with that error message.
Adding if it helps anyone digging on same thing, for Kestral setting Protocol Version to http1 looks to be the way to overcome this issue, as Cipher suite doesn't looks to be configurable in kestral at least with .Net core 3.1.

How to avoid the "Your connection is not private" screen when developing an HTTP2 site locally?

When I'm developing using Node's http2 library (which only supports HTTPS, not HTTP), when I open localhost in Chrome, I get a warning screen:
Your connection is not private
Attackers might be trying to steal your information from localhost (for example, passwords, messages or credit cards). Learn more
NET::ERR_CERT_AUTHORITY_INVALID
You have to click "Advanced" then "Proceed to localhost (unsafe)". It gets annoying having to do this during development.
I generated a cert and key for localhost use according to the instructions for Node's http2 module. Is there any way to generate them in such a way that Chrome would actually accept them for localhost? Or is there another easy way to get rid of this warning?
(I'm aware of the option of launching Chrome with --ignore-certificate-errors but I'd prefer not to do this for all websites.)
Try the following:
In Chrome, put in chrome://flags/#allow-insecure-localhost in the address bar.
Enable the option that says "Allow invalid certificates for resources loaded from localhost".
Restart Chrome, and it should allow the site.
You can also type thisisunsafe once you put focus on the website
There are two options you can use to get rid of this annoying thing, which are:
Temporarily Disable SSL Warning
You can go to Google Chrome, input chrome://flags in the address bar and press the Enter key to access advanced settings.
In the next step, find the "Allow invalid certificates for resources loaded from localhost" option and enable it. This method is the same as using --ignore-certificate-errors attribute on your Google Chrome shortcut. It disables the SSL warning for all sites.
It's just a temporary solution and I wouldn't suggest to use this frequently.
(I'm aware of the option of launching Chrome with
--ignore-certificate-errors but I'd prefer not to do this for all websites.)
Install SSL On Your Localhost with OpenSSL
You can install SSL on your localhost with OpenSSL. By using this method, your localhost can run HTTPS without any issue at all. The tutorial is quite long with detailed instructions, you can read it at here.
Source: Fix Your Connection Is Not Private Error In Your Browser - ByteBiteBit.com
I tried too many techniques but nothing works at last i find it while i was learning Webapi.
i was unable to visit to any side beacuse of showing the Error "Your Connection is not Private"......
THE REASON IS You have to enable SSL on your Browser and how you can do it let me share the link..
Just follow the steps
https://www.youtube.com/watch?v=4hb6iD3nP6g&list=PL6n9fhu94yhW7yoUOGNOfHurUE6bpOO2b&index=16
chrome://flags/#allow-insecure-localhost in the address bar.
set it to Enabled
relaunch chrome
result

HSTS workaround for Chrome for Dev Environment

We are looking for a way to have Chrome bypass the HSTS requirements for our dev environment.
We are working on a project for https://foo.com.
Within our organizations internal dns we have DNS entries for foo.com.dev which points to our internal dev server which has historically allowed us to reach our dev server via https://foo.com.dev. Secure web requests to this site have always been met with a security warning that we have been able to bypass but in a recent build of Chrome it seems that the ability to bypass the warning has been removed. We can continue to use this method in IE but would like to be able to test Chrome as well.
Additionally, developers have been able to use there own machine names as suffixes. For example a https://foo.com.workstation10
Any suggestions would be very welcome because the prospect of reconfiguring our entire dev environment is not a pleasant one.
To be clear - access to these sites are entirely limited to internal users by both firewall setup and dns configuration.
You can try one of the following options:
Send the Strict-Transport-Security header only for foo.com, and do not specify includeSubDomains.
Make self-signed certificates for foo.com.dev on server and import in on your local device's chrome.
If your target domain is restricted only for internal purpose, you can bypass it just typing badidea in the chrome window. Further details are available here
For more details about HSTS refer HSTS RFC

How do you fix "Your connections isn’t private" when opening with the Google Chrome browser?

I'm debugging a local site.
I'm getting the following message in chrome.
Your connection is not private
Attackers might be trying to steal your information from t.buyamerica.com (for example, passwords, messages, or credit cards). Learn more
NET::ERR_CERT_COMMON_NAME_INVALID
This is not new, and normally I just click ADVANCED and Procced ...
but lately it just stuck in a loop and display the error message again.
This is a local site therefore the key-pair is indeed invalid, but is there a way to by-pass this issue without installing a proper https for all my local (vagrant based) servers?
NOTE:
The current by-pass for me is to use the same domain as the original site, so that the local site is www.somesite.com, and the actual site is somesite.com
I solved this issue as follow:
In
System Preference -> Network -> WiFi -> Advanced -> Proxies I saw that Secure Http Proxy (HTTPS) is checked and the value for the proxy is localhost:8888
I unchecked the Secure Http Proxy (HTTPS) and it seems to solve the issue.
NOTE: this is a specific MAC issue that apparently caused by a system upgrade (my current version is 10.10.5 (14F2511) Yosemite, MacBook Air (13-inch, Mid 2012))
I never set a proxy server or run any proxy on localhost:8888
You change your local domain something like http://yourdomain.test.
Don't forget the 'http'. And if you're using .dev, change it to .test