I want to match id's of column 1 from column 2.
_________________________________
| uid | profile_id | status |
|------|-------------|-----------
| 1 | 2 | checked |
| 2 | 1 | checked |
| 3 | 4 | unchecked|
| 4 | 1 | unchecked|
| 4 | 3 | checked |
| 1 | 4 | checked |
...
This is my table. I want to show the result of same values that match from id1 to id2 and status is checked. Following is the output:
__________________________
| uid | profile_id | status |
|------|-------------|-----------
| 1 | 2 | checked |
| 2 | 1 | checked |
...
Because id1 1 check the id2 2 and vice versa.
I done the following code.
SELECT
`aa`.`uid` AS `uid`,
`aa`.`profile_id` AS `profile_id`,
`aa`.`match_type` AS `match_type`
FROM
(
`matched_profiles` `aa`
left join `matched_profiles` `ab` on(
(`aa`.`uid` = `ab`.`profile_id`)
)
)
where
(
(`aa`.`uid` = `ab`.`profile_id`)
and (`ab`.`uid` = `aa`.`profile_id`)
);
but above code also show me the unchecked result.
Great question. Because of the structure of the data int this table, you can do this by joining the table to itself. You will have two sets of data, replicas of one another.
You want to make sure there is a two-way match between uid and profile_id.
You also want the status for both directions to be checked
SELECT
a.*
FROM matched_profiles a
inner join matched_profiles a2 on
a.uid = a2.profile_id
and a.profile_id = a2.uid
and a.status = 'checked'
and a2.status = 'checked';
You have a kind of explicit/inexplicit join going on. I reformatted to be completely explicit for clarity. You just need to add a filter to make sure all status values are checked.
Below is the SQL to build your test schema, which is nice to provide when asking these questions for SO users.
create table matched_profiles (
uid int,
profile_id int,
status varchar(18)
);
insert into matched_profiles
values
(1, 2, 'checked'),
(2, 1, 'checked'),
(3, 4, 'unchecked'),
(4, 1, 'unchecked'),
(4, 3, 'checked'),
(1, 4, 'checked');
Related
Assessments table:
+---------------+-----------+---------------------+
| assessment_id | device_id | created_at |
+---------------+-----------+---------------------+
| 1 | 1 | 2022-07-15 20:03:03 |
| 2 | 2 | 2022-07-15 21:03:03 |
| 3 | 1 | 2022-07-15 22:03:03 |
| 4 | 2 | 2022-07-15 23:03:03 |
| 5 | 2 | 2022-07-15 23:03:03 |
+---------------+-----------+---------------------+
Results table:
+---------------+---------+--------+
| assessment_id | test | result |
+---------------+---------+--------+
| 1 | A | PASS |
| 2 | B | FAIL |
| 3 | A | FAIL |
| 4 | B | PASS |
| 5 | B | PASS |
+---------------+---------+--------+
Objective
I would like to return a row for each time the result of a test_id changes.
For example, Device 1 has Assessments 1 and 3. Test A in Assessment 1 was PASS, and Test A in Assessment 3 was FAIL, so we want to return this change as a row.
Device 2 has Assessments 2, 4, and 5. There was a test result change in Assessments 2 and 4 (Test B changed from FAIL to PASS), we want to return a row for this.
We do not want to return a row for Assessment 5 because Test B was PASS, and it was also PASS in Assessment 4. No change.
The resulting table would look like this:
+-----------+---------+------------------------+----------------+----------------------+--------------------+------------+----------------------+
| device_id | test_id | previous_assessment_id | previous_value | previous_value_date | next_assessment_id | next_value | next_value_date |
+-----------+---------+------------------------+----------------+----------------------+--------------------+------------+----------------------+
| 1 | A | 1 | PASS | 15/07/2022 20:03:03 | 3 | FAIL | 15/07/2022 22:03:03 |
| 2 | B | 2 | FAIL | 15/07/2022 21:03:03 | 4 | PASS | 15/07/2022 23:03:03 |
+-----------+---------+------------------------+----------------+----------------------+--------------------+------------+----------------------+
I've tried playing around with a couple of queries found here on SO, but they either took a long time and returned the wrong data, or didn't work at all. I don't think this is a duplicate because I'm using multiple tables, and every other question I've seen refers to a single table.
I've also looked at this SO question but could not get the helpful answer to apply to my situation.
I'm having some weird issue getting SQL Fiddle to work, but here is the test schema I've been tinkering with:
CREATE TABLE `assessments` (
`id` int,
`device_id` int,
`created_at` datetime
);
INSERT INTO `so_assessments` (`id`, `device_id`, `created_at`) VALUES (1, 1, '2022-07-09 22:56:00');
INSERT INTO `so_assessments` (`id`, `device_id`, `created_at`) VALUES (2, 2, '2022-07-10 22:56:06');
INSERT INTO `so_assessments` (`id`, `device_id`, `created_at`) VALUES (3, 1, '2022-07-11 22:56:11');
INSERT INTO `so_assessments` (`id`, `device_id`, `created_at`) VALUES (4, 2, '2022-07-12 22:56:17');
INSERT INTO `so_assessments` (`id`, `device_id`, `created_at`) VALUES (5, 2, '2022-07-13 22:56:24');
CREATE TABLE `results` (
`assessment_id` int,
`test` enum('A','B'),
`result` enum('PASS','FAIL')
);
INSERT INTO `results` (`assessment_id`, `test`, `result`) VALUES (1, 'A', 'PASS');
INSERT INTO `results` (`assessment_id`, `test`, `result`) VALUES (2, 'B', 'FAIL');
INSERT INTO `results` (`assessment_id`, `test`, `result`) VALUES (3, 'A', 'FAIL');
INSERT INTO `results` (`assessment_id`, `test`, `result`) VALUES (4, 'B', 'PASS');
INSERT INTO `results` (`assessment_id`, `test`, `result`) VALUES (5, 'B', 'PASS');
If you are using MySQL 8, Window functions can help. https://dev.mysql.com/doc/refman/8.0/en/window-function-descriptions.html
You can partition your results by device and test, and add a column that is the previous value of the result, then use the last row where the result differs from the previous value.
The following query creates a new column in your results with previous_value
SELECT
assessment_id,
device_id,
test,
result,
LAG (result) over w as `previous_value`,
LAG (assessment_id) over w as `previous_assessment_id`
FROM assessments join results using(assessment_id)
WINDOW w AS (PARTITION BY device_id, test ORDER BY assessment_id)
Yields the result:
+---------------+-----------+------+--------+----------------+------------------------+
| assessment_id | device_id | test | result | previous_value | previous_assessment_id |
+---------------+-----------+------+--------+----------------+------------------------+
| 1 | 1 | A | PASS | NULL | NULL |
| 3 | 1 | A | FAIL | PASS | 1 |
| 2 | 2 | B | FAIL | NULL | NULL |
| 4 | 2 | B | PASS | FAIL | 2 |
| 5 | 2 | B | PASS | PASS | 4 |
+---------------+-----------+------+--------+----------------+------------------------+
Which is a big part of the battle. Now we need to take that result and find the row for each device/test pair with the highest assessment_id, where result != previous_value.
The window is calculated after GROUP BY, ORDER BY, and even HAVING, so there's not much more that can be done in that query (that I have thought of) to narrow it down to the only the most recent entries for each device/test pair. So the above will have to be a subquery to get the final result.
Note: I am going to assume that if the result never changes, you want to show the first time that result was recorded. In other words, you want to count results with previous_value = NULL as a transition.
Here's a query that lists all the times the test result from a device/test pair changes:
SELECT * FROM
(SELECT
assessment_id,
device_id,
test,
result,
LAG (result) over w as `previous_value`
FROM assessments join results using(assessment_id)
WINDOW w AS (PARTITION BY `device_id`, `test` ORDER BY `assessment_id`)
) AS t
WHERE result != `previous_value` OR `previous_value` IS NULL
gets the result (I left out previous_assesssment_id and the others for space):
+---------------+-----------+------+--------+----------------+
| assessment_id | device_id | test | result | previous_value |
+---------------+-----------+------+--------+----------------+
| 1 | 1 | A | PASS | NULL |
| 3 | 1 | A | FAIL | PASS |
| 2 | 2 | B | FAIL | NULL |
| 4 | 2 | B | PASS | FAIL |
+---------------+-----------+------+--------+----------------+
EDIT
That's the answer to the question. If the first time the value is set is not of interest, just delete the OR part of the WHERE clause. There rest of this answer is because I convinced myself the problem was to get the MOST RECENT time the value flipped. I'm leaving it here, but only for interest.
Carrying On
This is all the times the outcome was different than previous, plus the first time a result was recorded. Almost there.
It would be tempting at this point to add another window in the outer query to aggregate the rows from above and identify the correct rows. But at least in MySQL 8, nested windows are not supported.
But given that result, we can create a query using MAX() and GROUP BY that gives the assessment_ids of all the rows we ultimately want:
SELECT MAX(assessment_id)
FROM (
SELECT
assessment_id,
device_id,
test,
result,
LAG (result) over w as `previous_value`,
LAG (assessment_id) over w as `previous_assessment_id`
FROM assessments join results using(assessment_id)
WINDOW w AS (PARTITION BY device_id, test ORDER BY assessment_id)
) AS t
where result != previous_value OR previous_value IS NULL
GROUP BY device_id, test
Which yields:
+--------------------+
| MAX(assessment_id) |
+--------------------+
| 3 |
| 4 |
+--------------------+
Now we know exactly which rows we need; but we built all that data about the previous values, and now we need a way to join the result of that query with the result of the subquery.
Happily, MySQL 8 has a way to stash a query and use it multiple times, called Common Table Expressions, that use the WITH clause docs here. So we can create the table with all the fun data, then use it as a subquery to get the id's we ultimately want, and then join that right back with the results we just created:
WITH
transitions AS (SELECT
assessment_id,
device_id,
test,
result,
LAG (result) over w as `previous_value`,
LAG (assessment_id) over w as `previous_assessment_id`
FROM assessments join results using(assessment_id)
WINDOW w AS (PARTITION BY device_id, test ORDER BY assessment_id)
)
SELECT transitions.*
FROM transitions
JOIN (
SELECT MAX(assessment_id) as assessment_id
FROM transitions
WHERE result != previous_value OR previous_value IS NULL
GROUP BY device_id, test
) AS t2 using (assessment_id)
Giving us the final answer (with the other columns you can fill in):
+---------------+-----------+------+--------+----------------+------------------------+
| assessment_id | device_id | test | result | previous_value | previous_assessment_id |
+---------------+-----------+------+--------+----------------+------------------------+
| 3 | 1 | A | FAIL | PASS | 1 |
| 4 | 2 | B | PASS | FAIL | 2 |
+---------------+-----------+------+--------+----------------+------------------------+
The first part creates a data set that includes all the information about what came before each test. Then we write a query that gets the id's of the interesting rows in that query, then we join back to the original data set to fill in all the columns.
You can use windows functions to peek at values of previous or successive rows according to an ordering and grouping.
For example:
select *
from (
select
a.device_id,
r.test,
a.id as prev_assessment_id,
r.result as prev_result,
a.created_at as prev_value_date,
lead(a.id) over(partition by a.device_id
order by a.created_at) as next_assessment_id,
lead(r.result) over(partition by a.device_id
order by a.created_at) as next_result,
lead(a.created_at) over(partition by a.device_id
order by a.created_at) as next_value_date
from assessments a
join results r on r.assessment_id = a.id
) x
where prev_result <> next_result
Result:
device_id test prev_assessment_id prev_result prev_value_date next_assessment_id next_result next_value_date
---------- ----- ------------------- ------------ -------------------- ------------------- ------------ -------------------
1 A 1 PASS 2022-07-09 22:56:00 3 FAIL 2022-07-11 22:56:11
2 B 2 FAIL 2022-07-10 22:56:06 4 PASS 2022-07-12 22:56:17
See running example at db<>fiddle.
Note: Your setup queries (that I used) include different data, compared to your expected result.
I'm pretty new to SQL and am currently trying to run a query which will return the total count of a value under a certain limit (using phpmyadmin).
Say we've got a table like so:
CarID | Car | OwnerID
-------------------
1 | Name | 1
2 | Name | 3
3 | Name | 2
4 | Name | 1
Now I would like to be able to get the total count of cars a owner has if it's under let's say 2 - to then get this:
OwnerID| TotalCars |
---------------------
2 | 1 |
3 | 1 |
How would I accomplish this? My situation is slightly different than the example I gave but it's fundamentally the same exact goal but just different numbers and more records.
When I try, those with more than the number I wish to see return with zero as their value??
(My code)
Code giving me trouble
(My result)
ID 6 has 3 properties so it shouldn't be showing me it at all and I don't understand why it's returning it as 0
You can use GROUP BY COUNT and HAVING
CREATE TABLE Table1
(`CarID` int, `Car` varchar(4), `OwnerID` int)
;
INSERT INTO Table1
(`CarID`, `Car`, `OwnerID`)
VALUES
(1, 'Name', 1),
(2, 'Name', 3),
(3, 'Name', 2),
(4, 'Name', 1)
;
SELECT `OwnerID`, COUNT(*) as countr
FROM Table1
GROUP BY `OwnerID`
HAVING countr < 2
OwnerID | countr
------: | -----:
3 | 1
2 | 1
db<>fiddle here
Fiddle: http://sqlfiddle.com/#!9/4d4288/6
DDL and DML:
CREATE TABLE User(
id INT,
Name VARCHAR(50)
);
INSERT INTO User (id, Name)
VALUES
(1, 'Name 1'),
(2, 'Name 2'),
(3, 'Name 3');
CREATE TABLE Log(
Id INT,
Description VARCHAR(255));
INSERT INTO Log (id, Description)
VALUES
(1, 'This is issue 1 ...'),
(2, 'This is issue 2 ...'),
(3, 'This is issue 3 ...'),
(4, 'This is issue 3 ...');
CREATE TABLE LogActions(
id INT,
LogID INT,
UserID INT,
Status ENUM('Approved', 'Refused'));
INSERT INTO LogActions (id, LogID, UserID, Status)
VALUES
(1,1,1,'Approved'),
(2,1,2,'Approved'),
(3,2,1,'Approved'),
(4,2,3,'Approved');
Output
SELECT
l.id,
l.description,
u.name,
la.status
FROM Log l
LEFT JOIN
LogActions la ON l.id = la.LogID
LEFT JOIN
User u ON u.id = la.UserID
---------------------------------------------
id description name status
1 This is issue 1 ... Name 1 Approved
1 This is issue 1 ... Name 2 Approved
2 This is issue 2 ... Name 1 Approved
2 This is issue 2 ... Name 3 Approved
3 This is issue 3 ... (null) (null)
4 This is issue 4 ... (null) (null)
Summary
Here I can see which user marked specific log number and also which records havent.
Within the .NET application, I ensure the records are marked by 2 different users and no more than 2 records are checked off.
Goal
This is my desired output.
id description name1 name2 status1 status2
1 This is issue 1 ... Name 1 Name 2 Approved Approved
2 This is issue 2 ... Name 1 Name 3 Approved Approved
3 This is issue 3 ... (null) (null) (null) (null)
4 This is issue 4 ... (null) (null) (null) (null)
This is what I aim to achieve. Essentially, I am needing to see 1 of each log number id, and on the same row show the users name and status that have/haven't marked this record.
This is the best solution I have at the moment, I'll be happy to hear for any alternatives.
Purpose
The main purpose of this is to have each log number in 1 row instead of multiple and visually inspect who has marked it or whether it is blank.
With FIRST_VALUE() window function:
SELECT DISTINCT
l.id,
l.description,
FIRST_VALUE(u.name) OVER (PARTITION BY l.id ORDER BY la.id) name1,
FIRST_VALUE(u.name) OVER (PARTITION BY l.id ORDER BY la.id DESC) name2,
FIRST_VALUE(la.status) OVER (PARTITION BY l.id ORDER BY la.id) status1,
FIRST_VALUE(la.status) OVER (PARTITION BY l.id ORDER BY la.id DESC) status2
FROM Log l
LEFT JOIN LogActions la ON l.id = la.LogID
LEFT JOIN User u ON u.id = la.UserID
See the demo.
Results:
> id | description | name1 | name2 | status1 | status2
> -: | :------------------ | :----- | :----- | :------- | :-------
> 1 | This is issue 1 ... | Name 1 | Name 2 | Approved | Approved
> 2 | This is issue 2 ... | Name 1 | Name 3 | Approved | Approved
> 3 | This is issue 3 ... | null | null | null | null
> 4 | This is issue 4 ... | null | null | null | null
So, lets say I have a table called "imports" that looks like this:
| id | importer_id | total_m | total_f |
|====|=============|=========|=========|
| 1 | 1 | 100 | 200 |
| 1 | 1 | 0 | 200 |
And I need the query to return it pivoted or transposed (rows to columns) in this way:
| total_m | sum(total_m) |
| total_f | sum(total_f) |
I can't think on a way to do this without using another table (maybe a temporary table?) and using unions, but there should be a better way to this anyway (maybe with CASE or IF?).
Thanks in advance.
select 'total_m', sum(total_m) from imports
union
select 'total_f', sum(total_f) from imports
http://sqlfiddle.com/#!9/fc1c0/2/0
You can "unpivot" by first expanding the number of rows, which is done below by cross joining a 2 row subquery. Then on each of those rows use relevant case expression conditions to align the former columns to the new rows ("conditional aggregates").
SQL Fiddle
MySQL 5.6 Schema Setup:
CREATE TABLE imports
(`id` int, `importer_id` int, `total_m` int, `total_f` int)
;
INSERT INTO imports
(`id`, `importer_id`, `total_m`, `total_f`)
VALUES
(1, 1, 100, 200),
(1, 1, 0, 200)
;
Query 1:
select
*
from (
select
i.importer_id
, concat('total_',cj.unpiv) total_type
, sum(case when cj.unpiv = 'm' then total_m
when cj.unpiv = 'f' then total_f else 0 end) as total
from imports i
cross join (select 'm' as unpiv union all select 'f') cj
group by
i.importer_id
, cj.unpiv
) d
Results:
| importer_id | total_type | total |
|-------------|------------|-------|
| 1 | total_f | 400 |
| 1 | total_m | 100 |
The behaviour I want to replicate is like grep with -A and -B flags .
eg grep -A 2 -B 2 "hello" myfile.txt will give me all the lines which have "hello" in them, but also 2 lines before and 2 lines after it.
Lets assume this table schema :
+--------+-------------------------+
| id | message |
+--------+-------------------------+
| 1 | One tow three |
| 2 | No error in this |
| 3 | My testing message |
| 4 | php module test |
| 5 | hello world |
| 6 | team spirit |
| 7 | puzzle game |
| 8 | social game |
| 9 | stackoverflow |
|10 | stackexchange |
+------------+---------------------+
Now a query like :
Select * from theTable where message like '%hello%' will result in :
5 | hello world
How can I put another parameter "N" which selects N rows before, and N rows after the matched record i.e. for N = 2, the result should be :
| 3 | My testing message |
| 4 | php module test |
| 5 | hello world |
| 6 | team spirit |
| 7 | puzzle game |
For simplicity assume 'like %TERM%' matches only 1 row .
Here the result is supposed to be sorted on auto-increment id field.
Right, this works for me:
SELECT child.*
FROM stack as child,
(SELECT idstack FROM stack WHERE message LIKE '%hello%') as parent
WHERE child.idstack BETWEEN parent.idstack-2 AND parent.idstack+2;
Don't know if this is at all valid MySQL but how about
SELECT t.*
FROM theTable t
INNER JOIN (
SELECT id FROM theTable where message like '%hello%'
) id ON id.id <= t.id
ORDER BY
ID DESC
LIMIT 3
UNION ALL
SELECT t.*
FROM theTable t
INNER JOIN (
SELECT id FROM theTable where message like '%hello%'
) id ON id.id > t.id
ORDER BY
ID
LIMIT 2
Try this simple one (edited) -
CREATE TABLE messages(
id INT(11) DEFAULT NULL,
message VARCHAR(255) DEFAULT NULL
);
INSERT INTO messages VALUES
(1, 'One tow three'),
(2, 'No error in this'),
(3, 'My testing message'),
(4, 'php module test'),
(5, 'hello world'),
(6, 'team spirit'),
(7, 'puzzle game'),
(8, 'social game'),
(9, 'stackoverflow'),
(10, 'stackexchange');
SET #text = 'hello world';
SELECT id, message FROM (
SELECT m.*, #n1:=#n1 + 1 num, #n2:=IF(message = #text, #n1, #n2) pos
FROM messages m, (SELECT #n1:=0, #n2:=0) n ORDER BY m.id
) t
WHERE #n2 >= num - 2 AND #n2 <= num + 2;
+------+--------------------+
| id | message |
+------+--------------------+
| 3 | My testing message |
| 4 | php module test |
| 5 | hello world |
| 6 | team spirit |
| 7 | puzzle game |
+------+--------------------+
N value can be specified as user variable; currently it is - '2'.
This query works with row numbers, and this guarantees that the nearest records will be returned.
Try
Select * from theTable
Where id >=
(Select id - variableHere from theTable where message like '%hello%')
Order by id
Limit (variableHere * 2) + 1
(MS SQL Server only)
The most reliable way would be to use the row_number function that way it doesn't matter if there are gaps in the id. This will also work if there are multiple occurances of the search result and properly return two above and below each result.
WITH
srt AS (
SELECT ROW_NUMBER() OVER (ORDER BY id) AS int_row, [id]
FROM theTable
),
result AS (
SELECT int_row - 2 AS int_bottom, int_row + 2 AS int_top
FROM theTable
INNER JOIN srt
ON theTable.id = srt.id
WHERE ([message] like '%hello%')
)
SELECT theTable.[id], theTable.[message]
FROM theTable
INNER JOIN srt
ON theTable.id = srt.id
INNER JOIN result
ON srt.int_row >= result.int_bottom
AND srt.int_row <= result.int_top
ORDER BY srt.int_row
Adding an answer using date instead of an id.
The use-case here is an on-call rotation table with one record pr week.
Due to edits the id might be out of order for the purpose intended.
Any use-case having several records pr week, pr date or other will of course have to be mended.
+----------+--------------+------+-----+---------+----------------+
| Field | Type | Null | Key | Default | Extra |
+----------+--------------+------+-----+---------+----------------+
| id | int(11) | NO | PRI | NULL | auto_increment |
| startdate| datetime | NO | | NULL | |
| person | int(11) | YES | MUL | NULL | |
+----------+--------------+------+-----+---------+----------------+
The query:
SELECT child.*
FROM rota-table as child,
(SELECT startdate
FROM rota-table
WHERE YEARWEEK(startdate, 3) = YEARWEEK(now(), 3) ) as parent
WHERE
YEARWEEK(child.startdate, 3) >= YEARWEEK(NOW() - INTERVAL 25 WEEK, 3)
AND YEARWEEK(child.startdate, 3) <= YEARWEEK(NOW() + INTERVAL 25 WEEK, 3)