I'm trying to make my server accessible from the net.
I have problem with configuration of NAT in the router. I don't know what I'm suppose to write in 'Remote Host'. Should I put the Static ip(ISP) there or the dynamic adress of the host that will connect to my server or nothing ?
nat configuration image
local adress of the server : 192.168.1.11
I don't know the specifics of your router, but I'm guessing this field will limit incoming connections to only be allowed from a specific remote IP. So should be left empty in your case as it already is.
Related
I am using a software - (Ingress) by FingerTec which uses mysql database.
Some setups of this system are only using a single installation - consisting of a mysql server and a client locally on the same machine.
I have been having issues since I started to use the software when it is installed on a user's laptop/PC. The problem is that frequently when running the mysql server and client, a window pops up asking for the local IP address and port (127.0.0.1 and 3306 by default). To continue using the software, one needs to run IngressDB installer where you need to 'Update Connection' by giving the root user and pass for mysql and then 'Upgrade Database' to refresh the database for any new settings. After this step the software runs fine.
Yesterday I managed to simulate this issue by changing the static IP on my laptop while connected directly to one of their Access Controllers. I had to re-Run Ingress DBinstaller.
Now my question is this:
When using your machine(laptop/pc) it is normally getting IP add, def GW, Subnet etc from a dhcp server therefore there is no guarantee that you will always get the same IP leased unless there is a reservation to the machine's mac address.
As described earlier - when ever there is a change of IP address leased from DHCP, a window pops up showing the loopback address 127.0.0.1 and the mysql port 3306. So it never shows the local IP address (ex. 192.168.1.100). So I was thinking - why is the loopback IP not enough for mysql client/server as this stays the same forever.
Is is normal that software using mysql database server requires a static local IP on the machine hosting it? I am referring only to instances where both mysql server and client reside on the same machine.
I appreciate your thoughts about this and maybe any other way I can get around this apart from making an IP address reservation in the DHCP server. Setting a static IP address manually on the LAN adapter is no solution for me as this would limit the machine to connect only to a certain network and cannot be used at other places.
If the client is the same local machine as the server, the MYSQL server specifically does not need a static IP because it pretty much already has one: 'localhost' or '127.0.0.1'. If the client is not on the same machine as the server, the server would need a static IP.
If the machine is acting as a server for other content, yes, it would need a static IP. If you're doing this at home, chances are that your access point will let you configure it for a static IP.
Can I connect Zabbix server if I don't have client's IP , to be more specific I don't have any information about client except for information that I'm going to put in Zabbix agent config file like some name.
For example: I have several hosts in several different local networks and I want to get some information from them, but I don't know the IP address of host or router and I can't setup port forwarding on router, I just want to setup agent to be able to connect server over the internet that's all. Is that even possible?
Yes, use the active agent items only. Set the Zabbix server IP address in the ServerActive parameter and make sure the agent hostname matches the host name in the server (not the IP, not the DNS name).
I created successfully a apache server but I dont want to connect to it by typing 192.168.0.102, I want a normal url like www.google.com. How can I do that? I went to httpd.conf and found the ServerName line but setting it to something like www.mysite.com doesnt seem to work. I also tried to use my external ip(https://www.whatismyip.com) as server name but it doesnt connect. It only works if I try to connect to 192.168.0.102 or localhost. How do i solve this? Thanks
There are three basic things you need to know.
Virtual name hosting
HTTP allows multiple websites to be hosted on the same IP address and port. The client uses the Host request header to tell the server which site it wants to get data for.
ServerName is used as part of this.
… but the client needs to know how to send a request to the server first.
DNS
When a client makes a request to a server, it uses the IP address of the server in order to allow it to be passed over the network (or networks) to it. It is the address.
IP addresses are sequence so of numbers, which aren't very friendly for humans to work with.
DNS translates friendly names (like www.example.com) into IP addresses.
The client has to look up the name to find the IP address. It normally does this through the main DNS system, and in order to get your name linked to your IP address you will need to find a domain name registrar and pay them.
It is also possible to set up DNS at a local level on a private network, and on a computer-by-computer level using a hosts file.
Routing
The IP address of the server has to be routable from the computer the client is running on.
192.168.0.102 is a private address, accessibly only on the same LAN. To make it accessible to clients on the Internet you need to either:
Set up your router to use port forwarding and then use the Internet facing IP address of the router (which https://www.whatismyip.com tells you) or
Give your computer a public IP address and configure your router to route traffic to it (this generally isn't possible on consumer grade routers).
In short, you can't. 192.168.0.102 is not accessible from the Internet it is internal IP.
But you have some alternatives, like if you like to access your computer from a hostname you can use dynamic DNS servers.
Or you want to test your code on a spectacular domain, you can add 192.168.0.102 with a domain to your hosts file, then only you can use this domain with your local computer.
But, If you really want to serve some content to the Internet from your local computer you have to find a DNS server service (like cloudflare) to point your domain to your public Internet ip not to 192.168.0.102.
You configure the virtual host and set the server name to the domain name you want. After that, Apache will check the requests and will use that virtual host if a request was made for that domain name. In order for that to work, that domain should point to your IP address where the server is running.
If you want to test if the configuration works, edit your /etc/hosts file and add that domain name to 127.0.0.1. After that you will be able to access to that virtual host if you try to access to that domain name from your browser.
More info here : https://httpd.apache.org/docs/current/vhosts/name-based.html
I have created a HTTP load balancer to basically redirect from port 80 to port 8080. The server on my instance is running on port 8080.
I can connect to the server directly but the LB is not able to connect to the instance, both accessing the LB's IP directly and also the health check always fails. The instance group the LB is using consist of just that single instance.
I read Google Compute Engine health checks failing
and the google-address-manager is running. However, when running ip route table list local there is no routing for my LB. The user in the above question is using Network load balancing and not HTTP load balancing (as I am) so I don't know if that is related?
Or perhaps it's related to a firewall? I have added my LB's ip address to a firewall rule that allows tcp:8080
Does anybode have any idea how can I fix this? I am not experienced with debian nor gcp.
Show I just try and run the route add command referenced in the above question? If so, how come the google-address-manager is not adding the route?
Thank you in advance!
You need to make sure that your port mapping on instance group is set to correct port, the 8080 in your case.
First, edit your instance group and change the port name and port to 8080:
Then, navigate to your http backend's settings and change the default port to the port name you've configured in your instance group.
Finally, make sure that your firewall rules allow access on port 8080 from 0.0.0.0/0 or at least from the IP address of HTTP load balancer (130.211.0.0/22)
I had the same issue and fixed it by adding a firewall rule for the health checker (which is not the same IP as your LB!). See https://cloud.google.com/compute/docs/load-balancing/health-checks?hl=en_US#http_and_https_load_balancing for instructions.
In my case, I did not configure the HTTP health check correctly.
I used "/" as path, but on my backend, "/" redirects to a login-page (HTTP 301), which responds with a HTTP 200.
The health check does not follow a redirect, every HTTP response code != 200 is assumed unhealthy (from Debugging Health Checks in Load Balancing on Google Compute Engine).
So, I changed my path to "/login", this fixed my issue.
I have a VB.NET application that can connect to the SQL Server through LAN base, but how can I connect to it through internet, the application need to use outside, I know i need to use the public IP instead of using the IP address of the server but my public IP address that I've set in connection string can't connect to the server, Here's my connection string
Dim connstr$ = "Server=xxx.xx.xx.xxx\SQLEXPRESS,xxxx;Initial Catalog=sample_db;Integrated Security=True
Public conn As New SqlConnection(connstr)
I've try also to set the port and change the firewall restriction,enabled the TCP etc. and search a lot here but still doesn't work
Here's our network setup
PC-->router-->internet modem
1433 is the default sql server communication port. Port 1433 should be forwarded to the local IP address where your sql server runs.
1) Make sure that port 1433 is the valid communication port for sql server. You can check it from sql server configuration tools. Use actual port number rather than 1443 if it was changed by someone.
2) Find NAT (Network address translation) menu in your modem or router administration panel.
3) Forward port 1433 to your server's local IP address
4) Restart device
As a note that, your modem does not require a static IP. Your device most probably might have a new IP address after every restart. But it would be valid until you restart it once more. You can use this IP address in order to access your database remotely. It would be better but you don't have to get a static IP address.
UPDATE: You should also be sure that, port is not blocked by a program on the server such as a virus or security program.
Good luck
Google "port forwarding", which is also called Network address translation or "NAT".
The other answers are perfect but searching for the term on google should get you an idea on what it is, and how to go about it. Add your router name to the search for exact steps.
In short forward the port that SQL Server is listening on, from the router to the server machine. You will need to do some configuration on the router for that by opening the admin page. For how and details, Google "port forwarding"