I use the following logback pattern:
<pattern>%X{version} %d{HH:mm:ss.SSS} %.-1level %C{0}:%M:%L %msg %n</pattern>
This produces a nice output if version is set but there are valid cases when it can be empty.
In this case, there is a leading whitespace in every logline (resulting from the space between %X{version} and %d{HH:mm:ss.SSS}).
The simple solution is to remove the whitespace from the pattern and append it to the value of version. Is there a more elegant way to solve this?
Related
Imagine that I have the following XML element with multi-lines value \nline2,
<address>
line2</address>
I'm using dom4j Element's getText(), but it trimmed the empty line (the \n) and returned line2.
Is there a way to retrieve the raw value \nline2 without trimming?
I doubt that. You probably used getTextTrim().
Is it real to set input pattern to all as usually, but with one exception: url are not acceptable. I mean for example all input patterns are ok, but:
ftp://example.com
http://example.com
https://example.com
we could not enter...
is it real to do without using javascript or no ?
With JavaScript and using the regex found here: What is the best regular expression to check if a string is a valid URL?, you could do something like this:
function isValid(inputVal){
return !/((([A-Za-z]{3,9}:(?:\/\/)?)(?:[-;:&=\+\$,\w]+#)?[A-Za-z0-9.-]+|(?:www.|[-;:&=\+\$,\w]+#)[A-Za-z0-9.-]+)((?:\/[\+~%\/.\w-_]*)?\??(?:[-\+=&;%#.\w_]*)#?(?:[\w]*))?)/.test(inputVal);
}
isValid(document.getElementById("inputID").value);
EDIT
Without JavaScript you can do it like such
<input pattern="^(?!((([A-Za-z]{3,9}:(?:\/\/)?)(?:[-;:&=\+\$,\w]+#)?[A-Za-z0-9.-]+|(?:www.|[-;:&=\+\$,\w]+#)[A-Za-z0-9.-]+)((?:\/[\+~%\/.\w-_]*)?\??(?:[-\+=&;%#.\w_]*)#?(?:[\w]*))?))" >
^ # start of the string
(?! # start negative look-ahead
.* # zero or more characters of any kind (except line terminators)
foobar # foobar
)
Choose the URL validation regex from internet ( or write your own :) ).
Put it in negative look-ahead (?!).
Add .* for match everything else.
Use your new regex in pattern attribute of the inputs.
For example if the URL validation regex is ^(((https?)|(ftp)):\/\/)?([\da-z\.-]+)\.([a-z\.]{2,6})([\/\w \.-]*)*\/?$ the inputs will be like
<input type="text" pattern="^(?!(((https?)|(ftp)):\/\/)?([\da-z\.-]+)\.([a-z\.]{2,6})([\/\w \.-]*)*\/?).*$" />
Note: not every regex will work if you add it in negative look-ahead so just use JavaScript and inverse the result of the original regex. Also your input must be inside a form to trigger the patern validation (on form submit).
The question indicates you already know the regex and just want to know whether you should be using Javascript (or HTML) for this. The answer would be: probably not.
If you are filtering input for - say - a forum, using Javascript would be a bad idea because it runs locally, so the user can easily avoid the check. Use a server-sided language (most-probably PHP) to do the check.
I have a single text field that contains HTML markup. The system that generates this field content always seems to generate a first line with a non-visible carriage return value in it and I can't seem to prevent if from doing so.
Does anyone know of a way (perhaps using a Regular Expression), to remove that first line from this text field?
I'd prefer to leave all other instances of the carriage return values in the field as is, so if it's a RegEx statement that will just remove the first line of a text field, that would work for me.
Any suggestions most welcomed.
Cheers,
Wayne
Usually the trim (often removes whitespaces, CR ) method is used for this in many programming languages. You did not state in what language you will be doing this...
I have a regex '^[A0-Z9]+$' that works until it reaches strings with 'special' characters like a period or dash.
List:
UPPER
lower
UPPER lower
lower UPPER
TEST
test
UPPER2.2-1
UPPER2
Gives:
UPPER
TEST
UPPER2
How do I get the regex to ignore non-alphanumeric characters also so it includes UPPER2.2-1 also?
I have a link here to show it 'real-time': http://www.rubular.com/r/ev23M7G1O3
This is for MySQL REGEX
EDIT: I didn't specify I wanted all non-alphanumeric characters (including spaces), but with the help of others here it led me to this: '^[A-Z-0-9[:punct:][:space:]]+$' is there anything wrong with this?
Try
'^[A-Z0-9.-]+$'
You just need to add the special characters to the group, optionally escaping them.
Additionally if you choose not to escape the -, be aware that it should be placed at the start or the end of the grouping expression to avoid the chance that it may be interpreted as delimiting a range.
To your updated question, if you want all non-whitespace, try using a group such as:
^[^ ]+$
which will match everything except for a space.
If instead what you wanted is all non-whitespace and non-lowercase, you likely will want to use:
^[^ a-z]+$
The 'trick' used here is adding a caret symbol after the opening [ in the group expression. This indicates that we want the negation of the match.
Following the pattern, we can also apply this 'trick' to get everything but lowercase letters like this:
^[^a-z]+$
I'm not really sure which of the 3 above you want, but if nothing else, this ought to serve as a good example of what you can do with character classes.
I believe you are looking for (one?) uppercase-word match, where word is pretty much anything.
^[^a-z\s]+$
...or if you want to allow more words with spaces, then probably just
^[^a-z]+$
You just need to put in the . and -. In theory, you don't need to escape because they are inside the brackets, but I like to to remind myself to escape when I have to.
'^[A-Z0-9\.\-]+$'
Try regular expression as below:
'^[A0-Z0\\.\\-]+$'
escaping html is fine - it will remove <'s and >'s etc.
ive run into a problem where i am outputting a filename inside a comment tag eg. <!-- ${filename} -->
of course things can be bad if you dont escape, so it becomes:
<!-- <c:out value="${filename}"/> -->
the problem is that if the file has "--" in the name, all the html gets screwed, since youre not allowed to have <!-- -- -->.
the standard html escape doesnt escape these dashes, and i was wondering if anyone is familiar with a simple / standard way to escape them.
Definition of a HTML comment:
A comment declaration starts with <!, followed by zero or more comments, followed by >. A comment starts and ends with "--", and does not contain any occurrence of "--".
Of course the parsing of a comment is up to the browser.
Nothing strikes me as an obvious solution here, so I'd suggest you str_replace those double dashes out.
There is no good way to solve this. You can't just escape them because comments are read in plaintext. You will have to do something like put a space between the hyphens, or use some sort of code for hyphens (like [HYPHEN]).
Since it is obvoius that you cannnot directly display the '--'s you can either encode them or use the fn:escapeXml or fn:replace tags for appropriate replacements.
JSTL documentation
There's no universal working way to escape those characters in html unless the - characters are in multiples of four so if you do -- it wont work in firefox but ---- will work. So it all depends on the browser. For Example, looking at Internet Explorer 8, it is not a problem, those characters are escaped properly. The same goes for Googles Chrome... However Firefox even the latest browser (3.0.4), it doesn't handle escaping of these characters well.
You shouldn't be trying to HTML-escape, the contents of comments are not escapable and it's fine to have a bare ‘>’ or ‘&’ inside.
‘--’ is its own, unrelated problem and is not really fixable. If you don't need to recover the exact string, just do a replacement to get rid of them (eg. replace with ‘__’).
If you do need to get a string through completely unmolested to a JavaScript that will be reading the contents of the comment, use a string literal:
<!-- 'my-string' -->
which the script can then read using eval(commentnode.data). (Yes, a valid use for eval() at last!)
Then your escaping problem becomes how to put things in JS string literals, which is fairly easily solvable by escaping the ‘'’ and ‘-’ characters:
<!-- 'Bob\x27s\x2D\x2Dstring' -->
(You should probably also escape ‘<’, ‘&’ and ‘"’, in case you ever want to use the same escaping scheme to put a JS string literal inside a <script> block or inline handler.)